I bought my 8525 off of ebay... the OS was upgraded too Windows Mobile 6 and it had the HTC Tytn 2 theme on it.. I insert my simcard and everything works well.. then some one calls me.. and the phone freezes.. now I am extremely new to the whole Windows Mobile game.. so I googled and did a hard reset on it.. after it finished restarting.. I notice that it is not reading the sim any more.. always says NO Service.. then I clicked on Start and then Phone.. nothing happened.. so I let it sit there.. tried the phone option again after half an hr or so and this time it went to the Phone option but.. it says something around the lines of can not check the status of sim emergency calls only.. If I go to network and select find network it says Cannot register on Selected Network Choose another network or disconnect your data connection and try again.. while no data connections nor Wifi is running.. Then I go to Band and if I try to Select the GSM 850/1900 and HSDPA 850/1900 it says Warning unable to change GSM/UMTS band Please try again later.. under device Info and next to IMEI I see blank space.. and try to select it says.. Then I found this site and read and read and read.. afterwards I went to Start.. Settings.. System and then Device Info.. Under there I see the following:
Rom Version: 3.30.2.1
Rom Date: 04/17/07
Radio Version: NONE
Protocol Version: NONE
ExtROM version: 2.11.255.102
So I figured maybe the radio part of the flash has gone bad.. so I downloaded the cingular update Flash.. it started and after 11% it frooze.. and came back with the ERROR: 262 then I had to do the mtty1[1].42.exe version to restore the phone back from Boot Mode.. then I tried a few other Flashes and all stick around 11%.. Then I tried just radio and they dont even go past 0%.. Can some one please help me
PS Sim is fine.. it works great with another phone.. also tried another working sim on the TYTN same issue
Herm100
IPL 1.04
Herm100
SPL 2.10.01ipro
sim manager does not respond when clicked on..
G None
R None
D 3.xx (xx= numbers)
try updating with a offical rom wm5 or wm5 and done
londere said:
try updating with a offical rom wm5 or wm5 and done
Click to expand...
Click to collapse
going to try right now.. thanks
londere said:
try updating with a offical rom wm5 or wm5 and done
Click to expand...
Click to collapse
does not seem to be working.. stuck on verifing connection with device.. even tho its synced with active sync
Maybe its not suppose to downgrade like that from 6 to Windows 5
Tried installing the latest rom flash from Cingulars 8525 support site and it freezes up after 11%.. just like stated in my post of this thread.. and gives an error 262
try this on another computer.... seems like youre having connection problems
thanks for the tip.. ill try it on a laptop right now
zammykoo said:
try this on another computer.... seems like youre having connection problems
Click to expand...
Click to collapse
same error 262.. even on the laptop after 11%
any other suggestions?
After letting the phone sit there for a few hrs.. I can now see the phone menu.. when I click on it.. it shows me the dialer and says ONLY EMERGENCY CALLS CAN BE MADE WITHOUT A PIN...
I was able to downgrade to windows mobile 5 using the guide here http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=27
the radio still shows as NONE and so does the protocol..
So I tried flashing just the radio and that just like always does not move past 0% and then comes back with error 262..
can some one please help me..
Maybe this will help?
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Good Luck
thanks for replying pedro2k..
spl version: 1.40.01ipro
radio= None.. (on top of SPL it says.. HERM100 IPL-1.04
Boot IN OS= Yes everything works apart from the Radio Part (device info says Radio=None, Protocol=None and IMEI= (Blank)
NO GSM= No just NONE
KITL Enabled = YES
There are some posts somewhere in the Hermes forums about radio problems like yours, have a look at all the stickies in the 4 subforums for Hermes.
thanks for the tip.. I have read quite a bit on this forum since the past few days.. Most errors are NO GSM errors.. and some NONE.. the NONE ones I have yet to see a solution for.. but I could be missing something
Related
I upgraded a TMobile XDA1 got the main ROM upgrade then went and tried to upgrade the radio stack. As I see from the many posts a bad thing to do. But this leaves me with a broken unit. The radio was T310. I can not see how I can solve this problem. I have an SD card, I have a friends German unit with an ENG Rom and the orignal radio which I will leave alone. How can I fix mine?
Thanks
GSM error on Bootload 1.50
Looks pretty much the same as my problem. By pressing the joystick after the error message, I get one step further, but no contact or upload of the ROM. I hope some wise person can supply an answer, :roll:
I have the same problem...
XDA O2 on Wallaby BootLoader v5.15 I see the error : "GSM ERROR"
my pda don´t start good I only see the rom version (3.17.03) and a blue wallpaper of O2..
I already update my rom but it don´t work yet !
Where can I find a GSM rom update? I'm from Portugal
What more can I do ?
Please, help me !
thanks
Joao Afonso, from Portugal
GSM Error
I have tried a number of solutions. None seem to work. If someone has the GSM rom and a solution to upload it let us know. I have tried coping a new radio version to the windows dir on the PPC, this fails. I have removed the back cover and battery again this does not work. The only alternative is to send it back for repair (expensive) or get a new one. I have looked at the solutions in the forum area and on the web but can not find an answer. The unit is an old TMobile (GERMAN) Xda. Upgraded the OS OK then messed up the radio. So as I say let me know if someone has a proven solution. Thanks.
How to fix GSM Error Problem ....
Download the XDA-Developers ROM Version 1.1.
Install the ROM on your Device via SD-Card and bootloader.
The phone should start up and give you the screen allignment and the whole menu!
Download an Upgrade for your device. This depends ont the model you are using. Check the sticker at the back of your device.
If it is a PW10A-Model download RSU Version 4.16.
If it is a PW10B-Model download RSU Version 6.24.20.
Extract the downloaded ZIP-File and copy all files to the /Windows directory of your device.
Copy the RSUpgrade.exe additional to the /windows/startup directory.
Make an soft reset of your device.
Maybe the upgrade will stop again at 1%, this may occur when you have an empty battery.
Place your device in the cradle. Run Active Sync on your device.
The RSU Upgrade will run in the background.
Wait for about 10 Minutes. The upgrade should complete in the background....
Afterwards all should work again...
Good luck....
Click to expand...
Click to collapse
GSM Error
Many thanks for the information. I have tried this but to sorry to say this does not work for me. I can get the RSUgrade.exe to load on the PDA, it stops at 1% and then hangs. The XDA was a TMobile GER unit with 32Mb. I have two units the same, I attempted to upgrade the radio on one and it failed at 10% rebooted and hung with GSM error. Since then I am at a loss as to the next step apart from throwing it in the bin.
same here
it always promt me failed flash device restart press ok. wat the hell is dis . does my gsm rom id basted?day i cant upgrde it tnx
Same problem..
.. and no solution for the GSM Error. There is no possibility to get a connect (O2 germany) and the RSU-Utility stops after 1% - always.
Please help!
Have you tried leaving it for 24 hours with the 1% on screen?
Flash failed
The problem is that there is a message "Flash failed - press ok to restart."
No possibility to leave the program..
same w u
ya i wish someone can find any sol 4 our prob. same problem w u guys.
I can't seem to connect to my 3 network. In the strength meter on top, theres a ! sign. And there is no service for current network. When i try to find network manually, theres no 3 service.
Is my dopod 838pro bricked? It was working fine until it hanged and after i soft reseted it, it can't connect to the network anymore.
Is there any way i can fix it? I have just updated all the ROMS and Radio roms and am running wm6.
HERM100
IPL-1.04
SPL-2.10.0lipro
I upgraded my OS to wm6 using the link below as a guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=37&Itemid=26
Please help. Thanks
Hmmm... have you read the Sticky thread on bricks? This sounds like a problem I have seen in there. Probably easy to fix - first try flashing back to where you started. Read through the sticky - it will help you.
http://forum.xda-developers.com/showthread.php?t=286755
How long ago did you flash? Did it never work after flashing or did it work for a day, a week...? Need more info. I assume you verified that the SIM isn't the problem?
yes i have read the brick thread and have tried flashing it again but it didn't seem to work. i've also re-did the radio ROM as well.
I flashed and upgraded to wm6 after the network problem and it still doesn't seem to work.
I don't think it's the sim problem as it works with my other phone SE k800i. But i'll try changing the sim card and get a new one on monday.
I'm leaving the option of sending it to Teleplan as a last resort as it is quite a hassle to send the dopod all the way to sydney when i'm situated in Perth.
Anyone know a service center for dopod in Perth?
dopod 838pro
i'm not sure but when i use my optus sim card, it seems to work. but not with my 3 sim card.
louiedafly said:
I can't seem to connect to my 3 network. In the strength meter on top, theres a ! sign. And there is no service for current network. When i try to find network manually, theres no 3 service.
Is my dopod 838pro bricked? It was working fine until it hanged and after i soft reseted it, it can't connect to the network anymore.
Is there any way i can fix it? I have just updated all the ROMS and Radio roms and am running wm6.
HERM100
IPL-1.04
SPL-2.10.0lipro
I upgraded my OS to wm6 using the link below as a guide
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=37&Itemid=26
Please help. Thanks
Click to expand...
Click to collapse
Try starting up your phone with no sim card and see what happens, I think have the same problem, I can't use any other radio than 1.16, and even that may have problems. If I use any other radio roms, I get no service, and if I take out my sim, it doesnt even realize that there is no sim, it says no service, and also the phone will freeze on the today screen with half the plugins loaded.
BTW what radio are you using?
I get the same error with my 3 sim and the .41 radio rom.
I have upgraded and downgraded many times, never with a failure. I just upgraded to PDAVIET 4.0003. Went without a hitch but now my phone will not stay on the network, also it will every few minutes complain that there is no sim card. Card is fine as tested in my other phones. The interesting part is it functions fine on any 2.2 ROM.
Tried Smart1's True's and all PDAVIET, no WM6 allows the phone to work.
Cold resets don't resolve the issue. Is there something that could have gotten corrupted that is part of the phone OS and not in the ROM's?
I am at a loss to troubleshoot this issue.
Thanks for reading, any advice/suggestions is appreciated.
ron1n, what is the network protocol for your provider?
Do you use pap or chap, the setting choice in CommManager?
Is network set for auto in phone dialog?
In your connection settings, do you use Server assigned ip address or auto?
Since i have upgraded to PDAviet i have almost the same problem.
After soft-resetting my device no gsm connection is found.
The only solution is to go into phone option and start the manual search.
If it's connected it works without any problems.
Strange thing....I also tested a few gsm roms but always the same experience.
R0N1N said:
I have upgraded and downgraded many times, never with a failure. I just upgraded to PDAVIET 4.0003. Went without a hitch but now my phone will not stay on the network, also it will every few minutes complain that there is no sim card. Card is fine as tested in my other phones. The interesting part is it functions fine on any 2.2 ROM.
Tried Smart1's True's and all PDAVIET, no WM6 allows the phone to work.
Cold resets don't resolve the issue. Is there something that could have gotten corrupted that is part of the phone OS and not in the ROM's?
I am at a loss to troubleshoot this issue.
Thanks for reading, any advice/suggestions is appreciated.
Click to expand...
Click to collapse
Reflash Radio ROM (2.47.21 or 2.69.21 will work)
To reply to all of your suggestions. I have tried 5 different radio roms, none will see the phone network (GSM not GPRS) for more than a few seconds with a weak signal, then they fail and either go to flight mode or say that the SIM is missing. To reiterate, this was working fine up until yesterday with a few different WM6 ROM's. Coincidentally, the rear speaker failed at the same time. I resolved that issue, but the lack of phone service persists, although all AKU 2.2 ROM's work fine. Very curious....
DeviLduck said:
ron1n, what is the network protocol for your provider?
Do you use pap or chap, the setting choice in CommManager?
Is network set for auto in phone dialog?
In your connection settings, do you use Server assigned ip address or auto?
Click to expand...
Click to collapse
It is CHAP, although I am referring to the phone service not wireless GPRS. My network is configured for auto, although if I switch to manual (due to the lack of consistent conntection), it will not be able to see any networks, except briefly and intermittently.
Cheers
WM6 Sim Card issues [solution, use radio rom 2.19.21]
I've been using WM6 for awhile now, I've tried SMART1.3, PDAVIET 4.0.0.01, 4.0.0.0.3,4.0.0.0.3a and finally 4.0.0.0.4 .. but yesterday i tried to flash back to SMART1.3. After downgrading and upgrading, i got unknown sim status ! since yesterday , I've change my Radio Rom and OS ( I've tried almost everything ) but i can't get my phone to work in WM6 !! when i flash back to wm5 ( any AKU 2.2 version ) i have no problem with phone or GSM but as soon as I upgrade to WM6, I got unkown Sim status ... anybody , have any Ideas ?!!
Same Problem !
I have exactly the same problem !! it's not from radio ROM or OS !! I've tried 3 different version of radio ROM, and almost every single WM6 OS that is out there ! my phone stop responding yesterday after i changed my OS from PDAVIET 4.0.0.0.4 to SMART1.3 ! since then I've tried everything, but I can't get the phone to work in any WM6 OS! although WM5 (any version of it) is okay !
hma4 said:
I've been using WM6 for awhile now, I've tried SMART1.3, PDAVIET 4.0.0.01, 4.0.0.0.3,4.0.0.0.3a and finally 4.0.0.0.4 .. but yesterday i tried to flash back to SMART1.3. After downgrading and upgrading, i got unknown sim status ! since yesterday , I've change my Radio Rom and OS ( I've tried almost everything ) but i can't get my phone to work in WM6 !! when i flash back to wm5 ( any version) i have no problem with phone or GSM but as soon as I upgrade to WM6, I got unkown Sim status ... anybody , have any Ideas ?!!
Click to expand...
Click to collapse
Did it used to work?
Yes , it used to work ! I've been using WM6 for more than 2 weeks with no problem! recently I upgrade my os to PDAVIET 4.0.0.0.4, but I decide to change the OS back to SMART 1.3, after I changed it back, i got the error "Unknown SIM card , without the pin you can call emergency calls only" I tried my pin and PUK , but none works ! So i changed the OS to WM5 again. I've tried couple of different version of WM5 (JESTER, NVID) and I've found the phone works perfectly in wm5 !! as I said before I tried re-flashing my Radio ROM, but it didn't help !! i still can't get my phone to work in WM6 ! any of Pocket PC gurus, have any suggestion ?
S200 Gone Wacko with WM6 and I don't know why
Hello people
Okay so here is the situation, since about last week I have been using PDAViet 4.0.0.3 on my Qtek S200
Now I love this ROM..so much so that I spoon with it at night...um...crap lol Its fast and lite...but something went terribly terribly wrong yesterday
So around 1pm I disconnect my phone from my computer, and notice a "X" in the data connection arrows...okay I thought nothing of it. I go to a restaurant, get a phone call from my brother, and talk, and everything is fine. From there it went bonkers...it kept on trying to connect a GSM signal, and then would go out to no service...it would keep on trying and trying, and bogging down my phone....
So finally i got it stablize (with an EDGE data signal i thought) and of course a voice signal and went on my merry 2 hour drive back home to Montreal.
When I got to Montreal and was waiting in the dead moving traffic jam, I wanted to check the Windies cricket score on BBC, so I take out my phone and try to make a data connection. But again the X showed...i rebooted my phone and signal about 10 or 20 times, and finally got something...however by the time that happend I had arrived at home so i went and used my computer.
The GSM signal stayed, but I dont know if I had a data connection. I then went to a funeral, turned off my radio entirely, and then when I turn it back on...ooooooooo no signal...it would get 2 bars, and then drop, and then 2 bars "E" symbol, and then drop.
So from then on, i went nuts, opened up the back, took out the battery, checked the sim, installed another sim to make sure..and by now it went even worse..first INVALID SIM...then it went to MISSING SIM...urge to kill rising!
I finally said F it, and hard resetted my phone...but i noticed something upon the screen calibration..."NOTIFICATION ERROR...cannot find calnot.exe". After hard resetting and such, the problem still showed...
This morning, after leaving it overnight, it was still misbehaving...so I went to took it back down to the floating NVID file found here on XDA developers...and oddly enough...no more calnot.exe error...the radio signal is strong, and i get a data connection...So i tried to then upgrade to the new PDAViet 4.0.0.4s ROM, but again...calnot.exe error...so finally i am stuck at the NVID ROM...oy!
So I searched here on XDA Developers and on google...now while people have said they get the calnot.exe error, they also get this reglog.dll (or something to that effect) error as well...me on the other hand am only getting that calnot.exe error, which would seem to be the root of my problem.
What can I do fix this, and get back to the speedy 4.0.0.3 ROM (man I love that ROM)
Phone info:
ipl: 2.09
spl: 2.20.0000 (so I guess that my Qtek S200 is a G3 model)
radio: 02.47.21 (i even moved up to 02.69.21)
os: 2.20.7.34
so i really appreciate the help guys...take care...
*howls like a wolf*....nothing?
hofo_mofo said:
*howls like a wolf*....nothing?
Click to expand...
Click to collapse
Flash again the WM5 NoVid Rom,hard reset and if you come up with the same error,hard reset again... Tell me what happens... If it works flash PDAViet 4.0.0.0.3a...
Holy S*** I have the same Problem for like two weeks!!
Man , I have exactly the same problem !!! exactly !! i had PDaviet 4.0.0.0.4 and one day I got the same thing, No signal , then after i hard reset, the Calnot error ! then Hard reset again, and this time I got the replog error !
I get "Unknown Sim Card!" or "Unknow Sim Card status enter your pin" whenever I install WM6! My phone works perfectly in Wm5 though !!
I flashed radio rom in WM6, I also tried different sim Cards , but none works !I can not get the phone to work in wm6!
By the way, NVID is not a good rom to stay with.
tonydeli7 said:
Flash again the WM5 NoVid Rom,hard reset and if you come up with the same error,hard reset again... Tell me what happens... If it works flash PDAViet 4.0.0.0.3a...
Click to expand...
Click to collapse
Still the same thing...i have treid 4.0.0.0.3a, 4.0.0.0.3, 4.0.0.0.4, 4.0.0.0.4s, 4.0.0.0.4sse, and Mobiz 2.0b3.....all nothing...
Sometimes it would be calnot.exe notification error, or replog.dll, or now clocknot.exe error...so far only NVID works
hma4 said:
Man , I have exactly the same problem !!! exactly !! i had PDaviet 4.0.0.0.4 and one day I got the same thing, No signal , then after i hard reset, the Calnot error ! then Hard reset again, and this time I got the replog error !
I get "Unknown Sim Card!" or "Unknow Sim Card status enter your pin" whenever I install WM6! My phone works perfectly in Wm5 though !!
I flashed radio rom in WM6, I also tried different sim Cards , but none works !I can not get the phone to work in wm6!
By the way, NVID is not a good rom to stay with.
Click to expand...
Click to collapse
In a way I am glad you are having the same problem...so I know I am not a nut lol (and nor am I alone)...but of course its not good to relish in someones downfall, so of course it is also a bad thing eh..
What ROM would you suggest then? NVID seems alright, but I don't know of any others out there (well somewhat)...thanks!
I wish we knew why it happened at first place!
for wm5, if you want a clean, fast and reliable Rom, try Jesterz Rom
http://forum.xda-developers.com/showthread.php?t=284578
you might want to re flash the start-up image to HTC logo... you can find the .cap in the same thread.. I also updated the radio rom too, you can find it in prophet wiki.
Jesterz Rom is nice cause you don't have to uninstall anything, it's really clean and stable. it is by far better than NVID, but don't ask why cause i have to ramble a lot.
Oh by the way if you found out why this happened to us .. let me know
hofo_mofo said:
Still the same thing...i have treid 4.0.0.0.3a, 4.0.0.0.3, 4.0.0.0.4, 4.0.0.0.4s, 4.0.0.0.4sse, and Mobiz 2.0b3.....all nothing...
Sometimes it would be calnot.exe notification error, or replog.dll, or now clocknot.exe error...so far only NVID works
Click to expand...
Click to collapse
Try flashing PDAViet WM5 Temp
http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip PASSWORDDAVIET
or PDAMobiz WM5 Temp......
http://www.sharebigfile.com/file/178269/fantastic-b3-Step1-rar.html
and then try to flash truneytral's WM6 if you haven't already...
http://www.savefile.com/files/763142
If you don't want russian keyboard ,just follow DEVILDUCK's procedure here http://forum.xda-developers.com/showthread.php?t=302067&page=18
and follow the guide
http://forum.xda-developers.com/showthread.php?t=310452(just flash one of the above Wm5 temp roms,instead of NVid)
tonydeli7 said:
Try flashing PDAViet WM5 Temp
http://rapidshare.com/files/32728615/Prophet_PDAViet_Step1.zip PASSWORDDAVIET
or PDAMobiz WM5 Temp......
http://www.sharebigfile.com/file/178269/fantastic-b3-Step1-rar.html
and then try to flash truneytral's WM6 if you haven't already...
http://www.savefile.com/files/763142
If you don't want russian keyboard ,just follow DEVILDUCK's procedure here http://forum.xda-developers.com/showthread.php?t=302067&page=18
and follow the guide
http://forum.xda-developers.com/showthread.php?t=310452(just flash one of the above Wm5 temp roms,instead of NVid)
Click to expand...
Click to collapse
Okay, I spend another 2 hours to update the phone ! This time i didn't get the
Calnote.exe or replog error !! but my phone still doesn't work !
The phone connection is not stable ! it comes and goes ! and i get " Unknow SIM status. 3 attempts remaining. Only emergency calls can be made without a pin." well i tried different sim card , and i still get the same error !
HELPPPPPPPPP Pleaseeeeeee !
I just Upgraded my phone to ASreg3.3.12, and LvsW Aku2.3 and still doesn't work !!
I get the same error ! the Phone App doesn't function! I get Unknown Sim Status! I've tried NVID, and Jesterz Roms , both AKU 2 and both work fine !!
any suggestions ?
Strange, however, can you post which radio version you have when you switch roms ? it could a radio rom problem....
Hi!
long time viewer first time poster.
I have G4 CID LOCKED Cingular 8125 with mfrazzz's Crossbow Reloaded 1.7.1 I have wizard love Rom as Base.
I really tried hard to update (I guess it is really a downgrade) my original Radio from 02.25.11 to 2.19.11 but no matter what I do, it failed.
I tried with every romupdateutility_wizard_noid.exe i could find but I get the same result everytime.
ON PC: I get 260 Error (tried in two machines same error message)
and
On my Wizard: stuck in this 3 colored screen. I see 3 color screen with "RUU" in right upper corner and "USB" on left bottom with IPL/SPL version showing in red If i press reset button, it will boot back to mobile windows fine.
Can anybody help me?
My rest device info:
ROM Version: 2.18.0.0 WWE
ROM date:2/14/06
IPL/SPL: 2.25.0001
GSM:02.25.11
Protocol version? 4.1.13.12
ExtROM version: faria V5.0
My Downgrade
All I did was use the rom upgrade utility from the "wizard love rom" (the one that is in Italian) and the T-mobile radio rom listed in the Wiki.
Worked like a charm!
thanks for the reply..
but of course i tried that already.
i think error 260 is communication related issue. PC communicate perfectly with ActiveSync.. but when it reboot for the flashing to occur,it just get stucked as if pc is not communicating with the wizard.
is downgrade to 2.19.11 really worthy?
nic2mit said:
thanks for the reply..
but of course i tried that already.
i think error 260 is communication related issue. PC communicate perfectly with ActiveSync.. but when it reboot for the flashing to occur,it just get stucked as if pc is not communicating with the wizard.
is downgrade to 2.19.11 really worthy?
Click to expand...
Click to collapse
Is your device actually booting up? If so, just download one of the radio ONLY roms. It won't matter whether you have a CID locked phone or not and the radio ONLY rom will not touch the IPL/SPL.
Having said that, is there a reason why you want to downgrade to 2.19? Are you having missed calls issues?
Hi titus666,
I am having the same ROM and missed call issues too.Even when i am on a full coverage area my wizard signals seems to dropping,coming back,dropping ....
What could be the probalem .Any recommended Radio ROMS's.
Probably you read this already
xdawiz said:
Hi titus666,
I am having the same ROM and missed call issues too.Even when i am on a full coverage area my wizard signals seems to dropping,coming back,dropping ....
What could be the probalem .Any recommended Radio ROMS's.
Click to expand...
Click to collapse
A little bit off regarding your initial post but here´s good feedback on how both radios behave.
http://forum.xda-developers.com/showthread.php?t=312834
I've had some problems as well.
I used the tool that came in the download to downgrade to 2.19 (I am having missed calls problem) and it won't.
I'm using a Windows Vista and already did the whole thing to update drivers with the one given on the forum over here, yet, everytime I run the thing it crashes and then I have to go through it all over again.
Its like the driver just doesn't work anymore, even though I have tried "re-updating" it to the one that I downloaded here, unlike the real Roms this one just won't go throguh and wait for the 3 colored screen to come up, just freezes before.
Appologize for posting the thread twice... I wasn't sure if this goes to the Hermes or the Herald forum...
Hello All,
I recently got an ATT 8525 and I'm trying to use it with my T-Mobile (US) SIM. I was able to successfully unlock the SIM and CID with an util/rom I found on this site (I think the post was from Pof). And I also re-flashed the phone with the latest ROM available.
But after about 5-10mins of usage the signal dies and when I reboot it says No GSM. Looks like the Radio ROM gets corrupted. I tried just re-flashing the Radio ROM and that doesn't help either. It works for short while and again the signal dies.
And also, I'm unable to install any of the generic ROMs (Fantastic Mobiz, PVET 40005) Although I'm connected to Active Sync when I run the Step 1 (ROMUpdateUtility_NV_G3.exe), I get a ERROR [222] : DEVICE NOT RESPONDING. And when I run the step 2 directly (update_rom.bat) I get an cannot update itsutils.dll maybe in use error.
As you can tell I've been messing with phone a lot for a couple of days with no luck and my frustration level is kinda high
As of now here’s where I stand. I re-flashed the phone (Image: 3.62, Radio 1.50) and it’s on the “Tap the screen to set up your windows based mobile device” screen. I plan on leaving it on this screen until I can a good solution.
I would like to get rid of the ATT ROM and install one of those hybrid generic ROM that is not Carrier specific. Any help will be much appreciated. Share your ideas, I’m very experimental
Phone Details…
ATT 8525
HERM100
IPL: 1.04
SPL: 1.40.0 lipro
ok ur going all over the map here.. did u hardspl first? also pvet 40005 isnt a hermes rom.. um try hardspl first THEN flash to a new rom maybe once you successfully do that then try a new 3.62 rom.. i run austinsync buts its naked..just like i like my women. ha. but if ur looking for a full blown try fun_key's rom or blinkys.. these arent carrier dependent
hey man jakeypoo, Thanks for your reply. I kinda figured that I was all over the map.
Okay first appologize my ignorance. What is a HardSPL? I did a search on this forum and I found Hard-SPL-V7.zip. Is this a good version to use? Also when I run the exe, All options are grayed out except for "Force Using SSPL" and "Is it Hard-SPL". What do I select.
Thanks!
Hardspl v7 is the latest version out there, its the one for you to use so that you're safe from future mishaps.
I also have an 8525 on T-mobile... so no worries.
Hope this helps.
http://wiki.xda-developers.com/index.php?pagename=Hermes_HardSPL
still problems (no gsm)
Thanks whistler4ever. That link was really a great help.
Here's what I did...
1. Installed the Hard SPL version 6
2. Installed the latest ATT ROM (ver 3.62 radio: 1.54) I had to do this because the radio on the phone was corrupt (says "no GSM" on the start screen) and couldn't install just the radio rom. kept giving connection errors.
3. Installed Schap's WM6 Pro 3.57 hoping this would get ride of the ATT ROM and my intial problem (no GSM) will go away.
Everything was fine for like 15 mins, then my phone just froze. I reboot the phone and sure enough the radio ROM was gone (no gsm). ;(
Running out of ideas.
1. Could this problem be because I'm using a TMobile SIM on a ATT's radio ROM?
2. Is the radio ROM specific to the phone type and provider(ATT, TMO..)? Is there a generic WM 6 radio rom? If yes, where can I find the latest version?
3. Any bright ideas?
Thanks again!
Current phone details...
ATT 8525
HERM100
IPL: 1.04
SPL: 2.10
ROM 3.62
Radio: no gsm
I was able to flash just the radio ROM - version 1.51. But again after a few hours the Radio got currupted. I also tried to follow the instruction ( http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5 ) to use the mtty.exe utility, but I don't get a USB prompt. I get Cmd prompt and if I still enter the password, it says invalid password. please help!!!
And how do I do the USB monitor capture? I could post more details that way. I'm using my girl friend's old razr now and it's painful!
I have used my t-mobile sim on AT&T rom's and other roms with no problem. I would try going back to a factory rom and then changing back to a cooked rom just to confirm its all a clean install. also, try downgrading your radio to a 1.47 or 1.48 (those have been proved pretty reliable across many cell providers).
Thanks Whistler. I'm going to start with the 1.48 version and if that doesn't work I'll try the 1.47 version. Not giving up on this.
I found 1.47 to work very well with t-mobile even when traveling...
Thanks Galaxys. I just installed the 1.47 radio. I have fully signal and the 'E', but I can't receive or make calls.
It almost looks like my TMO SIM is not compatible with the 8525. It always works for the first few minutes after an install and then stops working.
I'm very certain the phone is in good condition.
Should I try an older radio version.. like a 1.24 or something ?
Can I install just the tmobile radio rom?
I'm also going to install TNT 2.0 pro so I have the exact same set up as you and see if that makes a difference.
no luck!!!
wow... after all this time and effort still no luck. There's got to be something very basic that I'm not doing right. Senior members any help???
I have spent a lot of time reading the wiki pages and dead hermes thread. Tried out a lot of suggestions listed.
try the way i posted in this thread http://forum.xda-developers.com/showthread.php?t=337125
ajjus said:
wow... after all this time and effort still no luck. There's got to be something very basic that I'm not doing right. Senior members any help???
I have spent a lot of time reading the wiki pages and dead hermes thread. Tried out a lot of suggestions listed.
Click to expand...
Click to collapse
Sounds like your doing everything right, because your flashed rom, radio, and Edge network are all functional. Since only the GSM calls don't work, I would go back to Tmobile and get a a new Sim card installed (they should do this for nothing & test it while at the store).
Also, if U got this device on ebay your IMEI could be blocked. see this thread:
http://forum.xda-developers.com/showthread.php?t=322587
Try to flash the entire UK T-Mobile ROM, then remove the internet settings and install the correct CAB for T-Mobile.
UK ROM here: http://forum.xda-developers.com/showthread.php?t=337163
PROVIDER SETTINGS CAB: http://forum.xda-developers.com/showthread.php?t=311446
a-h-t1, Junner2003 and galaxys - I'll try all your suggestions.
a-h-t1 - The first 2 steps went through fine. While I install the radio ROM as part of step 3, the installation doesn't go past 0%
I'm going try Junner2003 idea now. I'll keep everyone posted on my progress.
install stops at 11%
Hi Junner2003,
I was trying to istall the UK Tmo ROM you suggested and it stops always at 11%. I've had this problem with other ROMs as well (12%) but after a few tries the installatons goes past it, but real slow. Any ideas?
Thanks for sending me the links... very helpful!
galaxys said:
Sounds like your doing everything right, because your flashed rom, radio, and Edge network are all functional. Since only the GSM calls don't work, I would go back to Tmobile and get a a new Sim card installed (they should do this for nothing & test it while at the store).
Also, if U got this device on ebay your IMEI could be blocked. see this thread:
http://forum.xda-developers.com/showthread.php?t=322587
Click to expand...
Click to collapse
Hi Galaxys,
I don't think the IMEI is blocked. Or maybe it is, how do I find out? I don't have any of the symptons listed on the link you sent (don't hear the beeps or anything).
I originally had a T-Mobile wing. The LCD screen cracked (don't know how). And ofcourse TMo won't replace it.
http://forum.xda-developers.com/showthread.php?t=335346
I got 8525 from my company. It's almost new. Only used for a day on an AT&T SIM. This phone is free, and so I really don't have much to lose... so all out experimenting
Tried insalling from the micro card, even that stops while installing GSM. pissed!!! Why would the darn Radio not update???
this may sound stupid but if all else fails, why not...
my mda use to have signal then it would just disappear as well after 15 min or less..
turns out the sim card wasnt pressed in properly.. so i just put a piece of paper on top of the sim card to make it thicker and get the battery to press it down harder. and it solved all my problems...
just a suggestion..good luck
ajjus said:
Hi Junner2003,
I was trying to istall the UK Tmo ROM you suggested and it stops always at 11%. I've had this problem with other ROMs as well (12%) but after a few tries the installatons goes past it, but real slow. Any ideas?
Thanks for sending me the links... very helpful!
Click to expand...
Click to collapse
See this post here for a possible reason (and technical explanation/theory) for your device stalling during radio update. The fix suggestions at the bottom of the page may help you - in particular :
Try cooling the device down a bit before flashing as the PIC chip (where your radio ROM is held) may flash more reliably/easier when cool. Don't ask why - that's from it's datasheet ;-)
The paper on the SIM card is a good idea too to rule out dodgy SIM connection - Great idea r0mmel