Related
Hello,
I tried to upgrade my SPV M1000 to WM5. I followed the procedure and ran the device in bootloader mode. I put the device on the cradle and it displayed USB and V1.06. Ok sounded good.
I started then the HimaUpgradeUt.exe program on the PC. The problem is HimaUpgradeUt.exe didn't find the mobile device at all. After maybe 1 minute looking to it displayed an error 101 message.
I tried different things : install ActiveSync 3.8, 4.2, 4.5 (no change)
I tried to connect the device with mty and it worked !
I tried to run HimaUpgradeUt.exe with the SPV running WM2003 and it found the device. I didn't try to upgrade in this mode anyway.
Any help is very welcome.
is your machine with win vista also?
as you said that you tryed to install ActiveSync 3.8, 4.2, 4.5, guess its WinXP. if its 2000/WinXP/win2003 then use only 4.2 version of ActiveSync. don't know why but i can only have sucess with that version. check for any security software that may block COM. with ActiveSync-Pocketpc.
that HimaUpgradeUt.exe you use is for your model? as im not an expert on this matter, don't know if your precise phone is a himalaya, maybe thats the prob. ehehhe then maybe not as im not aware of all the brands this peace of tech can became!
do right click on my computer and select manage, goto device manager and see for a mobile entry there, while your pocket is connected in serial/usb boot mode. there must be a windows ce device there for this to happen, and you should, not a must, but try to shut activesynch down while doing this detection with HimaUpgradeUt
Yes I'm running Windows XP Pro SP2. I installed activesync 4.2 again and disabled the firewall. I can see windows detecting the device when I put it on the cradle. But there is still the 101 error message when I try to run the update.
Vista and upgrade
Firstly thanks to marcjero for guiding me to this thread...
secondly... I had no probs at all, syncing my device with vista's WMDC(Windows mobile device center), apparently I tried to flash my device... and yes its an i-mate XDA II, currently running on C_ShekharAKU3.5.R40.P24_public_ROM and want to update to the latest one... apparently, connected my device to my system in bootloader mode... and well since then my system has a prob detecting my device... and I cannot even sync now... when i try to run HimaUpgrade, get the same 101 error code... :-(
any ideas how to get this thing working again?
PS: its seriously frustrating for me
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
syncing not working either...
xda2jojo said:
you cannot flash the device except in winxp...
jojo
Click to expand...
Click to collapse
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
xda2jojo said:
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
Click to expand...
Click to collapse
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
daWidoW said:
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
Click to expand...
Click to collapse
marcjero said:
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
Click to expand...
Click to collapse
what OS you are using while flashing and synching? xp? vista?
I'm running XP SP2
About Vista...
Read this thread
Could worth to try.
I tried to flash using my work laptop and it's working now
44% processed, finger are crossed...
hi
guys i am newbie in upgrading and tried to run athena wraper and it died and after searching forums i still cant find cure ok so here it is i can do hard reset but it dosent help no boot up it still gives me ring round joystick good news is i can get it to bootloader screen (or at least thats what i think ) its red green blue and white screen with usb or serial (depending on cable )
screen reads
ATHE100
IPL-V0.90
ATHE100
SLP-V1.20.Olipro
now can any one help me ??
how can i upgrade rom with out device being detected by active sync every time i run upgrade utility it just comes up with connection error
still no luck
hi
still no luck
do i need special drivres to detect device if its in bootloader ?
it dosent show any thing in device manager when i connect it while its in boot loader
on running upgrade utility it comes back with error 260 connection error saying cannot find device (i am stuck in bootloader)
any advices ??
please help !!!!
The fact that you can still enter the bootloader means that it is not bricked, so first advice would be, as is so well presented in the Hitchhicker's Guide to the Galaxy, "Don't Panic".
Enter bootloader without any SD Card or SIM left in the Athena.
Then, plug it to the USB port, and see if it goes from "serial" to "usb".
Then try to flash first the Black Dual PK ROM available on the forum (in the WM6 section), or an official ROM available from the Wiki, for instance.
hi
tried to flash it with both and came out with same error
260 connection cant find device
and i cant even see any changes in devicemanager but it dose goes serial to usb when i connect
and my pc is not detecting the device (just like that depressed robot from hich hikers guide to galaxy )
Do you have Windows XP or Vista ?
Ecraseur said:
Do you have Windows XP or Vista ?
Click to expand...
Click to collapse
xp (pc i am trying to upgrade i also have vista on other pc which i havent tried yet should i try that ?)
nop no luck in vista ether same error still no connection
both pc have netframework 2
activesync in xp and mobiledevice center in vista
but after connecting device nothing happens in device manager there is no new device
(could it be beacouse of faulty cable? )\\(noi have tryed 2 different cable )
is it worth getting cradle ??
No no. I think the problem comes from the flash utility that requires that the Athena be detected prior to flashing.
I know that with the Universal, some flashing utilities could force flashing when connecting the device already in bootloader mode...
So there must be an easy way to bypass the device detection and go on with the flash process. I'll try and find out, and maybe one of the gurus will cruise by and find it for ya in the meantime.
In the meantime, don't freak out and be patient. Your Athena's not bricked, probably the ROM that's screwed up. We only need to find a way to do that exclusively from the bootloader (chich I know is possible, that's the whole point of the bootloader ).
vijay5264 said:
nop no luck in vista ether same error still no connection
both pc have netframework 2
activesync in xp and mobiledevice center in vista
but after connecting device nothing happens in device manager there is no new device
(could it be beacouse of faulty cable? )\\(noi have tryed 2 different cable )
is it worth getting cradle ??
Click to expand...
Click to collapse
Hi
Try a hard reset ( Volume down+reset) and then get into the boot loader(Camera+reset~10seconds) then flash the PK dual rom. Don't panic, Your athena is hard spl patched therefore not bricked. If that not works down load the exact official rom for your device flash that then flash the PK dual rom. try Redownload the rom again.
Good luck
HeartOfDarkness said:
No no. I think the problem comes from the flash utility that requires that the Athena be detected prior to flashing.
I know that with the Universal, some flashing utilities could force flashing when connecting the device already in bootloader mode...
So there must be an easy way to bypass the device detection and go on with the flash process. I'll try and find out, and maybe one of the gurus will cruise by and find it for ya in the meantime.
In the meantime, don't freak out and be patient. Your Athena's not bricked, probably the ROM that's screwed up. We only need to find a way to do that exclusively from the bootloader (chich I know is possible, that's the whole point of the bootloader ).
Click to expand...
Click to collapse
hi
thankes i think u understood the problem it is utility which fails before even starting beacouse of no connection see if u can find any thing
and yes i tryed hard reset and then tryed to flash with project black rom and i have downloaded latest t mobile rom from oficeal website but as i said before it fails with connection error it starts up and box says ''verifying information on your pda fone please wait'' and minut later it comes up with error 260 connection error '' please check following
1 your pdafone is connected to usb cable /cradle
2 usb cable connected to pc
(wich is basicly same if you try to nrun upgrade with out connectind pda )
(and yes i have tryed it with 2 different cables and it dose change from serial to usb)
some ting intrestin i foun in orignal update utility faq
ERROR [260] : CONNECTION
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
is possible because device is in bootloader ?
or am i doing some ting wrong?
Reboot your PC, make sure you are not using a USB hub, try it with each USB port on the PC.
Pantaloonie said:
Reboot your PC, make sure you are not using a USB hub, try it with each USB port on the PC.
Click to expand...
Click to collapse
good idea but dident work after 4 on board ports and 2 hub ports no joy at all
by looks of it upgrade utility is trying to read info from my device and could be failing for 2 reasons
1 it is not detecting device
2 info in pda is corrupted and could not get any info from device
well thats my theory but not really sure any suggestions??
Is your PC running XP or Vista? I got the impression reading the post that XP machine works better in unlocking. I think the info was posted by Olipro himself if my memory is right.
eaglesteve said:
Is your PC running XP or Vista? I got the impression reading the post that XP machine works better in unlocking. I think the info was posted by Olipro himself if my memory is right.
Click to expand...
Click to collapse
it is running xp the one i am working on now (i do have 2nd pc running vista 64 bit )
but i am doing unlocking in xp
all i want to find out is dose device needs any drivers or dose it gets detected if device is in bootloader ?
if thats the the case i dont see any new devices in xp devicemanager
No no, it doesn't. Couldn't find it for Athena, but don't have much time lately, alas.
Maybe you should PM one of the gurus asking how to flash a ROM straight from bootloader without having the device detected by WinXP. I believe there's a small, easy manipulation to make, but can't remember it for the life of me. :-S
HeartOfDarkness said:
No no, it doesn't. Couldn't find it for Athena, but don't have much time lately, alas.
Maybe you should PM one of the gurus asking how to flash a ROM straight from bootloader without having the device detected by WinXP. I believe there's a small, easy manipulation to make, but can't remember it for the life of me. :-S
Click to expand...
Click to collapse
i found this in wiki and first three posts are empty but followed the procedure and downloaded all three roms and still no joy error
''Problems using the Athena Unlocker - the Black Screen of Death
Using The Athena Unlocker tool (developed by Olipro) is a 3-stage process. Most users get through the first stage but as they start stage 2, get a black screen where their device becomes unresponsive and so cannot proceed with the unlocking. See these posts
http://forum.xda-developers.com/show...&postcount=169 or http://forum.xda-developers.com/show...&postcount=176 or http://forum.xda-developers.com/show...&postcount=226
It is always recommended that you first take out your MiniSD card. You can then follow the instructions below.
* Get one of the ROMs in this link and extract it http://forum.xda-developers.com/showthread.php?t=314672
* Get your device into bootloader (the three-colour screen; You can get there by pressing the Camera key + Volume key + Soft Reset at the same time)
* Connect your device to your PC (even if the PC shows no sign of recognising it, it does) and the SERIAL shown on the screen of your device will change to USB)
* Hit the ROM Upgrade Utility and upgrade your device.
* Once the upgrade is completed, configure your device (Calibrate screen, set time zone, etc).
* Now continue with the Unlocker, to the end.
It is important to complete the unlocker to the end or else you will miss out on flashing your radio, with a common symptom of your gps not working.
Good Luck and enjoy your improved device!
''
now i am still stuck will it make any difference if i try it in different xp pc other then the one i started the process ?(and screwed it up)
Please ensure all software firewall or IP filtering apps are turned off then reboot the PC. After rebooting, confirm the apps are not running and blocking anything. If you are unsure, then try it from a freshly installed XP.
Put the device in Bootloader mode and try it again.
lpsi2000 said:
Please ensure all software firewall or IP filtering apps are turned off then reboot the PC. After rebooting, confirm the apps are not running and blocking anything. If you are unsure, then try it from a freshly installed XP.
Put the device in Bootloader mode and try it again.
Click to expand...
Click to collapse
good idea
i have already tryed with firewalls and virus protection off but doing it in fresh xp might just work small question do i need to install active sync or is it not needed (any way ill try both first without and then with )
ill report back in about 3 hours (i know i am sad and havent got a life but its worth a try )
Yes, the wiki confirms what I thought but didn't voice out loud as yet (I was sure about it for the Universal, but not for the Athena): the upgrade utility doesn't *require* that it be Activesynced. That's, as I'd said, te whole point of the bootloader.
If you still have problems uploading the new ROM to your Athena after following the wiki thing, then it *does* mean that there is some external factor playing dirty, so the firewall to check (and some anti-virus software also scan network connections) indeed is a good idea.
Keep us posted, and I'm keeping my fingers crossed.
i posted this in the hard spl sticky thread but got no responses so i thought i would create a new thread.
Been reading through the forums for 3 hrs. i read the entire unlocker thread. cant find any info on this.
i own a htc x7501. i performed a hard reset, connected device to windows xp pc. synced with active sync 4.5. everything connected, i can browse files on the device. device definitely connected.
i took out the sd card, sim card remains. windows xp computer has all updates and service packs and antivirus disabled.
i ran athena unlocker version 3, downloaded today from unlocker thread. click step 1, it loads the RUU, i follow the steps, says upgrading from image version 2.19 to Hard-spl. i click next, says now upgrading and shows the status bar at 0%. after about 10 - 15 secs, windows pops up on computer screen and says "error 202: connection. please make sure your device is connected to your computer, check the cable, blah blah"
tried mulitple times, each time restarting pc and device. device still works as before, nothing changed at all.
any ideas?
come on guys, anything?
someone has to have a clue
what do you see when you get into the bootloader screen. Get into the boot loader by pressing down and holding on the camera button while sticking your stylus into the reset hole for a good 5 seconds.
it says:
athe100
ipl-v2.02
ATHE100
SPL-v1.10.0000
i followed the tutorial video in the unlocker thread, and on the video when the guy done step 1, it asks to install something on the phone, enablerapi.cab by the look of the video. i never get this, just says "connection error"
thx for your reply Eaglesteve, appreciate it
This mean your flashing was not successful yet.
I think you should first reflash your original ROM back to restore it back to working condition again first. Then repeat the step and keep the finger cross this time.
You do this by first going into the boot loader mode, then connect up the usb cable, and run the RUU (RomUpdateUtility) program of your ORIGINAL stock ROM.
Edit: Sorry, did you say that your device is actually still working? Then you don't need to reflash the original ROM.
Do you have .net Framework 2.0 installed with the services packs on your XP machine?
i think there might be a misunderstanding.
the rom is untouched. i cant complete anything. here is what i did from the beginning. new stock phone. performed hard reset. went through customisations as per normal. stock rom installed.
plugged device into pc running xp. active sync, connected and synced. ran unlocker tool version 3. press step one, unlocker minimises and open RUU. says checking device for version details, finds them, says image version 2.19. great, that shows it can communicate with device. i click next a couple times, eventually it gets to the status screen that shows percentage of flashing and a warning at the bottom that says, "be aware this might take 10 mins" or something like that. about 15 secs, nothing happens, then new window appears saying "error 202: connection, please ensure device is connected, check cable/cradle"
i click ok, RUU exits, unlocker reappears, and says step 1 complete.
make sense?
PashaK said:
i think there might be a misunderstanding.
the rom is untouched. i cant complete anything. here is what i did from the beginning. new stock phone. performed hard reset. went through customisations as per normal. stock rom installed.
plugged device into pc running xp. active sync, connected and synced. ran unlocker tool version 3. press step one, unlocker minimises and open RUU. says checking device for version details, finds them, says image version 2.19. great, that shows it can communicate with device. i click next a couple times, eventually it gets to the status screen that shows percentage of flashing and a warning at the bottom that says, "be aware this might take 10 mins" or something like that. about 15 secs, nothing happens, then new window appears saying "error 202: connection, please ensure device is connected, check cable/cradle"
i click ok, RUU exits, unlocker reappears, and says step 1 complete.
make sense?
Click to expand...
Click to collapse
Yes, indeed I misunderstood. Please see my revised post above.
yes .net framework 2 and 3 installed plus all service packs.
PashaK said:
yes .net framework 2 and 3 installed plus all service packs.
Click to expand...
Click to collapse
I wish I could be of more assistance, but I'm not sure why your connection does not stay firm throughout the process. Perhaps you could PM Olipro for assistance?
yeah i might have to. i was thinking about trying it from a server 2003 machine, in case it is something wrong with my xp pc. i also have a vista pc but i dont trust vista enought to do it.
you think server 2003 would be ok to do it from?
thanx for helping a fellow aussie out
PashaK said:
yeah i might have to. i was thinking about trying it from a server 2003 machine, in case it is something wrong with my xp pc. i also have a vista pc but i dont trust vista enought to do it.
you think server 2003 would be ok to do it from?
thanx for helping a fellow aussie out
Click to expand...
Click to collapse
No worries mate.
Perpahs you want to try a newly installed XP machine? You know what it is with older machine. After a while all kinds of stuff goes in to corrupt it. I vaguely remember a post where someone who did not succeed with an XP machine later got it workign with another XP machine.
I think it is not possible for Olipro to anticipate all the possible conditions which might affect the program.
So, give it another go with a different, cleaner XP machine.
Good luck.
thanx, i might try that tomorrow if olipro has no other ideas. this is a newly formatted pc. i format quite regularly, being a network administrator, i keep all my pc's very clean.
i will report back my results when i get this solved.
thanx again
PashaK said:
thanx, i might try that tomorrow if olipro has no other ideas. this is a newly formatted pc. i format quite regularly, being a network administrator, i keep all my pc's very clean.
i will report back my results when i get this solved.
thanx again
Click to expand...
Click to collapse
Your cable has no problem I assume? Do you have problem doing ActiveSync in normal use?
the cable is the same one i got with the device. hardly used. everything in activesync works fine. i can browse files. install programs, everything works as it should, except the unlocker
I had a very similar problem when i tried to make the WM6 upgrade...
The reason for the connection failure:i had my Ameo connected via an external USB-hub.Which worked perfectly when i just wanted to synchronise or browse files...but when i wanted to make the upgrade i got the same connection error at exactly the same point.
Sticking the cable DIRECTLY into one of the PCs USB-ports solved the problem.
Ok,last night i tried the unlocker myself.
I put the cable directly into one of the ports of my PC...and got that connection error!
Tried to reinstall WM6-which,as mentioned in my post above had worked...still connection error.
Disconnectedt the USB from my pc,and simply put it back in a different port.
WM6 installation worked,and unlocking the phone afterwards worked,too.
No connectin errors anymore.
So this definitely is some sort of USB connection error.
Just try different ports.
Hi!
My friend bought an XDA II and he wants to upgrade it from WinMo 2003. How can he do it?
I searched the forum, but couldn't find any topic describing the process.
Can someone help us?
the
readme.txt included in the rom zips describe what to do step by step
Upgrading the xdaii rom
Hi ClioRS
Just upgraded my xda 11 last month and new to all this so and ittook me weeks to find out what to do and how to do it, and i have been in it for 20 years/////. So thought i would shorten your searching time.
As I said I am new to all this but a good rom is the wm 6.1 Dark Lord by xda developer "ATHER".
I have been using it for a month now and its very stable, (I will have to donate some £ to him).
When you download the RAR file from his thread, shown at the bottomof this message. All the instructions are zipped into the RAR, as well as all the upgrade files.
Please find Athers upgade "Newbie instructions" below. Takes about 30 minutes to clean and upgrade the Rom.
Ather's Newbie instructions:
Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
Run HimaUpgradeUt.exe
Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading ROM Image, please wait....',
but as long as the PC says it is done, then its all OK.
Detach your device from the cradle.
Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
I have included Athers instructions above because I know I was lost and took me two weeks to find and understand what was going to happen to my beloved phone.
Athers Dark lord link....is
http://forum.xda-developers.com/showthread.php?t=404179
You can download it from his thread
OK
Huntersbane..
Hey there, i am new to all this so bare with me and help if you can pls. I am trying to update my xda ii to wm 6 as per link. I follow the instructions and put it in to boot mode, then sit in cradle so now says USB. Click on the application and starts to do its thing, then says ERROR 101 connection error and tells me that the device has to be turned on. Been trying all night can anyone help pls.
try this?
you also need Microsoft ActiveSync 4.5 installed on your computer and the HimaUpgradeUt_noID.exe does not get on with vista or windows 7 xp sp3 is the best [can be run on x32 bit vista but needs some playing about with the drivers]once you have got it installed restart computer then follow the above instructions.
u cant go wrong!
advanced15 said:
you also need Microsoft ActiveSync 4.5 installed on your computer and the HimaUpgradeUt_noID.exe does not get on with vista or windows 7 xp sp3 is the best [can be run on x32 bit vista but needs some playing about with the drivers]once you have got it installed restart computer then follow the above instructions.
u cant go wrong!
Click to expand...
Click to collapse
Hi. I'm having trouble, I was just trying to upgrade my girlfriends XDA II from my Windows7 pc without realizing it wouldn't work. The XDA now only shows "USB v1.01". And the upgrade utility fails to connect to it. I have access to a pc with Vista 32bit. Do you know what it is that needs doing to the drivers to make it work on Vista 32bit?
Any help would be much appreciated.
Regards,
-Scott
Hi all!
With advice of Dixiesmu at this thread: http://forum.xda-developers.com/showthread.php?p=6440715#post6440715 i try yo HardSPL my little Prophet. But I can't. Every time I try it says sleep4.exe isn't a 64bit program (I use Win 7 64bit. I installed cloudy's driver http://forum.xda-developers.com/showthread.php?t=485293) but my PPC gets a white screen. In second try (PPC's screen still white) it starts a RUU and crashes at getting information thing. What can I do? Is there a solution?
zephyri-xr said:
Hi all!
With advice of Dixiesmu at this thread: http://forum.xda-developers.com/showthread.php?p=6440715#post6440715 i try yo HardSPL my little Prophet. But I can't. Every time I try it says sleep4.exe isn't a 64bit program (I use Win 7 64bit. I installed cloudy's driver http://forum.xda-developers.com/showthread.php?t=485293) but my PPC gets a white screen. In second try (PPC's screen still white) it starts a RUU and crashes at getting information thing. What can I do? Is there a solution?
Click to expand...
Click to collapse
Use prophet upgrade from my signature! It is explained the method to flash on x64.
Device gets in bootloader but PC says no device connected
zephyri-xr said:
Device gets in bootloader but PC says no device connected
Click to expand...
Click to collapse
Disable drivers signiature on windows start and reinstall drivers for prophet!! It is esential to disable drivers signiature on windows x64 !! Read carefully my propget upgrade post!!
Wow! I'm sick of soft reseting. I managed the driver thing but when hSPLing it gives an error "cant load stuff. stuff. stuff".
Update: The exact error: The Update Utility can not open the requested file. Please check your Update Utility.
zephyri-xr said:
Wow! I'm sick of soft reseting. I managed the driver thing but when hSPLing it gives an error "cant load stuff. stuff. stuff".
Click to expand...
Click to collapse
Look into device manager and if you have an yellow triangle on the prophet drivers then the drivers is not correctly installed or drivers signiature function is activated.
There's nothing with a yellow triangle Error comes in RUU after the information thing and pressing Update button.
Update: After the refreshing Device Manager I found a yellew triangled device. Microsoft USB Sync.
How does the SPL that showing on start up look like After the hSPL? Mine still 2.20.0001
zephyri-xr said:
There's nothing with a yellow triangle Error comes in RUU after the information thing and pressing Update button.
Update: After the refreshing Device Manager I found a yellew triangled device. Microsoft USB Sync.
How does the SPL that showing on start up look like After the hSPL? Mine still 2.20.0001
Click to expand...
Click to collapse
For me is the same. You don't overwrite device SPL when you use my tool. It only emulate hSPL for flashing. When hSPL is correct installed your device display a white screen. When you have this white screen you have to check drivers instalation, yellow stuff, etc.. to ensure you have right drivers installed. Only if everything is ok, push the update button. My tool can automaticly detect if your drivers are proper loaded and block update if are not loaded.
I have two devices in Device Manager. PocketPC USB Sync is working but Microsoft USB Sync is with a yellow thing.
Whatever, You say my device is hSPL'd and ready to new roms right? Thx a lot for your help(s)! You're great dude! Cheers!
Everything was good until i get error while flashing a rom. Really fells me like a crap. Grr.