I download the rom image from pda-hack.net in this url:
http://pda-hack.net/forum/index.php?showtopic=50
as well as the extrom, then fully charge my battery and follow these instructions:
1 diskimg.rar (40,6 Mb) - main OS, decompress this archive in SD Card root directory
2. pda-hack.net_rw68xx_ExtROM_emul.cab (3,97 Mb) - some applications needs ExtROM, this package can emulate it. Install after flash or put it into '\Cabs' directory before flashing for autoinstall
3. To flash press & hold soft-keys, then push reset, after HP logo is appear, release soft-keys and don't touch anything. After flashing device automatic reboot in hard reset.
I don't put the content of cabs.rar into my \Cabs, because I don't want to install these.
I use my 2G sandisk card to flash my 6828. When I boot into bootloader, the hp screen appears with blu1.0.5 at bottom-left cornel for about 20 minutes and then it blacks. I tried to get into bootloader mode but fails, also I tried to hardreset it ,but no response.
Is there a way to resurrect it .THANKS THANKS THANKS!!
Have you removed battery out around 5 to ten mins. and put it back at the same time with quickly go to boothloader like someone siad before?
I think it may help. Coz, I have 2 machines of 6828 me and my friend. One is fine flashing rom to WM 6 but another one meet the problem close to you. After waiting for 45 mins. I decide to remove batt around 5 mins. and bootloader again like what I read from some threat here and it works. I finally finish flash rom to WM6 both.
Good luck.
i managed to resurrect it. Take out battery, wait, press both soft key, at the same time put battery in, wait a second, wait a moment, it will be in bootloader mode.
uh.. anyone can help me?? i have the same problem.. xD
HI!
helloworld1 said:
i managed to resurrect it. Take out battery, wait, press both soft key, at the same time put battery in, wait a second, wait a moment, it will be in bootloader mode.
Click to expand...
Click to collapse
http://www.pdaviet.net/showthread.php?t=12439
ALL YOU NEED
I had the same problem. now no response at all. I am now taking the battery out and hope it works....
But still can't boot, i already tried to press the both - softkey, remove the batt, re plug the batt, and softreset , still no response, then i release the both - button...
what should i know now ? any idea ?
Related
After I tried to downgrade my Qtec2020 from WM2005 tot WM2003SE the updated stoped in stage 1.
This is what I found in the RUULog.log file:
19:15:11 Connection with Serial
19:16:31 Begin stage 1
19:17:01 CE Erase retry 1
19:17:31 CE Erase retry 2
19:18:01 CE Erase retry 3
Now I am stucked in bootloader mode and tried softreset, hardreset, special WM2005 hardreset but nothing seems to work. I have only a grey screen with Serial v1.02 on it.
Is there anybody who could help me
I've never performed any downgrades from WM5.0 but I have an idea that could work?
Install WM5.0 again, then perform a Hardreset but this time perform the Registry and Storage format (press power+record+camera+reset pin for about 5 seconds and you should see a menu on the screen, by using the record button to select an option and camera button to change to YES. It should be NO, YES, YES and press ACTION button to save changes). Then unhide the Extended ROM and erase anything in there.
Then perform the downgrade to WM2003SE.
I hope this works for you...
Regards,
Rayan
Thanks for the information but it's not the solution.
I tried to install WM5 again but I get an error 112 during the install.
The RUULog.log file:
20:42:03 Connection with Serial
20:43:26 Begin stage 1
20:43:56 CE Erase retry 1
20:44:26 CE Erase retry 2
20:44:56 CE Erase retry 3
The device is still stuck in bootloader mode. All the reset actions won't work (soft, hard, special)
Have you tried the upgrade/downgrade method using an SD card instead of the cradle/pc?
No I only tried it by USB/PC. I will search the forum for how to do this and give it a try. I will let you know later if this is the solution. Thanks for the information so far.
Regards Marco
I search the forum but can't find any way to do this. Can someone tell me how to flash by SD card
It's in the Wiki, not the forums...
Here you go:
http://wiki.xda-developers.com/index.php?pagename=XDAtools
Good Luck!
Hi, I was just upgading my XDA 2 os when my laptop froze in the middle of the upgrade! Now it only has the o2 startup screeen it won' turn off or connect to my computer to complete the upgrade. What can I do?
Is my Xda gone for good??
skud try aggain
you can put it back in bootloader mode and try aggain
this time on a destop you know power problem in laptop
you will not want a power failure in the middle of an upgrade
hope thats helped
Stuck on Bootloader
I experienced the same thing too.
Just detached battery from your device for about 10 minutes (I pressumed, may need more time)... then do the downgrade again.
in your PC task manager ''end process'' the ff:
''wcescomm.exe''
''WCESMgr.exe''
''rapimgr.exe''
now connect again the device and start the reflash...it works for me.
hope this wl help you...
No joy I'm afraid. How can I get it back in bootloader mode when I can't get past the O2 startup screen. Putting in an sd card Doesn't do anything either it is completely dead except for the annoiying but colorful O2 Logo.
Ok, it just turned itself off so I am after turning it back on andnow all I have is a white screen! What is going on? The laptop crashed when it was at 65% in the upgrade proces.
I'll give this taskmanager thing a go and get back to ya.
Thanks for all the help btw!
I have placed a ROM.nb1 on my SD card, but I get a eror with the XDA OS Image Tool. It looks that I can't find any way to get out of the bootloader mode whatever reset I tried. The battery was out for almost 12 hours but this also makes no difference. Is there a other way to flash by SD card or is there a way to reset/upgrade the bootloader mode. I think the bootloader mode hangs or is corrupt.
Regards Marco
I've tried that now and it still won't connect and still the same white screen! Any othere suggestions? Is there anything I can download which would force a connection or install something onto my XDA or does anyone know how I can get past this blank screen and maybe get to the settings window?
This must have happened other people anyone managed to fix this?
:!: :!:
hey power kite! It seems we got similar problems but your a bit ahead in getting it fixed. Can you tell me where you got the Rom.nb1 file so I can give this XDA tool thing a go?
What kinda power kite you got BTW?
Here is the link where I get the NB1 file
http://forum.xda-developers.com/viewtopic.php?t=8606&highlight=sd+rom
Good luck
Cheers Power kite,
I was just doing a bit of seaching on the sd flash method and found a website that takes you throught it step by step if your interested
http://en.pdamobiz.com/en/forum/PDAforum_posts.asp?TID=93&PN=1
Hurray I'm back in business!!! Talk about relief! :lol: Its upgrading as we speak!
Now just to watch it like a hawk and not let this crappy laptop crash again!
Thanks everyone!
Give that link a look Power kite.
Skud
99% !!!!!!!
Great that it worked for you.
I did procedure 1, 2 and 3 but I'm still stuck in bootloader mode. Every upgrade WM2005, WM2003SE wich I have flashed before give me an error 112. I have flashed my SD card but I don't get any instructions on my screen.
Is it possible to install the bootloader again or upgrade it. I think my problem is the bootloader.
I installed somet languanges support pack into it from PC, everything went fine, the PC screen said, install sucessful,, and the machine prompted to reset, and then,,,its dead!!!
The Lobster only now shows the virgin mobile logo,,cant even switch off...
What should do............???
Thanks a million!!!!!!!!!
Lobster is dead? it should be cooked!
Is the Lobster/monet ROM floating around somewhere ?
dead lobby
You've probably either sorted this by now or binned the phone but I thought I'd post anyway as it may help others.
You don't describe what you mean by dead but have you tried hard reset?
WITH PHONE SWITCHED OFF (in your case remove and replace the battery)
1. Press and hold soft1 and soft2 keys (i.e. menu keys).
2. Press and hold power button for around 1 to 1.5 seconds. Release power button. Keep holding both soft keys.
3. After a while, black screen should show instructions asking user to press '0' key to reset to factory default.
4. Press '0' within the timeout period (which is very brief).
5. If instructions don't appear on the screen, repeat steps 1 to 4.
You have to flash it using it's original rom (for locked device).
but if you phone is CID UNLOCKED you can flash it using ROMIUPDATE. just put the phone in bootloader mode and run the RUU Update.
sk8erfrankrox said:
I installed somet languanges support pack into it from PC, everything went fine, the PC screen said, install sucessful,, and the machine prompted to reset, and then,,,its dead!!!
The Lobster only now shows the virgin mobile logo,,cant even switch off...
What should do............???
Thanks a million!!!!!!!!!
Click to expand...
Click to collapse
ok take batty out put it back in press to menu bottons keep hold and press power botton when a sreen tells you to press 0 do so it will hard reset you lobster
dvaiyo said:
You have to flash it using it's original rom (for locked device).
but if you phone is CID UNLOCKED you can flash it using ROMIUPDATE. just put the phone in bootloader mode and run the RUU Update.
Click to expand...
Click to collapse
hi~dvaiyo,
I have find the RUU update for lobster700 long time.
can you show url to download it ?
thanks ~
There is no place to downloat it. You must import it from other device... mtty can do it..
ive got a back up what i got form Scoter Kitchen if you what it let me no these three files BDTL0_SCOTERMSFLSH50.bin BDK0_SCOTERUT.bin BDK1_SCOTERMSIPL.bin
dvaiyo said:
There is no place to downloat it. You must import it from other device... mtty can do it..
Click to expand...
Click to collapse
I think thats you right, then the question is when I want to write into with MTTY, with which soft do I draw ROM? Please share successful experience, thanks ~
MttY?its so easy?ehe
Hello folks. The friend of mine has screwed up his Lobster, and now he wants to take a dump from another one. The problem is, mtty says r2sd command is unknown... he tried to issue password command, but we don't know the peoper password.
Does anyone have the proper password for bootloader? Or better... does anyone have a rom dump? It'd be appreciated...
utak3r said:
Hello folks. The friend of mine has screwed up his Lobster, and now he wants to take a dump from another one. The problem is, mtty says r2sd command is unknown... he tried to issue password command, but we don't know the peoper password.
Does anyone have the proper password for bootloader? Or better... does anyone have a rom dump? It'd be appreciated...
Click to expand...
Click to collapse
you have to pay £20 to cid unlock his lobby go here http://www.imei-check.co.uk/lobsterunlock.php
tankoki said:
I think thats you right, then the question is when I want to write into with MTTY, with which soft do I draw ROM? Please share successful experience, thanks ~
Click to expand...
Click to collapse
Try this :
http://forum.xda-developers.com/showthread.php?p=2100727#post2100727
travis said:
You've probably either sorted this by now or binned the phone but I thought I'd post anyway as it may help others.
You don't describe what you mean by dead but have you tried hard reset?
WITH PHONE SWITCHED OFF (in your case remove and replace the battery)
1. Press and hold soft1 and soft2 keys (i.e. menu keys).
2. Press and hold power button for around 1 to 1.5 seconds. Release power button. Keep holding both soft keys.
3. After a while, black screen should show instructions asking user to press '0' key to reset to factory default.
4. Press '0' within the timeout period (which is very brief).
5. If instructions don't appear on the screen, repeat steps 1 to 4.
Click to expand...
Click to collapse
I just somewhat bricked my Lobster today after installing fonts and ce-star into my device. I was so scared I nearly crapped my pants.
I stumbled upon your detailed instructions and it saved my thing, thank you so much =]
utak3r said:
Hello folks. The friend of mine has screwed up his Lobster, and now he wants to take a dump from another one. The problem is, mtty says r2sd command is unknown... he tried to issue password command, but we don't know the peoper password.
Does anyone have the proper password for bootloader? Or better... does anyone have a rom dump? It'd be appreciated...
Click to expand...
Click to collapse
I've found this link...
ftp://koxoguest:[email protected]/sp/rom/Lobster_700_tv_os.rar
Its supposed to be the ROM for the lobster. I however cant get it to work as my lobster is stuck on a white screen during boot and cannot get into Activesync. Can anyone advise How i can get into Bootloader mode? I have tried holding Camera key but to no avail...
try taking out the battery, then heating the back of the phone for a while
I did that on my brother's phone(his Lobster "died" the same way) on a sunny day leaving it to heat up for about 30 minutes of sunshine
after that put the battery in and try booting again
OMG......
you can say it clearly
are you update the rom?
if so ,may be the word storage is broken
travis said:
You've probably either sorted this by now or binned the phone but I thought I'd post anyway as it may help others.
You don't describe what you mean by dead but have you tried hard reset?
WITH PHONE SWITCHED OFF (in your case remove and replace the battery)
1. Press and hold soft1 and soft2 keys (i.e. menu keys).
2. Press and hold power button for around 1 to 1.5 seconds. Release power button. Keep holding both soft keys.
3. After a while, black screen should show instructions asking user to press '0' key to reset to factory default.
4. Press '0' within the timeout period (which is very brief).
5. If instructions don't appear on the screen, repeat steps 1 to 4.
Click to expand...
Click to collapse
For me it's not working.....
Any Idas?
yesterday I tried to update the ROM to a new one - WM6 .
I copy into my mini SD the file diskimage_ver.nb0 and I renamed it into diskimg.nb0, after the update my device turned off and I couldn't turn it on.
I pressed the camera button and soft reset so that the bootloader will boot and the PDA turned on! and bootloader appear - but I forgot to copy into the sd card the original ROM so I restart again and I copy to the mini sd card the original ROM files and I pressed the camera button and soft reset to get the bootloader again but the PDA not responding...
(When I connect the PDA to electricity the red light works and when I remove the battery and insert it again the call button and hang up buttons work (green and red light) for 1 second).
Please help me I dont know what to do
Take a look at: http://forum.xda-developers.com/showthread.php?t=314613
Thanks mightyox I did what jiggs wrote but it's not working
Be paient:
1) take out battery & SIM for a while...5 min is enough.
2) remove SD card( a must )
3) put battery back
4) press the camera button with the "POWER" button.
5) check if boot loader boots.
6) if yes, re-flash your phone with running the update Flash program in Windows environment connected with a USB cable.
Thanks dcoloane but it's not working
submission384 said:
Thanks dcoloane but it's not working
Click to expand...
Click to collapse
I had the same problem yesterday and fixed it.
To get back to the bootloader, do this exactly in chronological order:
1. remove SD Card
2. remove battery
3. hold camera button and reset (stylus) button (without the battery attached)
4. replace battery back while still holding the buttons
This will bring you back to bootloader mode.
When you get into the bootloader,
1. Plug the device to your desktop via usb.
2. Make sure that the Notification area in your desktop at least detects a device. if not, try and try until it does.
3. Download Xda-AtomExec-ENG-20060614_R060428N_EX0028.exe (ancient basic rom for my exec) but in your case, because you have an Atom only, get the one for Atom(not exec) i think this is it http://rapidshare.com/files/40346284/Xda-Atom-ENG-20060426-MOT0822.exe .
4. flash it the usual way.
5. Usualy gets stuck at 6% at the extended ROM upgrade, dont mind it, hard reset it,
6. Enter the bootloader again.
7. Flash your original ROM.
dzaprojects said:
I had the same problem yesterday and fixed it.
To get back to the bootloader, do this exactly in chronological order:
1. remove SD Card
2. remove battery
3. hold camera button and reset (stylus) button (without the battery attached)
4. replace battery back while still holding the buttons
This will bring you back to bootloader mode.
When you get into the bootloader,
1. Plug the device to your desktop via usb.
2. Make sure that the Notification area in your desktop at least detects a device. if not, try and try until it does.
3. Download Xda-AtomExec-ENG-20060614_R060428N_EX0028.exe (ancient basic rom for my exec) but in your case, because you have an Atom only, get the one for Atom(not exec) i think this is it http://rapidshare.com/files/40346284/Xda-Atom-ENG-20060426-MOT0822.exe .
4. flash it the usual way.
5. Usualy gets stuck at 6% at the extended ROM upgrade, dont mind it, hard reset it,
6. Enter the bootloader again.
7. Flash your original ROM.
Click to expand...
Click to collapse
Good experience....hehehe...
not working
at the repair center they told me to remove the backup battery on the board (if it has one) and put it back... or just to give them with a nice price of 150$they repair it...
submission384 said:
not working
at the repair center they told me to remove the backup battery on the board (if it has one) and put it back... or just to give them with a nice price of 150$they repair it...
Click to expand...
Click to collapse
Hehehe. It's time to buy an iPhone or Atom Life. hehehe. keep on searching the forum. i'm 99% sure that you'll figure it out somehow. That's how TofClock did it so well. Just search the entire forum.
I'm having the same exact problem. The bootloader is just not coming back up after the camera and reset [it did before but I was trying to downgrade the hack atom exec on my atom pure so the wm6 install utility would work]. I figure I would let my atom sit without the battery for a while with battery out to see if I can get the backup battery to drain down before I try it again. Anyone else have this problem that has a solution??
submission384 said:
yesterday I tried to update the ROM to a new one - WM6 .
I copy into my mini SD the file diskimage_ver.nb0 and I renamed it into diskimg.nb0, after the update my device turned off and I couldn't turn it on.
I pressed the camera button and soft reset so that the bootloader will boot and the PDA turned on! and bootloader appear - but I forgot to copy into the sd card the original ROM so I restart again and I copy to the mini sd card the original ROM files and I pressed the camera button and soft reset to get the bootloader again but the PDA not responding...
(When I connect the PDA to electricity the red light works and when I remove the battery and insert it again the call button and hang up buttons work (green and red light) for 1 second).
Please help me I dont know what to do
Click to expand...
Click to collapse
You are not suppose to rename diskimage_ver.nb0 into diskimg.nb0 without altering the file. That's why they have different names to start with.
The files that came with normal DSUU OS mode flashing have header identifier while the files for SD Card flash do not. It is assumed that you know what you are doing during SD Card flashing, that's why there is no manual or instructions to do it. bootloader mode was meant for device service personnel use only. We use it to hack the ROM.
DO THE FOLLOWING:
1. remove the battery for one minute
2. insert the battery while observing the LED
3. if LED blinks once, your bootloader is okay
4. do as dcoloane says to the detail
IF LED doesn't blink, sorry mate, you toast your device. It's now a paper weight.
Its really strange. When I insert the battery, the orange LED will blink once really quick and charging seems to work also. But when I try to get it into bootloader mode, it just doesnt do anything. This atom pure is my back up phone [have a atom life also] so I guess I will let the battery completely drain out of it before I will try again~_~. As for the renaming, I did the same thing as the atom just couldnt recognize the file and update the rom if you didnt rename it [yeah, yeah.. I"m a noob - the problem isnt upgrading the rom which I have done many time, its the downgrading of the hack atom exec rom on my original atom that screw me up as I couldnt upgrade the wm6 due to the install file wont work as it think its a atom exec instead of the atom pure~_~]
Maybe you have to remove battery for a night to make sure it is dried out.
yeah, just going to wait for my backup battery to run out of juice before I try again. Either that or send it in for the $150 repair~_~.
dwhsieh said:
Its really strange. When I insert the battery, the orange LED will blink once really quick and charging seems to work also. But when I try to get it into bootloader mode, it just doesnt do anything. This atom pure is my back up phone [have a atom life also] so I guess I will let the battery completely drain out of it before I will try again~_~. As for the renaming, I did the same thing as the atom just couldnt recognize the file and update the rom if you didnt rename it [yeah, yeah.. I"m a noob - the problem isnt upgrading the rom which I have done many time, its the downgrading of the hack atom exec rom on my original atom that screw me up as I couldnt upgrade the wm6 due to the install file wont work as it think its a atom exec instead of the atom pure~_~]
Click to expand...
Click to collapse
same thing...
orange LED blinks once really quick and charging seems to work also...
and I let the battery completely drain out (left it about 4 days without battery) and... nothing !!!
I sent my device to repair shop they are trying to repair it... wish me luck
submission384 said:
same thing...
orange LED blinks once really quick and charging seems to work also...
and I let the battery completely drain out (left it about 4 days without battery) and... nothing !!!
I sent my device to repair shop they are trying to repair it... wish me luck
Click to expand...
Click to collapse
have u try this procedure on #1
http://forum.xda-developers.com/showthread.php?t=314613
dwhsieh said:
Its really strange. When I insert the battery, the orange LED will blink once really quick and charging seems to work also. But when I try to get it into bootloader mode, it just doesnt do anything. This atom pure is my back up phone [have a atom life also] so I guess I will let the battery completely drain out of it before I will try again~_~. As for the renaming, I did the same thing as the atom just couldnt recognize the file and update the rom if you didnt rename it [yeah, yeah.. I"m a noob - the problem isnt upgrading the rom which I have done many time, its the downgrading of the hack atom exec rom on my original atom that screw me up as I couldnt upgrade the wm6 due to the install file wont work as it think its a atom exec instead of the atom pure~_~]
Click to expand...
Click to collapse
It's not how long you take out the battery or the amount of battery power. It's how quick you press the bootloader mode buttons after replacing the battery. It has to be immediate; otherwise, it won't work. You also have to hold the button simultaneously for a second.
did that already. It work previously so I know I can get into bootloader. It only stop working after the flashing. Where exactly do you send it in for repair anyway?? Anyone has a tele or address as when I bought it it didnt come with a box or manual.
I found local PDA repair shop...
calling for help here,playing too much to flash this handset, and in my last progress to flash it...after 100% finish...nothing comes up,not even BL mode...
just black out..i guess my hp dead...right?
any solution?or i have to take to HP service centre?
however connect to the usb,the led light green/red still on...
any body help??
no1?
Try this way :
- Take out miniSD card.
- Press both softkey and remove battery then put it back again (Don't unpress two softkeys) then softreset...
- Wait 2-3 secords
If it appear HP Bootloader Screen, your device not dead. You can flash it again.
HP 6828 Dead Lock due to Flashed with Atom Rom
nhocbanme said:
Try this way :
- Take out miniSD card.
- Press both softkey and remove battery then put it back again (Don't unpress two softkeys) then softreset...
- Wait 2-3 secords
If it appear HP Bootloader Screen, your device not dead. You can flash it again.
Click to expand...
Click to collapse
nhocbanme need your very kind help,
my buddy mistakenly flashed my HP 6828 using different Rom, probably using Atom Rom and as result my HP 6828 seems heading the the end of the world.
Please advice me what should i do to recover back my pity 6828 life ?
thanking You in advanced
Eddie
nhocbanme said:
Try this way :
- Take out miniSD card.
- Press both softkey and remove battery then put it back again (Don't unpress two softkeys) then softreset...
- Wait 2-3 secords
If it appear HP Bootloader Screen, your device not dead. You can flash it again.
Click to expand...
Click to collapse
thank's.....nhocbanme
alimx said:
thank's.....nhocbanme
Click to expand...
Click to collapse
mm guys dats nt a problem u can retrieve it am aso using ATOMS bbot loader her hp rw6828
nt u need to flash 1ly d ROM>....to a Supported aii recommend u to use helloworlds ROM...
nhocbanme said:
Try this way :
- Take out miniSD card.
- Press both softkey and remove battery then put it back again (Don't unpress two softkeys) then softreset...
- Wait 2-3 secords
If it appear HP Bootloader Screen, your device not dead. You can flash it again.
Click to expand...
Click to collapse
thanks, my 6828 show the HP Bootloader screen now. but how to continue ?
no respone when I press the any key . or insert the miniSD card the do again the step ?
Oh ! yes ! insert the miniSD and do the step again.
my 6828 upgrade to WM6.1 now !!
Thank you very much, I was going crazy and I thought I had a brick but in the end without problems and is updated and I ok
forgive me for the English from google
jeswang said:
thanks, my 6828 show the HP Bootloader screen now. but how to continue ?
no respone when I press the any key . or insert the miniSD card the do again the step ?
Click to expand...
Click to collapse
All settled.Thank you guys.
6828 dead
con't boot when iput the battery red&green button lights on... help me!
In my case. I do any way it can'y start my device. My HP service center tell me it must be change mainboard. But I don't change. But I try to open it again. I found this way.
I think you will try this way as me.
- remove battery in a few minite.
- put battery back again.
- plug a battery charge. (not a cable sync)
- If green and red is on. I think it ok. If it not on, you will try first choice.
- Press both softkey ,power switch, soft reset to start bootloader at the same time. Don't press power switch at first.
I think it can be open your device on to bootloader. Flash it again.
Chanutpong said:
In my case. I do any way it can'y start my device. My HP service center tell me it must be change mainboard. But I don't change. But I try to open it again. I found this way.
I think you will try this way as me.
- remove battery in a few minite.
- put battery back again.
- plug a battery charge. (not a cable sync)
- If green and red is on. I think it ok. If it not on, you will try first choice.
- Press both softkey ,power switch, soft reset to start bootloader at the same time. Don't press power switch at first.
I think it can be open your device on to bootloader. Flash it again.
Click to expand...
Click to collapse
This solution worked for me today! my rw6815 was just like yours!
nhocbanme said:
Try this way :
- Take out miniSD card.
- Press both softkey and remove battery then put it back again (Don't unpress two softkeys) then softreset...
- Wait 2-3 secords
If it appear HP Bootloader Screen, your device not dead. You can flash it again.
Click to expand...
Click to collapse
You're Master!!!
help
my device is HP Ipaq rw6828.... i have this problems twice, but ican solve it, now i had a same problem.... now i can't resolve it....
now my device still (dead) only LED indicator when i charge it...... i use anything method, but it's not work.... except JTAG, cz i can't use this method.... please, any other way except JTAG mode????????? many big thanks.................. if u have an opinion, email me, [email protected]
help
Exclamation help
my device is HP Ipaq rw6828.... i have this problems twice, but ican solve it, now i had a same problem.... now i can't resolve it....
now my device still (dead) only LED indicator when i charge it...... i use anything method, but it's not work.... except JTAG, cz i can't use this method.... please, any other way except JTAG mode????????? many big thanks.................. if u have an opinion, email me, [email protected]
Hi guys
I'm new to this stuff, and I've been searching round on the forums for the last half hour but haven't managed to find a clear cut explanation of whether my atom is dead or not..
I just tried to install the Windows Mobile 6.5 ROM (Atom_B1.7z) I think it was the helloworld1 rom? Anyway, I was trying to install the ROM through the DSSU method and it got through to about 6% on the first step then my atom shut off
It won't respond to any button pushes now, however it will still display the charging light. I can't even get into the bootloader to reflash, however, I would have thought that the first step was only to install the OS, so I don't understand how it effects the bootloader? Unless I'm wrong?
Can anyone give me a clear cut idea as to whether my atom is dead or not?
Cheers.
mabix said:
Hi guys
I'm new to this stuff, and I've been searching round on the forums for the last half hour but haven't managed to find a clear cut explanation of whether my atom is dead or not..
I just tried to install the Windows Mobile 6.5 ROM (Atom_B1.7z) I think it was the helloworld1 rom? Anyway, I was trying to install the ROM through the DSSU method and it got through to about 6% on the first step then my atom shut off
It won't respond to any button pushes now, however it will still display the charging light. I can't even get into the bootloader to reflash, however, I would have thought that the first step was only to install the OS, so I don't understand how it effects the bootloader? Unless I'm wrong?
Can anyone give me a clear cut idea as to whether my atom is dead or not?
Cheers.
Click to expand...
Click to collapse
ur device is bricked, if and only if, ur device won't start normally... even if u press soft-reset, hard-reset, or even bootloader mode buttons. Before panicking, do da following:
Brick Test:
1. Make sure ur device has ample battery charge. If u're not sure plug it in with da wall charger for at least 10min
2. Remove ur battery for at least 1 minute
3. Replace ur battery while observing da LED lights
4. If da LED blinks once upon battery insertion, u might have hope yet
Da only way to upgrade on a semi-brick device, is to upgrade through bootloader mode. No bootloader mode, No upgrade possible - period.
Entering Bootloader Mode on Semi-Brick Atom:
1. Remove battery for for at least 1 minute
2. Press CAMERA+RESET(stylus) simultaneously
3. Insert battery while still holding da buttons
4. Release da buttons at da same time(u should see bootloader screen)
Note: Failure to hold the buttons at da same time during battery insertion will cause it not to work.
GOOD LUCK
Thanks, ma Atom now working ) yeahh