Help!!! Froze At Startup!!!! - Mogul, XV6800 ROM Development

hey guys,
I tried to update the new custom ROM's, but after I ran the new SPL-unlocker (I installed dcd's new rom while at bootloader =))....now I stuck!!!! my phone won't connect to my activesync anymore....it just froze at i guess "startup"?.....have that silver symbol "htc," "smart mobility."
humnz what should i do now? is there anyway of fixing this problem? anyone know???
Thanks in advance guys...
ps. i understand what i did was a purely an idiotic thing....please pull me out of this mess...........

HellpppPp!!! anyone??? Pleaseeeee

I'd try flashing a different ROM. you could try doing the stock ROM, or you could try a custom one like DCDs.
did you run "titanunlocker.bat" and follow all the instructions?
I think if you hold down the power and camera buttons when you hit reset it will come up and the multi-colored boot screen and you can reflash from there.
I could be mistaken on the key sequence. do a search, I bet you can find it if that don't work.

Thread Close!!!!
Thanks For The Help....

OK I got this too on 6.1 the first time.
Listen.
Turn off allow bt connection and actviesync autoconnect when first connected under connection settings.
Put your phone back into bootloader 2.4 and then flash DCD's rom again.
Let us know if that doesn't work.

oops forgot last part.
After successful Flash ... Re-check options you un-checked.

if its hanging at the splash you dont have all parts installed. spl, rom, AND RADIO

Related

Mogul is Freezing after new rom update

I have installed the rom update on my mogul. everything went ok on the installation. once the phone was done with update it restarted. It loads the "HTC smart mobility" logo and it just freezes. Can some please help me recover my mogul back?
Just put the stock rom back on. Install from SD card if you have to, but i think you can install from windows if you put it in BL mode. maybe....
could you give me a step by step direction guide?
killerrdogg said:
I have installed the rom update on my mogul. everything went ok on the installation. once the phone was done with update it restarted. It loads the "HTC smart mobility" logo and it just freezes. Can some please help me recover my mogul back?
Click to expand...
Click to collapse
I am having the EXACT same issue. I went from the 2.17 rom to the new DCD 2.0 rom, but now I'm stuck on the bootloader screen.
I first used Titanunlocker, then followed directions and did the RUU. Then I flashed the DCD rom. Am I missing something?
Thanks all in advanced
yupyup said:
I am having the EXACT same issue. I went from the 2.17 rom to the new DCD 2.0 rom, but now I'm stuck on the bootloader screen.
I first used Titanunlocker, then followed directions and did the RUU. Then I flashed the DCD rom. Am I missing something?
Thanks all in advanced
Click to expand...
Click to collapse
Answered my own question
I did not run the new radio. So now every time I try to align my screen it reboots. Anyone know?
i had the same problem between flashing the rom and the radio. just put the mogul into bootloader mode (power on while holding camera button) and flash the radio.
same problem. got it working by flashing radio and rom. the radio's and rom need to be compatible or else it'll still give the same problem. did radio 3.17 and dcd 2.0
no luck
johto said:
i had the same problem between flashing the rom and the radio. just put the mogul into bootloader mode (power on while holding camera button) and flash the radio.
Click to expand...
Click to collapse
I tried holding the Camera button while pressing the power button but it does nothing.
I tried taking out the battery and holding the camera button while pressing the power button to startup the phone that was as well.
Any help would be appreciated. I'll contiunue searching but I'm starting to get scared.
EDIT = Nevermind...I'm an idiot. I just had to hold down the power and camera button while restting the phone to get back into the bootloader...just like everyone has told me in the writeups.
It worked
Thanks you all for your comments, I was able to reinstall Windows Mobile with the method above. My phone was freezing at start up all the time and I couldn't connect to my pc but now it works
http://forum.xda-developers.com/showthread.php?t=392133
Here is the link to the compatability list.

HELP !!

I'm stuck on the screen that says SPL-1.20.01 Olipro did I brick it ? please help!
No, it is not bricked. You should just have to flash the Titan Unlocker, refer to this thread->http://forum.xda-developers.com/showthread.php?t=423177
That should get you going. After that you will need to flash a rom with radio.3.4+ (perferably 3.42.50), or flash the radio, then flash the rom.
If that doesn't resolve your issue just search for Titan Relocker
Thank you !! greatly appreciate it trying it now
theintrospect said:
No, it is not bricked. You should just have to flash the Titan Unlocker, refer to this thread->http://forum.xda-developers.com/showthread.php?t=423177
That should get you going. After that you will need to flash a rom with radio.3.4+ (perferably 3.42.50), or flash the radio, then flash the rom.
If that doesn't resolve your issue just search for Titan Relocker
Click to expand...
Click to collapse
Dude I dont want to be mean to you but I have noticed the past couple days you jumping right in.. With knowledge or not.. What are you trying to do? Your answer is wrong as the User states that he is stuck in bootloader, to flash a bootloader needs to be done from a functioning OS.. Also by the looks of his bootloader it was never unlocked so how could he use the re-locker?
There are far more steps then just flashing an unlocked bootloader from where he is at in stuck bootloader. He may need to run ExitBootloader before trying anything depending on if he can reset the phone and it doesnt go right to bootloader (that would mean stuck bootloader)
Hint * Exitbootloader fix (if stuck in bootloader meaning even a reset will not get out of it), then Branded Carriers Stock ROM (User should know if it was GPS or not), then Olipro 2.40 Unlocked bootloader, then Custom ROM and GPS Radio.
Thank you Ryan ! I'll search for exit bootloader now ...
suhas2000 said:
Thank you Ryan ! I'll search for exit bootloader now ...
Click to expand...
Click to collapse
Here I cringe and wince to have to post this link at ppc dorks but its the first thing I found with easy instructions. Read the part about the titan, disable usb connections by right clicking active sync icon in taskbar and then plug the phone in after putting into bootloader (i know its stuck, just do it anyways, power + camera + reset button for couple seconds) Then run the Exitbootloader.
http://forum.ppcgeeks.com/showthread.php?t=9229
Then from there follow my previous instructions, you need to put the Stock ROM back on the phone whatever carrier its branded to. Then while in the Stock ROM's OS re-enable active sync connections and plug the phone in and make sure its synced and working properly. Then flash the Olipro 2.40 bootloader. Then while the phone is still in the olipro 2.40 bootloader flash the Custom ROM you want to use and then the GPS Radio. Perform a hard reset and pull the battery for a couple minutes. Then you should be set to jet.
Ok I think I rushed into it without waiting for your advice & now I'm out of the first screen but stuck in htc mobility/ no radio screen.. wtf ? am I that dumb ?
It keeps saying that my device is not connected to the PC... I made sure about the USB option in active sync & stuff... pls help
suhas2000 said:
Ok I think I rushed into it without waiting for your advice & now I'm out of the first screen but stuck in htc mobility/ no radio screen.. wtf ? am I that dumb ?
Click to expand...
Click to collapse
Make sure you are using Active Sync 4.5 and not using a Hub. Make sure to plug the USB cable into a main port on the PC. While the phone is unplugged. Manually put the phone in bootloader (power + camera + reset "little hole near memory card slot" buttons for couple seconds and release), make sure the active sync usb connections are disable from active sync connection settings on your PC's taskbar. Then plug in the phone (while in bootloader in to computer) and flash your Stock Branded Carriers ROM by running the Rom Update Utility EXE, RUU or exe however it comes. Once that is done you can unplug the Phone and let it boot up customize and all. Then re-enable the active sync usb connections in connection settings (PC Taskbar Active sync icon) and plug the phone in. Should sync up. Icon will turn green. Now flash the Olipro 2.40 bootloader and let it do its thing make sure to pay attention. When it is done it will still be in bootloader, then you can go ahead and flash your Custom GPS Titan ROM and GPS Titan RADIO followed by a hard reset and battery pull for a couple minutes.
You're a great teacher.. awesome step by step instructions... after all this, I think I'm gonna stick with the stock ROM ... so much for the flashing & all that !
I'll keep you informed about the progress .. thanks a million !!
It did it again ! at 11 % it stops & goes back to that original SPL 1.20.Olipro screen what am I dong wrong ? I feel such an idiot !
suhas2000 said:
You're a great teacher.. awesome step by step instructions... after all this, I think I'm gonna stick with the stock ROM ... so much for the flashing & all that !
I'll keep you informed about the progress .. thanks a million !!
Click to expand...
Click to collapse
No problem, well if you stay with the stock ROM stop before the Olipro 2.40 bootloader. That is for GPS ROM's only.
So if you are a little nervous and wish to remain stock follow my instructions up until the Olipro 2.40 part.
If you wish to continue and go the Custom ROM route thats up to you. Just remember if switching Carriers you need to Load PRL, Do PST and QPST settings. Plus the Custom ROM may need a Carrier CAB installed and registry edits for MMS. With my Custom ROMs you do not need Carrier cab or registry edits (but you still need to do PST/QPST and PRL) . I have 5 carriers to choose from right now for example.
suhas2000 said:
It did it again ! at 11 % it stops & goes back to that original SPL 1.20.Olipro screen what am I dong wrong ? I feel such an idiot !
Click to expand...
Click to collapse
If you are using Windows XP, Try installing these drivers to your Computer, restart your Computer, make sure you are plugged in to only a main port on the pc, unplug every other usb device just to make sure. and go over the steps again. You may need to pull the battery and let it sit for awhile, then put the battery in (do not power up) and charge for a little bit. Then try again.
Thanks for your patience ..greatly appreciated !
suhas2000 said:
Thanks for your patience ..greatly appreciated !
Click to expand...
Click to collapse
No problem, I am pretty sure the Stock ROM you need to flash has to be NON GPS as per the bootloader that is on there now. Just making sure you know that.
Ok all I want is to get the GD my sprint stock 3.56 ROM back on.. but it only goes till 11 % & stops ..what the hell am I doing wrong ? Ryan you don't understand how much I admire your patience with dummies like me !
suhas2000 said:
Ok all I want is to get the GD my sprint stock 3.56 ROM back on.. but it only goes till 11 % & stops ..what the hell am I doing wrong ? Ryan you don't understand how much I admire your patience with dummies like me !
Click to expand...
Click to collapse
Try an earlier NON gps stock sprint ROM.
I'm so sick of looking at that SPL 1.20 screen... lol can we start from scratch again pls ? I know it is annoying
I tried to flash to sprint stock 3.35 which is the older 6.0 rom.. still it too stopped after 11% ... what's the matter ? Ryan pls help !
suhas2000 said:
I tried to flash to sprint stock 3.35 which is the older 6.0 rom.. still it too stopped after 11% ... what's the matter ? Ryan pls help !
Click to expand...
Click to collapse
3.35 is still GPS. You need the NON GPS Sprint ROM.

[Q] I need help my phone won't load up after HTC screen what to do?

I need help my phone won't load up after HTC screen!
what can i do ? : (
Did you flash anything prior to this problem or even install a program or tweak the registry?
i flashed a rom..
i tried hard rest.
nothing works.
but i think i did a mistake ,Full TMOUS Compatible with 576 RAM + 1 GB Storage and i have normal HD Leo..
can that be the reason?
The problem is if you have a TMOUS and flash a non TMOUS compatible ROM or even worse a .51 Radio. There is no problem the other way.
Did you HSLP flash your phone first?
The ROM you are flashing, unless it is a stock one (ie from HTC) does not include a Radio ROM. These custom ROMs will specify what Radio ROMs work with their ROMs. These Radio ROMs have to be flashed first, although if you go into bootloader mode (Hold Volume-down button and switch on), then connect and flash the correct Radio ROM.
yes i have HSLP 2.08 .
and i also installed radio rom 2.12.50 before flashing to the rom.
the rom is VBNROM▐ Aug 16 - RC5.5 Android Compat▐ BLACK/GTX▐ 21915/24623▐ Test 23129/23569▐
and i have a European leo version not the american.
so can that be a problem?
so u say i can do the hold down and power then i can install a new rom?
fred_up
thanks i did the Down Vol And power and flashed to a new rom.
and works ^^ thank u so much
From the VBNROM ROM Thread
v-b-n said:
....
Btw...I do not recommend 2.12.xx radio with my ROMs due to RIL compatibility...they may work fine but are not a perfect match
....
Click to expand...
Click to collapse
oh i see that's y it didn't work probably.
Please Can someone help me, I had a friend help me flash my HD2 because I had a dutch version ROM and I really didn't know how to do it myself and it seem working fine not until I got a call but couldn't answer it and the phone got stuck. Each time I reset it wouldn't help, it will gets stuck at htc and won't load up. I did a hard reset and it loaded up but when I tried calling it got stuck again. This morning I tried to flash a new ROM from CleanEX DsE Core ROM Series (6.5.X ManiMore) every thing seems going on well during synchronization from computer. it showed the last ROM being (Miri_HD2_WM65_21914_Sense25_V18.0). But now the phone wont get to a complete start up. I cant hard reset it any more since it keep continuing from the same htc screen spot before battery removal, not giving me the chance to hard reset from power down mode. when I soft reset it once, it got to the point when it ask for my pin code but it went back to the htc screen mode again before completion. now I cant do any thing just staring at the htc screen.
He first flashed the ROM with HSPL. I saw something like SPL 1.42 SPL 1.42.HSPL on the reset screen. Is this suppose to be the correct HSPL number? and how can I go about this, I need all the help please.

[Q] HD2 Bricked??? after task29

hello folks,
first off thanks to all the people who help make this forum better and better.
have used you're help a few times especially trying to flash a rom. but now there's a problem... I've installed artemis Rom a couple of times but I wanted the newest so I've downloaded it, flashed my hd2 with task29 like always. pressed vol. down button it restarted until white boot screen. ok, possible, so I reset it and press vol. down again. but still white boot screen. after trying it for 70(!) times. I used the forum. saw that maybe hooking it up to pc and starting custom rom .exe should work. but no. wont even start when hooked to a computer. so please help!
Info:
Cotulla hspl 1.42.00
Task29 by dooloop performed( got stuck after that)
Rom Artemis. 31.5 (current) 35.1 (wanted to install.
Thanks In Advance
Maajelvv
Two possibility's;
Tray to do a hard reset,
Ore tray to install Stock Rom!
tried hard reset. (pulled out battery waited 20 sec. then put it back in. pressed vol. down and power button.) didn't work for 30 times...
have put leoimg.nbh on sd card. but can't get to the tri-colour bootloader so can't install anything...
Thanks for you quick response by the way.
If I get into bootloader there should be no problem but I can't get there :S
I'm out off Idea; tray to send Sir Sternas a PM with your question, maybe he get some Ideas; ore tray to ask this question on the Artemis Thread, there are also helpful peoples out there!
Edit; I just add your question on the Artemis thread!
http://forum.xda-developers.com/showthread.php?p=8450678#post8450678
you haven't made hard reset. if you wont to do hard reset you have to press both volume buttons and then pres power buton ( or press red button near batery ).
also try to make a goldimage ( search the forum ).
regards
Maajelvv said:
tried hard reset. (pulled out battery waited 20 sec. then put it back in. pressed vol. down and power button.) didn't work for 30 times...
have put leoimg.nbh on sd card. but can't get to the tri-colour bootloader so can't install anything...
Thanks for you quick response by the way.
If I get into bootloader there should be no problem but I can't get there :S
Click to expand...
Click to collapse
As Luka1111 said, you haven't done a hard reset. Check this out:
http://www.smartphonegurus.com/forums/topic/8829-hd2-how-to-soft-reset-hard-reset-and-place-in-bootloader-mode/
Dmm;
That I didn't see/read it correctly the way he did a hard reset??
I think it is HSPL 1.42 or an old RADIO-ROM.
System specs for Artemis are SPL 1.66 or above and RADIO 2.07.51.22_2 or above.
Install newest Stock ROM with the mentioned versions or flash HSPL and RADIO manually.
Best regards
Uli
Sorry, have not read you can't access tricolor bootloader. Have you tried without SIM and SD? If not try to flash HSPL and RADIO without SIM and SD.
Maajelvv said:
tried hard reset. (pulled out battery waited 20 sec. then put it back in. pressed vol. down and power button.) didn't work for 30 times...
have put leoimg.nbh on sd card. but can't get to the tri-colour bootloader so can't install anything...
Thanks for you quick response by the way.
If I get into bootloader there should be no problem but I can't get there :S
Click to expand...
Click to collapse
What´s the size of your SD-Card? Flashing from SD works only with max. 8 GB - Card, 16 GB or more won´t work! (Own experience!)
Can you connect your device to ActiveSync? Or otherwise stated: What happens when you connect your device to your PC? Does ActiveSync or Windows Mobile Device Center even startup?
BTW, what happens when you start your device now? Does it hang or just load your old Artemis version??
regards, Kuzibri
uli71 said:
I think it is HSPL 1.42 or an old RADIO-ROM.
System specs for Artemis are SPL 1.66 or above and RADIO 2.07.51.22_2 or above.
Install newest Stock ROM with the mentioned versions or flash HSPL and RADIO manually.
Best regards
Uli
Sorry, have not read you can't access tricolor bootloader. Have you tried without SIM and SD? If not try to flash HSPL and RADIO without SIM and SD.
Click to expand...
Click to collapse
Hi Uli,
the poor man cannot enter bootloader mode and, as I understand from his posts, not connect to his PC. So how can he flash HSPL and/or Radio? There must be something fundamentally wrong with his device, but I also had a similar problem a few weeks ago and, although it took a lot of time, I managed to get it to work again.
BTW, as I already mentioned SPL 1.42 is not the problem.
regards, Kuzibri
kuzibri said:
Hi Uli,
the poor man cannot enter bootloader mode and, as I understand from his posts, not connect to his PC. So how can he flash HSPL and/or Radio? There must be something fundamentally wrong with his device, but I also had a similar problem a few weeks ago and, although it took a lot of time, I managed to get it to work again.
BTW, as I already mentioned SPL 1.42 is not the problem.
regards, Kuzibri
Click to expand...
Click to collapse
Hey Kuzibri, You are absoluteley right. I get no connection true active sync or anything. I'm pretty sure there's something really wrong here. never had this problem before. btw I've mistaken with
my spl version. it's the one Sir Sternas recommended. Spl 1.66 HSPL.
I'm Really confused right now. and Pissed off at the same time...
I mean I loved my HD2 with Artemis Rom close to beeing perfect.( installed Igo8 witch right before I went on holliday, stopped working but mannaged to get TomTom navi to work ) then suddenly my answer button stopped working. so I figured let's install a new Version of Artemis rom. I backed up all my files using microsoft my phone. then used task29. done. So I tried to get to the bootloader.... Nothing. tried attatching it to the pc and hoping it would start if I pressed the custom rom .exe (Read somewhere id might work) Nothing not even a blank screen for startup. now I've got nothing else I can think of. please, U guys have given me so much good suggestions.
Thank you all for your time and your efforts to help me solve this issue.
Maajelvv
kuzibri said:
Hi Uli,
the poor man cannot enter bootloader mode and, as I understand from his posts, not connect to his PC. So how can he flash HSPL and/or Radio? There must be something fundamentally wrong with his device, but I also had a similar problem a few weeks ago and, although it took a lot of time, I managed to get it to work again.
BTW, as I already mentioned SPL 1.42 is not the problem.
regards, Kuzibri
Click to expand...
Click to collapse
Maajelvv said:
Hey Kuzibri, You are absoluteley right. I get no connection true active sync or anything. I'm pretty sure there's something really wrong here. never had this problem before. btw I've mistaken with
my spl version. it's the one Sir Sternas recommended. Spl 1.66 HSPL.
I'm Really confused right now. and Pissed off at the same time...
I mean I loved my HD2 with Artemis Rom close to beeing perfect.( installed Igo8 witch right before I went on holliday, stopped working but mannaged to get TomTom navi to work ) then suddenly my answer button stopped working. so I figured let's install a new Version of Artemis rom. I backed up all my files using microsoft my phone. then used task29. done. So I tried to get to the bootloader.... Nothing. tried attatching it to the pc and hoping it would start if I pressed the custom rom .exe (Read somewhere id might work) Nothing not even a blank screen for startup. now I've got nothing else I can think of. please, U guys have given me so much good suggestions.
Thank you all for your time and your efforts to help me solve this issue.
Maajelvv
Click to expand...
Click to collapse
Hey guys,
maybe you haven't read my whole posting: Have you tried to get access to tricolor bootloader without pluged in SIM and SD?
If you had trouble with your answer button before flashing, is it possible your volume button is also without function? Therefore it seems to be a hardware problem.
Sorry, if this is not the answer you would like to read, but the advise to test without pluged in SIM and SD is my last. Entering bootloader is a basic system feature, as far as I know.
Best regards,
Uli
Maajelvv said:
Hey Kuzibri, You are absoluteley right. I get no connection true active sync or anything. I'm pretty sure there's something really wrong here. never had this problem before. btw I've mistaken with
my spl version. it's the one Sir Sternas recommended. Spl 1.66 HSPL.
I'm Really confused right now. and Pissed off at the same time...
I mean I loved my HD2 with Artemis Rom close to beeing perfect.( installed Igo8 witch right before I went on holliday, stopped working but mannaged to get TomTom navi to work ) then suddenly my answer button stopped working. so I figured let's install a new Version of Artemis rom. I backed up all my files using microsoft my phone. then used task29. done. So I tried to get to the bootloader.... Nothing. tried attatching it to the pc and hoping it would start if I pressed the custom rom .exe (Read somewhere id might work) Nothing not even a blank screen for startup. now I've got nothing else I can think of. please, U guys have given me so much good suggestions.
Thank you all for your time and your efforts to help me solve this issue.
Maajelvv
Click to expand...
Click to collapse
Hi,
I have send you a PM. Please read this ASAP!!
regards, Kuzibri
Hey Uli,
I've tried both. with and without sim or SD cards. still no functioning....
I've thought about the fact that it might be broken but it worked right before flashing....
thanks for your efforts though..
Maajelvv
As I already mentioned, this poor guy has a major problem with his device, which seems to be hardware related (either volume down button does not work or the on/off key). After having extensive contact with him by phone, the only solution seems to be to bring it back to the store to let it repair. Unfortunately, he will have a great chance to loose his warranty, because HTC probably will be able to found that there is another ROM installed. Whish Maarten good luck with his problem!! Also very sorry I could not help you to solve your problem. I'm personally very disappointed by that!
regards, Kuzibri

Please help

Hey, i tried to install android on my HD2 several times and failed, but then i noticed i had wrong version of hspl so i couldn't start MAGLRD (i had 3.03 i think i should've had 2.08 right?) Anyway i then tried to remove the HSPL by formatting my sd card and putting the file from original rom (i don't remember the name) and renaming it to LEOIMG, it started installing the rom i went to another room, when i came back it had finished and was on the red/blue/green screen and it said update failed and i had to retry, but now none of the exes work like rom updates or task29 nothing. when i turn on the phone it says "Not allow" and then goes to the red/blue/green screen. Please help me, I'm freaking out is there any way to fix it? Is there even a way to access SD card when the phone does this?
TomaToz, use the computer to flash via USB cable.
I can't, none of the rom updates or ANYTHING works since this, they all give errors
go to the magLDR page and look for how to remove it.
then start from scratch
There's no info how to remove it but even if there was how would i? None of the exes work and i can't turn the phone on, also i dont think MAGLRD got installed cause i had HSPL 3.03 instead of 2.08
Come on isn't htere anyone who ca help me? :|
are you sure you haven't bricked your phone?
because it just seems you did :/
I don't think you read the bold "You need HardSPL 2.08 before installation!" just above the history?
anyway, can you not flash a radio via USB as well?
also, if you post the error messages you get maybe we can help you more.
you can also check here:
http://forum.xda-developers.com/showthread.php?p=10275463
What does bricked mean? :9
and no i can not flash radio or anything else, i'll edit this message with a picture of what the error message looks like
EDIT: WOW, i tried to run the hspl installation and installed hspl 2.08 successfully, not i turned my phone on and its the screen where you choose to start the update for rom. This is the update after which my hd2 said "Update failed" so I'm scared to take any steps, please respond and tell me what to do
HOLY FREAKING CRAP! I installed android and everything seems to work fine, i can't tell you how relieved i am :]]]]
That's for your attention
Does anyone know where to get apps for Android 2.3.2?
What i installed is TyphooN_CM7_v3.5.9-MAGLDR
Help please!!! Hd2 stuck !
HI to all!my phone was working great until i decided to try a new rom so I installed task29 (i had elegancia rom but i wanted to try another rom)and now im stuck on the htc logo screen that says 'stick together' in a red square.....i tried vol down+power button to go into bootloader but nothing happens, then i tried to hard reset but still nothing happens...i pushed the reset button and i did it all over again at least 3 times but still nothing... is there anything else i can try? (even on the hardware?)
my HD2 is a T-MOBILE usa with :
radio 2.08.50.08_2
2.08.HSPL
3.14.531.1 elegancia rom(http://forum.xda-developers.com/showthread.php?t=651729)
i love my hd2 and i want it back...PLEASE HELP!!!!!!!
THANK YOU in advance!!!
sofialoca, task29 is not a thing to be "installed". It's a flash formatting. So you did everything correctly and deleted all from your phone except.. hmmm... stick together.
To flash other rom - just press Volume Down and push reset (under the battery cover) KEEPING VOLUME DOWN PRESSED. Keep it pressed until you are again in bootloader mode. Then connect USB and flash whatever you want.
thank you Andrew!I found the problem...
AndrewSh said:
sofialoca, task29 is not a thing to be "installed". It's a flash formatting. So you did everything correctly and deleted all from your phone except.. hmmm... stick together.
To flash other rom - just press Volume Down and push reset (under the battery cover) KEEPING VOLUME DOWN PRESSED. Keep it pressed until you are again in bootloader mode. Then connect USB and flash whatever you want.
Click to expand...
Click to collapse
thank you so much for the quick response! the problem was with my volume down button...i opened up the phone and moved the flex ribbon a bit to get it into place .after that it got in bootloader mode succesfully!im now back with elegancia and never gonna change it...i think i got a little greedy...afterall elegancia rom is great!thank you Miri and Steve0007 for this great rom and thank you again Andrew!
TomaToz said:
HOLY FREAKING CRAP! I installed android and everything seems to work fine, i can't tell you how relieved i am :]]]]
That's for your attention
Click to expand...
Click to collapse
glad it worked out in the end

Categories

Resources