Titan Radio ROM 3.27.00
NOTE 6/19/08:
There is absolutely no reason for anyone to be using this radio anymore. If you are looking to upgrade from 1.x radios, please use 3.35 or later.
DOWNGRADING TO THIS RADIO FROM 3.35 OR ABOVE WILL BRICK YOUR DEVICE.
This radio enables GPS and EvDO rev A.
DOWNLOAD:
REMOVED
how do we get bootloader 2? or even know that i have it? hopefully this will fix how when ever i hand up i loose singal for a few seconds and it seems i go in and out a lot when i should have good signal.
That's 2.04
thanks...ill try and wait...oh i hate waiting
can anyone post a link that is non rapidshare to the loader we need? thanks alot.
friguy33 said:
whats 2.04?
Click to expand...
Click to collapse
the bootloader. its what comes with the newest rom.
the rom is not released so unless you snaged it from here tonight you wont have it.
I was reading instructions by IMCOKEMAN - does anyone know if we can keep the 1.20 Olipro and do these instructions?
EDIT by ImCoKeMaN:
I have found that if you have issues where your device seems to be bricked and stuck in bootloader before completion of the update you can fix it by flashing via SD card.
To do this there are 3 steps:
First take the .exe file and open it with winrar. There will be a file 3.16.....nbh extract that and rename it to TITAIMG.nbh
Next format a microSD card with FAT 32 (required most are fat16 default) and copy the file TITAIMG.nbh to the root of the sd card with a card reader.
Finally place sdcard in device and reset into bootloader mode. The flash will proceed from the SD card and it should work fine. Enjoy!
Works on Telus. Had to recover from SD Card. GPS WORKS!!!!!!!!!
Telus P4000 Running Boot Load 2.40 Olipro, Radio Rom 3.27 and OS 3.16 SPRINT.
Can't wait for the Kitchen!!!!
Aximus, where did you get 2.40 olipro?
aXiMus said:
Works on Telus. Had to recover from SD Card. GPS WORKS!!!!!!!!!
Telus P4000 Running Boot Load 2.40 Olipro, Radio Rom 3.27 and OS 3.16 SPRINT.
Can't wait for the Kitchen!!!!
Click to expand...
Click to collapse
http://forum.ppcgeeks.com/showthread.php?p=168746#post168746
Here is the link your looking for.
having trouble installing the titan radio 3.27.00
when i run the file and my phone starts to update it malfunctions.......my usb port seems to disconnect on its own but physically its still connected.... can u help me??
it might just be me, but it seems that this radio doesnt work correctly with vzw text messages or mms. i am able to recieve sms but cant send, and can send mms but not recieve.
elgreek84 said:
Aximus, where did you get 2.40 olipro?
Click to expand...
Click to collapse
I got from a file called 3.16_GPS_rom__and_patched_2.05spl. I think it was ppc geeks, I am running the sprint rom on my Telus phone. Going to go back to 2.17 and Radio 2.06 seems to work better. Besides don't need GPS on my phone at this time, as I have in dash GPS.
anyone able to get MMS working on verizon? or just data in general to work on verizon?
friguy33 said:
anyone able to get MMS working on verizon? or just data in general to work on verizon?
Click to expand...
Click to collapse
Data works fine. I'll get back to you on the MMS in about 5 minutes.
MMS works fine.
DO we have to RELOCK?
I read many many posts yesterday about having to RElock the phone.
Do We need to do this before running the new Bootloader, then radio, then rom?
sudermatt said:
I read many many posts yesterday about having to RElock the phone.
Do We need to do this before running the new Bootloader, then radio, then rom?
Click to expand...
Click to collapse
I didn't. I flashed the new unlocker straight from the 1.4, then radio and then the new ROM.
so will this pretty much allow you to have gps and rev a with any rom of your choice? or do you still need to use the new roms?
hay112 said:
so will this pretty much allow you to have gps and rev a with any rom of your choice? or do you still need to use the new roms?
Click to expand...
Click to collapse
I also am curious of this as i miss having my cooked dcd rom kitchen, either way im sure a new kitchen will be released anyways, and gps is pretty neat
Related
This the Alltel 3.35.671.9 ROM with GPS enabled (it is not enabled in the OEM ROM). Enabling GPS is the only difference this will make to your phone. This is OS-only so you will need to flash the OEM ROM first.
Download GPS-enabled Alltel ROM
1. Flash the original Alltel 3.35.671.9 ROM.
2. Connect to PC and copy TITAIMG.nbh from my ROM to a MicroSD and remove it from the phone. Or alternatively, use WinRAR to extract all the files from the original .exe file from step 1 and replace RUU_Signed.nbh with my TITAIMG.nbh file.
3. Install Hard-SPL 2.40 from Olipro Link
6. Reinsert MicroSD and hit RESET. TITAIMG.nbh will install. If it does not, hold POWER+CAMERA while pressing RESET, you will briefly see the tri-colored bootloader screen and it should load the ROM. Or if you extracted the RUU from the original .exe file, just run RomUpdateUtility.exe.
GnatGoSplat said:
Someone on PPCGeeks requested an Alltel version of the GPS ROM with all the original apps (Office Mobile specifically) intact so here's my contribution. I figured I'd go ahead and post here since PPCGeeks is down right now.
http://rapidshare.com/files/87429906/Alltel_3.16.615.0_Titan.rar
The only change is I stripped Sprint stuff out, added Alltel stuff in. No other changes whatsoever. It will fix your splash screens and extended ROM back to Alltel if you flashed the official leaked Sprint firmware.
There is no IPL/SPL or radio in this ROM. You must first flash the 3.27 radio and Olipro Hard-SPL 2.40 first. Then copy TITAIMG.nbh to a FAT32 formatted MicroSD. Put the MicroSD in the phone and press POWER+CAMERA while pressing RESET to get into the bootloader. It will begin flashing automatically. No RUU is included because I couldn't get the RUU to work with Hard-SPL 2.40. However, maybe my old USB 1.1 laptop is the cause. If you'd prefer to try an RUU, just rename the file to RUU_signed.nbh.
Click to expand...
Click to collapse
the ruu works fine for me with spl 2.40, and you dont have to rename it at all, as long as there is only one .nbh file in your ruu folder.
THANKS!
Wish Me Luck!
THANK YOU!!! Downloading now.
Booo!
bushido1 said:
Wish Me Luck!
Click to expand...
Click to collapse
ppcgeeks is having technical difficulties. I can't get radio 3.27. Maybe tomorrow. I was so pumped for this.
ftp://up.ppcgeeks.com/
user: ppcgeeks
pass: ezupload
then /titan/users/angel12
the radio is in there. and soon my alltel rom
fallingup said:
the ruu works fine for me with spl 2.40, and you dont have to rename it at all, as long as there is only one .nbh file in your ruu folder.
Click to expand...
Click to collapse
I never could get the Alltel WM6 RUU to work with SPL 2.40, nor the one that came with the Sprint leaked FW, nor one I downloaded from your FTP. They always cause the phone to reset at 1% and I get "ILLEGAL COMMAND" on the RUU. They all worked just fine with the old Hard-SPL 1.20 and also the 1.06 in the relocker. Weird. My laptop won't ActiveSync with any of my devices unless I turn off "Advanced network connectivity" in the control panel either, so it must be my old Thinkpad laptop. It's a P-III antique.
At any rate, flashing this ROM will be even easier for those who can use an RUU.
I don't know if anyone is interested, but I've updated this ROM for 3.35.651.2.
Nevermind.
Updated for 3.35.671.9.
guys, i downloaded the new Alltel ROM yesterday. As stated, still wm6 but with RevA capability. I'm new to this stuff, but it looks like the above alltel ROM just gives the new stock ROM GPS capability. Is that correct?
Yes, it is a permanent way to get GPS capability with the stock ROM.
I theorize the necessary changes can be made into a simple cab file so you don't need to flash the ROM unless you want the GPS enabled permanently. I plan to make a cab later today as some people want to try it out.
yeah that would be cool.i have the new Alltel Radio, and i'm running DCD 3.0.1. the reason i went with 3.0.1 was i thought it enabled GPS. Now that i've got my device up and running, i see it does not.
DCD3.01 does infact have working GPS my friend.....
could be, if that's true my alltel engineer friends doesn't know about it. He told me GPS would not be enabled on the 6800 with Alltel. He even runs DCD, he can get it with a Sprint Radio, but not with the Alltel radio. again, that's just what he told me.
What he meant to say was that the ALLtel update does NOT include the drivers (3 of them) in the operating system thereby not enabling it, but the radio itself will allow GPS to work.... I'm flashing it right now, be back in a bit.... If you flash a DCD 3.0.x ROM you will have GPS drivers.....
gotcha. i'm not doubting you..just wasn't sure of that.
i have dcd3.0.1 for alltel. 3.0.4 was taken down. I didn't think the radio was going to allow it..that's why a few friends i have are using the sprint radio. I'm a techy, but not in this world, so i'm learning...
jshaas2 said:
gotcha. i'm not doubting you..just wasn't sure of that.
i have dcd3.0.1 for alltel. 3.0.4 was taken down. I didn't think the radio was going to allow it..that's why a few friends i have are using the sprint radio. I'm a techy, but not in this world, so i'm learning...
Click to expand...
Click to collapse
3.0.4 rom was never put up for alltel, thus never taken down
GPS does work with the alltel 3.37.20 radio and any dcd 3.x.x, on any carrier.
Is there any real improvements to this radio or is it just a higher number? Thus intreguing people.
azclown said:
...the ALLtel update does NOT include the drivers (3 of them) in the operating system thereby not enabling it, but the radio itself will allow GPS to work....
Click to expand...
Click to collapse
If it is only three drivers, couldn't we just nab them from a GPS enabled ROM and manually copy them to the proper folders?
Ok, I am going to get flamed I am sure... but I was trying to update to the 3.39 radio on my Tytan earlier today. I previously had the 3.35 radio and DCD's 3.12 ROM on there (using olipro2.40). I followed the directions on the forums best I could, and reflashed from 2.40 to 1.20 in the olipro. Now it is just stuck there. I cant reflash it to 2.4 or anything? Also everyone keeps talking about the RUU for the radio to flash it, but I have searched for two hours and cannot find a simple post about where I am supposed to find this program. Just a billion mentions of the RUU folder... which doesnt help me at all.
I just went ahead and reloaded the dcd 3.12 rom using olipro 1.20 and it looks to be booting, but this still doesnt help me with the radio issue... ( the SD card option will not work for me either.) Thanks for any help
Gaigebacca said:
Ok, I am going to get flamed I am sure... but I was trying to update to the 3.39 radio on my Tytan earlier today. I previously had the 3.35 radio and DCD's 3.12 ROM on there (using olipro2.40). I followed the directions on the forums best I could, and reflashed from 2.40 to 1.20 in the olipro. Now it is just stuck there. I cant reflash it to 2.4 or anything? Also everyone keeps talking about the RUU for the radio to flash it, but I have searched for two hours and cannot find a simple post about where I am supposed to find this program. Just a billion mentions of the RUU folder... which doesnt help me at all.
I just went ahead and reloaded the dcd 3.12 rom using olipro 1.20 and it looks to be booting, but this still doesnt help me with the radio issue... ( the SD card option will not work for me either.) Thanks for any help
Click to expand...
Click to collapse
RUU stands for Rom Update Utility. I have heard that flashing a radio ROM using a RUU with Olipro 2.4 is problematic. The SD card method is much better and easier. Can you get into bootloader? (power/camera/reset)
...
I have been able to get back to everything the way I had it before (as far as ROM and olipro version) and I can get into bootloader, but I dont have a compatible sd card.
Gaigebacca said:
I have been able to get back to everything the way I had it before (as far as ROM and olipro version) and I can get into bootloader, but I dont have a compatible sd card.
Click to expand...
Click to collapse
If its up and running as before I would buy/borrow a SD card and update your radio that way. Why can't you use the SD card method?
Ooops...just saw that you don't have a compatible card. The microSD card in your phone will work fine if its not SDHC.
I dont have a card reader or access to one in order to format the card and put the file in the root.
Gaigebacca said:
I dont have a card reader or access to one in order to format the card and put the file in the root.
Click to expand...
Click to collapse
Sorry I don't have another idea...I wouldn't attempt any further radio mods until you can get a SD card with the radio ROM on it. Too risky you might muck up your phone and at least now its working. If I remember correctly its the newest 3.x radios that were causing problems when being flashed with a RUU on Olipro 2.4. Perhaps one of the senior members has an idea.
Hey all,
Been trying just about everything to help a buddy out, but I've been failing repeatedly.
He got a brand new phone yesterday and found the XDA Titan Wiki to install the GPS enabled ROMs. He loaded SPL 2.4, then installed DCD 3.2.0. It got stuck at the Verizon screen when it restarted...then he apparently downloaded the Radio 3.42.30 to try and install that to get out of it (maybe thinking the Radio needed to be installed for it to get through). Now he's stuck at the White Verizon screen, and it says "No Radio".
Sounds like from when I read the Wiki he was supposed to install an intermediary Rom before jumping all the way to 3.2.0.
I've suggested using the Olipro SPL 1.2 unlocker, the Titan Relocker, several different ROM's and am at a loss as to how to fix it. He's still stuck at the Verizon screen displaying "No Radio."
Any suggestions?
Thanks
I went from stock to 3.2.0 / Radio 3.42.02.. no problems.
I have not loaded 2.42.30 (I prefer to use the radio version released by HTC for this device.. 3.42.30 was released for another device and ported.. although it seems to work for everyone.)
I HAVE read that for radio 3.42.30 you need SPL 1.20 for USB Flashing.
gc14 said:
Yeah 1.20 is needed to flash these radios via USB. Just need to put 2.40 back when you're done.
Click to expand...
Click to collapse
Based on that.. I assume SD flashing is ok with 2.40.
scotcha12345 said:
... (maybe thinking the Radio needed to be installed for it to get through)....
Click to expand...
Click to collapse
Yes! This is well documented.. a common issue.
If you flash the Rom without a compatible radio.. you will get stuck on the verizon screen... I suggest flashing the ROM AFTER the radio.. since you flashed the Rom already... when you get the radio working, Reflash the ROM.
Did you flash the radio via SD Card or USB?
Did it show a progress bar while flashing?
Let us know how your attempting to flash the Radio (USB or SD) With specific steps (held buttons X, Y, and Z.. saw this message, pressed this key.. saw this on the screen) .. and someone will let you know what you might be doing wrong.
Also.. dont forget to run the carrier cab when your done.. This is worth mentioning since it's the most common issue once the device boots and you cant program the phone, or make data / voice connections.
scotcha12345 said:
Hey all,
Been trying just about everything to help a buddy out, but I've been failing repeatedly.
He got a brand new phone yesterday and found the XDA Titan Wiki to install the GPS enabled ROMs. He loaded SPL 2.4, then installed DCD 3.2.0. It got stuck at the Verizon screen when it restarted...then he apparently downloaded the Radio 3.42.30 to try and install that to get out of it (maybe thinking the Radio needed to be installed for it to get through). Now he's stuck at the White Verizon screen, and it says "No Radio".
Sounds like from when I read the Wiki he was supposed to install an intermediary Rom before jumping all the way to 3.2.0.
I've suggested using the Olipro SPL 1.2 unlocker, the Titan Relocker, several different ROM's and am at a loss as to how to fix it. He's still stuck at the Verizon screen displaying "No Radio."
Any suggestions?
Thanks
Click to expand...
Click to collapse
Can you get to the bootloader by holding down camera power and pushing the reset button? If so, you can flash the radio with the SD method found in the wiki. just put the radio on the sd card in the proper format and enter bootloader and it should correct your problem.
Can I suggest something to try? (assuming you have 6800)
1. Get the sprint release. http://forum.xda-developers.com/showthread.php?t=402887
2. in bootloader, load the sprint release by usb method. when it gets to having you touch the screen, soft reset.
3. In bootloader, load the dcd 3.2.0 rom (or any other rom).
4. Hard reset.
This should give you 3.2.0 rom and 3.42.02 radio.
Responses
Hey guys,
Thanks for the responses and suggestions.
1) At the moment he doesn't have an SD card aside from the SDHC, so he couldn't do that until he purchases one. Good idea though if nothing else works
2) When pressing the camera/power/reset he's in the SPL 2.4 bootloader screen, he's going to try your suggestion of downloading Sprints and upgrading.
3) I'll ask him procedurally what else he has tried, what error he gets for recording. No doubt you were correct about uploading the Radio before the ROM
I've actually flashed my phone exactly the same way he has so that I can try to experience the same problems, and try to figure it out myself.
Bingo
Hey,
The Sprint ROM .exe was the answer. Very smart, thanks again for helping us both out. Was getting a little nervous for about 2 minutes.
useful=helper++
I did the same thing. Thank you very much...saved my butt!
BC
its alive
spreeway said:
Can I suggest something to try? (assuming you have 6800)
1. Get the sprint release. http://forum.xda-developers.com/showthread.php?t=402887
2. in bootloader, load the sprint release by usb method. when it gets to having you touch the screen, soft reset.
3. In bootloader, load the dcd 3.2.0 rom (or any other rom).
4. Hard reset.
This should give you 3.2.0 rom and 3.42.02 radio.
Click to expand...
Click to collapse
you saved my titan...thanks guy!
I currently have a Verizon Wireless fully flashed to cricket XV6800. I decided to know about hacking the Mogul so what I try to do was Look up WMDC 6.1 and apply it to my phone. When i did this the screen stopped at 11%. I took out the battery and tried to turn it on and i get a Red, Green, and Blue color on the start up screen. The words that are on the phone are TITA100 SPL-1.20.Olipro and on the bottom it says USB when connected and Serial when not connected. I looked every where to and figure it out how to get my phone back to the same way. I downloaded so many programs like Titan Unlocker, Titan exitbl, but all these programs do is say my phone is not connected when it is connected. I hear the Sound when the connection for the USB is connected and disconnected. What can i do Will i ever get my phone back to the same state that it once was. I was wondering also that since my phone was flashed that the software will be erased. Is there any way that I can get my Cricket Service. By the way before i did all the hacking what i did was back everything up on the memory card. Is there a way I can restore that through the phone even though i cant access the menu?
I'm going crazy--Thank you for your time to read and for those who can give me some word of advice or some way that my problem can be solved.
Thank you
if u are using xv6800.. i believe u have to install bootloader 2.40 or 2.47.. maybe that might be the problem when installing wm6.1
First, your phone is not bricked.. bricked means broken.. unfixable.. a brick!
You also need to let us know what you software you want to run... DCD 3.2.6?? WMDC 6.1 is Windows Mobile Device Center.. it's not a rom?? So I dont know what you tried to flash.
You need to read the instructions!! Sounds like You upgraded your rom (or tried to) with a non compatible bootloader.. if you dont want to bust your $200 - $500 phone perminently.. you should read the directions twice.. (I read them 4 times, then asked questions before the first time I flashed mine)
When you plug in the device and hear the usb sound.. check device manager.. make sure you see a usb device.. Your OS shoul have installed drivers... Then try the info below.
scrosler said:
1. Download OliPro 2.40 and run it. Ignore the part that asks you to verify the Active Synch connection. Its not needed for anything but a connection confirmation.
2. After running OliPro 2.40 you should be stuck at the three color bootloader screen, Like you are now. If not hold Camera and Power and use stylus to put phone in bootloader. Make Sure it says OLIPRO 2.40 for the version on the bootloader. If not then re-run oliupro and make sure to follow the directions. Especially noting that it asks you to disconnect then reconnect the device.
Click to expand...
Click to collapse
After that you can Flash a Radio, then a rom (I recommend the SD method)
And the versions in my signature.
You can get the SPL 2.40 here:
http://www.lifesnotsogood.com/dcd1182/titan/spl/
You should also read this WIKI
http://wiki.xda-developers.com/index.php?pagename=TitanProblems
If you cant flash SPL 2.40 you will need to flash back to a ROM compatible with SPL 1.20
Read here: http://forum.xda-developers.com/showthread.php?t=392133
I'd try to grab one of thoise older Roms and flash using SD card method.
Then from within Windows Mobile (on your device) Upgrade bootloader to 2.47 (Available from the same link as 2.40 above)
Then flash the radio and rom version I have in my signature.
And dont forget to install carrier cab.
I can't seem to connect my xv6800 to the computer so I can run that program.
I plug it in and the sound comes up and I run the program but it says that it can't copy to device.
loc37 said:
I plug it in and the sound comes up and I run the program but it says that it can't copy to device.
Click to expand...
Click to collapse
Then you need to get a Rom and radio compatible with SPL 1.20.. You'll need a SD card thats Equal to or less than 2GB (NON SDHC)
Check the compatibility here: http://forum.xda-developers.com/showthread.php?t=392133
Read the instructions for flashing this here:
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
Check the Flashing with a SD card section.
Process is the same for the radio and the rom.
I cant seem to find an available rom that you need though.. I'll post back when i do.
Unless someone else has a trick for you...
You can also try a another machine that may recognize your phone.
What did you actually try to flash your phone with, and how did you do it.. this is important to help you.
Download DCD 1.6.10 and flash it to your device with the SD card method (Instructions and links in my previous Post) I couldnt find the rom, but I downloaded the kitchen and cooked a rom that should work for you.
Download it from my webserver here:
http://x51.nx-1.com/TITAN/Roms/
Remember you need a proper SD card for this.. if you don't have one, you'll need to buy one.
After flashing this rom.. Assuming your radio is compatible... You should boot into the OS (forget making calls or getting data connection) Just download SPL 2.47 and execute it on your device.. once the SPL is upgraded, Flash the newest Radio, flash the newest rom, run the carrier cab, install aplications..
Let me know if you run into trouble.
okay so what I did was cook up a ROM and then added the Radio 3.37 from alltel on it. I restated the phone and waited the windows mobile 6.1 load screen did not change I moved my keyboard and the sound functioned. I did a restart a hard reset everything I believe it is something with the rom. Any suggestions?
Thanks
loc37 said:
okay so what I did was cook up a ROM and then added the Radio 3.37 from alltel on it. I restated the phone and waited the windows mobile 6.1 load screen did not change I moved my keyboard and the sound functioned. I did a restart a hard reset everything I believe it is something with the rom. Any suggestions?
Thanks
Click to expand...
Click to collapse
Hello loc...try here>>>>http://www.jrstreet.com/flash/burgertime.htm it's a tutorial made by burgertime from howard forums in the cricket section and it's a vid so you can just got through the steps if you get confused..i'm with cricket as well...try here for mms settings that will get your pic/vid messaging working if you have the software installed>>> http://forum.ppcgeeks.com/showthread.php?t=25859 and here is a rom for cricket if you dont wanna try and cook your own just yet>>> http://forum.ppcgeeks.com/showthread.php?t=18836 i love the new dcd 326 which is what i use but in order for me to get my pic/vid messaging working i had to include an oem version of arcsoft when i cooked my rom and vetvito's rom includes everything that you would neeed so you only need to put in the correct seetings plus you need the correct bootloader(olipro 2.40 or nuespl 2.47) and a radio 3.35 or higher...thanks guys and i hope everyone enjoys the weekend and loc i hope that you get it working...by the way loc there is a cricket forum http://howardforums.com/forumdisplay.php?f=336 and a sub forum for pda's that are flashed to cricket
im1badazchick said:
Hello loc...try here>>>>http://www.jrstreet.com/flash/burgertime.htm it's a tutorial made by burgertime from howard forums in the cricket section and it's a vid so you can just got through the steps if you get confused..i'm with cricket as well...try here for mms settings that will get your pic/vid messaging working if you have the software installed>>> http://forum.ppcgeeks.com/showthread.php?t=25859 and here is a rom for cricket if you dont wanna try and cook your own just yet>>> http://forum.ppcgeeks.com/showthread.php?t=18836 i love the new dcd 326 which is what i use but in order for me to get my pic/vid messaging working i had to include an oem version of arcsoft when i cooked my rom and vetvito's rom includes everything that you would neeed so you only need to put in the correct seetings plus you need the correct bootloader(olipro 2.40 or nuespl 2.47) and a radio 3.35 or higher...thanks guys and i hope everyone enjoys the weekend and loc i hope that you get it working...by the way loc there is a cricket forum http://howardforums.com/forumdisplay.php?f=336 and a sub forum for pda's that are flashed to cricket
Click to expand...
Click to collapse
Okay what i have done now is loaded my own personal ROM and then added 3.42.02 Radio to it. The only problem with that is that it keeps restarting and restarting its really weird. Is there any way that i can fix that?
Thank you
loc37 said:
Okay what i have done now is loaded my own personal ROM and then added 3.42.02 Radio to it. The only problem with that is that it keeps restarting and restarting its really weird. Is there any way that i can fix that?
Thank you
Click to expand...
Click to collapse
do you have one of the correct bootloaders? because just flashing to a custom rom and adding a new radio doesn't give you the bootloader that you need so you have to have that too...you can check it by holding down the power button, the camera button and inserting your stylus into the soft reset hole at the bottom of the phone and to get back out of it just do a soft reset but it needs to be be either 2.40 or 2.47 not 1.20 or anything else
im1badazchick said:
do you have one of the correct bootloaders? because just flashing to a custom rom and adding a new radio doesn't give you the bootloader that you need so you have to have that too...you can check it by holding down the power button, the camera button and inserting your stylus into the soft reset hole at the bottom of the phone and to get back out of it just do a soft reset but it needs to be be either 2.40 or 2.47 not 1.20 or anything else
Click to expand...
Click to collapse
When I turn off my phone it says 1.20. What can i do to change it? What software should i Download?
Thank You very Much
loc37 said:
When I turn off my phone it says 1.20. What can i do to change it? What software should i Download?
Thank You very Much
Click to expand...
Click to collapse
......flash a stock pre-gps rom and then upgrade the bootloader to 2.47........then flash whatever you like....
flyers2114 said:
......flash a stock pre-gps rom and then upgrade the bootloader to 2.47........then flash whatever you like....
Click to expand...
Click to collapse
Okay I solved that problem but now when I click on the settings option on the menu my phone freezes. What can be the cause of that? Did I cook the ROM wrong?
Thanks
loc37 said:
Okay I solved that problem but now when I click on the settings option on the menu my phone freezes. What can be the cause of that? Did I cook the ROM wrong?
Thanks
Click to expand...
Click to collapse
Usually that means you have the wrong build of MSVC installed use build 19209...
loc37 said:
Okay I solved that problem but now when I click on the settings option on the menu my phone freezes. What can be the cause of that? Did I cook the ROM wrong?
Thanks
Click to expand...
Click to collapse
if you now have the correct bootloader and radio...try flashing with a pre-cooked rom like dcd 326 or the rom from the links that i gave you...the popular one was the black pill and there is one that's specifically for cricket
do I just google that build number or is there a specific program I should download?
Thanks
loc37 said:
do I just google that build number or is there a specific program I should download?
Thanks
Click to expand...
Click to collapse
LOL..no if you lookk about five post up you will see DCD 326 and as for the other from vetvito it was in one of the links that i first posted for you
loc37 said:
When I turn off my phone it says 1.20. What can i do to change it? What software should i Download?
Thank You very Much
Click to expand...
Click to collapse
Did you read any of my posts...
Hrm.. could have sworn I addressed this already.
x51 said:
You can get the SPL 2.40 here:
http://www.lifesnotsogood.com/dcd1182/titan/spl/
Click to expand...
Click to collapse
x51 said:
Then from within Windows Mobile (on your device) Upgrade bootloader to 2.47 (Available from the same link as 2.40 above)
Then flash the radio and rom version I have in my signature.
Click to expand...
Click to collapse
I included links, and all the information you would need.. (Like the Rom/Radio/SPL compatibility list) yet you didn't read it.
I spent time finding those links, downloading a rom.. cooking it for you, and uploading it to my webserver so you can download it.
x51 said:
Download DCD 1.6.10 and flash it to your device with the SD card method (Instructions and links in my previous Post) I couldnt find the rom, but I downloaded the kitchen and cooked a rom that should work for you.
Download it from my webserver here:
http://x51.nx-1.com/TITAN/Roms/
Remember you need a proper SD card for this.. if you don't have one, you'll need to buy one.
After flashing this rom.. Assuming your radio is compatible... You should boot into the OS (forget making calls or getting data connection) Just download SPL 2.47 and execute it on your device.. once the SPL is upgraded, Flash the newest Radio, flash the newest rom, run the carrier cab, install aplications..
Let me know if you run into trouble.
Click to expand...
Click to collapse
I also explained that once you boot into windows with that rom, you need to upgrade your bootloader to 2.47 (with instructions) and then your radio, and then rom.
The path was simple..
Flash dcd 1.6.10 (compatible with SPL 1.20) so the phone will boot
Upgrade SPL (bootloader to 2.47)
Flash new radio (3.47.50)
Flash new Rom (3.2.6)
Run carrier cab.
If you are still asking about where to get the (SPL) bootloader.. I guess I cant help you....
Hello guys, I have a little bit of a problem, and I am hoping that you guys can help me out. About 10 months ago I upgraded from my stock ROM to dcd's 2.3.2. rom and 3.27.00 radio. Every thing went fine, loaded up 2.40 olipro and the installation went perfect. Now last month I saw that dcd came out with 3.2.6 and wanted to upgrade my rom and radio, but this is were i'm running into problems. I was able to flash the 3.2.6. rom, but I am unable to flash the radio. I have searched up and down these forums and checked out the wiki's and havn't been able to find a solution. So now all i'm left with is a phone that can't make a phone call but is still able to send sms messages. If anyone has any helpful tips or even a solution to my problem it would be much appricated.
I thought the 3.27 radio works with 3.2.6. What is happening when you try to flash the radio? and what method are you using to flash it (SD card or pc)? Also when you bootup the phone does it say 3.27 radio still? I believe all the newer DCD roms need a carrier cab have you installed the cab? I'm pretty sure the phone won't be able to make calls without the cab installed. 1 more Q what service do you have?
shield001 said:
I thought the 3.27 radio works with 3.2.6. What is happening when you try to flash the radio? and what method are you using to flash it (SD card or pc)? Also when you bootup the phone does it say 3.27 radio still? I believe all the newer DCD roms need a carrier cab have you installed the cab? I'm pretty sure the phone won't be able to make calls without the cab installed. 1 more Q what service do you have?
Click to expand...
Click to collapse
When I flash the radio it goes to 8% flashes a red light and then resets. I have also tried both methods of flashing but none works. When I bootup the phone it does still say 3.27 as the radio. I have also tried to install a carrier cab but have had no luck.
Try updating to Hard SPL 2.47
The 3.27 Radio is NOT compatible with ANY DCD version 3.X and higher..... Have you read the Wiki? Can you flash the radio using the SD card method? All of your questions have answers in the Wiki.....
You should flash back to 2.3.2. Go into the bootloader(tri-color screen) and then flash 2.3.2 to the phone..... reboot it.... it should load up ok.... If this works for you to this point, you have several options to upgrade the radio ..... Read the Wiki....
azclown said:
The 3.27 Radio is NOT compatible with ANY DCD version 3.X and higher..... Have you read the Wiki? Can you flash the radio using the SD card method? All of your questions have answers in the Wiki.....
You should flash back to 2.3.2. Go into the bootloader(tri-color screen) and then flash 2.3.2 to the phone..... reboot it.... it should load up ok.... If this works for you to this point, you have several options to upgrade the radio ..... Read the Wiki....
Click to expand...
Click to collapse
I looked over the wiki again and was able to re-flash to 2.3.2. Thanks for your help guys.