Hi,
I ve read that we have Wifi-chip inside but it is not activated ! Is it true? Does anybody have Wifi on his dual touch?
Thanks !
From what I know only the Japaneese version has the wifi enabled. We don't know if the wifi can be enabled or not on european model. There are other threads in this forum where some people are trying to active the wifi, but there is uncenrtainty about the presence of the wifi antenna inside the device.
Bye!
Thanks,
The guy on another website was telling that he had opened his touch and had seen the wifi chip but not the GPS chip...
elinono said:
Thanks,
The guy on another website was telling that he had opened his touch and had seen the wifi chip but not the GPS chip...
Click to expand...
Click to collapse
Please read a bit the other posts... GPS and wifi are embended in the same qualcomm chip : http://www.3gchipsets.co.kr/download...00_chipset.pdf
Related
Hi,
so...
my advantage with AP 3 Dual (SPL 1.20) shuts down while i try to connect with umts network.
When i try to connect he simply shuts down and i can only restart hin by pressing the powerbutton.
So...i've insstalled SpB, AP 3 addons: task manager, temp realvga comm manger, snapvue, htc home screen, opera 9.5 build 405 (irus addons), pocket rar, tcmp, realvga with german language....
does somebody have an idea why he's doing this?
no ideas?
the connection with hsdpa worked.
Knopfgesicht said:
no ideas?
the connection with hsdpa worked.
Click to expand...
Click to collapse
suggest you do a hard reset and setup connections before anything else if it works then its some where else
HTC Advantage 7510 no 3G
Anyone make a fix for the 3G in the US? I use AT&T and they have the same UMTS bands as the phone's claimed specs but AT&T said it won't work. So, I know that some patches or roms have been created to fix other phones with this same problem. Has someone done something similar for the 7510?
Quincy
It could be also a BATTERY problem.
In the Excalibur section device shutting down while trying internet connection is a well known problem due to battery problem. A lot of power requested (CPU, radio) old or defective battery.... shut down!
qsworld said:
Anyone make a fix for the 3G in the US? I use AT&T and they have the same UMTS bands as the phone's claimed specs but AT&T said it won't work. So, I know that some patches or roms have been created to fix other phones with this same problem. Has someone done something similar for the 7510?
Quincy
Click to expand...
Click to collapse
Probably want to post your question in the new 7510 sub-forum.
qsworld said:
Anyone make a fix for the 3G in the US? I use AT&T and they have the same UMTS bands as the phone's claimed specs but AT&T said it won't work. So, I know that some patches or roms have been created to fix other phones with this same problem. Has someone done something similar for the 7510?
Quincy
Click to expand...
Click to collapse
if it has the same bands, it will work. and as far as I can remember my athena worked fine on 3G on ATT when i was in the USA..
As I mentioned in a previous thread a week or two ago, the Canadian market was due a release of the Touch dual which allegedly has GPS enabled (Neon 400?):
http://gpsobsessed.com/mobile-gps/canadians-get-htc-touch-dual-via-bell-mobility-gps-enabled/
This apparently has been available since last week, so does anyone have one? Is the GPS confirmed?
I haven't heard anything about this touch dual version on these forums, but presumably there is a chance that the radio (or parts of it) may be ported to other Touch dual versions to enable GPS, or does this new version have extra hardware?
From what i have seen on this forum, the touch dual has a gps in it, but do not have a gps antenna... so I think canadian touch dual are new unit with new hardware wich mean we can't expect to enable gps on other touch dual phones.
Judge584 said:
From what i have seen on this forum, the touch dual has a gps in it, but do not have a gps antenna... so I think canadian touch dual are new unit with new hardware wich mean we can't expect to enable gps on other touch dual phones.
Click to expand...
Click to collapse
yes... i too guess it has a special antenna built inside. But MAYBE previous neons ALREADY HAD this antenna? AFAIK the Dual that was disassembled in the Wifi thread has been a different one...
Yah
Hey,
I have one of those duals' from Telus it does infact have gps on it. Only problem is no roms avalible anywhere.
I can confirm 100% that GPS works on the Canadian Neon400 Touch Dual with Telus. Just follow the instructions here that were originally written for the HTC Touch:
http://forum.ppcgeeks.com/showthread.php?t=31437
Do not download the rom. Start at the "QPST GPSOne Settings" section.
I'm now rocking TomTom 7 using AstroGPSLauncher, and it works. Locks take longer than my old Touch, but at least it works... with the stock Telus rom.
bond7734 said:
Hey,
I have one of those duals' from Telus it does infact have gps on it. Only problem is no roms avalible anywhere.
Click to expand...
Click to collapse
I once read somewhere that there is a program that can extract the ROM into a microSD card, utilising 2577 folder for self-executing when inserted. I'll come back with a link if I can find it again.
deepthroat said:
I once read somewhere that there is a program that can extract the ROM into a microSD card, utilising 2577 folder for self-executing when inserted. I'll come back with a link if I can find it again.
Click to expand...
Click to collapse
Somebody needs to find this so we can extract the SPL from the Neon400. You would have to compare the SPL to the other Neons and figure out what's different and why we aren't able to unlock it yet. Hope you can find it.
EDIT: It appears you cannot extract the SPL from the device, you have to extract it from a shipped ROM. I do not believe there have been any updates made available for either the Bell or Telus Neon400s. Are there any other providers of this phone that might have released an update that would provide an SPL?
tonwon420 said:
I can confirm 100% that GPS works on the Canadian Neon400 Touch Dual with Telus. Just follow the instructions here that were originally written for the HTC Touch:
http://forum.ppcgeeks.com/showthread.php?t=31437
Do not download the rom. Start at the "QPST GPSOne Settings" section.
I'm now rocking TomTom 7 using AstroGPSLauncher, and it works. Locks take longer than my old Touch, but at least it works... with the stock Telus rom.
Click to expand...
Click to collapse
I have a bell mobility neon 400 and tried with qpst but there is no gps tab at all. I was sure to scroll all the way to the right I am running official rom and it has gpsnav software installed. Am I missing something? Could the Telus model have the antenna and the Bell model not? I cannot get a lock in any gps software garmin mxt, igo 8, even the stock gps software wont lock on any sats
Hey. i Just found site offering spare parts of the GTab.
I found a 3G module.
My question is if it is possible to upgrade a WifiOnly Tab with a 3G module? Do i have to solder a lot?
Or doesn't the mainboard of the wifi version even have this solder pins?
you have an galaxy tab 10.1 wifi !!!
or do you really think you can simple build in an 3g module without space problems and slots??
BeatB said:
Hey. i Just found site offering spare parts of the GTab.
I found a 3G module.
My question is if it is possible to upgrade a WifiOnly Tab with a 3G module? Do i have to solder a lot?
Or doesn't the mainboard of the wifi version even have this solder pins?
Click to expand...
Click to collapse
The slot is not a problem. I can buy the housing with the 3g slot and replace it.
BeatB said:
Hey. i Just found site offering spare parts of the GTab.
Click to expand...
Click to collapse
Can you tell me the site url please? i need a new sim slot adapter. Because the original one is broken, because the F*****g manual in dutch
yes, google for trait tech.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Succeed or not?
BeatB said:
Hey. i Just found site offering spare parts of the GTab.
I found a 3G module.
My question is if it is possible to upgrade a WifiOnly Tab with a 3G module? Do i have to solder a lot?
Or doesn't the mainboard of the wifi version even have this solder pins?
Click to expand...
Click to collapse
Hi,
Do you tried to install 3G sim module on a tab only wifi?
What is the finality, it succeed or not?
Thanks for your reponses.
New 3G WCDMA GSM Android 4.1 MTK6577 1GHz WIFI GPS 4.7 Inch Capacitive Touch Screen Cell Phone N9300+
Network Support: GSM 850/900/1800/1900mHZ,3G WCDMA 850/2100mHZ ,Two Sim Cards
link to full specs http://www.ebay.com/itm/New-Android...0967528374?pt=Cell_Phones&hash=item27ce7573b6
NNNNOOOO !!!!!!!!
sidthegreatest said:
NNNNOOOO !!!!!!!!
Click to expand...
Click to collapse
where would i be able to find any rooting info or it is something not worth doing
jermzrdc said:
where would i be able to find any rooting info or it is something not worth doing
Click to expand...
Click to collapse
Search Google for that model / fake /clone MTK6577.
Its not a Samsung SGS3 .
Even a search of this forum may find an answer as enough fake / clone posts same model on here for some strange reason .Possible also check XDA Developers forums .
jje
Hello! Since i updated to 9.6.1 i have no signal on my phone.
Imei is okay, i do have wifi, bluetooth and gps.
I tried downgrading, installing custom roms, flashing modem and a bounch of other things and anything worked. I'm out of ideas.
My sim card does work and i did try another one.
My APN is configured correctly.
When i try to ennable radio from the testing thingy it doesn't work, also if i try to change the preferred network type it doesn't work.
On signal strength i'm getting -1 dBm 99 asu
i do have a notification from xiaomi SIM activation service, when i click on it a message displays saying "can't activate SIM card, make sure your balance is sufficient" (ofcourse it can't activate it, it dont have signal!)
Then i tried changing the coaxial cable, it didn't work
Anything else i could do? Maybe run a test with some developer tool or something.
I'm really tired of this, i desesperatly need this phone to work properly, sadly i can't afford a new one.
I'm aware it's in fact a software issue because it happened the moment i updated it.
I updated it from about phone, system update; so it wasn't my error.
I did contacted xiaomi customer service and they did not give a f*** about my problem.
Hello,
My issue is exactly the same, and i' ve tryed same solutions with no succes
I've read we're not alone to face this issue (many questions on forums) but no answer anywhere :/
Does some one could help ?
Thanks a lot
Chama44 said:
Hello,
My issue is exactly the same, and i' ve tryed same solutions with no succes
I've read we're not alone to face this issue (many questions on forums) but no answer anywhere :/
Does some one could help ?
Thanks a lot
Click to expand...
Click to collapse
Did you get any solution ?
Hello,
Unfortunately not
Chama44 said:
Hello,
Unfortunately not
Click to expand...
Click to collapse
Do one thing, try searching for network manually while having a working sim in your phone. If manual search terminates immediately or doesn't find any network then:
Maybe the RF power amplifier chip is dead or circuitry related to that chip has some defect.
Now if u get some network after manual search then you are good. Flash latest global fastboot rom in edl mode and I think it would solve the problem.
If still u didnt get signal then maybe the coaxial signal cable is disconnected or broken. Maybe the contacts which connect the usb board with the gsm antenna is dirty or broken. Or some components in series between the power amp chip and antenna is broken. If u have a multimeter u can check for continuity between power amp output pin and antenna pin of usb board.
Chama44 said:
Hello,
My issue is exactly the same, and i' ve tryed same solutions with no succes
I've read we're not alone to face this issue (many questions on forums) but no answer anywhere :/
Does some one could help ?
Thanks a lot
Click to expand...
Click to collapse
You might try activating the SIM and verifying the phone number. I have the Redmi K20 Pro and was able to fix this error. Go to Settings >> SIM cards & mobile networks >> Data roaming and set Overseas data roaming to "Always" (don't worry, this will only be for a few minutes). Let the activation services run again (you may have to repeat the activation attempt a few times), and your device should be able to activate the SIM and verify the phone number. When it's completed, you can turn the Overseas data roaming back to "Never."