The program for change size of the PagePool on Gene (HTC P3400, Dopod D600) without a reflashing
and losses of data.
Not to use on other models of devices.
To use at own risk.
Usage:
Copy file gene_pps_changer.exe on a device, and run it, having specified in a command line
the necessary quantity MByte under PagePool, for example:
gene_pps_changer.exe 6
The program will work ~ 10 seconds (at this time it seems, that a device hungup), and
then will reboot the device. Come into Settings -> System-> Memory, and be convinced
in change of the size of the RAM. HardReset does not occur, all your data remain on a place
(Though superfluous backup never stirred to nobody).
For use simplification, prepeared some shortcuts with the necessary parametres.
Copy gene_pps_changer.exe on a device in the ROOT, NOT ON the MEMORY CARD,
and one of the shortcuts necessary to you:
gpps4.lnk - For 4МБ PagePool
gpps6.lnk - For 6МБ PagePool
gpps8.lnk - For 8МБ PagePool
gpps12.lnk - For 12МБ PagePool
Run the copied shortcut in a device.
Good luck.
test ok ,after hard reset ok.
great! thanks.
Thank God. You are a genius.
rio500你是怎么运行的？怎么我的不行？
It doesn't work on my D600. When I run the gpps6.lnk , gene_pps_changer.exe pops up, and then device locks up. nothing happens. I have to soft reset it. Nothing changes. When I tried to run it again. It says Not find need block. What's wrong?
Great. It's done!!!
Can it works in wm5??
how to run in comand line in wm5
It works on my WM5, but with a higher os version.
NJackal said:
how to run in comand line in wm5
Click to expand...
Click to collapse
Hold the center button at the bottom of the panel and click the time indicator top right corner of the screen.
felixyang said:
It works on my WM5, but with a higher os version.
Click to expand...
Click to collapse
What's you os version?
1.60?
Rom version: 1.6.706.10 CHS
felixyang said:
Hold the center button at the bottom of the panel and click the time indicator top right corner of the screen.
Click to expand...
Click to collapse
bro i get only run and time options i dont get and command line
NJackal said:
bro i get only run and time options i dont get and command line
Click to expand...
Click to collapse
yes at last did it thanks friends for ur guidence
orefkov said:
The program for change size of the PagePool on Gene (HTC P3400, Dopod D600) without a reflashing
and losses of data.
Not to use on other models of devices.
To use at own risk.
Good luck.
Click to expand...
Click to collapse
thanks orefkov, just a small question. what is the default PagePool on Gene and how can I get it back ?
Default PP size on Gene is 12 MB.
Copy gene_pps_changer.exe and gpps12.lnk on devaice, at root, and run gpps12.lnk
May i know how this helps?
Great! 50.92MB~
^^ yeah mine shows 51mb
and using pBar i see that free RAM is 31mb!! while usually it'd be around 20mb.. this is great! but what are the disadvantages i;d like to know..
Not find need block. 91,120
Not find need block. 91,120
whats this message? and whats the problem?
my device is HTC P3400!
Related
After upgrade to 1.60 - after hard reset just before the customizations start to run (you got 3 seconds time) soft reset the device. Make the ExtROM viewable and delete the line "EXEC:\Extended_ROM\TPEnable.exe" from "Config". That´s it - the ROM stays read/write.
Enjoy and have fun...
Siegi
PS: nice try from T-M*bile to spoil our fun - but too easy to hack!
cool
thanks
Othman
Strange. TPEnable.exe and TPDisable.exe stand for Touch Panel Enable and Touch Panel Disable. And that's exactly what it does....... then, can someone explain to me what this would have to do with the read-only status of the T-Mobile Extended Rom??????
this does not seem to work for me - 1.52 qtek rom.
try http://www.ppcw.net/index.php?itemid=1638
:?
sortner said:
After upgrade to 1.60 - after hard reset just before the customizations start to run (you got 3 seconds time) soft reset the device. Make the ExtROM viewable and delete the line "EXEC:\Extended_ROM\TPEnable.exe" from "Config". That´s it - the ROM stays read/write.
Click to expand...
Click to collapse
Hm, where do I find this line. It's neither in my AUTOCONFIG.TXT nor in my CONFIG.TXT of my Australian XDA II version - still, the Extended ROM is read-only...
olivier: making it visible is not the same as un-writeprotecting it.
farnold: I don't think the tpenable/disable has anything to do with the write protect, so it is possible that it is not in your rom. if it is used, you will find it in '\Extended_ROM\config.txt'
XDA developer Itsme said:
farnold: I don't think the tpenable/disable has anything to do with the write protect, so it is possible that it is not in your rom. if it is used, you will find it in '\Extended_ROM\config.txt'
Click to expand...
Click to collapse
Thanks, mate. I thought the same thing. The question though remains how do I remove the write protection? Is that also a REGISTRY hack or does it require more than that?
XDA developer Itsme said:
olivier: making it visible is not the same as un-writeprotecting it.
Click to expand...
Click to collapse
Oups,
sorry for my mistake, i ve made an error when i paste the link, try this one
http://www.smartphone4u.de/xda2/grundlagen/extended_rom.html
Best regards :lol:
XDA developer Itsme said:
this does not seem to work for me - 1.52 qtek rom.
Click to expand...
Click to collapse
Me either, I-mate 1.52.00 WWE
heya, I noticed a whole lot of useless programs that I dont use from the ext. rom that ships with the cingular 8525..
I know from my previous phones I'm able to hardboot and when that message comes up.. something like "installing custom components in 3 seconds.." one would do a softreset and that installation shouldnt come up again right?
well I was wondering what cab files were needed so I can install only the needed ones.. ie mms/wifi setup files, etc.
Anyone know? Thanks!
Dunno if you ever got your answer, but I can guarantee you that when I get mine tomorrow, it's one of the first things on my list of things to do. I know that 90% of the crap that Cingular puts on there I have no need for..
If someone figures this out let us all know. i too wanna try to play around with some other ROM's to see which works best with my configuration.
I upgraded from a TyTN to the Cingular ROM
I did the reboot thing so that I did not get the "value-add" stuff from Cingular after I let it do its normal thing. What I found out was that if I did not do the reboot thing, the "value-add" stuff from Cingular changed the keyboard mapping so that I could not figure out what keys the special characters were on. When I hard setup again, I rebooted and the keyboard works great. The only thing is, you have to put in all the information in the connection menu.
There's 2 times that the 3 sec screen pops up.
Does the keymapping work correctly if you let the first one run and do the reset before the second one?
Well I just tried my suggestion above and everything works great.
I let the first install run, and then just after the second 3 sec. pop-up window, I reset.
Then I used Total Commander to install everything but GetGood, ExpressMail, MobileTV, and TelNav.
I ended up with more user memory.
berdinkerdickle said:
Well I just tried my suggestion above and everything works great.
I let the first install run, and then just after the second 3 sec. pop-up window, I reset.
Then I used Total Commander to install everything but GetGood, ExpressMail, MobileTV, and TelNav.
I ended up with more user memory.
Click to expand...
Click to collapse
Do you have the before and after memory numbers by chance I would like to see them if you do?
the keyboard setup is done in the first 3 second customization.. those cabs are in the windows folder.. the 2nd customization is the cingular stuff from the ext rom
aadadams said:
Do you have the before and after memory numbers by chance I would like to see them if you do?
Click to expand...
Click to collapse
Sorry, I didn't see the exact before and after.
It looked like I gained a little over 1mb.
What exact cabs in the \Windows\ folder are needed to install in order to fix the keyboard? I just hard reset my 8525 and the "-" and "_" show up as " and +
Exact file names please
MilanoRex said:
What exact cabs in the \Windows\ folder are needed to install in order to fix the keyboard? I just hard reset my 8525 and the "-" and "_" show up as " and +
Exact file names please
Click to expand...
Click to collapse
Its a registry setting, see the last entry here.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
saq said:
Its a registry setting, see the last entry here.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
Click to expand...
Click to collapse
That worked, thanks
berdinkerdickle said:
Well I just tried my suggestion above and everything works great.
I let the first install run, and then just after the second 3 sec. pop-up window, I reset.
Then I used Total Commander to install everything but GetGood, ExpressMail, MobileTV, and TelNav.
I ended up with more user memory.
Click to expand...
Click to collapse
What was the "other stuff" you had to self install? I am contemplating this procedure but am not sure if it gives me enough storage space to justify a hard reset and reinstall of everything?
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Yeah it doesnt work....Your now stuck with the Wizard Love Rom or you can upgrade to another rom but you cant go back to the original Cingular Rom.
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
internetadam4657 said:
ok right now i'm running the love rom on my g4 wizard. how do i reflash my original cingular rom? i know, it sounds like a nub question but here is the problem. it will flash then hang at 80% and the progress bar will turn red. it will then pick up again and continue to 95% then turn red, fail and say error 326 invalid command. i downloaded the updater directly from htc.
any ideas guys?
Click to expand...
Click to collapse
That ROM is for a G3 Wizard, Check your PM's
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
internetadam4657 said:
ok i reflashed with your method and i'm back to my cingular rom. thanks a lot!
(big reason to go back was it was the only rom that my school's wifi app would work with, plus the love rom in combo with orwells wm6 wasn't cool. that splash was ugly IMO)
Click to expand...
Click to collapse
If you were talkin' to me...glad I could help...one question though...
did your ext Rom install on its own?
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
All you have to do is download and install the Ext Rom cabs manually. This may still be available on the ftp. If not PM me.
It worked for me
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
internetadam4657 said:
no, i still had a blank ext rom as i had to setup all my internet settings, etc again. how can i fix that one?
Click to expand...
Click to collapse
luiggi said:
Thanks a lot ercave1, the ROM flashed flawlessly, however the EXT ROM didn´t came up by itself. The features I´m missing are as follows:
1.- USB switch to select activesync mode to serial or RNDIS is missing, regardless this USB sync to PC (Activesync 4.5) is alive and working well.
2.- ClearVue pdf is missing, not a big loss and I really don´t care since there´s another alternatives to read and diisplay pdf documents.
3.- GetGood and in general all connection settings! I don´t give a s**t!!
4.- MIDlet Manager, big loss... I´m going to keep trying to download Risidoro_Intent_MIDlet_ Manager_V11 whenever the ftp be up and running again. So no worries.
5.- Voice Speed Dialing Settings icon in both the Program ans Setting screens are missing, however the software is running when I press the known VSD button.
6.- Cingular carrierlogo! I don´t care I have my own logo.
And I guess that´s it !
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Thanks again ercave1 for the big help
Click to expand...
Click to collapse
Yes, this is because the Ext Rom was wiped out by the G3 Rom having been flashed on your G4 devices. I don't remember reading about a fix for this, but you may want to search through the forum. The only solution I'm aware of is to install the Ext Rom manually.
I'm glad you guys got the device running again.
Regards,
ercave1
luiggi said:
Regardless the comments above, I´d like to learn how to "extract" the correspondent EXT ROM cab files, if you guys have and advice on it would be great.
Click to expand...
Click to collapse
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Reflashing ExtROM CID Locked
Who knows Russian go to http://4pda.ru/forum/index.php?showtopic=32996 & read my post
And the one who does not know it?
thanks to: Murchelago
literal from the Russian to English
it is the first step. if someone can polish it (I do not speak English good).....
_________________________________________________________________________________________
Already many know that mun built Shell Of tool, which was capable of pouring axis into Wizard G4 with [lochennym] [Sidom], but to the enormous regret it does not know how to pour with [ekstrom].
Recently it decided to be played a little with the program of nb2nbf and to verify, is it possible by nevertheless any means to renew also Extended Of rom to CID-Locked apparatuses. And which there was my happiness, when I revealed after [pereproshivki] that he renewed.
It decided by the same method to try to flood Splash Of screen and HTC Of logo - everything proved to be very simply.
In view of the small quantity of information on the forum on [devaysu] Of wizard G4, it decided to build brief instruction on its [pereproshivke].
1. We stitch through apparatus by pure piercing - Wizard_Love_2.26.10.2_WWE_Novii+CF2.
http://rapidshare.com/files/8651097/Wizard...E_Novii_CF2.rar
2. By the program of typho5 we unpack nbf the file of piercing, which we desire to pour into the beast.
First we fill up into the folder with the program of nbf, and then start with the parameter of typho5.exe - x nk.nbf. After procedure we obtain several files, in number of which is contained OS itself, Extended Of rom, and also as a rule Splash Of screen and HTC Of logo.
([ZY]. For convenience in the use of program made [batnik]. Simply you will place nbf into the folder and will neglect typho.bat)
3. Now we gather our nbf file, each at will can include any desired components in it, naturally, except axis itself.
4. We go in very [progu] of nb2nbf and we make the following tuning:
- We establish Model ID: WIZARD
Language: it is empty
OEM: it is empty
Operator of version: it is empty
CID: it is empty ([ochen]_[vazhno]); remove the numbers, which are contained inside the field
- We establish [galochku] opposite “File of # 1”, we click on the button of survey (button with three points), we find the file Of extended Of rom' and (in the folder of typho5, the exemplary name of 9b000000-Extension.nb)
- In the field “Of start Of address” we enter 9b00000
- In the field “Of image Of name” we enter Extension Of rom (not Extended Of rom, you be attentive!!!)
- In the point “Of file of # 2” we find Splash Of screen, in the field of address we enter 92000000, in the field “of image of name” we write Splash Of screen.
- In the point “Of file of # 3” we find HTC Of logo, in the field of address we write 9d000000, in the field “of image of name” we write WITH HTC Of logo.
- We press button “Translate”
- Extended ROM is ready, it is possible to stitch through.
Unnecessary for you files it is possible simply not to include, but to insert, for example, only one by [ekstrom].
5. We place the obtained file of nbf into the folder [proshivalshchikom] and start. Procedure as with the usual piercing, lasts in all the pair of minutes.
6. We pour the axis Of shell Of tool' ohm from mun' of a.
Finale - valuable piercing
Don´t know
mestrini said:
What do you mean with 'extract'?
1-From the RUU exe file?
2-From nk.nba?
3-Phone disk dump?
4-WinCE disk reading?
Click to expand...
Click to collapse
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
luiggi said:
I really don´t know from where and how mestrini, that´s the reason why I quoted the word extract and included the word learn
Click to expand...
Click to collapse
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Sounds great to me!
mestrini said:
I enumerated the options since each have its own reason
1- Use Winrar to open RUU.exe and use typhoonnbfdecode.pl to extract the 10MB file (0xA00000 bytes) of the extended rom from nk.nbf
2- oops, same as 1 (and its nk.nbf- not nk.nba). hehe, my mistake
3- use pdocread.exe to read BDTL1 - or TRUEFFS_DOC1 (use my Wizard Service Tool as it can be done with a few clicks )
4- Unhide extended_rom and use Active Sync to copy the files to PC (or, once again use my tool to do the same )
cheers
Click to expand...
Click to collapse
Thanks a lot mestrini, I appreciate your input and I´ll give it a try right away!
ok, the current KITL tutorial is horribly crap since it takes you bloody ages before you can do anything; here's what you *actually* need to do:
Download Platform builder, Emulator and ARMV4i are probably not necessary... can't guarantee that, but you can rerun the installer anyway and just get those to add on.
run Platform builder, start a new platform, select custom, leave everything blank, that's fine.
now, for the juicy part;
firstly take a random dll, hell take ANY file and copy it 4 times as ril.dll rilgsm.dll serial_cmd.dll and stk_service.dll (the stk_service.dll might not actually be necessary either) also, create a blank text file here and rename it to nk.bin
now, go to Target --> Connectivity Options. set the Download to None, the Transport to USB and the Debugger to None, go ahead and click Apply, then click Close.
go to Build OS --> Open Release Directory; note down the folder path and go to it in explorer and copy the 4 files from earlier there.
Go back to Platform Builder and go to Target --> Release Directory Modules, in there you'll be able to add the 4 dll files to the release, once all are added, click OK.
now for your Hermes: hold the Power + Comm buttons and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL.
once activated, go to Target --> Attach Device and just wait for the device to load, it won't take very long.
once loaded, you can use the device normally EXCEPT for disconnecting the USB... that'll lock the device up, so the best thing to do is of course lob SSPL on to it via an SD card and you're away.
Wonder what PB is actually doing to the phone to get access to it without the OS. Could we not create a program that basically does whatever PB does, but all automatically and once SSPL is loaded, push your HardSPL on it?
Oli, I think it goes without saying you are just too darned smart!!! Keep up the great work!
LegolasTheElf said:
Wonder what PB is actually doing to the phone to get access to it without the OS. Could we not create a program that basically does whatever PB does, but all automatically and once SSPL is loaded, push your HardSPL on it?
Click to expand...
Click to collapse
KITL is the Kernel Transport layer, what PB does is firstly communicate via this layer to try and push a null kernel image to the device (in our case) which fails, resulting in the normal kernel booting instead.
the second stage is that 3 null files (or at least not signed) are pushed to the phone intended to be used instead of the radio interface dll's... since of course, the radio isn't actually working and is hence crashing the OS, as a result, these Dll's never get executed, meaning the phone no longer crashes.
the reason this used to be so horribly slow was due to the ridiculous emulator image getting pointlessly pushed to the phone.
Is this one of those things that it's just not worth duplicating PB? Or, can we also push a null image to the device in a faster/easier way that also does the same thing, but, without needing windows and/or PB?
LegolasTheElf said:
Is this one
of those things that it's just not worth duplicating PB? Or, can we also push a null image to the device in a faster/easier way that also does the same thing, but, without needing windows and/or PB?
Click to expand...
Click to collapse
well, sniff the USB port and see for yourself
Thanks!!!
Olipro said:
ok, the current KITL tutorial is horribly crap since it takes you bloody ages before you can do anything; here's what you *actually* need to do:
Download Platform builder, Emulator and ARMV4i are probably not necessary... can't guarantee that, but you can rerun the installer anyway and just get those to add on.
run Platform builder, start a new platform, select custom, leave everything blank, that's fine.
now, for the juicy part;
firstly take a random dll, hell take ANY file and copy it 4 times as ril.dll rilgsm.dll serial_cmd.dll and stk_service.dll (the stk_service.dll might not actually be necessary either) also, create a blank text file here and rename it to nk.bin
now, go to Target --> Connectivity Options. set the Download to None, the Transport to USB and the Debugger to None, go ahead and click Apply, then click Close.
go to Build OS --> Open Release Directory; note down the folder path and go to it in explorer and copy the 4 files from earlier there.
Go back to Platform Builder and go to Target --> Release Directory Modules, in there you'll be able to add the 4 dll files to the release, once all are added, click OK.
now for your Hermes: hold the Power + Comm buttons and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL.
once activated, go to Target --> Attach Device and just wait for the device to load, it won't take very long.
once loaded, you can use the device normally EXCEPT for disconnecting the USB... that'll lock the device up, so the best thing to do is of course lob SSPL on to it via an SD card and you're away.
Click to expand...
Click to collapse
Olipro thank you very much for this very nice explanation.
Worked perfectly . Maybe change in your tutorial copy 5 filess ( u wrote 4 files only the dlls ) to the release folder.
Another Time: THANK YOU VERY MUCH!
Best regards.
A nub
AdoMad
ActiveSyncen
Hello,
I have just a dump question:
After recovering my HTC Hermes and installing, which is now already deinstalled:
It is not synchronizing anymore with my hermes.
It is connected to my hermes and the activesync sign is making rounds, but nothing its happening.
I can access the SD card from Activesync but synchronization is not working.
I deinstalled activesync and installed it as well as I deinstalled the windows CE stuff.
Whats happened?
Thanks for help in advance!
adomad said:
Hello,
I have just a dump question:
After recovering my HTC Hermes and installing, which is now already deinstalled:
It is not synchronizing anymore with my hermes.
It is connected to my hermes and the activesync sign is making rounds, but nothing its happening.
I can access the SD card from Activesync but synchronization is not working.
I deinstalled activesync and installed it as well as I deinstalled the windows CE stuff.
Whats happened?
Thanks for help in advance!
Click to expand...
Click to collapse
not a bloody clue... play with it, I don't know
weired....
it does not work so far...
I tried different things, but no success!
Thanks anyways.
AdoMad
Thanks Oli..it works..I confirm
hdubli said:
Thanks Oli..it works..I confirm
Click to expand...
Click to collapse
O RLY?
I know it works mate... but thanks for pointing it out
Fantastic
Thank You Oli.
I had a 8525 brick for 2 weeks. I tried the superdave method many times without success. This method worked the first time. 30 minutes later I have a fully working phone again!
Great walk through Oli - if I get to that stage I know where to come but with Hard-SPL and the RUU Wrapper hopefully it shouldn't come to that
Olipro said:
ok, the current KITL tutorial is horribly crap since it takes you bloody ages before you can do anything; here's what you *actually* need to do:
Download Platform builder, Emulator and ARMV4i are probably not necessary... can't guarantee that, but you can rerun the installer anyway and just get those to add on.
run Platform builder, start a new platform, select custom, leave everything blank, that's fine.
now, for the juicy part;
firstly take a random dll, hell take ANY file and copy it 4 times as ril.dll rilgsm.dll serial_cmd.dll and stk_service.dll (the stk_service.dll might not actually be necessary either) also, create a blank text file here and rename it to nk.bin
now, go to Target --> Connectivity Options. set the Download to None, the Transport to USB and the Debugger to None, go ahead and click Apply, then click Close.
go to Build OS --> Open Release Directory; note down the folder path and go to it in explorer and copy the 4 files from earlier there.
Go back to Platform Builder and go to Target --> Release Directory Modules, in there you'll be able to add the 4 dll files to the release, once all are added, click OK.
now for your Hermes: hold the Power + Comm buttons and soft reset and wait for the KITL dialog to appear, now is the CRITICALLY missed step; you need to press the small OK button on the LEFT of the device to activate USB KITL.
once activated, go to Target --> Attach Device and just wait for the device to load, it won't take very long.
once loaded, you can use the device normally EXCEPT for disconnecting the USB... that'll lock the device up, so the best thing to do is of course lob SSPL on to it via an SD card and you're away.
Click to expand...
Click to collapse
Hi Olipro, Could you share or attached your mention below 4 fils us:
ril.dll
rilgsm.dll
serial_cmd.dll
and stk_service.dll
For us download.
Thanks a lot
mmgirlmm said:
Hi Olipro, Could you share or attached your mention below 4 fils us:
ril.dll
rilgsm.dll
serial_cmd.dll
and stk_service.dll
For us download.
Thanks a lot
Click to expand...
Click to collapse
Hey mmgirlmm, it's post like these that will give Olipro a Myocardial Infarction or better known as a Heart Attack. He's on the edge as it is and I really don't want to push him over! Most people here know he's done a lot of good for this community and inane posts like these will take him from us for good!
I realise that English may not be a strong point but Olipro could not have made it much clearer.... use ANY file. If you do not know what one of those is or can not find one on your phone then leave it be!
@Olipro
St John's Wort is good to calm the nerves & ease depression, or find out what Pof takes.
Wam7 said:
Hey mmgirlmm, it's post like these that will give Olipro a Myocardial Infarction or better known as a Heart Attack. He's on the edge as it is and I really don't won't to push him over! Most people here know he's done a lot of good for this community and inane posts like these will take him from us for good!
I realise that English may not be a strong point but Olipro could not have made it much clearer.... use ANY .dll. If you do not know what one of those is or can not find one on your phone then leave it be!
@Olipro
St John's Wort is good to calm the nerves & ease depression, or find out what Pof takes.
Click to expand...
Click to collapse
HI Warm, u r a good man, thanks a lot your post.
I think many ppl here who already brick their hermes, at this situation that is cannot copy the dill from the their hermes ppc. That Y i have this request from Olipro if he possible to share or attached file to here.
u r a good man, could u share or upload these ANY dll file to here to share for ppl who need in this form.
Thanks
Telling me I am a good man will not get me to post the files. I have not had reason to use Platform Builder but just from reading the Oli's post I think he means any .dll on your computer not phone as I alluded to.
Somebody will come along to make it totally clear for those poeple whose English might not be very good.
Check your PC firewall settings
adomad said:
weired....
it does not work so far...
I tried different things, but no success!
Thanks anyways.
AdoMad
Click to expand...
Click to collapse
Adomad, depending on what firewall program you have, you may need to wander through it's settings to check whether it has exclusions to allow your reinstalled version of ActiveSync to access the necessary ports to sync.
mmgirlmm said:
HI Warm, u r a good man, thanks a lot your post.
I think many ppl here who already brick their hermes, at this situation that is cannot copy the dill from the their hermes ppc. That Y i have this request from Olipro if he possible to share or attached file to here.
u r a good man, could u share or upload these ANY dll file to here to share for ppl who need in this form.
Thanks
Click to expand...
Click to collapse
Wam7 has tried to explain this... yet clearly you're failing to listen.
INVENT A FILE, THEY DO NOT HAVE TO BE REAL.
you could take a text file like mypasswords.txt and rename it to ril.dll then copy it 3 times and rename those... it doesn't make a blind bit of difference, do you get it now?
--------------------------------------------------
JWMD Armids 1.0a
Ever want to change the number of columns in your Windows Mobile 6.5/x Start Menu without doing a lot of hardwork? Here's another tool to do the job for you.
Armids can change your the number of columns in your Windows Mobile 6.5/6.5.x Start Menu or Edit the Start Menu Item look or even change the Selection Background image!
--------------------------------------------------
Armids supports the ff resolutions:
QVGA
WQVGA
SqVGA
VGA
WVGA
Armids has this ff features:
Change the number of columns
Portrait
Landscape
Change Selection background not yet implemented
Restor original GridScene file from custom ROM or Original Firmware
- Backup occurs upon first use of the application.
--------------------------------------------------
Using Armids
Please make sure that your device is currently in Portrait mode.
KNOWN PROBLEMS
No effect after reset
You ROM uses custom GridScene that was setup in registry. I have not yet got any answer on Chefs thread about setting this up. So if you have any idea, please share.
This registry key has something to do with it "[HKEY_LOCAL_MACHINE\Security\Shell\StartMenu] "CustomGridForm"="StartMenuCust"
History said:
February 27, 2011
- Landscape support
- Fixed some null errors when reading the CPL file.
Click to expand...
Click to collapse
Guys when reporting an error
Kindly include this details:
Device Brand and Model
ROM, ROM Language, ROM Link
Error Message and Screenshots
What you did before the error shown.
tried it, just letting u know it doesn't work on touch pro2 running 6.5
orlandojumpoff said:
tried it, just letting u know it doesn't work on touch pro2 running 6.5
Click to expand...
Click to collapse
you might be using custom gridscene that was setup in registry which I tried to ask in Chefs thread.. and still no answer from them
Thanks for the feedback.
very nicely done. What program were you using in the first video to control your device with your pc? I've used several. Some I like more than others but they all have their faults/lack of capability.
scott8813 said:
very nicely done. What program were you using in the first video to control your device with your pc? I've used several. Some I like more than others but they all have their faults/lack of capability.
Click to expand...
Click to collapse
I was just using an Windows Emulator from Visual Studio.
but if you want a desktop app to control the screen of your winmo device; you can use My Mobiler. It's very very free!
Nice job seeing the videos, what about making it for HVGA aswell, tried it with hope but no luck on my HD mini
Nullstring said:
KNOWN PROBLEMS
No effect after reset
You ROM uses custom GridScene that was setup in registry. I have not yet got any answer on Chefs thread about setting this up. So if you have any idea, please share.
This registry key has something to do with it "[HKEY_LOCAL_MACHINE\Security\Shell\StartMenu] "CustomGridForm"="StartMenuCust"
Click to expand...
Click to collapse
That registry key tells the start menu engine to use a "custom" .cpr layout for the Start menu. The normal filename of for the start menu layout is StartMenu_GridScene_480x800.cpr , but if you have the registry key enabled, then windows looks for StartMenuCust_480x800.cpr . HTC does this by default in their stock ROMs, in order for windows to load their custom .cpr files. A pure windows ROM will look for a StartMenu_GridScene_480x800.cpr for example.
Some chefs choose not to mess with that and just StartMenuCust_480x800.cpr gets used. *I* for example, take that key out in my ROMs and I use StartMenu_GridScene_480x800.cpr . So you just have to account for both All you have to do is look for the registry key and if it's not there, then it's safe to say StartMenu_GridScene_480x800.cpr is the layout used.
Testing on HD2 T-mobile
Does not work on HD2 T-Mo Even after reset.
Running
Manila version 2.5
Rom/2.13.531.1 (90963) WWE
Hi Nullstring,
very well done, really. I have also a future request:
- what do you think about background changing?
-- That will be the right function for the CHTArtwork thead. Because i have to many ideas and can not do all the work .
Not working
xperia x1
wm 6.5.3
rom 826x wwe
It doesn´t work in HD2 European, ROM HTC 1.66.
Humongus1 said:
Does not work on HD2 T-Mo Even after reset.
Running
Manila version 2.5
Rom/2.13.531.1 (90963) WWE
Click to expand...
Click to collapse
So...I think this would be a great add on to our HD2's. Is there going to be an update?
hi nice app. but sadly dosent work on HD2 , hope works in a future cose is a god app to have.
I got it working on my European HD2 (Factory ROM) by editing the registry value - as mentioned in an earlier post in this thread. As suggested I changed the registry key HKLM\Security\Shell\StartMenu] "CustomGridForm" to say "StartMenuCust" instead of "StartMenuCust". after a soft reset the program worked.
simonwoods33 said:
I got it working on my European HD2 (Factory ROM) by editing the registry value - as mentioned in an earlier post in this thread. As suggested I changed the registry key HKLM\Security\Shell\StartMenu] "CustomGridForm" to say "StartMenuCust" instead of "StartMenuCust". after a soft reset the program worked.
Click to expand...
Click to collapse
ok my register key now is
HKLM\Security\shell\startmenu "CustomGridForm" = StartMenuCust
what do i have to chage from this register key to make the JWMD Armis work? becouse i didnt get what u said .
hi guys!! am so sorry for this issues. Just got back from vacation!
I'll see what I can do tonight!
for the mean time. the fix for this is..
if you have stock rom or your chef did not change any graphical changes in the start menu (other than number of columns) then:
create/update this registry
[HKLM\Security\shell\startmenu]
CustomGridForm="StartMenuCust"
to
[HKLM\Security\shell\startmenu]
CustomGridForm="StartMenu"
Hey just wanted to say thanks, very handy little app. Works fine for me on my TP2 running MightyRom official. Keep up the great work!
Nullstring said:
for the mean time. the fix for this is..
if you have stock rom or your chef did not change any graphical changes in the start menu (other than number of columns) then:
create/update this registry
[HKLM\Security\shell\startmenu]
CustomGridForm="StartMenuCust"
to
[HKLM\Security\shell\startmenu]
CustomGridForm="StartMenu"
Click to expand...
Click to collapse
OK,i will install it once again on my hd2 and try your modification...
It's me again,it didn't work and showed me this error msg below...