Hi
I have a swedish version of the x7500 / Advantage and they have disabled the block recognizer in that version.
I know there is some reg fix for it but i cant find it anywhere.
So plz help me find the fix or mabey someone can tell me what i should change in the registry to get it back...
Thanks
/Magnus
Sebulba_se said:
Hi
I have a swedish version of the x7500 / Advantage and they have disabled the block recognizer in that version.
I know there is some reg fix for it but i cant find it anywhere.
So plz help me find the fix or mabey someone can tell me what i should change in the registry to get it back...
Thanks
/Magnus
Click to expand...
Click to collapse
If you have Tweaks2k2, there is a setting to unhide the block recognizer.
That failing, your right it is just a reg hack. Perhaps someone else here will know what to change, as I don't.
Tweaks2k2
I have tweaks2k2 and i have tried that one but the page where i should be able to chek the box to show block recognizer is greyed out (disabled).
I thougt that tweaks wasnt up to date to fix x7500.
So mabey i should send a mail to tweaks...
Thanks
Magnus
Thats strange. I have it shown and selected under keyboard tricks. I just tested it and the block recognizer works.
I'm using v3.26.0.0 on the English language Advantage, so I can confirm this arrangement works. Oh, thats right, you said you had the swedish version. I wonder why the registry would be different in that respect? I'm sorry I couldn't help out more.
clsid is missing
Hi and thanks mysticbluebmw
I think they have removed the clsid from the registry in the swedish version so i think that is the problem.
Anychance you can check the clsid in yours and look what keys that are in it.
Then i can try to recreate them and see if it shows up in the siplist.
If possible i want the blockrecognizer.
I know that if you have a phone bought from dangaard you can download the fix from their site. In sweden the site is www.smartmobile.se
Cya
Magnus
according to microsoft, the handwriting recognition is only available on WM5 in certain languages.
English
French
German
Spanish
Italian
Brazilian Portuguese
There are of course others for the asain languages, like CHT, CHS, Japanese and Korean, but other than that, you are best looking for a third party solution like penreader.
The block recognizer is availible in swedish.
I just need to get the regfix to make it visible again.
I have done the same with a Qtek9100 before.
Not sure if the same fix will work because i cant find it again
I let you all know if i make it work.
/Magnus
Oh, I looked through HKCR/CLSID, and found this entry which I exported for you to take a look at (renamed .reg to .txt)
If that does't help, I don't know if your problem may be of a similar nature, but some fellows had some hard times switching between inputs quickly. This solution worked wonders for them. They guessed it might have have gotten rid of the permissions. If you don't want to try it, thats cool, I just thought, it couldn't hurt.
1. Export HKCR\CLSID (will save to a *.reg file)
2. Del or Rename HKCR\CLSID
3. Import the backup of HKCR\CLSID
Turn off your device about 15 sec and reset .
OR.......
- renaming the CLSID to something else (say CLSIDbak)
- save the changes
- turn it off for 10 seconds
- rename it back to CLSID
- save the changes
- turn it off for 10 seconds
Good Luck!!!
Thanks
It's getting closer now...
Now I have it in the list but I cant select it
So ill keep working on it.
Cya
Thanks a lot i have it up and running now.
I did use your reg-file but i hade to change 2 things in it.
I needed to change DefaultIcon to "msimsw.dll,0"
and also InprocServer32 to "msimsw.dll"
So i guess if you have other languages that dont have Block Recognizer take a look on your keybord and se what defaultvalue the InprocServer32 has and use that for the Block Recognizer (that you get from the txt file we got from mysticbluebmw).
So once again Thanks a log...
Cya
/Magnus
PS now i will take care of my netx problem but that will be another thread, so ill hope ill cya there...
Block recognizer in POLISH WM5
Hello Guys,
I have the same problem - I cannot see the Block Recognizer on the list, I have imported they posted REG key, now I have on the list but I can not select it.
The problem is that in the Windows directory there is no msim.dll nor msimsw.dll
I have other Ameo that I can copy it from but I am unable to copy or rename or duplicate - it allways give me the error mesage. Anyone of You know where can I get msim.dll from??
Solved
Sometimes I have to look twice in the directory..... There is of course msimPL.dll in the Windows dir. Just modify the reg file posted few posts earlier to msimpl.dll in two places, import, softreset and ... it WORKS
due to popular demand (my own really, hehe) and sanction from the man himself, here is a new thread dedicated specifically to Asukal's MUI projects for the Hermes, specifically the japanese X01HT. this is a spin-off of this thread: http://forum.xda-developers.com/showthread.php?t=284765 .
below, i've made a cliff-notes of sorts, with links to the various MUI related files within the original thread. the original files remain on that thread for the time being.
MUI relevant posts:
English MUIs:
http://forum.xda-developers.com/showpost.php?p=1077551&postcount=64
http://forum.xda-developers.com/showpost.php?p=1080864&postcount=116
http://forum.xda-developers.com/showpost.php?p=1081165&postcount=119
http://forum.xda-developers.com/showpost.php?p=1100956&postcount=195 *HTC-Z*
German MUIs:
http://forum.xda-developers.com/showpost.php?p=1078882&postcount=90
Security warning:
http://forum.xda-developers.com/showpost.php?p=1078954&postcount=97
http://forum.xda-developers.com/showpost.php?p=1079158&postcount=102
Remove Japanese 'Today' Items:
http://forum.xda-developers.com/showpost.php?p=1080487&postcount=115
English Soft Keyboard:
http://forum.xda-developers.com/showpost.php?p=1081257&postcount=122
http://forum.xda-developers.com/showpost.php?p=1082056&postcount=134
Japanese to English Bubble fix:
http://forum.xda-developers.com/showpost.php?p=1082823&postcount=141
Transcriber:
http://forum.xda-developers.com/showpost.php?p=1083600&postcount=148
http://forum.xda-developers.com/showpost.php?p=1083697&postcount=152
English Today Keys Fix:
http://forum.xda-developers.com/showpost.php?p=1108577&postcount=202
Info about uninstall/hard-reset:
http://forum.xda-developers.com/showpost.php?p=1109289&postcount=204
Terminal Services Client:
http://forum.xda-developers.com/showpost.php?p=1119779&postcount=217
Softbank MMS Program English Translation:
http://forum.xda-developers.com/showpost.php?p=1172374&postcount=257
http://forum.xda-developers.com/showpost.php?p=1172472&postcount=261
English Video Call Button:
http://forum.xda-developers.com/showpost.php?p=1089229&postcount=176
i'll try to keep this post up-to-date and either transfer the files or direct links to the files to this post, but for now, continue to refer back to that thread for nitty-gritty details. hope you all find this useful!
If I get some time in the next few weeks (50% chance), I will see if I can repackage some of Asukal's original CAB files to avoid requiring post-installation patches and to reduce the number of separate cab files (which would also reduce memory space required).
....if Asukal is OK with this...
Could you repack LetsJapanNo5 & IME31J_QVGA together?
Also, anybody have problems with MMSLite on WM6 ROMs?
PLS DONT INSTAL or USE on Xo1H <Toshiba Device>
this is not compatible for Toshiba or any other device with WM6.
Zgembo said:
Could you repack LetsJapanNo5 & IME31J_QVGA together?
Also, anybody have problems with MMSLite on WM6 ROMs?
Click to expand...
Click to collapse
hi, thanks guys,
and i have merged Lets Japan and IME long time ago for Test
i will find the file where i stored,, so many files in my HDD,
and can not remenber that.(not organized my PC
khammo01 said:
If I get some time in the next few weeks (50% chance), I will see if I can repackage some of Asukal's original CAB files to avoid requiring post-installation patches and to reduce the number of separate cab files (which would also reduce memory space required).
....if Asukal is OK with this...
Click to expand...
Click to collapse
hi, of curse i say OK you to repack as your want
(but i dont know SB&MS Axis power will say OK )
i think only one cab "Welcom_Darkside_R6.zip" was included
all patches, but cabs for securities,
and you can extract canbs with CAB manager (trial version is enough)
http://www.ocpsoftware.com
Good luck!
does this work with WM6? It would be great to have an English interface for the Japanese Rom I installed. It would just be much easier than following the guide to installing Jap. keyboard, language, mail, softbank settings, etc etc for the English version of WM6.
Asukal,
I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.
The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.
Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?
Does anyone in here also encountered this issue.
Thanks
well, i never did relay back my experience with the english MUI setup, but i was able to successfully install it. actually, at first, darkside6 didn't work for me immediately after installing the cab. rather, what i had to do (as one post in the previous thread tipped me off) was to find the extracted individual cabs in the temporary files folder and install them separately. after that and a soft reset, things seemed to be installed fine. most menus were changed to english (with the exception of the menus in the Softbank mail program and some drop-down menus, and shortcuts in settings).
one thing i wasn't sure about though- well, actually two. first, for the clock. i changed it so it shows a 12 hour clock instead of a 24 hour clock... but there is no AM or PM following the time? is that how it displays on native english roms? second, i've heard some people say that to get rid of the english menus and revert back to japanese, you have to do a hard reset. does this mean that it's safe to uninstall the programs listed in the installed programs list related to the MUI? i'm not a fan of hardresetting, and would like to avoid screwing up my quite functional setup if it's not necessary. but if its just taking up unnecessary space...
tora201 said:
does this work with WM6? It would be great to have an English interface for the Japanese Rom I installed. It would just be much easier than following the guide to installing Jap. keyboard, language, mail, softbank settings, etc etc for the English version of WM6.
Click to expand...
Click to collapse
i tried this in WM6 (Hermes) and worked.
try to install enable_rapi.can before this,
and will work(some MUI doesnt in this for WM6, still keep english them)
Asukaly yours!
achilles21 said:
Asukal,
I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.
The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.
Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?
Does anyone in here also encountered this issue.
Thanks
Click to expand...
Click to collapse
possiblity, 1st deleat Paring device when yors were English Lacation,
and try to sync after Japanese Location(not sure)
also i hard similar bug, and he could fix that with registry tweak.
(no exactly information what registry was tweaked)
Hello Asukal! I come to you again for help!
There are two things that I still have problems with while making English ROM Japanese friendly:
1º)I have Japanese I/O enabled, with "Roma/Kana" SIP by default (via SIP change of Sheult). But when I open a program, always "hiragana" write is default one, and I need to change to "romanji" (normal English input); but no I idea how to do it (><)
That isn't put "Keyboard" SIP for english input; it's Japanese input, but romanji by default. I hope I explain myself.
2º)[less important] Is there any way to make Pocket IE to work with Yahoo! Keitai (brose the Web pages of Yahoo! Keitai)
Thanks!
PD: After read this thread, I have two small questions (really less important; just curious):
a)LetsJapanNo6.zip: New CAB for make Softbank Hermes from JP to English without flash I suppose, no?
a1)Want does exactly do the Treo version?
b)You translate Softbank mail app to English, but only works in original ROMs because of certificates?
And the last one ... Any advance in MMS after MMS Lite? Last times I only checked WM6 Forum, and I think I lose many news form this forum.
Really thanks for all!!
Asukal said:
hi, thanks guys,
and i have merged Lets Japan and IME long time ago for Test
i will find the file where i stored,, so many files in my HDD,
and can not remenber that.(not organized my PC
Click to expand...
Click to collapse
hi asukal..
did u find the file yet?..
sorry if u have posted it anywhere else..
achilles21 said:
Asukal,
I tried Lets Japan with english WM6,
succesfully installed and working.
There is only one issue that I found after
installing Lets Japan on WM6, I can't sync my
Windows Live account via wifi anymore.
But after I remove Lets Japan,
my Windows Live can then sync again via
wifi.
The error stated that I don't have
access plan from my provider.
Wherein I think windows live can use
both data and wifi connection, or whichever
is available.
Is it because of the localization or are there
any reg mod needed to make it work and
have my windows live sync via wifi ?
Does anyone in here also encountered this issue.
Thanks
Click to expand...
Click to collapse
:O I had installed Letsjapan 5 and happens the same, and I couldn't connect to msn, with the same error you said.
so I tried, unistall it, and works. Then I just installed Letsjapan6 , and still can connect to windows live MSN
I didn't realize that could be the problem Thanks.
And thanks Asukal for LetsJapan x
sesaru said:
I have Japanese I/O enabled, with "Roma/Kana" SIP by default (via SIP change of Sheult). But when I open a program, always "hiragana" write is default one, and I need to change to "romanji" (normal English input); but no I idea how to do it (><)
That isn't put "Keyboard" SIP for english input; it's Japanese input, but romanji by default. I hope I explain myself.
Click to expand...
Click to collapse
No idea about this?
sesaru said:
No idea about this?
Click to expand...
Click to collapse
sorry late reply coze of returned to Japan for a while.
1:http://tillanosoft.com/ce/ptweak.html
and DL Pocket Tweak.
2:Go to Settings-System, and you can find PocketTweak Icon..
(make soft reset if you couldnt find it)
3:Open it and go to the [SIP] tab,
and tick the [Keyboard] & tap the [Make as Default input] or some like that.
4:then you can get English Keyboard as default.
But not English predict was available, coze Japanese Key was enabled.
I suggest do not tick to appear so many keyboard with this.
So many Keyboard will make troubles against OS.
As minimum as you can,
-----------------------------------------------------------------
@Lets Japan No6 is for japanese Localize on English device, not for Japanese OS.
--------------------------------------------------------------------
Asuklay yours!
mexec said:
hi asukal..
did u find the file yet?..
sorry if u have posted it anywhere else..
Click to expand...
Click to collapse
sorry, i found this, and tested on my device.
not worked,
have to remake this,
PLS wait, but i am so busy this season, can not say when...
Asukal said:
sorry late reply coze of returned to Japan for a while.
1:http://tillanosoft.com/ce/ptweak.html
and DL Pocket Tweak.
2:Go to Settings-System, and you can find PocketTweak Icon..
(make soft reset if you couldnt find it)
3:Open it and go to the [SIP] tab,
and tick the [Keyboard] & tap the [Make as Default input] or some like that.
4:then you can get English Keyboard as default.
But not English predict was available, coze Japanese Key was enabled.
I suggest do not tick to appear so many keyboard with this.
So many Keyboard will make troubles against OS.
As minimum as you can,
-----------------------------------------------------------------
@Lets Japan No6 is for japanese Localize on English device, not for Japanese OS.
--------------------------------------------------------------------
Asuklay yours!
Click to expand...
Click to collapse
Hello!
Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.
-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?
Bye!
Sesaru
sesaru said:
Hello!
Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.
-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?
Bye!
Sesaru
Click to expand...
Click to collapse
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- Ａ-A] ?
if so, see this---
HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1
or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html
just change the Value
半角英数 instead of 全角かな
＠Lets Japan is just encoding and font for English device.
not included Input system.
@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm
@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm
sesaru said:
Hello!
Two things:
-About IME, I know what you told me. What I asked you is different. It's have the Roma/Kana option by default (or any that let you know Japanese, instead of "Keyboard"). But you know it have 5 options (Hiragana, 2 Katakana and 2 Romanjis). By default is always Hiragana. I want to change to Romanji.
-About "@Lets Japan No6 ", thah makes your device a Japanese one (fonts+japanese imput), of a softbank one?
Bye!
Sesaru
Click to expand...
Click to collapse
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- Ａ-A] ?
if so, see this---
HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1
or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html
just change the Value
半角英数 instead of 全角かな
＠Lets Japan is just encoding and font for English device.
not included Input system.
@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm
@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm
Asukal said:
@you meant toggle input chalactors?
Like [あ-ぁ-ア-ァ- Ａ-A] ?
if so, see this---
HKCU\SOFTWARE\Microsoft\IMEJP\3.1\MSIME
Option3
change to C instead 1
or, use the utlity XO1HTTweak.exe from here
http://www.nkozawa.com/html/WinMobileX01HTweak.html
just change the Value
半角英数 instead of 全角かな
＠Lets Japan is just encoding and font for English device.
not included Input system.
@Inputsyetem is here
http://hn801.hkes.com/Data/blog/WM5_IME.htm
@Other localize set is
http://www.geocities.jp/asukal_trader/Localize/localizecab.htm
or
http://www.asukal.jp/English/LocalizeCABS.htm
Click to expand...
Click to collapse
Asukal, I really love you!! I was asking for this many many times, and nobody know it!! (^-^)
There is more thing to make my WM6 perfect, and also one question that maybe you can help me
-I tries many times to make Pockect IE to work with Yahoo! Keitai of softbank but not way. Maybe you know how to do it.
-For MMS, I have MMSLite. I hace flat rate of softbank (1man yen). I'm not sure if MMS Lite use standar Softbank connect, or use any that mabe will charge more money to me (more than that 10.000 yen guari)
Thanks a lot!!!!!!!!!!
Sesaru
Here the solution:
Resolved, working on Italian Rom.
Intall all 3 original package, no extra language is required.
not launch Real Vga.
Browse Windows on pda.
rename msim.128.dll to msimit.128.dll
rename msim.192.dll to msimit.192.dll
rename msim.96.dll to msimit.96.dll
launch Real Vga, and enjoy
Working very fine on my Athena X7500, bye all
Good rematk, energy..........
My X7500 is perfectly running with RealVGA without a specific lanmguage pack........ Change those names and go.... no other tricks.
I say that's extraodinary.......
Thanks mate, tank'you for testing my discovery mode, bye
SIP Mapping lost
Hi Energy,
I tried your method and all works fine with 128dpi resolution.
One issue only: my default sip (virtual keyboard) lost all mapping keys. I think that now it show the correct italian layout but when I tap some key I get wrong typing (like " and not @).
Any idea?
Thanks in advance for your help and "scusa per il mio inglese davvero terribile" (sorry for my terrible english).
Ciao
Maurizio
Can this be done to swedish as well?
I tried to change the names and adding "SW" to the names, but nothing happend.
Anyone can help me out??
wait investigating..... bye
energy59
Thanks a lot! Highly appreciated Ill be waiting with entusiasm then!
keyboard problem - shift+key characters
Thanks, it works well!
Just a detail: on my i780 Real Vga has changed the keyboard and this one has not the right characters when you use the shift key (i.e.: on "3" there isn't "£", etc.)
what about you?
thx
energy59 said:
Browse Windows on pda.
rename msim.128.dll to msimit.128.dll
rename msim.192.dll to msimit.192.dll
rename msim.96.dll to msimit.96.dll
Click to expand...
Click to collapse
on my i780 there aren't msim.xxx.dll files in windows directory...
i can't find them... where are they???
Thanks.
I currently use the erofich rom wm6.1 standard: http://forum.xda-developers.com/showthread.php?t=422605 and im trying to get the chinese installed but after i install the cab, nothing happens.
here is where i got the cab file, i tried both the t9 on the top and the one made by some other guy. unfortunately when i hold * to change the language, only russian shows. anyone know whats happening? how do i use a t9 language?
http://melgurth.ovh.org/index.php?page=downloads
after installing the right cab you als have to modify the registry:
[HKEY_LOCAL_MACHINE\T9 Input Method\MUI\Languages]
add to "Available" the correct language code. This is a 4 digit code, i don't know the right one for Chinese, but you'll be able to find it somewhere around here.
restart your device and the added language will show up when you press *
Hi there,
before t9 is available, you have to install t9 english first to enable t9 chinese ... at least for my phone ... i am using same 6.1 std rom ....
so you are saying i need to convert to t9 instead of xt9 first and then add the registry key? is it possible to just use xt9 english + t9 chinese or no? that language combo number is hard to find..
Yes, convert to t9 first:
http://forum.xda-developers.com/showthread.php?t=390709&page=2
then you can install the cab for chinese and modfy the registry
Is possible to change to spanish language ?
Hi
I've a cingular 3125 with rom of erofich, and i try change language to spanish, i download a file t9 spanish.cab from http://melgurth.ovh.org/index.php?page=downloads and put it on \windows folder, choise it, with windows file, and i install, the program said that's install is complete or fine, but.... my cingular 3125 it continues in English !!!! can anybody help me please ?
Please help me!!!
I bought a brand new HTC Touch2 in December 2009 from a local shop in Greece. Originally, it had the Greek ROM preinstalled (the menus, commands e.t.c. were Greek and it had a special Greek/English Keyboard with a special Language Switching button above the Shift button).
However there were some problems. The Greek translation was awful and the phone often crashed. So, I decided to flash the English ROM. I flashed the HSPL - which I found in this forum - and then installed the original WWE ROM from HTC Pedia. Unfortunately, this ROM doesn't include a Greek Keyboard...
I tried everything (Fixes, Registry Hacks, EzInput Packages, Advanced Configuration Tool 3.3 and also tried to understand and edit the Registry keys: ezinput, ezsip, tegic). I realized that all the files needed for the Greek Keyboard existed in the Windows folder of the WWE ROM. So, what I need is the correct Configuration.
I am desperate... I don't know what to do. Can you help me please? Can you create a cab with the correct Configuration (either extracted from the Registry of a Greek ROM or cooked, maybe). Or, if that can't be done, can you upload a Greek ROM? I only need the Greek/English Keyboard (EzInput Configuration)...
Please, it is very important!
Thanks in Advance...
try ths keyboard is better:
http://forum.xda-developers.com/attachment.php?attachmentid=297994&d=1269370262:o
would this work for wm6.5 (htc touch pro2) ?
TIA
@ngelos said:
I realized that all the files needed for the Greek Keyboard existed in the Windows folder of the WWE ROM. So, what I need is the correct Configuration.
Click to expand...
Click to collapse
I had a very similar issue as you, using a WWE ASIA ROMand wanting a special Chinese input. Same situation: All files seem to be there, but no idea how to get the keyboard. What I did was install the Chinese ROM (would be the Greek one for you), hard reset, select the wanted keyboard, and dump the registry to a text file.
Next I installed the "target" ROM (WWE ASIA for me, WWE from HTCPedia for you), hard reset, and dump the registry again.
Then compare both registry text files. I searched for everything that looked like ezInput related, and finally figured out that for me I needed to change the following:
Code:
1) Delete these 3 keys:
[HKEY_CLASSES_ROOT\CLSID\{F50603D1-CF2F-41D8-A74B-651226633FF0}
[HKEY_CLASSES_ROOT\CLSID\{5AAFAF99-8D99-4466-A66D-95C44B608A84}
[HKEY_CLASSES_ROOT\CLSID\{9E06C6B8-FE4D-4206-9A5B-6E4C1B8B6AD7}
2) in [HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ezsip] change the following values:
"CurrentSIP"=dword:00000da4
"HWChineseMode"=dword:00000001
3) in [HKEY_CURRENT_USER\Software\Keytouch\Multiplay] change the following values:
"nSelectedIme"=dword:00000003
"DefaultIME"="ZY"
Maybe you can do something similar. Good luck!
PS: Here are my adventures described:
http://forum.xda-developers.com/showthread.php?t=659970
Thank you very much for this keyboard!
It was just what i needed!
EZInput Greek from Touch3g forum
http://forum.xda-developers.com/attachment.php?attachmentid=305403&d=1270649275