Mogul is Freezing after new rom update - Mogul, XV6800 ROM Development

I have installed the rom update on my mogul. everything went ok on the installation. once the phone was done with update it restarted. It loads the "HTC smart mobility" logo and it just freezes. Can some please help me recover my mogul back?

Just put the stock rom back on. Install from SD card if you have to, but i think you can install from windows if you put it in BL mode. maybe....

could you give me a step by step direction guide?

killerrdogg said:
I have installed the rom update on my mogul. everything went ok on the installation. once the phone was done with update it restarted. It loads the "HTC smart mobility" logo and it just freezes. Can some please help me recover my mogul back?
Click to expand...
Click to collapse
I am having the EXACT same issue. I went from the 2.17 rom to the new DCD 2.0 rom, but now I'm stuck on the bootloader screen.
I first used Titanunlocker, then followed directions and did the RUU. Then I flashed the DCD rom. Am I missing something?
Thanks all in advanced

yupyup said:
I am having the EXACT same issue. I went from the 2.17 rom to the new DCD 2.0 rom, but now I'm stuck on the bootloader screen.
I first used Titanunlocker, then followed directions and did the RUU. Then I flashed the DCD rom. Am I missing something?
Thanks all in advanced
Click to expand...
Click to collapse
Answered my own question
I did not run the new radio. So now every time I try to align my screen it reboots. Anyone know?

i had the same problem between flashing the rom and the radio. just put the mogul into bootloader mode (power on while holding camera button) and flash the radio.

same problem. got it working by flashing radio and rom. the radio's and rom need to be compatible or else it'll still give the same problem. did radio 3.17 and dcd 2.0

no luck
johto said:
i had the same problem between flashing the rom and the radio. just put the mogul into bootloader mode (power on while holding camera button) and flash the radio.
Click to expand...
Click to collapse
I tried holding the Camera button while pressing the power button but it does nothing.
I tried taking out the battery and holding the camera button while pressing the power button to startup the phone that was as well.
Any help would be appreciated. I'll contiunue searching but I'm starting to get scared.
EDIT = Nevermind...I'm an idiot. I just had to hold down the power and camera button while restting the phone to get back into the bootloader...just like everyone has told me in the writeups.

It worked
Thanks you all for your comments, I was able to reinstall Windows Mobile with the method above. My phone was freezing at start up all the time and I couldn't connect to my pc but now it works

http://forum.xda-developers.com/showthread.php?t=392133
Here is the link to the compatability list.

Related

Help!!! Froze At Startup!!!!

hey guys,
I tried to update the new custom ROM's, but after I ran the new SPL-unlocker (I installed dcd's new rom while at bootloader =))....now I stuck!!!! my phone won't connect to my activesync anymore....it just froze at i guess "startup"?.....have that silver symbol "htc," "smart mobility."
humnz what should i do now? is there anyway of fixing this problem? anyone know???
Thanks in advance guys...
ps. i understand what i did was a purely an idiotic thing....please pull me out of this mess...........
HellpppPp!!! anyone??? Pleaseeeee
I'd try flashing a different ROM. you could try doing the stock ROM, or you could try a custom one like DCDs.
did you run "titanunlocker.bat" and follow all the instructions?
I think if you hold down the power and camera buttons when you hit reset it will come up and the multi-colored boot screen and you can reflash from there.
I could be mistaken on the key sequence. do a search, I bet you can find it if that don't work.
Thread Close!!!!
Thanks For The Help....
OK I got this too on 6.1 the first time.
Listen.
Turn off allow bt connection and actviesync autoconnect when first connected under connection settings.
Put your phone back into bootloader 2.4 and then flash DCD's rom again.
Let us know if that doesn't work.
oops forgot last part.
After successful Flash ... Re-check options you un-checked.
if its hanging at the splash you dont have all parts installed. spl, rom, AND RADIO

Sprint Mogul. Botched ROM flash, won't connect to ActiveSync

I decided to look at DCD's rom to get GPS working. I was told I needed to unlock it first and was sent "Hard-SPL-MFG.exe" which I think loaded Oli Pro 2.40.
I got to the point where I said I could load another ROM if I wanted to and ran DCD's 2.2.3 ROM for sprint. It appeared to go fine, but when I boot it just sits at the Sprint logo. ActiveSync doesn't see the phone either, which prevents me from trying anything again.
Did you flash the Radio to 3.27?
http://forum.xda-developers.com/showthread.php?t=362563
I unlocked using Hard-SPL-MFG.exe, then flashed the radio to 3.27, then flashed DCD's 2.2.0 rom followed by a soft reset.
If you get stuck and need to get back to the bootloader, hold down the camera and power button while performing a soft reset with the stylus.
Sinosec said:
ActiveSync doesn't see the phone either, which prevents me from trying anything again.
Click to expand...
Click to collapse
This part is solvable. You can put the phone into bootloader mode again by holding the Power & Camera buttons while resetting with the stylus. Then you can connect via USB & reflash.
drew826 said:
This part is solvable. You can put the phone into bootloader mode again by holding the Power & Camera buttons while resetting with the stylus. Then you can connect via USB & reflash.
Click to expand...
Click to collapse
This doesn't work. It says there's no device connected, even though the phone shows USB once I plug it in.
And I didn't know what a Radio is. Apparentely I'm supposed to flash that after I do the ROM, but the ROM didn't work.
did you try a hard reset?
Sinosec said:
This doesn't work. It says there's no device connected, even though the phone shows USB once I plug it in.
And I didn't know what a Radio is. Apparentely I'm supposed to flash that after I do the ROM, but the ROM didn't work.
Click to expand...
Click to collapse
are you checking with activesync or the radio updater? activesync wont see the phone in bootloader mode, however if you try to flash the radio rom it should flash
OK, I just had to reset it before going back into the bootloader. The OEM ROM loaded fine, so I'll try again.
What is a radio anyway? I have a 3.27.00.exe. What's that going to do if I load it?
Sinosec said:
What is a radio anyway? I have a 3.27.00.exe. What's that going to do if I load it?
Click to expand...
Click to collapse
The radio is the hardware that controls all radio-wave communication from your device: cell service, wifi, gps service, and bluetooth. When we talk about radios here, we're referring to the software for the radio hardware. You're downloading a new firmware, or a new operating image for the hardware, that changes its capabilities.
When you run the 3.27.00.exe file, that will upgrade your radio's software version to tell it how to communicate with GPS, plus whatever other changes were made.
I tried this again, this time loading the 3.27 radio after the bootloader. It flashed, but when booting it just sits at the "HTC smart mobility" logo.
I tried to load DCD's ROM from the bootloader but got error 260 cause there's no ActiveSync connection, I'm guessing.
can someone point me to old unlocker (sprint mogul)? i'm facing problems with powersave/sleep mode issues on 2.17
Boot loader
drew826 said:
This part is solvable. You can put the phone into bootloader mode again by holding the Power & Camera buttons while resetting with the stylus. Then you can connect via USB & reflash.
Click to expand...
Click to collapse
Thank you Soo F-ing Much Bro

help!! my bell htc 6800 stuck with new rom.

I flashed my htc 6800 to dcd's titan rom 2.2.3. and then it stuck at blue "bell" screen. I tried soft and hard reset, even pulled out the battery. still not working. and nothing happen when i plug in usb cable to it. help plz.
DunyaX said:
I flashed my htc 6800 to dcd's titan rom 2.2.3. and then it stuck at blue "bell" screen. I tried soft and hard reset, even pulled out the battery. still not working. and nothing happen when i plug in usb cable to it. help plz.
Click to expand...
Click to collapse
Did you upgrade the radio to 3.27? Make sure to follow the directions or this will happen.
oh....so how can i flash it again during the usb is not working? thx.
DunyaX said:
oh....so how can i flash it again during the usb is not working? thx.
Click to expand...
Click to collapse
Sure. Just press and hold power, camera buttons and then soft reset. This will get you in to bootloader mode. Now flash away. Make sure you using the 2.40 unlocker for all of this to work.
That's kinda funny, the exact same thing happened to me, and I was getting pretty angry at it, then I just got into the boot loader, did it all over again and it worked, and now I'm pretty happy with a free GPS that Bell didn't tell us about.
http://forum.ppcgeeks.com/showthread.php?t=17667
The link above is a good step by step to follow. It's written for Sprint but it should get you going.
Thanks blazingwolf,and one more question. I flashed the Hard-SPL to 1.20-olipro instead of 2.40 by stupid. so, can i just reflash the Hard-SPL to 2.40-olipro and not do the whole flashing from the beginning? thx for help.
okay...finally i got it. it has to do every thing again. thanks blazingwolf, u r awesome. and TwistedWaffle, i had same feel at that time. almost killed myself. but i survived. haha.....

[Q] I need help my phone won't load up after HTC screen what to do?

I need help my phone won't load up after HTC screen!
what can i do ? : (
Did you flash anything prior to this problem or even install a program or tweak the registry?
i flashed a rom..
i tried hard rest.
nothing works.
but i think i did a mistake ,Full TMOUS Compatible with 576 RAM + 1 GB Storage and i have normal HD Leo..
can that be the reason?
The problem is if you have a TMOUS and flash a non TMOUS compatible ROM or even worse a .51 Radio. There is no problem the other way.
Did you HSLP flash your phone first?
The ROM you are flashing, unless it is a stock one (ie from HTC) does not include a Radio ROM. These custom ROMs will specify what Radio ROMs work with their ROMs. These Radio ROMs have to be flashed first, although if you go into bootloader mode (Hold Volume-down button and switch on), then connect and flash the correct Radio ROM.
yes i have HSLP 2.08 .
and i also installed radio rom 2.12.50 before flashing to the rom.
the rom is VBNROM▐ Aug 16 - RC5.5 Android Compat▐ BLACK/GTX▐ 21915/24623▐ Test 23129/23569▐
and i have a European leo version not the american.
so can that be a problem?
so u say i can do the hold down and power then i can install a new rom?
fred_up
thanks i did the Down Vol And power and flashed to a new rom.
and works ^^ thank u so much
From the VBNROM ROM Thread
v-b-n said:
....
Btw...I do not recommend 2.12.xx radio with my ROMs due to RIL compatibility...they may work fine but are not a perfect match
....
Click to expand...
Click to collapse
oh i see that's y it didn't work probably.
Please Can someone help me, I had a friend help me flash my HD2 because I had a dutch version ROM and I really didn't know how to do it myself and it seem working fine not until I got a call but couldn't answer it and the phone got stuck. Each time I reset it wouldn't help, it will gets stuck at htc and won't load up. I did a hard reset and it loaded up but when I tried calling it got stuck again. This morning I tried to flash a new ROM from CleanEX DsE Core ROM Series (6.5.X ManiMore) every thing seems going on well during synchronization from computer. it showed the last ROM being (Miri_HD2_WM65_21914_Sense25_V18.0). But now the phone wont get to a complete start up. I cant hard reset it any more since it keep continuing from the same htc screen spot before battery removal, not giving me the chance to hard reset from power down mode. when I soft reset it once, it got to the point when it ask for my pin code but it went back to the htc screen mode again before completion. now I cant do any thing just staring at the htc screen.
He first flashed the ROM with HSPL. I saw something like SPL 1.42 SPL 1.42.HSPL on the reset screen. Is this suppose to be the correct HSPL number? and how can I go about this, I need all the help please.

Please help

Hey, i tried to install android on my HD2 several times and failed, but then i noticed i had wrong version of hspl so i couldn't start MAGLRD (i had 3.03 i think i should've had 2.08 right?) Anyway i then tried to remove the HSPL by formatting my sd card and putting the file from original rom (i don't remember the name) and renaming it to LEOIMG, it started installing the rom i went to another room, when i came back it had finished and was on the red/blue/green screen and it said update failed and i had to retry, but now none of the exes work like rom updates or task29 nothing. when i turn on the phone it says "Not allow" and then goes to the red/blue/green screen. Please help me, I'm freaking out is there any way to fix it? Is there even a way to access SD card when the phone does this?
TomaToz, use the computer to flash via USB cable.
I can't, none of the rom updates or ANYTHING works since this, they all give errors
go to the magLDR page and look for how to remove it.
then start from scratch
There's no info how to remove it but even if there was how would i? None of the exes work and i can't turn the phone on, also i dont think MAGLRD got installed cause i had HSPL 3.03 instead of 2.08
Come on isn't htere anyone who ca help me? :|
are you sure you haven't bricked your phone?
because it just seems you did :/
I don't think you read the bold "You need HardSPL 2.08 before installation!" just above the history?
anyway, can you not flash a radio via USB as well?
also, if you post the error messages you get maybe we can help you more.
you can also check here:
http://forum.xda-developers.com/showthread.php?p=10275463
What does bricked mean? :9
and no i can not flash radio or anything else, i'll edit this message with a picture of what the error message looks like
EDIT: WOW, i tried to run the hspl installation and installed hspl 2.08 successfully, not i turned my phone on and its the screen where you choose to start the update for rom. This is the update after which my hd2 said "Update failed" so I'm scared to take any steps, please respond and tell me what to do
HOLY FREAKING CRAP! I installed android and everything seems to work fine, i can't tell you how relieved i am :]]]]
That's for your attention
Does anyone know where to get apps for Android 2.3.2?
What i installed is TyphooN_CM7_v3.5.9-MAGLDR
Help please!!! Hd2 stuck !
HI to all!my phone was working great until i decided to try a new rom so I installed task29 (i had elegancia rom but i wanted to try another rom)and now im stuck on the htc logo screen that says 'stick together' in a red square.....i tried vol down+power button to go into bootloader but nothing happens, then i tried to hard reset but still nothing happens...i pushed the reset button and i did it all over again at least 3 times but still nothing... is there anything else i can try? (even on the hardware?)
my HD2 is a T-MOBILE usa with :
radio 2.08.50.08_2
2.08.HSPL
3.14.531.1 elegancia rom(http://forum.xda-developers.com/showthread.php?t=651729)
i love my hd2 and i want it back...PLEASE HELP!!!!!!!
THANK YOU in advance!!!
sofialoca, task29 is not a thing to be "installed". It's a flash formatting. So you did everything correctly and deleted all from your phone except.. hmmm... stick together.
To flash other rom - just press Volume Down and push reset (under the battery cover) KEEPING VOLUME DOWN PRESSED. Keep it pressed until you are again in bootloader mode. Then connect USB and flash whatever you want.
thank you Andrew!I found the problem...
AndrewSh said:
sofialoca, task29 is not a thing to be "installed". It's a flash formatting. So you did everything correctly and deleted all from your phone except.. hmmm... stick together.
To flash other rom - just press Volume Down and push reset (under the battery cover) KEEPING VOLUME DOWN PRESSED. Keep it pressed until you are again in bootloader mode. Then connect USB and flash whatever you want.
Click to expand...
Click to collapse
thank you so much for the quick response! the problem was with my volume down button...i opened up the phone and moved the flex ribbon a bit to get it into place .after that it got in bootloader mode succesfully!im now back with elegancia and never gonna change it...i think i got a little greedy...afterall elegancia rom is great!thank you Miri and Steve0007 for this great rom and thank you again Andrew!
TomaToz said:
HOLY FREAKING CRAP! I installed android and everything seems to work fine, i can't tell you how relieved i am :]]]]
That's for your attention
Click to expand...
Click to collapse
glad it worked out in the end

Categories

Resources