Related
Hello,
I bought the XDA IIs from a friend of mine in the U.K a month ago.
Everything works fine except that the STYLUS DOES NOT LOCK on to the groove provided behind the phone.
No matter how hard I push in it just would lock!!!
It was locking fine just an hour ago!!
After I charged the XDA IIs through a hotsync cable this problem seems to have arised.
Is there anything I can do at home to rectify the problem.
PLEASE PLEASE PLEASE HELP!!!
P.S - I have tried with a new pair of styli though and even they wouldn't lock in.!!!
Same problem here
I have learned to use it without the "pen". Losed two already!
nannlp said:
Hello,
I bought the XDA IIs from a friend of mine in the U.K a month ago.
Everything works fine except that the STYLUS DOES NOT LOCK on to the groove provided behind the phone.
No matter how hard I push in it just would lock!!!
It was locking fine just an hour ago!!
After I charged the XDA IIs through a hotsync cable this problem seems to have arised.
Is there anything I can do at home to rectify the problem.
PLEASE PLEASE PLEASE HELP!!!
P.S - I have tried with a new pair of styli though and even they wouldn't lock in.!!!
Click to expand...
Click to collapse
YES!!
:lol: Fingers work better than the PEN
AND leads to a form of exercise too... :wink:
The only drawback being while typing multiple letters get punched & b'comes a pain to delete them all :evil:
Re: YES!!
Could be VERY "handy" to have more "finger-optimized" options on the screen... I now really find the "stick" a ver slowww "extra". :roll:
nannlp said:
:lol: Fingers work better than the PEN
AND leads to a form of exercise too... :wink:
The only drawback being while typing multiple letters get punched & b'comes a pain to delete them all :evil:
Click to expand...
Click to collapse
finger optimization
huh !!! you could do something like a more finger friendly usage with XDA IIs!??? :shock:
How do you do that?
HELP!!!1
THANK YOU
Pockpctechs.com I thought had a fix for this?
I have this same problem but I just bought more replacement syluses and also make sure the device is in the normal position when I am wearing it.
Check www.pocketpctechs.com
what i did is open the back housing, put rubber sticker inside the place where stylus stay. now is tighter than before.
Hello
same problem, but realy easy to fix.
You have to use insulating tape (sorry, i don't know if this is the correct english name. This tape is used for insulating two elettrical wires connected togheter.)
So, you have to cut about 4mm x 1.5cm of this tape and then you have to turn around it on the top of your stylus.
This will produce a little gain of soft thickness right in the place where the stylus is in contact with your PDA.
My stylus slot was broken about one year ago: i used this insulating tape, and i have never lost my stylus.
follow some pictures... i have used white insulating tape in order to produce cleat photos: of course, you have to use black tape, as you can see in the last picture
Please try this link posted in wiki. This has details of how to fix a loose stylus.
http://wiki.xda-developers.com/index.php?pagename=BA_Sty_stopper
Regards
Sethuram
O2XDAiis
May need to modify length of tape, so experiment
Thank you Ronzino for this idea . I am now trying it out and it seems very good and yes, we do call it insulating tape in English btw, (at least in UK English).
I think it depends on the thickness of the insulating tape used, but I have found that I needed to cut the tape a bit shorter, for the stylus to fit. So it is worth experimenting on this.
I am guessing that the glue might soften in very hot weather, causing the tape to slide a bit, and make a bit of a mess, but this seems a minor problem compared to having to open uo my Blue Angel, which I reluctant to try. One can always clean up and use a fresh bit of tape.
I dare say it might be handy if manufacturers could perhaps produce stylus' in a way that overcomes this problem. One stylus I have seen has a small, rear springed, ball bearing inset on one side of it which would solve this problem. Unfortunately they do not seem to do these with the Blue Angel pecs in mind though.
almunday said:
Thank you Ronzino for this idea . I am now trying it out and it seems very good and yes, we do call it insulating tape in English btw, (at least in UK English).
I think it depends on the thickness of the insulating tape used, but I have found that I needed to cut the tape a bit shorter, for the stylus to fit. So it is worth experimenting on this.
I am guessing that the glue might soften in very hot weather, causing the tape to slide a bit, and make a bit of a mess, but this seems a minor problem compared to having to open uo my Blue Angel, which I reluctant to try. One can always clean up and use a fresh bit of tape.
I dare say it might be handy if manufacturers could perhaps produce stylus' in a way that overcomes this problem. One stylus I have seen has a small, rear springed, ball bearing inset on one side of it which would solve this problem. Unfortunately they do not seem to do these with the Blue Angel pecs in mind though.
Click to expand...
Click to collapse
This was suggested a while back (in fact, there was something about this in the wiki). For the most part, the section of the casing in charge of holding the stylus in place gets warped/cracked from use. Making the body of the stylus thicker allows the center to be locked rather than the top. Not sure about the glue, but for this to go bad, temps have to be rather high...
Instead of wrapping tape around your stylus, you can also take a 4x6mm piece of soft rubber and stick it inside the housing just behind the hook which should hold the pen.
You need 1,5mm material, if the hook is still there and you just want to improve the tightnes of your clasp, and 3-4mm if it is gone.
edit: replaced the missing clasp by using some piece of nylon- attached pic shows where i've taken it from. Glued this tiny part into the bay of the broken clasp and placed some mossrubber behind it as described above.
Works really good, and no tape smearing around in your housing
(Note: don't use cyanacrylate, it's like cancer to our housing...)
I have been having this problem of stylus keep falling off from the silo.
Does anyone know how to fix it??
Thanks.
I don't know the solution (never needed it) but i remember seeing posts with tips when i registered last year. You must make a more extensive search
I put a piece of scotch tape around mine and I've had no problems since I did that. One wrap around was enough to keep it snug - right in the middle of the stylus.
here you go, maby it will help someone:
http://www.pdagold.com/articles/detail.asp?a=274
I've been having this problem,and just tried this solution. Give me a day and I'll tell you how it works out
Edit:
Well, it's been a day, and the stylus is being held in there better than ever. Definitely a recommended fix if you are having this problem
yeah, i find that the scotch tape trick works perfect. i put it right around the "neck" of the stylus - that would be nearest to the gray head part.
Falling Stylus
I've read on a website, don't have any link anymore, that if you will turn your mobile on the back, and remove your battery, there will be 2 openings where you can see some steel. If you take some sort of pen, or mini-screwdriver you can push against it, and when it clicks, your stylus must be a little tighter in his case. Didn't test it, because i lost my stylus because of the same problem
coldejong said:
I've read on a website, don't have any link anymore, that if you will turn your mobile on the back, and remove your battery, there will be 2 openings where you can see some steel. If you take some sort of pen, or mini-screwdriver you can push against it, and when it clicks, your stylus must be a little tighter in his case. Didn't test it, because i lost my stylus because of the same problem
Click to expand...
Click to collapse
yeah me too did it last year in sep2007.my kjam since then works well & i haven`t lost any thing up to date.
precaution- there are some plastic parts so pls be carefull
Solution to stylus falling out
I bought some sticky tack (you can get it at office supply stores) and placed a small amount in the channel. That seems to hold my stylus in with no problems.
Tape option is the best. I lost two stylus due to falling stylus and this time I put a small amount of tape on the outer edge and its perfectly fit in the phone. No more falling stylus.
I opened the phone, added a drop of hot-glue behind the little plastic pin and it holds the stylis like it was new.
The same trick I also applied to my universal, only there I added a bit to much, and the stylus now doesn't come out easily, so I need to use a little more force.
Hey guys - does anyone know of any after-market battery covers for the HD that would be metal - specifically for the purpose of attaching to a magnet? I purchased one of those magnetic "cradle" kits that is basically just a big magnet you stick onto whereever, with a little metal slab that you stick onto the back of your phone. Then - you can just stick the phone up close to the magnet and it sticks - a perfect low-profile car cradle. The metal slab that sticks to the back of the phone is thin - it doesn't really stick out any further than the camera housing - but it still isn't as sleek as just the phone by itself. I thought a replacement battery cover that sticks to the magnet would be perfect. So... does anyone know of any? Or perhaps a vendor that could custom-machine one?
SolusCado said:
Hey guys - does anyone know of any after-market battery covers for the HD that would be metal - specifically for the purpose of attaching to a magnet? I purchased one of those magnetic "cradle" kits that is basically just a big magnet you stick onto whereever, with a little metal slab that you stick onto the back of your phone. Then - you can just stick the phone up close to the magnet and it sticks - a perfect low-profile car cradle. The metal slab that sticks to the back of the phone is thin - it doesn't really stick out any further than the camera housing - but it still isn't as sleek as just the phone by itself. I thought a replacement battery cover that sticks to the magnet would be perfect. So... does anyone know of any? Or perhaps a vendor that could custom-machine one?
Click to expand...
Click to collapse
I made my own magnetic car holder solution. Didn't cost much and can't imagine it work better than this...
I can't see what you've done there... It looks like some sort of metal on the battery itself, so that the regular cover works fine... What is that? How is it affixed?
Jouh has placed 2 razor blades on the battery.
Cool! I'm going to try that...
just don't take ur phone to the airport...... they might think ur going to use the razorblades for other non magnetic purposes.
Ohh! Good point! I would have completely forgotten about them and then been really screwed - I actually have to run my mobile through an X-ray every day at work... That could be an issue. Oh well - back to the drawing board...
just do the same with any thin metal i.e. sheet steel.
spzero said:
just do the same with any thin metal i.e. sheet steel.
Click to expand...
Click to collapse
I really wouldn't recommend directly attaching the phone to strong magnetic sources. It may impede the functionality, reduce or affect the battery operation, interfere with the many antennas in the phone, not to mention run the risk of corrupting memory sticks etc?
The phone itself isnt that heavy so probably wouldnt need a strong magnet, but you'd want to use something quite strong just to hold it in place. Imagine driving over a speed bump or pot hole which dislodges the phone and makes it go sliding across your dash board and out of an open window. (worst case scenario..)
If youre looking for a quick release holder I would recommend something that you clip the phone into like those hip holsters and then find one that has a socket connection to a window mount.
makaveli2g said:
I really wouldn't recommend directly attaching the phone to strong magnetic sources. It may impede the functionality, reduce or affect the battery operation, interfere with the many antennas in the phone, not to mention run the risk of corrupting memory sticks etc?
The phone itself isnt that heavy so probably wouldnt need a strong magnet, but you'd want to use something quite strong just to hold it in place. Imagine driving over a speed bump or pot hole which dislodges the phone and makes it go sliding across your dash board and out of an open window. (worst case scenario..)
If youre looking for a quick release holder I would recommend something that you clip the phone into like those hip holsters and then find one that has a socket connection to a window mount.
Click to expand...
Click to collapse
I used the same razors and the same magnet (This one) with my SE P1i for 1½ year without any issues.
And the phone doesn't move 1 mm even driving over the biggest speed bump in Sweden.
makaveli2g said:
I really wouldn't recommend directly attaching the phone to strong magnetic sources. It may impede the functionality, reduce or affect the battery operation, interfere with the many antennas in the phone, not to mention run the risk of corrupting memory sticks etc?
The phone itself isnt that heavy so probably wouldnt need a strong magnet, but you'd want to use something quite strong just to hold it in place. Imagine driving over a speed bump or pot hole which dislodges the phone and makes it go sliding across your dash board and out of an open window. (worst case scenario..)
If youre looking for a quick release holder I would recommend something that you clip the phone into like those hip holsters and then find one that has a socket connection to a window mount.
Click to expand...
Click to collapse
I honestly couldn't think of one thing that a magnet could have an effect on in the phone, certainly not the memory. The only type of memory that is affected by magnets are HDD (because the data on the disks is stored magnetically) and credit cards (once again, data stored magnetically). However, RAM/ROM is completely different and relies on gates and latches to store data, neither affected by magnet. Not to mention even if it did have an HDD (like old school mp3 players/iPod) it would take a strong magnet (mainly electromagnet) to corrupt the memory. Likewise, I can't foresee it having any affect on the battery or interfering with the antenas (unless you're using some super strong magnet....which you're likely not)
One of the only build quality problems i have with the Touch HD is that the battery cover creaks when pressed in certain spots.
To revive this topic, does anybody know of an actual aftermarket battery cover for this phone, preferably metal?
I searched google to find no results. It seems like it would be a good idea to make these
You can also shave the inside of the battery cover with a small sander. Than add ANY kind of magnet that will than fit inside the cover. The plastic cover is THICK so you can shave enough for some type of magnet.
I would also like a metal/rubber etc back cover. The quality of the orginal cover is driving me nuts..
Has anyone found this kinda aftermarket item?
sudo_x60s said:
I would also like a metal/rubber etc back cover. The quality of the orginal cover is driving me nuts..
Has anyone found this kinda aftermarket item?
Click to expand...
Click to collapse
Any news on that topic?
.. my apologies if this not the appropriate place to post this, but I need help..the little battery door/flap that clips into place which holds the actual battery in place and covers the SIM card (not the black battery cover/antenna) has broken!!.. Now whenever the phone drops or is handled rough enough to cause the battery cover/antenna to come off, the battery slides out of place and the phone turns off.. this happens multiple times throughout the day..i'm ready to throw this phone into the far reaches of this galaxy to say the least... if thats not bad enough, the little chrome peice that surrounds the sensor part of the optical trackpad on the front of the phone has fallen out .. it really takes away from the beauty of the phone!.. any idea where I can find replacement parts for these???.. used or new, it doesn't matter ... If ANYONE can help me i'd be indebted to you for ever!!!
Try contacting HTC.. They make the phones and they should know.. And btw.. Handle your phone a little more careful..
Sent from my Legend using XDA App
Damn, i've always been afraid of that happening expirimenting and having to remove the battery frequently. Don't know anything to help you, sorry
I have the same broken part. Been looking around for this part for a while with no luck. HTC want £44 to replace it, only by sending it in for a repair. They will not sell me the part and I cannot find it anywhere.
I will keep an eye on this thread for more suggestions.
Tape? Although it would have to stick to the aluminum unibody. See if it works! My head's imagery seems like it could.
Yes, my Legend is basically held together with tape. Without it, the battery cover comes of very easily. It's been like this for about 6 weeks now.
I've also been in to my local Vodafone shop to see what they say. They will not repair it as it's a moving part.
Buy your Legend a silicone or rubber case. That should prevent black cover from falling off.
Sent from my HTC Legend
why don't u fill the gap between the black part and ur battery with a soft rubber?
i think it'll solve ur problem
I want this part too. The center clip mechanism has failed due to taking the cover off regularly.
Oh my goodness, I should stop switching SIMs every now and then. I'm scared, actually.
branch8 said:
Damn, i've always been afraid of that happening expirimenting and having to remove the battery frequently. Don't know anything to help you, sorry
Click to expand...
Click to collapse
I was thinking of placing a secundairy antenna on that part, so you would stil have an small antena if the lid is missing. or maybe even better reception.
If you still have problems with the battery cover/flap, here's what i did on my legend: Take out the battery, look inside the battery compartment, you'll see the four battery contacts/pins, and right next to them you'll see there is a small black square rubber, glued to a metal spring underneath. The spring is heavily glued to the chassis/plastic body. I took a small (but strong) set of tweezers, and pulled the thing off the phone (the spring + the small rubber attached to it), and my phone works perfectly now, with the broken flap. The thing is that the spring is actually pushing the battery out, for "easier" removal, thus making the battery loose contact/fall out on every shake/impact.
I think that the design of this part is the worst about the legend. On mine I have experienced that the grip is weaker and weaker, and now comes off quite easily (unintended).
UPDATE: So, the digitizer I bought developed a massive dead zone. I already contacted the amazon store I bought it from, they're replacing it for me. Why does this matter? Because now I get to update this post with pictures/video! So, yeah, I guess this guide should get a lot more helpful soon.
Update 2: Ok, so, I don't even know how to express my anger and frustration. This girl at work shoved my phone out of my hands and into the leg of a table, completely destroying my phone. So, yeah, sorry, I guess I won't be updating with pictures/video, because the amazon store isn't going to take the screen back now.
Yo, guys. If anyone noticed that I was gone, I'm flattered, since I don't post a lot. But yeah, I havent had my Optimus G in about a month, so I havent been on this forum. In that time, I went through my Second Motorola Atrix HD, a broken Galaxy S3, and even lived through Google Voice on my computer. It's an extremely long story, and kind of ridiculous, so I'll spare the details.
HOWEVER, I did finally just buy a replacement Digitizer and LCD screen, and successfully installed it, and I want to share tips for anyone doing it themselves.
When removing the back, after you've removed torx screws, start prying the back off from in between where the Sim card and MicroSD go. Where the back of the phone and the chassis of the phone are separate is much more obvious in that cavity, PLUS dents/dings from jamming a screwdriver in there wont be noticeable when you put the bay cover back on.
Don't force anything off. Make sure you've removed every screw, unclipped every clip, and removed ribbons from everything you're trying to take off.
Removing the battery is tricky. Be careful not to deform it too much, cause that's dangerous. But there are 2 strips of double sided tape running horizontally beneath the battery. Try to get something between the top one and the battery, then carefully pull the battery off the second strip with your hands. sticking too much stuff beneath it to pry it up is going to cause some trouble, so lifting it with your fingers might be better.
Remove the motherboard. detatch all the ribbons, antennae, everything, then pull up from the left, then slide left and out. This is how I got it out with the least resistance, but there is no science to it. If you've gotten this far, you can figure out how to pull it out without breaking it in half.
Components that need to be removed before LCD+Digitizer removal:
Motherboard
Battery
Camera
Just put them off to the side, you don't want them damaged during the next part.
WARNING! If you plan on saving your LCD screen, DO NOT DO THIS. The high heat will cook your screen and make it unusable. Only do this to remove a broken or unsavable Digitizer+LCD.
Alright, now pull out the heat gun. Alternatively, you can do what I did, and use a hair dryer. Not even kidding, this will work fine, and will be hilarious when you tell your friends about it.
On a high heat, start heating the screen. If you're using a heat gun, just do your thing, you know how it works. Hair dryer folks, keep the dryer very low to the phone, low enough to feel the dryer being pushed up by the air, holding it just high enough so it sort of hovers. (You'll know what I mean when you try it. If you don't, just keep it about half an inch off the phone.) Move the dryer along the edges of the screen, all the way around, thats where the glue is. It should heat up pretty fast.
Using your pry tool, start at the speaker grill and pry all the way around the phone. lifting just slightly upwards. If it's not extremely easy, apply more heat. Work all the way around, then pull the screen off. Be careful, it's likely you'll shatter the screen even more at this part if you're not careful. User Bozwell had an excellent suggestion (post 4), cover your screen in tape, then begin separating the screen to keep from getting glass everywhere. Great idea, Boz!
Alright, so from here on out, it's just reassembling your phone correctly. Piece o cake.
Firstly, put your new screen in. If it came with adhesive, it's up to you if you want to apply it now. I'd think you probably have to, but up to you.
If you're like me, and no adhesive was provided, hold off on doing anything for now. Just put the screen in the hole, and thread the ribbons through.
The motherboard lines up with some contacts on the chassis in a few places, but most importantly, there is a connection on the top left corner of the body, and the UNDERSIDE of the motherboard that needs to be made. I believe it's proximity sensor, but not sure. It's very difficult to tell if its attached, but look at what I'm describing, and try your best to mate them.
Don't forget ANY cables. Like, that's pretty obvious, but even when you're sure you didnt forget any, check again. The camera's ribbon is underneath the screen's, don't forget that one. I reassebled the whole thing, everything was working perfectly, except I no longer had any mobile connection. I couldn't imagine what I'd broken, since that's a whole different area, but going to phone status and checking my signal strength revealed I forgot to reconnect the white antennae (status showed my signal at -200,000 dbm). So, double check, because the more often you have to reopen your phone, the more flimsy it's going to get.
Alright, screw the plastic shielding back on, reconnect your battery, then flip the phone to be face up. Power it on, test the screen to make sure it's functional. If all is well, power off and glue the screen in. What I did, and I welcome anyone to tell me a better glue type or method, is plain ol Super glue along all the edges where the old glue was. Press it in, flip it over, and while it's drying, finish reassembling the phone (should just be make sure everything is screwed in inside, then put back glass back on.
If your screen wasn't functional, I guess try to get it replaced by whoever you bought it from, and leave your phone disassembled for when it gets to your house.
Alright, that's pretty much the thick and thin of it, it genuinely isn't that hard of a replacement. I've done a number of digitizer/lcd replacements, not bad at all. I hope this helped anyone stuck or wondering about anything. This video can be used as a rough example, but it goes really fast.
Good Luck!
replacement of lcd/digitzer
the removal was a nightmare for me. It was hilarious when the glass cracked it was exploding into a million little bitty pieces. I didnt use much heat, and there lied my problem. But yeah mine cracked in a way that it was completely unresponsive.
gruiz3 said:
the removal was a nightmare for me. It was hilarious when the glass cracked it was exploding into a million little bitty pieces. I didnt use much heat, and there lied my problem. But yeah mine cracked in a way that it was completely unresponsive.
Click to expand...
Click to collapse
Haha that's crazy, it bothers me how fragile this phone seems to be.
To keep the glass shards from going everywhere try covering the screen in tape before you start.
bozwell said:
To keep the glass shards from going everywhere try covering the screen in tape before you start.
Click to expand...
Click to collapse
Great idea, OP updated!
So, what would I do if the screen itself is ok and it's just the glass (and digitizer) that is broken?
MoFoQ said:
So, what would I do if the screen itself is ok and it's just the glass (and digitizer) that is broken?
Click to expand...
Click to collapse
You'll need a real heat gun, I think. You'll have to find a heat just hot enough to soften the glue, but not cook your lcd. Hair dryer method might work if you are extremely careful and very quick, but not sure exactly what the best method would be. Sorry
ripin150 said:
You'll need a real heat gun, I think. You'll have to find a heat just hot enough to soften the glue, but not cook your lcd. Hair dryer method might work if you are extremely careful and very quick, but not sure exactly what the best method would be. Sorry
Click to expand...
Click to collapse
I figured...though I've been eye-ing using the screen+digitizer+front housing if and when they get back into stock.
(digitizer only is also out-of-stock)