MDA-II upgrade problems (Noob) - MDA II, XDA II, 2060 ROM Development

Rom: 1.60.00 Ger
Datum (Date): 12/03/03
Radio: 1.06.01
Protokol: 1337.16
ExtRom: 1.60.08
---
At StartupScreen:
R 1.06.01
G 1337.16
D 1.60.00Ger
I have this T-Mobile Edition and try to upgrade this MDA with:
C_ShekharAKU3.5c.R40.P24_public
C_ShekharAKU7.0c.R40.P24_public
(Downloaded as recommandet here)
After doubleclick
Code:
HimaUpgradeUt.exe
the program start, but after a while it says, there is a error/problem, i should retry.
When I start to try something with the "bootloader" (on-switch, Action-button, reset) he explain me, i can´t install this version, cause the langua.
So pls. help a noob (first-timer of rom-modification), maybe u have a help-page in german too (Or step by step), cause all what i found at your wiki confuse me too much, cause i never heard somethin about this all - even how the extract a .nbf-file.
Thx for help

---

llbasha's guide
==================================================
6 steps to successfull Himalaya/WM2k5 upgrade.
==================================================
Note:
The Radio_.nbf is an optional component,
not included in this archive.
Get your favourite Radio ROM at http://buzzdev.net
====================================================================
1. Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
2. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
3. Run HimaUpgradeUt_noid.exe
4. Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
5. Detach your device from the cradle.
6. Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.

---

wow - ma, thx; perfectly :d:
It worked, no i have a version of 7.04.c, i guess win 6.0
---
Just few problems left:
1.) fixed
2.) Is there a german version anywhere???
3.) edit: my mistake; fixed
4.) I read, there is no problem of downgrade it (no, i don´t want), but from where i should get the german version for downgrading)
5.) My mda was without simlock (I could use every phonecard), i hope i still can ))
Edit2
6.) I have the program PowerLOC Destinator (a Navigation Program); when i would start, he tell´s me: Invalid PocketWizard Setup package
I guess Navigator is not made for win 6, cause the programm is the original sd-card
7.) At settings i can "switch" wlan; I guess this is just from the OS, cause as i know, a standart mda2 doesn´t have wlan
Background: A guy from phonecompany told me, that t-mobile, switched off the wlan-function, so that i customers doesn´tt know, that his pda can wlan (Branding of t-mobile); but the hardware is inside the pda; They made it at vario 2 and mda pro
Edit3:
Next Problem:
When i connect now the craddle with the mda, i get following error msg.
-Generic RNDIS (PROTOTYPE--Remember to change idVendor-
And ActivSync is not connecting
I duno, how to fix
ActiveSync 4.5 doesn´t work on my w2k-pc, and my mda sais he needs 4.5
With 4.2 and down, i can´tt connect the mda
Anyway, thx, thxy, thx, this was really a good describtion