hi i need help ive been using my atom life almst 2 mnths nw.. i have upgrded to wm6 and nw my send and end button wont light and funcntion. wat shld i do
gotan said:
hi i need help ive been using my atom life almst 2 mnths nw.. i have upgrded to wm6 and nw my send and end button wont light and funcntion. wat shld i do
Click to expand...
Click to collapse
almost 2 months.. Hmm.. just bring it to O2 service maybe just kidding lol
What ROM do you use? is it the official from O2? What about other buttons? Is it works? (e.a. camera buttons, etc)
rep
hi the UP,DOWN,LEFT,RIGHT, and center button also doesnt work.
May due to the connector is loose, have to open the casing to check ... if not , is faulty.
gotan said:
hi the UP,DOWN,LEFT,RIGHT, and center button also doesnt work.
Click to expand...
Click to collapse
Well then, the only suggestion I can say is, bring it to O2 Service Center, Don't forget the warranty card..
Actually I had the same problem after I installed one of the touchpad keyboard, I can't really remember which touch keyboard, but I suspect it was the HTC one with the xt9 settings caused them to not work, even the camera and voicedial button was not working.
Uninstalling did not help, so the solution I found was to do a hard reset and just not installing that program, works great now
Related
hi, just wanna know if there is any malaysians in here who have upgraded thier xda2 to the wm2003se? thinking of upgrading, but just need some guidance from someone with experience.
Thanks
duxz said:
hi, just wanna know if there is any malaysians in here who have upgraded thier xda2 to the wm2003se? thinking of upgrading, but just need some guidance from someone with experience.
Thanks
Click to expand...
Click to collapse
Just go and read all the postings on the thread Genuine English WM2003 SE Upgrade....
duxz said:
hi, just wanna know if there is any malaysians in here who have upgraded thier xda2 to the wm2003se? thinking of upgrading, but just need some guidance from someone with experience.
Thanks
Click to expand...
Click to collapse
I've upgraded and no issues ... so far (keeping my fingers crossed) .. :roll:
V2.06
on Maxis GSM
alvinlim28 said:
I've upgraded and no issues ... so far (keeping my fingers crossed) .. :roll:
V2.06
on Maxis GSM
Click to expand...
Click to collapse
Hi there,
Pls have a look here http://forum.xda-developers.com/viewtopic.php?t=13697
I guess this is the price to pay for.....
Alvin & wm2003,
Thanks for your feedback on this matter and also the link for the warranty. Really appreciate it. Now for the hardest and the stupidious question.... how do i upgrade it/ install it? :wink:
ok.... i have upgraded to the wm2003se version but i just notice upon installation on my xda... there is alot of pop up window stating that 'this program might.....' so i ignored all the pop ups and continue... it manage to work still... so far so good. Can someone tell me wat i just did wrong? wat i did was just double click on the HimaupgradeUT and let it install by its own..... not sure wats the rest of the files are for... .nbf, himaclearjumpcode, himadatedevice is all about. Enlighthen me pls...
Thanks in advance .... cheers :lol:
duxz said:
ok.... i have upgraded to the wm2003se version but i just notice upon installation on my xda... there is alot of pop up window stating that 'this program might.....' so i ignored all the pop ups and continue... it manage to work still... so far so good. Can someone tell me wat i just did wrong? wat i did was just double click on the HimaupgradeUT and let it install by its own..... not sure wats the rest of the files are for... .nbf, himaclearjumpcode, himadatedevice is all about. Enlighthen me pls...
Thanks in advance .... cheers :lol:
Click to expand...
Click to collapse
Duxz, no worries. Most of the software were writen prior to SE, so it's just a warning. Of course some of the software doesn't run well on SE. I have a friend on the IIs and it doesn't run Battery Pro 1.1 well (makes his IIs unstable). For me it works fine ... no prob (still keeping my fingers crossed).
hey alvin, guess wat.... i think i screwed my whole xda up big time this time round...lol. Sending it over to the service center in sunway in da morning for them to load it up with the original rom... but will try to install the wm2003se again once i get it back... :twisted:
i think the service center is gonna see me pretty often.... muahahahaha.
ok malaysian xda2 users..... i just got my unit back from the service center in sunway, PJ. Things are ok now... back to the stock rom. Those guys there are pretty professional in wat they are doing... and bad statements said about o2 centers are not tat true after all.
For those who wanna fool around with the roms till it get screwed, have fun with it coz it only cost RM35 to get it back running again
duxz said:
ok malaysian xda2 users..... i just got my unit back from the service center in sunway, PJ. Things are ok now... back to the stock rom. Those guys there are pretty professional in wat they are doing... and bad statements said about o2 centers are not tat true after all.
For those who wanna fool around with the roms till it get screwed, have fun with it coz it only cost RM35 to get it back running again
Click to expand...
Click to collapse
Hi Duxz, I'm not sure how you could screw your XDAII dead, because there was 1 time my XDA II got disconected in the middle of an upgrade, but I managed to salvage it using the procedure highlighted in this tread ... my advise .. save the RM35.
http://forum.xda-developers.com/viewtopic.php?t=13651
I just upgraded my O2 XDA II to WM2003 SE using XdA2JoJo.v3.2zS.exe. Also changed the AutoConfig and add in the thing for Maxis. So far so good.
I give up with the WM2003 SE. Just revert back to the original one. Basically the XdA2JoJo.v3.2zS.exe just a bit too slow...
duxz, i'm having the same experience as you are. bring my xdaii to SC at Berjaya Times Square to flash the rom with ori OS. what an experience huh. i feel very cold that time, so as my xdaii. now my xda back to normal and i dont want to try that anymore, since i dont hv fren using the same device. now i couldnt get my cradle to work as usual. at first, no problem. can do sync and charge with cradle, but now, only charging, cannot sync. my windows cannot recognise the cradle anymore. try to update driver but fail. now i sync with IR. i want to use my xdaii as usb modem now but must get the cradle to work first. found forum on modifying the pin, and still afraid on doing any mod. is it because of the pin on my cradle is shorted or is it because my usb is not 2.0?
HAHA, I reflash it back by myself. But then, now I got use to flashing the OS, I'm testing the various WM2003 SE now...
hi everyone, i suggest to whoever who wants to play around with their device, read the post carefully. because what ever you are trying to do, i'm confident someone out there has already done it.
i flashed my device recently.. thank god its ok.
cheers
can you tell us how did you do that reflashing? others (at other forum) need 2 devices, put on cradle the ok one till update program asking to start the update process, then swap with dead one. yet to find friend with xdaii at the moment
maybe you could borrow eric's xda. ehehe
I downloaded this from O2 official website sometime ago. This will flash your O2 back to the O2 Official OS.
I'm now using WM2003 SE with XdA2JoJo.v3.2zS.exe. So far so good, except that I have some issue with the Bluetooth Handfree.
guys i would like to know after the upgrade of ur xda2 to windows SE can it detect spectec sd wifi????
well... some days ago my touch screen started to tilt.... some times it works, some times it don't...
my cel is an HTC Touch Dual Niki100...
i instaled another roms to correct the problem, but now it don't work anymore... =/
any ideas ???
it might be hardware problem, doesn't it ??
=/ i'm scary about having to change my screen... =/
DarkWz said:
well... some days ago my touch screen started to tilt.... some times it works, some times it don't...
my cel is an HTC Touch Dual Niki100...
i instaled another roms to correct the problem, but now it don't work anymore... =/
any ideas ???
it might be hardware problem, doesn't it ??
=/ i'm scary about having to change my screen... =/
Click to expand...
Click to collapse
I'm afraid it is a hardware problem, it happens to me a couple of days ago, the only solution is to change the motherboard.
Succes,
gee...
that's it then.... i'll see where i can find a tecnical support to do it for me =/
thx for the answer! ^^
Rataplan said:
I'm afraid it is a hardware problem, it happens to me a couple of days ago, the only solution is to change the motherboard.
Succes,
Click to expand...
Click to collapse
Where do you buy these spares rataplan?
DT
d_train said:
Where do you buy these spares rataplan?
DT
Click to expand...
Click to collapse
Hi, that's just the biggest problem, because the imei number is in the motherboard they simply don't sell them, so I bought a second hand phone with a broken screen and made one phone out of two.
Regards
DarkWz said:
that's it then.... i'll see where i can find a tecnical support to do it for me =/
thx for the answer! ^^
Click to expand...
Click to collapse
Here http://www.mikechannon.net/
touch problem
jest jakaś wersja softu bez kalibracji wstępnej ekranu dotykowego? dzienks
hii
i`v got the same problem still unsolved help and i think its a software thing because when u do the alignment screen thing it comes back to normal!
wolero36 said:
jest jakaś wersja softu bez kalibracji wstępnej ekranu dotykowego? dzienks
Click to expand...
Click to collapse
Plse use English, my Polish is really bad , It is possible to pass the bootscreen without calibration but I'm not sure you can find a rom who don't use it.
Sukces
kauazake said:
i`v got the same problem still unsolved help and i think its a software thing because when u do the alignment screen thing it comes back to normal!
Click to expand...
Click to collapse
Can you tell me more about the rom you are using.
It might not bee the mothelboard. Had this problem for a few months until my screen just went black one day!
Had to change the screen cable. It's a design flaw, each time you open the phone the cable gets scratched and soon the wires get clipped. I bought a new niki100 flex cable on ebay and open the phone and replaced it and put a small extra tape over the cable to be sure it would happen again...
problem
there is some version of software without the preliminary calibration of the touch screen of some time I hit on so... perhaps somebody will give bearings... thanks
placing a file name welcome.not on sdcard should bypass the welcome thing
hi, i'm new her.
but i had this problem to.
i bought an touch screen on dealextreme.com
it works great!
sorry for my bad english.
So, as the title says hardware problem and there are few things I want to know about. Have anyone got the problem about power button position on the inside is lower than the volume buttons? My bro and me got the same XU and never have problem except this one. My Xperia U has the lowest power button than my brother. If that's my phone's factory fault, can I repair it by disassemble it and settling the buttons back? I got no problem but I have to press hard for power button and there are no pressable home button to wake my device up. My problem is normal or not? Please answer me dear bros. Thanks.
Sent from my ST25i using Tapatalk 2
If you have a guarantee, I'd recommend you take it to the store since its a factory problem. If you don't have a guarantee, there's some apps which let you use the volume buttons to turn the screen on. I don't know the names since I've never used one but I've seen it in here so you can use the search bar to look for them
carlaba2 said:
If you have a guarantee, I'd recommend you take it to the store since its a factory problem. If you don't have a guarantee, there's some apps which let you use the volume buttons to turn the screen on. I don't know the names since I've never used one but I've seen it in here so you can use the search bar to look for them
Click to expand...
Click to collapse
Finally some dearest bro answer my question. Thanks for your answer bro. Since nobody answers my question. Thanks
Sent from my ST25i using Tapatalk 2
You're welcome! Let me know how it goes
BTW, if you do have a guarantee, take your brother's phone too so you can show them there's a difference
carlaba2 said:
You're welcome! Let me know how it goes
BTW, if you do have a guarantee, take your brother's phone too so you can show them there's a difference
Click to expand...
Click to collapse
They told me to wait for changing my handset dear bro. I'm waiting. Everything's went so bad. They told me that it wouldn't gets so wrong. But it's definitely sure that I have very stupid power button. You're right bro. I should have brought my brother handset, too. Now I'm in anxiety because it's only one week old. Now, I press so hard the power button and it annoys me. Anyway, I thank you so much for helping me out. Now I'll have to wait for answer.
Sent from my ST25i using Tapatalk 2
My sk17i touch screen stops working once i flip the hw keyboard..but the keys are working .i av to reboot evertym to get touchscreen working again.. i think its a hardware bug since i tried changing kernel and rom...nybdy experienced similar problem ..any hope:crying:
; after few more flips the touch is totally gone.. nw i av no touch functionality whthr fliped or non fliped.....so i think it is safe to keep the phone off until repaired...
The ribbon/cable/wire that connected mainboard with keyboard is broken. U need to repair it.
Happen almost everytime with any phone with slide, dumbphone or smartphone.
suael said:
My sk17i touch screen stops working once i flip the hw keyboard..but the keys are working .i av to reboot evertym to get touchscreen working again.. i think its a hardware bug since i tried changing kernel and rom...nybdy experienced similar problem ..any hope:crying:
Click to expand...
Click to collapse
nope.ribon problem.
an0nym0us_ said:
The ribbon/cable/wire that connected mainboard with keyboard is broken. U need to repair it.
Happen almost everytime with any phone with slide, dumbphone or smartphone.
Click to expand...
Click to collapse
after few more flips the touch is totally gone.. nw i av no touch functionality whthr fliped or non fliped...is it same problem u mentioned ?..so i think it is safe to keep the phone off until repaired...
I got same problem...chang flex cable dats d oly problem
mihirc08 said:
I got same problem...chang flex cable dats d oly problem
Click to expand...
Click to collapse
did u replace the flex cable?how much will it cost?
if u go officially u'll cost 1800Rs for original part plus some service tax..
or else u'll cost 1200Rs for duplicate part
better u go with original
mihirc08 said:
if u go officially u'll cost 1800Rs for original part plus some service tax..
or else u'll cost 1200Rs for duplicate part
better u go with original
Click to expand...
Click to collapse
flex cable repair is available in near by shop..1000rs for duplicate and rs2000 for original...i think even sony put second quality parts on our phone.. i decided to go with duplicate
Hi, I am Minori ^ _ ^
I have a Nexus 5 and volume down button is stuck/broken. Whenever I turn on my phone, it goes to Safe Mode because it thinks I am pressing power and volume down button all the time. I was wondering if anybody knows a way I can disable safe mode/secure boot so my phone can start in normal mode? The only solution I have found so far is so take it to get repaired however it costs too much to do so. If anybody has any brilliant ideas I would love to know :victory::victory::victory: and please excuse my poor English
Minori1996 said:
Hi, I am Minori ^ _ ^
I have a Nexus 5 and volume down button is stuck/broken. Whenever I turn on my phone, it goes to Safe Mode because it thinks I am pressing power and volume down button all the time. I was wondering if anybody knows a way I can disable safe mode/secure boot so my phone can start in normal mode? The only solution I have found so far is so take it to get repaired however it costs too much to do so. If anybody has any brilliant ideas I would love to know :victory::victory::victory: and please excuse my poor English
Click to expand...
Click to collapse
if ur volume down button is broken.. wether its causing any prb while the phone is switched on?? like it is being auto pressed ..
ve u rooted and installed xposed?? which version android r u using??
give me details ill do my best... if u r rooted the better way is to remap keys..
Romeotamizh said:
if ur volume down button is broken.. wether its causing any prb while the phone is switched on?? like it is being auto pressed ..
ve u rooted and installed xposed?? which version android r u using??
give me details ill do my best... if u r rooted the better way is to remap keys..
Click to expand...
Click to collapse
Thanks for offering your help Romeotamizh! unfortunately i got a bit impatient and tried open the phone to see what the problem was and my motherboard exploded. Time to buy a new phone.
Thank you for offering to help!
K cool good luck for ur next mobile what u gonna buy
Minori1996 said:
Thanks for offering your help Romeotamizh! unfortunately i got a bit impatient and tried open the phone to see what the problem was and my motherboard exploded. Time to buy a new phone.
Thank you for offering to help!
Click to expand...
Click to collapse
Np btw:cyclops:
Closethe thread