I bought the phone thinking i could fix it... i have tried all the suggestions on resolving white screen... i have attempted to load Schap's cooked rom 4.22 and not luck... the phone powers on, syncs up i can access the files thru windows explorer... it charges... but still just shows the white screen...
Now after multiple attempts at loading the rom, i was able to get the today screen up once, but then it went away...
I have the phone, battery, charger, usb cable and software cd....
Since i can access the files thru explorer... is there anything i can do that way to see if i can get this phone working? maybe some files i can delete or replace...
I have tried the hard reset and soft resets adn nothing helps..
when i try to load the TNT rom when it gets to the part that its going to begin loading, it kills the activesync and then complains that its not connected or has been disconnected...
Anything else i can try?
Read this page, maybe you'll find the necessary help.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
cubangt said:
I bought the phone thinking i could fix it... i have tried all the suggestions on resolving white screen... i have attempted to load Schap's cooked rom 4.22 and not luck... the phone powers on, syncs up i can access the files thru windows explorer... it charges... but still just shows the white screen...
Now after multiple attempts at loading the rom, i was able to get the today screen up once, but then it went away...
I have the phone, battery, charger, usb cable and software cd....
Since i can access the files thru explorer... is there anything i can do that way to see if i can get this phone working? maybe some files i can delete or replace...
I have tried the hard reset and soft resets adn nothing helps..
when i try to load the TNT rom when it gets to the part that its going to begin loading, it kills the activesync and then complains that its not connected or has been disconnected...
Anything else i can try?
Click to expand...
Click to collapse
Two things to try if you've not...
1) Open it up (it's quite rugged!) and check the screen connector is plugged in OK. A lot of white screens are simply loose cables apparently. There is a thread discussing this here. Also Mikechannon is your hardware guru and his website has some excellent information about disassembly/reassembly that should help you out.
2) Try using the application "mymobiler" (freeware) - which allows you to see your hermes screen on your desktop PC when connected over activesync. I've put a mirror of the setup file here until 23/01 as the www.mtux.com site was timing out occasionally while I was looking this up for you (might be my end tho!)
Finally - I don't recommend attempting to flash any more ROMs until the screen issue is updated as you can't see whats going on and there is a risk you could end up with a weirdo hybrid-type brick
Good luck - Hope you get it working and if all else fails (I know you don't want to hear this) but I'm sure some of us here would be interested in slipping you a few quid for spares if the worst came to the worst...
I had almost given up on the phone once i was offered money for it.. i originally took it apart and only checked the connections on the main motherboard.. and that didnt work.. after reading the HTC tech manual and noticing that the LCD also had a cable that connected to a slot and not physically part of the screen i decided to open the LCD casing also.. and sure enough it was the LCD screen cable.. unless you really paid attention you would have never notice.. but i could see a slight angle on the cable connection, it was barely lose on one corner.. i re-seated the connection closed it up and less than 5 minutes the phone was working...
THANK YOU!!!!
I was able to fix a phone i bought for $75 and loaded TNT rom on it lastnight.. and have been customizing it the rest of the night and today...
Funny part is the guy who sold it to me, said it only need to have the ROM reloaded on it..
THANKS again for the suggestions and links... i have saved and booked marked everything..
I guess i spoke to soon... after posting that i was on my way with a nicely used $75 phone. The screen started to fade white....
Using My Mobiler i can see my desktop of the phone.. i can access and do everything... but the screen is white.. and it still functions as far as touch screen, so if guess at where things are i can tap on them and the phone reacts...
So now im back to square 1 with the phone, but atleast this time i know that it is functional software wise just cant see anything..
I opened it up 2 times since it went out and re-verified all connections.. everything has been reseated.. still no improvement.. if im lucky, it will come up to display but once i start tapping around on the screen it will slowly fade out to white...
I have noticed that alot of people have mentioned that after getting the white screen they load another rom on the phone and works for a while then starts to act up again.. can someone tell me how they are loading a rom on a phone with a white screen?
I mean i know the phone works besides the display since i have My Mobiler i can see and do anything i want on the phone.. but thats only good with a active connection thru activesync...
I dont want to try and reload a rom on the phone and mess it up more than it already is..
The screen will display for a few seconds sometimes.. and then fade out to white..
Related
I noticed earlier today my phone kept freezing.
the phone HAS been freezing on me recently, at least once an hour
but now every 3 minutes it freezes or resets itself. I have missed a LOT of calls and ttext messages etc.
today has been a disaster. i havent even synced my numbers and contacts. what should I do?
if you haven't installed anything new or tweaked just before the problem started:
as usual - backup and hard reset...
There is a free program called "pim backup" that will backup all your contacts, messages and call log. Then you can do a hard reset.
my phone freezes before I can even back up anything. its the worst
now it seems like if my phone is plugged in and charging, it gives no problem, but as soon as I unplug it, frozen.
im going to try to find PIM backup to see what that can do
wow now I have a bigger problem now. my phone fell and the transcriber cracked so only part of the screen works with touch BUT that was before I hard reset the phone and now the screen align is appearing but I cant touch all of the targets
is there a way to bypass this?
When its at the align screen you can plug it into computer and connect with active sync. Delete the Welcome shortcut from Windows/startup and soft reset. That should skip the alignment. Sorry to hear about the phone. I have a couple moguls if interested PM me about it.
I am having the same issue he was before he cracked his screen up.
I get freezing whenever the phone goes into standby and it will only restart with 2 hits of the reset button. Also it is a coinflip as to whether it will actually start up fully or just keep soft reseting for an extended period without ever loading up fully.
Anyone have any incite or ideas. I am running a ppckitchen vs of windows mobile 6.5 now. It is a kitchen version with few added programs. However I also experienced something similar to this issue with Titan Reloaded 1.3.4 as well but it stopped so I never bothered looking into it. Now this problem occurs about 10-15 times per day and it is frustrating. I am out of warranty and cant send my phone in because I replaced the housing myself.
Thanks
Dave
Also, I have US Cellular if you need to know that.
Thanks
Dave
I had the same problem kind of. Out of nowhere mine would lockup or freeze randomly. Usually after being in my pocket, after hitting all the buttons or squeezing it, it would work again (sometimes but usually after numerou reboots) but then lockup shortly after or flipping the case open and closed. Finally took the case off my phone and blew inside it today put it back together and havent had a lock up all day (1st time since i started havin the problem). It wasnt rom related as i had the same rom for a while, tried reflashing to different kinds of roms and radios but same random lockups. Somethin musta been loose
Well, I went to take my phone apart, probably the 8th or 9th time that I've done it and I ended up ripping the cable for the screen right off. So no more HTC for me for awhile. Unless of coarse someone wants to mail me a cable for free (im broke in college and my rent is due soon.) By judging by how easily the cable ripped I would bet the crease I found right by the rip had already had a slight tear in it.
Thanks for your help.
Dave
I did search before posting so please forgive me if I've overlooked anything...
So my screen keeps getting stuck sideways. I'll turn it sideways to type on the bigger keyboard, view a site, or view photos, and it will not turn back after. I can shake it like crazy and it sometimes goes back, but not always. It's also quite embarrassing to do this in public... So my solution for now is to go to the home screen, which usually sets it back upright. However this is also quite annoying to keep going back to the home screen.
This is actually my second Eris to do this. It first happened on the stock 1.5 firmware, so I returned the phone and it was replaced. I was told they have never seen this problem, but it happened again, after thirty days. I'm not sure I can return it as I declined insurance. I decided to try the 2.1 leak, and the problem is still there. Now I'm worried about taking it in because I have a leaked rom on it, and don't want to get in any trouble.
Oh, I also tried the G-Sensor calibration tool, but it seems to just switch which way my orientation is stuck. The phone is set to switch automatically when rotating, so that isn't the issue.
Has anyone else experienced this? Any ideas?
Did you try disabling and re-enabling the 'Automatic Screen Orientation' (or whatever it is...)?
I've tried that countless times. Doesn't do anything for me.. I called Verizon and their response was bring it in and they'll replace it. I'm still hesitant to try with a leaked rom though. I guess my only option is to wait for the official update at this point? Thanks for trying to help though.
you should still be covered under manufacturers warranty. EVEN IF THE PHONE GETS BRICKED YOU SHOULD STILL BE COVERED. you can try and do an update to the 2.1 official update and when u go to apply that follow the prompts. when it gets to where it starts installing, you will see what it says"
system - updating
at the bottom it will say "do not turn off phone" MAKE SURE YOU PAY ATTENTION TO THAT. and let it do the update. also when you reboot the phone after that, let it do a normal update BUT DO NOT PULL OUT AND PUT BACK IN THE SD CARD while it is rebooting. that could be bad as well and end up bricking the phone.
Thank you for the instructions. I'll be sure to try this when the official update arrives. Hopefully it doesn't take too much longer..
Edit: I decided to go ahead and take my phone to Verizon to see if I could get it replaced. The guy didn't say anything about 2.1 or didn't notice. They didn't have any in the store, so I'll have to wait 2 to 3 days, then send the old phone back with the package.
Screen orientation stuck ?
This happened to me after jail braking my Eris Driod. Was not sure how to fix it. But I stumbled on to a fix that worked for me. Here it is. In display options using the G-Sensor calibration. I always did this holding my Driod upright on a level surface. It worked just fine. Then I started having problems and no matter how many time I did the calibration – My screen still would get stuck. Then I tried doing the calibration with lying my Driod flat on a level surface and that did it. Not sure why but I really don’t care – it just works. Good luck !
Hi, I have a problem with my T399n.
My phone doesn't turn on, I installed CM12 and it was good, then I flashed the stock ROM from metro again, everything was good about a month, one day I made a call, whatsapp, text and then I put it in my pocket, then when I pulled it out like 10 minutes later and it was rebooting, I didn't pay attention to this because sometimes my phone reboots itself, later It was power off. I pulled the battery, reinserted it and nothing, connected usb cable, nothing, tried to charge it and nothing, Its like my phone died. Looking for a fix, there is the usb jig that work with others galaxy's.
So I just want to know if I'm fried or if there's a last hope to revive this phone with the usb jig
Thanks!
Something similar to this happened to me, would love to know the answer...
just today...
just today, not 2 hours ago at most I was playing around with my galaxy light, deciced to root and mod it.. first step was to, ofc flash a custom recovery... well like most things I pursue I ended up fighting the damn thing for HOURS!! could not get it to register on my computer for the life of me.. now I'm far from a dev and probably one of the least experienced on/around here but something so trivial as lack of drivers, udev, faulty port/cords isn't my forte.. so eventually I whipped out my handy dandy usb jig and .... nothing... *head scratch* hmmm.... now its got my attention... so I get out the multimeter usb data/charging cable and it does show signs of life, easily registering 5.1v / 0.4 mah ... now I'm getting anxious.... so its time for the next test... usb-otg connected to dbl usb-type-A converter to connect to the pooter (it never works but I wish it would ) and nothing there... so otg to my main mobile, reverse it... hmmm seems this lil guy is taking in charge and no data xfer of any kind... since id already rotated various cables I turned my attention to the charging port.. under 6x magnification and too many lumens light I could hardly see any problems but persisted with the 99% isopropyl anyhow... end result "wtf is wrong with this garbage....?) and just as I went to throw it at the wall I spotted my personal "boneyard" where all of my former problematic/faulty devices end up and just in sight was another tmobile galaxy light, broken lcd but logic board intact.. so a quick flip of the wrist and a smack on the back and the 2 became one... fired her up, plugged it in and BAM.. instantly detected... and for some reason I cant quite seem to put my finger on, I had the urge to power it back off and insert my usb jig one final time to see if it infact would work with the galaxy light.... *device in left hand... jib in the right.... bead of sweat steadily sliding down my ruffled brow... time seemed to all but come to a screeching halt as the two came closer until the moment of trust had arrived... the initial contact, the penetration (lol) .. the pause... BOOM factory mode*
so, now that u read that half illiterate rambling from a barely educated redneck shut-in to determine if the usb jig works with galaxy light or not .. the answer is yes... it does unless its a piece of crap like one of the 2 I own is...
KatharsisSoul said:
Hi, I have a problem with my T399n.
My phone doesn't turn on, I installed CM12 and it was good, then I flashed the stock ROM from metro again, everything was good about a month, one day I made a call, whatsapp, text and then I put it in my pocket, then when I pulled it out like 10 minutes later and it was rebooting, I didn't pay attention to this because sometimes my phone reboots itself, later It was power off. I pulled the battery, reinserted it and nothing, connected usb cable, nothing, tried to charge it and nothing, Its like my phone died. Looking for a fix, there is the usb jig that work with others galaxy's.
So I just want to know if I'm fried or if there's a last hope to revive this phone with the usb jig
Thanks!
Click to expand...
Click to collapse
It does in fact work. If asking about the USB mount, from my knowledge you would've had to already installed them by turning the function on like I did in the first screen shot.
If you need them I can link them to my drive or mega. Whichever is best. Think I have drop box still too.
And yes. I have bricked this phone I'm using now for a solid 3 days when I first started with it. However cm12 has bugs, after the second time it rebooted and bricked on me I went back to Tigerlily I even had no SIM error but somehow fixed that when flashed back to stock. Cm12 caused me to flash back to stock about 3 times a day. Too much headache. Guess thats why we are not supposed to do this to our primary phones. on tigerlily ive Had a little trouble keeping super su in his place too, Got home last night and POOF, just gone for no known reason. finally got him to stick by installing him into the system with lucky patcher. Flashify, flashfire, and even rom installer all failed to keep him there. . I have also stripped down almost every file just for fun to see what other fine items I could damage, Finally found where they hide the dialer codes for the phone. They are not in any files that i have spent the last for years looking in. The codes are inside of the APK. The last place I decided to look. Everything I know is self taught and just recently started working with apps for windows 10 and merging android files into windows apps.
Now , I'm actually quite impressed with it's capabilities .
Really what's helped me dial everything in was the helped of an app called Mixplorer with all the ad-on's all of which are free.
Good luck with your brick. Myself, I have 3 other phones I'm currently working on unbricking. One of which is a hard bricked LG motion. Flashed th err wrong firmware to it a year ago. Just this week got the cup to recognize it. the code to get into the first service menu pictured here on the bottom left is *#0808#
Really what's helped me dial everything in was the helped of an app called Mixplorer with all the ad-on's all of which are free.
Good luck with your brick. Myself, I have 3 other phones I'm currently working on unbricking. One of which is a hard bricked LG motion. Flashed th err wrong firmware to it a year ago. Just this week got the cup to recognize it.
when youre ready to really see whats going on you can dial *#9900# for all the System Dump features.
Ok long story short, i threw my phone at the wall and now it wont turn on. Im not too bothered about the phone, ive had it a while and want a new one anyway, however upon removing the micro sd i discovered that all my pics and vids from the last few years are stored on the phone.
As i cant power it on (i get a constant red led if i connect it to anything) i cant see it on the pc to pull data off, anyone have any suggestions for me to get them pics and videos?
I've took it apart but cant see anything obvious to repair, all i can think of now is putting my motherboard into a working z2
The LED is not meant to stay constantly on when connecting the device to something whilst off. It is supposed to go off after a few seconds. That doesn't sound good.
Have you checked to see if you can boot into fastboot mode, or even flash mode? May not help in this case, but if that functionality is working then the device is not dead just yet.
Also, make sure all needed drivers are installed on your computer. The device will not be picked up properly without them. Install them manually if not.
If you can place the motherboard into a working Z2, which will eliminate many potential areas of failure provided it starts working, then that is the only way you can retrieve your data.
It's impossible to retrieve data stored on built-in storage on a dead device, so what you are asking has no straightforward answer.
Next time, please throw significantly cheaper items at walls, and not modern, uncommon smartphones.
last bit is brilliant advice, problem with that is automated services annoy me and the phone is in my hand already when i gotta put up with them lol
I cant get it to power on at all, not fastboot, flash mode nothing.
I know putting the mainboard into a working z2 might not work but i figure thats my best chance, i think it can be done with jtag tools, but not willing to spend a few hundred quid for something ill probably never use again..... I've also seen some eMMC readers available, but as that involves removing the eMMC chip from mainboard id be even more stuck if it didnt work
Now i got myself a P9000 Helio arround 2 months ago, and since then i noticed some wierd stuff, and was wondering if anyone knows how to fix/whats going on.
Charging
After i plug it in any charger, after a few it shows the Elephone logo and does something that looks like a reboot, but its not a reboot, after it doesnt ask for PIN it just back at lockscreen.
This is quite annoying when you use it in your car, for speedtraps/music apps ect, it all shuts down, and it doesnt only do this once, does it more than 1 time, while pluged into the charger.
Both on wireless chargepad and cable charge.
Anyone know how to fix/remove this ?
Reinventing the wheel
For some really odd reason i noticed the messenger app, and the call app, aint the ones from Google, even tho they share the same icon and allmost the same setup, only reason i noticed it was due to the circle in rightside bot, wasnt there, where you make a new SMS.
So i started looking into it and then allso saw the call app was differnt.
Anyone know the reason to this?
Screenprotector
Yes everyone knows about this one, the original that comes with phone, is liftet in the edges by the allso original silicone cover, and quite quickly it looks like crap, doesnt stick in many places.
So i ordered a new one, unoriginal, and to my suprice, it was that tiny ince smaller than the original, and didnt get lifted , well my happyness was shortlived cuz after a few weeks, it allso choose not to stick arround the side where the volumerocker is
Does there exist a screenprotecter that can actualy stick to this phone ?
Silicone Cover
Well im not 100% sure about this one, but sometimes i find my phone turned all the way down to vibrate only, and not having use it, i suspect the silicone cover to be the suspect but im not quite sure.
Connecting it to Win10
The struggle, when i first plug it in, i can see and access it while it look for drivers, when it find the drivers, i can no longer access the phone or the SD card on the phone
Tried allmost all fixes, still no luck
Fingerprint Scanner
Anyone got it to work, ive simply gave up on it, and hated it vibrating everytime it reached into my pocket and scraped the scanner.
Overall im happy with the phone, but i dont quite understand why they have to try to reinvent it, its a cheap nice chineses phone, it doesnt need all the apps like Samsung and the other makes have, you cant get rid of, so im quite puzzled why they even bother, and not just use a base Cryo Mod
Hello.
For the reboot while charging problem, try this (copy pasted from another forum)
"try to disable the optiion -automatically backup- in setting, i think it could be the solution"
Btw, are you on the stock ROM?
Nate91 said:
Hello.
For the reboot while charging problem, try this (copy pasted from another forum)
"try to disable the optiion -automatically backup- in setting, i think it could be the solution"
Btw, are you on the stock ROM?
Click to expand...
Click to collapse
Hey, and thanks for that advice, i will try that and see if it removed that
Yes i am still on stock ROM for the moment, only reason i didnt update it to 7.0 was due to them rolling out 7.0 this month they saied, and the fact than i still cant get it to communicate with my Win10
The vibrate setting is due to pushing the button on the left side in for a while. To revert back to full volume you need to push it in again. It sometimes does it automatically with the silicone cover on.