no one read the upgrading section, I start it again here
http://forum.xda-developers.com/showthread.php?t=355037
but please reply in that section
wow,awesome tool chopin,welcome back.i have been searching for this for a long time,thanks friend.
thanks a lot my best friend
Related
hi, everybody i'm very interesting to upgrade my atom from wm5(wwe) to wm6(wwe,with htc touch flo function.but i'm confuse about which rom is suitable to me and where can i download the rom version .please forgive me that i'm still fresh about upgrading. thanks for help.
YOU are NEW so we will forgive you..but first..READ the RULES of POSTING.
http://forum.xda-developers.com/showthread.php?t=221545
1. Check if something hasn't been asked before
Some questions just keep popping up over and over. Please use the 'search' function in the menu above each and every page in the forum. Try entering a few keywords to see if your question has been asked before. If it has, please read the topics and see if you can figure it our from there.
(We acknowledge that part of the problem is that we never created a well-organized system of FAQ (Frequently Asked Questions) documents. But then we're doing lots of cutting-edge stuff, and we'd rather build cool tools than work on perfecting FAQs.
----------------------------------------------
PLEASE USE A SEARCH option of this forum.
For ATOM ROM, its easy to see the thread about the available ROM.
Which is BEST? The thread itself will give you the answer.
About touchflo ROM, we dont have ROM with touchflo already. YOU need to install it separately.
http://forum.xda-developers.com/showthread.php?t=333513 (touchcube.go to general discussion for the touchflo=READ)
THE MAIN KEY HERE: DONT BE LAZY on reading..HOPE u understand my friend. We're tired of answering questions that has been hundred times asked.
thanks very much ,i had successfully to upgrade to wm6 but cannot install the touch function even i follow all the intrution.anybody can help.
[email protected] said:
thanks very much ,i had successfully to upgrade to wm6 but cannot install the touch function even i follow all the intrution.anybody can help.
Click to expand...
Click to collapse
Go on that thread and ask not here..ur off topic again.
iv update my XDAll from windows 2003 to wn5 and now the mic will not work dos any one know how to fix this please you can e-mail me at [email removed] many thanks
Hello and welcome to the forum!
Please read these helpful rules.
I removed your email to protect it from SPAM. Please put it in your profile instead, that way people will still be able to email you but you wont get junk mail!
I also moved your post to the proper forum where people who know the answer are more likely to see it.
Finally, you have to specify exactly what ROM you upgraded to. It is most likely a problem with ROM version and trying another one will solve the issue.
Got my HTC Touch pro on monday and i wanna install ROMeOS i downloaded it and extracted it but i dont know how to install it? I have activesync set-up via USB cable.
Thanks, MC
Please read before you post. There is a thread stickied in this forum about flashing your first rom. Also check the wiki for more information. Do not start a thread for topics that have already been addressed in detail.
Hi all,
I am new to the HTC Hero, which i get in about 1 week. I am NOT new to the forum.
I have a HTC Touch HD (Blackstone) which i flashed a lot.
But now i am going to Android, and i wanted to know a few things to be sure before i completely destroy my Hero in 1 hour..
I see of course, after looking for myself (maybe not good enough), that there are some Sticky's in the forum which explains CID bypassing, make Root, etc..
Is there any topic or document which can explain me step by step, with some referrals to topics on forum, and nessecary files, how i can flash my HTC Hero?
for example: here, here and here (blackstone examples)
Thanks guys
everyone is new at one time or another but seriously you are adept enough to post links to threads for blackstone kacjking you SHOULD have enough about you to be able to read the threads on rooting the hero.
Its a doddle to do and reading a few threads wont kill you.
The threads directs you to the MODACO siter where the files are kept. The Unlcker.com has videos to follow AND links to the files needed (again all these are held in the threads and stickies)
You wont kill the hero and its as easy to unlock these as it is the blackstone (I used to have one so I know)
Enjoy and search is your friend!!
Gurry
btw the thread on rooting is this - http://forum.xda-developers.com/showthread.php?t=552591
Sorry for the quick posts but the edit function wont work on my work pc!!
thank you, this is helpfull
i already have read the posts about the rooting stuff.
but i just wanted to be sure before i root things etc (hehe) that i wont kill it..
i wont so i am pleased
thanks for the answer!
my sister flashed a rom on her i9300 and didn't backup the efs folder. and left me with the mess.
i flashed a stock 4.0.4 rom on it but the imei is still 0049....
i tried to fix it on windows xp and w7.
there are a lot of solutions out there but none of them worked for me.
so far i tried:
1) Ariza patch
2) i created a text document using sgs3 nv item generator to use with the different recommended software.
for this to work i had to connect my s3 as a usb com port but that didn't really work because the *#7284# dial command did nothing. i used the SManager to run a script that is supposed to do the same thing. the phone did show up in the device manager, but as a samsung mobile usb modem. using USBDeview i saw that it was listed as port COM9 (COM18 on XP), and most of the guides out there show the connection as COM1.
maybe as a result the following programs that were recommended to change the nv items did not work. maybe it was for different reasons:
-Maui META 3g V6 - could not connect to phone. it only offered to connect to COM8 which was also listed as samsung mobile usb modem but was shown in USBDeview as inactive whereas the COM9 was active.
-NV items reader/writer - i picked the samsung mobile usb modem port (COM18) and connected to it, but once i tried to read or write the program would reply "failed... phone does not answer"
-CdmaDevTerm v.2 - couldn't understand how to work it and found no guides. i fiddles around trying to write an IMEI # but it kept getting stuck.
-cdma workshop 2.7 - managed to connect to the port but when i clicked the read button it replied "failed... phone does not answer" and i didn't get the phone's info. it still gave me this information:
first nv item:0
last nv item: 3994
-qpst - i couldn't even pick the port i wanted. only COM1, which was no help.
anyone has an idea what i did wrong?
thanks,
shahar.
Look at the imei thread in general > sticky roll-up. Please don't post duplicate threads. 10 times a day this is posted.
Ariza patch isn't even ANYTHING to do with this. Suggest you stop and read before you brick your device with multiple solutions.
Qpst - not for this phone
Cdma - not this phone
Imei can be fixed in mobile phone shop for £20. Please read the existing thread.
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
thanks. i did try to read as much as i could before asking.
i read the imei thread, though i didn't understand a lot.
are you sure qpst doesn't work? this guy gave me the wrong impression then - {www} youtube(dot)com/watch?v=_d2Nsb23ycw[/url]
so no help here, huh?...
rootSU said:
Look at the imei thread in general > sticky roll-up. Please don't post duplicate threads. 10 times a day this is posted.
Ariza patch isn't even ANYTHING to do with this. Suggest you stop and read before you brick your device with multiple solutions.
Qpst - not for this phone
Cdma - not this phone
Imei can be fixed in mobile phone shop for £20. Please read the existing thread.
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Click to expand...
Click to collapse
Qpst is not for the i9300. It doesn't have anything qualcomm related inside. There are many other versions of the s3 that do. Just not ours.
Flash latest rom mg4 or later to ensure you can read efs v2. If that fails send for repair. These are not new answers. Reading is understanding. Following videos on youtube is blindly jumping off a cliff. Read the sticky threads (as I suggest) and if you don't understand anything in a particular thread ASK in that thread.
All the answers are in that thread. There are no other answers. Read. Learn. Understand. Stay away from YouTube. This is my advice to you
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
thanks for the advice
rootSU said:
Qpst is not for the i9300. It doesn't have anything qualcomm related inside. There are many other versions of the s3 that do. Just not ours.
Flash latest rom mg4 or later to ensure you can read efs v2. If that fails send for repair. These are not new answers. Reading is understanding. Following videos on youtube is blindly jumping off a cliff. Read the sticky threads (as I suggest) and if you don't understand anything in a particular thread ASK in that thread.
All the answers are in that thread. There are no other answers. Read. Learn. Understand. Stay away from YouTube. This is my advice to you
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit
Click to expand...
Click to collapse
No problem. Just to be clear, never follow advice for other models of the s3. Only specifically the i9300. All the other models are completely different and advice from those phones may brick yours
-----------------------
Sent via tapatalk.
I do NOT reply to support queries over PM. Please keep support queries to the Q&A section, so that others may benefit