spv m1000 no bluetooth hardware? - MDA II, XDA II, 2060 ROM Development

i've got a spv m1000, and when i open the bluetooth tray i get the following message
"there is no bluetooth hardware installed on this device"
anyone? maybe a romupdate will do some good? do i need to install something?
the spv m1000 device information
rom version 1.66.00wwe
romdate 02/20/04
radio version 1.10.00
protocol 1337.15
ext rom version (1.66... when installed)
btw. i did several hard resets (removing battery), installing extended rom and not installing extended rom.
none worked
i updated the radio rom to 1.17.00 and updated to the C_ShekharAKU7.0c.R40.P24_public wm6 rom. still the problem with bluetooth hardware error persists.
nobody had this problem and solved it

i have the same problem with my spv m1000
can anyone help ?

Hi. I'm getting the same problem with c_shekhar's WM6.1 on my M1000, havn't a clue why. Tried unintsalling programs and doing a hard reset, but still there.

Related

HELP HELP - Imate died in upgrade, now got only "USB v1

Hello
Can someone help me save my Imate ?
I got the official upgrade to 1.52.00 Ext 1.52.83 radio 1.06.01 from my existing CE image 1.03.00 Ext 1.03.20 and Radio 1.05.12
I ran this upgrade on a windows 98 with nothing else and the Imate connected over the USB cradle with power.
Then I got ERROR 101 - rerun the upgrade.
NOW, my Imate is dead and when I try the upgrade program I always get "ERROR 101".
What can I do to save it ?
Thanks, Dave

SPV M1000 Rom Upgrade

Hi
Ive just been on teh orange site, and I see there is a new ROM available http://web.orange.co.uk/story/sm_1047574.html
The new version has an operator version 3.661.230 (MMS version). But my SPV does not seem to have an operator version
Currently I'm running:-
Rom version 1.60.00WWE
Rom date 12/03/03
Radio version: 1.10.00
Protocol version: 1337.18
ExtROM version: 1.60.38
Is it worth upgrading?how will I benifit?
Cheers
JustinP
Hi,
Checked out the new upgrade from Orange and it works perfectly on my SPV M1000.
The benfits of upgrading are that you will be able to send MMS messages from your phone without having to configure everything yourself (which I had to do!)
The other benefits (apparently) are better radio and GPRS, but I haven't noticed any difference yet.
Also, while I was upgrading, I had a message saying there was a problem and to start again. Don't worry if this happens as I reconnected the phone and it installed fine.
Hope this helps!
Thank you!
First of all THANK YOU justinp for spotting this and sharing it with us!
I've also been calling Orange trying to find out about updates, but unfortunatly with no success.
Second to all:
a) I share justinp question, but my setup is a bit older:
Currently I'm running:-
Rom version 1.52.00WWE
Rom date 10/23/03
Radio version: 1.05.16
Protocol version: 1337.16
ExtROM version: 1.52.56
I could not find anything looking like the 3.661.230 where they indicated it.
b) Once I am going through the asshole of a a ROM upgrade, are there real advantage in going for the imate 1.72 update and going through a slightly more complicated procedure?
Just to put into context I already have installed thanks to this forum an SMS SW version I am happy with and I want to buy a BT GPS in the next two month so if you know for sure that it is not going to work either with my ROM or the new one from Orange please let me know!!!
THANKS!
Chris
Orange M1000 Upgrade ROM Thur 12th Aug 2004... Problem
Hi,
I upgraded my ROM to the latest from Orange UK and my bluetooth headset (Logitech) paired OK and I can hear the people talking, but they CAN'T hear me!
Anyone had this type of problem before? I have used the MMS version. Today I will try the NON-MMS version and see if that allows 2 way communication via Bluetooth
Thanks
Nitesh
I just upgraded my ROM and now I cant see the STORAGE folder. Anyone else have this issue?
Storage folder missing
I too upgraded my M1000 and when I did a restore from Sprite - It too made my storage and storage card disappear. In the end I just did a hard reset and manually installed my programs and did not do a restore.
Re: Storage folder missing
nbharadia said:
I too upgraded my M1000 and when I did a restore from Sprite - It too made my storage and storage card disappear. In the end I just did a hard reset and manually installed my programs and did not do a restore.
Click to expand...
Click to collapse
Hi,
You say you have problems with the Storage/Storage card going missing - when you performed the upgrade, were these still visible until you restored things with Sprite because this might be the problem if you are restoring an old configuration with an updated ROM.
I haven't tried my phone with a Bluetooth headset, I got the MMS version, will let you know if I have the same problem, but everything is working fine on mine at the moment.
Hi
I have installed the upgrade, everything works as well as it did before, time will tell if there are any improvements.
After an upgrade dont do a restore as the old backup is not compatible with the new OS. Its just the way PPCs work. I'm afraid you need to re-install everything from scratch, it too me about 4 hours, but its done know.
Cheers
JustinP
m1000 rom
hi guys
any chance someone could post just the extended rom from the up grade cheers
To get the upgrade click on the link I posted in the first post of this thread
help
Just tried this update and received an error message.
Took the phone out of the craddle and performed a soft reset..
Screen still says "Serial V1. 03"
I cannot get it to do anything.
How do you perform a hard reset? Have tried pressing reset button with no battery (battery catch up and down) and tried letting the case touch the pins on the phone which can reset it.
TRULY HELP!!! PLEASE PLEASE HELP (please!)
With thanks
Dave.
yep ive just done the same,
yep ive just done the same, been trying for 1 hour now to get it running but no luck.
just spent an hour on to orange trying to explain the phone now neads replacing but they cannot send out till tomorrow.
lets hope it has the new rom installled or i may be in the same boat tomorrow
It now works!!! PHEW!!
Tried the hard reset & nothing happens.
What I did was hard reset then tried the update again... software now tells me that phone is now not compatible with the update.
I then repeated the above 17 panic-stricken times (both reset then update) and eventually it started the update process. Has now finally completed.
I was so worried!
GRPS is still flaky and still waiting for the MMS message sent to myself to go through (a bit slow).
Quick question for those who have updated
Hi!
Could any of you that have done the update please tell me what ROM version do you get after the update? 1.52, 1.60, the last 1.72?
Have u noticed any improvement with the use of BT (expecially with GPS).
Thanks!
Chris
After the update you will get
Rom version 1.66.00WWE
Rom date 02/20/04
Radio version: 1.10.00
Protocol version: 1337.18
ExtROM version: 1.66.230
So far I see no imporvements
Cheers
JustinP
Hard reset ???
I also upgraded my SPV with this ROM with MMS. I found no improvements, but 1 major problem. Sometimes the SPV is in suspend mode, i wait for several of minutes and want to push the power button, the device doesnt seem to react. Putting in the cradle isnt working also and taking the battery out and in again is also a failure. So the only sollution is to hard reset the m1000. Since the upgrade (2 weeks ago) i performed 2 hard resets. You guys also got the same problem? Or do you know how to fix this? I tried to upgrade my orange rom to the original Qtek 1.72 rom, but i got a message 120: error country code. So any ideas?
Urguntly need rom upgrade for spv m1000 orange uk
please can anyone kindly give me the link to download
SPV M1000 ROM UPGRADE SOFT.
REGARDS
SARO
Re: Urguntly need rom upgrade for spv m1000 orange uk
saro said:
please can anyone kindly give me the link to download
SPV M1000 ROM UPGRADE SOFT.
REGARDS
SARO
Click to expand...
Click to collapse
http://web.orange.co.uk/assets/sw/RUU_v1.1_OrangeUK_v3.66.1.200_Ship.exe
Here you go, although this ROM is quite old now (check the date of the original posts!!
I really miss my M1000, it was my first PPC Phone!
Fin
Thanks for that link.
I needed to restore my m1000 back to 2003SE after an experiment in upgrading to WM6 and realised I didn't have the ROM.
Cheers
J
Thanks
Thanks for the link. have been searching for the rom for about 1 month now.thanks thanks thanks

Qtec 2020 dead after update

Hi everyone,
I've tried to upgrade my PDA from:
ROM version - 2.06.00WWE
Radio - 1.14.00
ExtROM - 2.06.100a
to
ROM version - 2.06.00WWE
Radio - 1.18.00
ExtROM - 2.06.100a
but it went wrong during the erasing proces. The only thing on my grey screen is USB and v1.02. I've tried the setup again but it keeps by zero percent during the erasing proces, followed by error 112. Also I've tried a hard reset but nothings hapens. After the hard reset the screen shows USB and v1.02.
Can someone please help me out.
Many thanks
powerkite
problem solved
I had ot give the device a hard reset (you know styles with on/off button) in combination with the button between both phone buttons. After this run the upgrade again. It will not show information of the device version, only the version you want to upgrade to.
good luck
powerkite
Hello Powerkite!
Hod did you manage to upgrade a Qtek2020 to rom version 2.06. I am lookingall over to do so, but I can't find a good (clean) solution.I am not a programmer or a computer freak therefor I am looking for an easy solution.
thanks
Eddy
Try the following link: http://forum.xda-developers.com/viewtopic.php?t=13588&postdays=0&postorder=asc&start=0

HELP - trashed my xdaII installing wm2k3SE downgrade

Installed a WM2k3SE downgrade from wm2k5 - now I cant activesync to my device (or install any different ROMS), activesync says it is connected, but you cannot open the program up! If you try to upgrade to a different ROM (I have one that I know works), the update program just crashes out! Please help.
I have ROM v 2.02.t1WWE
Radio 1.18.0
Protocol 1337.38
EXTROM 1.12.924 WWE
May have got a bit excited there - installed activesync 4 and it seems OK!

Jamin rom downfall

I tried to upgrade my imate jamin s200 to smart1_wm6_pp8mb. since the operation did not finished I unplugged the usb cable, therefore the machine didn't work and opening now. now some messages are appearing on the screen (IPL:2.15.0001; SPL 2.15.0001; GSM 02.19.21; OS:10.1.0.811)
i need your urgently help... How can i fix it this problem and upgrade my rom again?
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Thank you very much, could you plase upload here i cant find the last update ,
i''m waiting you..
i dont know what is my qtek last update How can i learn it?
When you want to know what ROM you have flashed to your device, go to Start -> Settings -> System -> Device Information! Here you can find all information you need!
By the way: the latest Qtek update for the S200 is 2.20! You can find it trough Gooogle or the board search! Good luck!
animelover said:
Put your Jamin into bootloader mode (camera button hold+softreset with stylus), connect it via USB (not on a hub!!!!) with your PC and try to flash the last update of Qtek, Orange, iMate or something else you like! If your device booting after this correctly you can re-try the flash to WM6!
I switched yesterday many times between Qtek 2.20 Ger, Orange UK, O2 Ger nd smart1's clear WM6 and had no problems during this!
Click to expand...
Click to collapse
Hi animelover,
Just a question...Do you use the OS extract tool to flash only the os without changing the IPL/SPL, or the roms that you wrote about have no IPL/SPL upgrade? I mean did you fash directly or you flashed only the extracted OS?
Thanks!

Categories

Resources