Help Please!! Device freezes on HTC screen - Mogul, XV6800 ROM Development

I installed the hard=spl-mgf than i installed dcd 2.2, i read that I should install the radio afterwards. when the dcd2.2 rom finished installing the device when to the htc smart mobility screen and has been stuck there ever since. Dont know what to do! can anyone please help!!

Put your phone into bootloader mode (Hold Power Button + Camera Button + push in Reset hole with stylus) and try to flash new radio version. That should get you past the boot screen after the radio flash.

thanks! Now installing the new radio? You guys are awesome!

Glad I could help

so i tried this and the phone still sits at 0%. i dont know what to do
EDIT:i have been trying to find the original VZW ROM but i cant find it anywhere
EDIT 2:i found the vzw rom, and i am about to test it..

damnit to hell. no luck

The screen says
TITA100
SPL-1.06.0000
CPLD-9

it seems you did not unlock your phone, load the unlocker and then flash the rom

i tried Titan Unlocker and that sat at 0% too

have u guys made sure u have the 2.4 oli-pro bootloader???
if So...then flash the new rom...then put the phone in bootloader mode and flash the new radio...do a hard reset and it should work fine...thats exactly what i did. mine was stuck on htc screen as well...but now it works.
if that doesnt work, you might have to go to stock rom...download from htc website...then do the whole procedure again...Bootloader...Rom...Radio...Hard Reset

Related

Help Stuck on the splash Screen after attempt ROM Flash

I Attempted a rom flash to my wizard using the shell+bugfix thing w/ the official Tmobile Rom, but as it was Flashing the rom, it froze, and i comp reboot, and phone is now stuck at the loading screen, w/ the ILP & SPL & GSM & OS numbers.. HELP!? pls
EDIT:::OK: got it out of slashscreen mode (lol) now i cannot find a DL for the original cingular rom wm5
EDIT: Bah..i got it
Same PRoblem
Hey
im having the same problem on my MDA for T-mobile, Only mine wont even connect to activesync and is stuck on splashscreen, and hard reset wont change anything...Please someone help!!!!!
OK, how it go out of splashscreen?
IGNORE, I am getting there.
Same issue,
I can get the rainbow (Camera + Soft Reset) screen but can't connect to ActiveSync to flash my phone again with Wizard Love.
ActiveSync doesn't detect the phone on bootloader, but if you try to flash it, it will flash
myjess said:
OK, how it go out of splashscreen?
IGNORE, I am getting there.
Click to expand...
Click to collapse
Hi,
I'm stuck on the splash screen after trying to use the shelltool_bugfixed program. can you show me how to get out of it?
And also how do you do a hard reset on a a 8125?
Depending of your Wizard type, obtain the original vendor ROM and flash it.
To hard reset, press and bold both top buttons on both sides (Comm. Manager and Voice) and trigger the reset hole (under IR on right side)

possibly bricked my Verizon xv6800 =(

First off, I've been flashing my phone for almost a year now. So I don't consider myself too big of a noob. I loaded scrosler's round 4 rom. Worked great! Until I did a soft reset. It put the phone in bootloader mode and I can't boot up at all.
Here's what I have:
Olipro SPL 2.40
Radio 3.42.50
Here's what I've tried to get it out of bootloader:
mtty1.42.exe
titan_exitbl.exe
No success. I'm able to install a ROM, but as soon as it reboots after 100%, it goes right back into bootloader.
Someone please tell me it's not bricked
Try reflashing your radio.
BTC
kill the active sync processes via the task manager, then put the phone back into the usb cradle, run the titan exit bootloader and it should work.
josh77b said:
First off, I've been flashing my phone for almost a year now. So I don't consider myself too big of a noob. I loaded scrosler's round 4 rom. Worked great! Until I did a soft reset. It put the phone in bootloader mode and I can't boot up at all.
Here's what I have:
Olipro SPL 2.40
Radio 3.42.50
Here's what I've tried to get it out of bootloader:
mtty1.42.exe
titan_exitbl.exe
No success. I'm able to install a ROM, but as soon as it reboots after 100%, it goes right back into bootloader.
Someone please tell me it's not bricked
Click to expand...
Click to collapse
If no other suggestion works this will... But it sucks.... Flash a stock rom. I garuntee that will fix the problem. then just flash back. You don't have to flash a VZW ROM and I recommend against it. My new recommended ROM for unlocking and flashing is the Alltel ROM. Its got the latest radio in it (which you already have). Good luck and let us know how it turns out.
thanks for all the suggestions. i'm not sure what exactly went wrong, but i spent about a day and a half just to get it working again. it's somewhat stable now.
after flashing an older dcd rom, i was somehow able to get the OS to boot up, even after the auto soft reset. immediately i wanted to upgrade the bootloader to 2.47 since i've only found it in an exe(only can run from windows mobile) version. I then was able to flash the OEM MR1. Which automatically downgraded my radio. it was definitely the most stable thing i've flashed since the phone got all screwed up. i could soft reset as much as i wanted and didn't get the blue screen of death aka bootloader.
but of course, i couldn't be satisfied with no gps and no internet sharing. i use internet sharing more since i use it when i commute to work on BART (bay area's version of the subway) 50 min each way.
so now i'm on DCD's 3.2.6 ROM with 3.42.50 radio. so far it's somewhat stable. if i soft reset, i get the bootloader sometimes. but a couple solutions to the get the OS to boot back up is
1.) take the battery out for 20-30 seconds and power up
or
2.) take the battery out, plug in the computer usb or power usb with the battery still out. somehow resets the phone? i have no idea.
but i read somewhere that ROM's were causing people to have to take their battery out for 30 seconds to boot up. I doubt it was DCD's ROM's. But who knows, maybe i ran a bad radio file, ROM, or bootloader upgrade, that really caused the initial issues.
My only issue now other than getting the bootloader once in a while is that GPS isn't working. Not that big of a deal for now since I have the Pioneer AVIC F90BT in my car now. but would be nice to have it on my phone (tomtom & google maps) for that one time that might come up when i really need it and i'm not in my car.
again thanks for your help in trying to help a brotha out.
Verizon xv6800 bootloader and startup issues
My issues are, I cant get into the bootloader screen no matter what I try(power, camera and reset). Most times my phone will only go to the verizon screen and then just go white, other times, it may show the WM 6.5 startup screen and the freeze there. This all came from me trying to install WM 6,5 Beta 5 21159 rom from WM 6.1. On another not, my pc will not see my phone. So am I completely screwed? Is there any hope? Thanks in advance for any help.
So, overall, am I screwed?
Anybody have any suggestions?
Thanks
Can anyone help? my phone will not let me into bootloader mode or even startup past the verizon splash screen. I am desperately hoping that its not bricked. Also, the pc to phone usb connection will not see eachother.
My phone will charge via the usb cable to pc. When the wifi switch is turned on, the led on opposite side of the power led will do it green blinking.
Is there anyone that has time and is willing to work with me?
Thanks in advanced.
I have taken the phone apart so that I could push the internal buttons (power, camera and reset) to see if the outer shell buttons were the problem. They werent. I also still can't get past the verizon splash screen. Anyone have any ideas?
Thanks
I you cant get into bootloader you dont have any options.

[Q] Is my HD2 phone dead? (after flashing ROM)

Please Can someone help me, I had a friend help me flash my HD2 because I had a dutch version ROM and I really didn't know how to do it myself and it seem working fine not until I got a call but couldn't answer it and the phone got stuck. Each time I reset it wouldn't help, it will gets stuck at htc and won't load up. I did a hard reset and it loaded up but when I tried calling it got stuck again. This morning I tried to flash a new ROM from CleanEX DsE Core ROM Series (6.5.X ManiMore) every thing seems going on well during synchronization from computer. it showed the last ROM being (Miri_HD2_WM65_21914_Sense25_V18.0). But now the phone wont get to a complete start up. I cant hard reset it any more since it keep continuing from the same htc screen spot before battery removal, not giving me the chance to hard reset from power down mode. when I soft reset it once, it got to the point when it ask for my pin code but it went back to the htc screen mode again before completion. now I cant do any thing just staring at the htc screen.
He first flashed the ROM with HSPL. I saw something like SPL 1.42 SPL 1.42.HSPL on the reset screen. Is this suppose to be the correct HSPL number? and how can I go about this, I need all the help please.
Hold the Volume-Down button and switch on. This should get you to the Bootloader Mode.
Run Task29 to clear any latent info on your phone.
Flash the Radio ROM (the Custom ROM will specify which ones to select).
Flash the Custom ROM.
Please read the ROM's page to make sure that your phone will work with that ROM and Radio and all the instructions.

[Q] No bootloader after Task29

Hello!
It's insane, here is the description.
The android booted up just in safe mode.
The winmo had faults, so I've decided to change the whole system, with task 29.
At first I've changed my radio to the 2_12_50_02_2 version.
Than I've started the task29, the one what do not needs the radio.
Thats all I've done, and now I cannot reach the boot loader, or anything else.
The vol up and start trick is not working.
Please give me a solution, I need this phone working, I need a solution, and I appreciate every tip.
Thank You in advance!!!!
its volume down, not up.
same problem for me here
i did task29 and it was all fine, 100% reached and then the HD2 did a reboot, stopping at the black screen with the white HTC logo.
then as always i removed the battery and put it in again, holding vol down und clicking power-up once.
nothing happend... the phone vibrated once and got back to the HTC logo.
NO bootloader!
please do not tell me i'm too dumb to enter bootloader, i've been flashing custom roms for 6 months now!
my latest rom was Goatrip 6.0 and HSLP is 2.08
yesterday when goa6 was still "alive" the volume-down button worked fine, so the problem cant be some dust or dirt beneath the buttons.
edit: i've also tried flashing via SD card (clean FAT32 formatted 2gb card) the original stock rom 3.14 and a custom rom,
none of them is working either
every single hint of how i could solve this issue would be great!
hope to here from u guys
Remove the SD card and try again to go into BootLoader mode.
i have tried all methods and variations but i cant enter bootloader...
now i have found this thread:
--eeeeek cant post links --
its referring to the TP2 but i thought i would give it a try!
i've done this sketchy voldown+power+usbcable+batteryplugin thing but no result, even after 10 attempts :-(
Since you removed the battery, are all the pins straight?
those 5 (2 1 2) pins are in good shape
i cant post a link yet, ill send it to u via PM
posting links enabled:
http://forum.ppcgeeks.com/htc-touch-pro-2/122134-task29-didnt-complete-cant-enter-bootloader.html
i got it!
my stepfather owns a HD2, too.
i plug mine into his docking station while i was on the phone with htc support... just because i was bored waiting in the queue.
after the phone call i tried once again to enter bootloader e voila => boooom 3 colour screen!
i dont know whats the reason for, but i flashed my custom rom as fast as i could and it works fine.
but even now i cant enter bootloader properly...for 10 times trying 2 times actually work!
in the WM Os its no problem, Vol-Down functionality is 100%
cant explain that to me,
i think u need some luck to get this issue solved
___EDIT___
now with my customrom i could easily enter the bootloader via software command
and therefore i downgraded HSPL to stock spl1.42.000.
after this i flashed 2.08.hspl again and NOW my bootloader is working as intended!
u see, once u can get into bootloader again, all your problems can be fixed.
without him, you're f*cked
greetings

[Q] Is my phone bricked??

Hey all, I am having trouble booting anything onto my HD2 everytime i boot the phone i get stuck on the (tri colour screen) "Hardspl" i think..
I am able to install original HTC roms and custom roms via USB and Serial but after i install them and it says installation complete when the phone restarts it just gets stuck on the "Hardspl" screen again??
Any help is appreciated thanks
Here are some images to help
http://img29.imageshack.us/g/dsc0007riq.jpg/
(UPDATED)
How do i remove hspl ive tried installing an offical rom from the SD card but i still boot into this screen ????
Try this........
Power off the phone (make sure your battery is over 50%)
Turn on while holding the vol. down button.
You should be at bootloader (three colour screen)
If you have HSPL installed you should see "cotulla" and "HSPL" on the bootloader somewhere.
If youve been flashing official roms though this may have uninstalled HSPL.
I couldnt get the screenshots you linked to...
You can attach image files using the "manage attachments" button down under the text entry area.. (i think)
Id suggest trying to flash a stock/official rom just now until you get up and running.
With the phone at bootloader you should see the word "serial" at the bottom of the screen....
Connect via USB and wait for "serial" to change to "USB", this could take a few minutes.......
When you see "usb" flash the ROM from your pc......
You should make sure that you have the correct ROM for your phone, go to the HTC site and pump in your serial number.
If you still have problems after this then post back here with any error messages you might get...
Hope that helps.....
Thanks for the reply, for the link you need to add (http ://) sorry i should have mentioned that
but i just finished doing what you told be and it finished installing. it had the HTC logo on phone with loading bar as on PC screen no errors :S but im still stuck on the tri colour screen
I originally had android booted onto this mobile but the 3G was not working so i tried installing the HTC wm 6.5 rom that I downloaded from the HTC website but it would not get out of the tri colour screen after i installed it.
So i though it may have been the hardspl its self so i updated the SLP from 2.05 to the 3.03 one im currently on but it does the same thing
Hmm ok...
So the flash finished all the wasy to 100% and there were no error messages..
then the phone rebooted and went to bootloader (3 colours)...??
Restarting the phone just keeps returning you to bootloader??
Try turning off then back on while holding down both volume buttons and see what happens.
Which model of HD2 do you have and which ROM did you flash??
Yes thats correct.
When i turn the device on wile holding vol up-down i get a grey screen to
"This operation will delete all your personal data, and reset all settings to manufacturer default. press vol up to restore or press any other keys to cancel"
and im not sure what HTC HD2 i have..
Model: T8585 ?
I flashed the latest rom from the HTC website using the S/N
"RUU_Leo_S_HKCSL_WWE_3.14.831.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
Okay, get to that screen and press volume up to continue, this will perform a hard reset which is recommended after a flash, your device should then boot up, may take a few minutes as its the first time..........
ok, It finished in like less then 10sec but there was not skips did from 1% - 100% smoothly and says "Restore....Completed Press VolUp to boot"
So i pressed volume up and once again stuck on the tri colour screen
any more suggestions or is my phone dead?
Hmmm
Phones not bricked because 95% of the time if you can get to bootloader the problem can be fixed........
I have the feeling this is something obvious that Im not picking up on.
Chances are someone else will see this and point out the obvious but at the minute I cant think why it might be doing that......
You could try flashing the ROM from SD card.
Rename the file on your PC to "leoimg.nbh" and put it on a 2gb/4gb sd card, turn the phone off, put the card in, turn on and it should flash........
Like I said, i dont think your phone is dead, I think Im missing something obvious....
its weird because i can install roms, hardspl's and all that stuff it knows the phone is there and installs them but for some reason it never gets passes the hardspl stage.. on each boot.
it accually boots into the tri colour screen in a split second of turning the phone on
Its a longshot but is there any possibility that your volume down button is stuck in the pressed position.........
yeah i have installed off the SD card already. that took awhile but it says everything is ok and installsion has completed.
same problem though once i restart tri-coloured screen pops up.
Im afraid Im not sure about this one...........
I'll keep thinking and let you know if anything occurs to me.....
Im sure someone else will chip in at some point and point out the issue though.
alright no worries thanks for the help and time hopefully someone knows what the problem is.
Maybe if i uninstall the Hardspl? might totally wreck it and 100% brick my phone if it fails but I think its the only option ill have left soon
uninstalling hspl shouldnt cause any harm........
I didnt realise you had HSPL installed, I take it you instaled that after flashing the stock rom??
If you have HSPL installed......
Try to install a custom rom, ie an energy rom, just as an experiment........
dunno if youve seen the images yet conan, but unless its changed since, the OP has 3.03.0000
also, if he has magldr installed ( i didnt see it mentioned, but..) when you hard reset it takes just a few seconds, because it is only hard resetting magldr (at least thats my understanding, and would offer a reason why hard reset is so quick)
I suspect incorrect 3,14 flash, which didnt complete so its returning to bootloader,
so, OP, bootloader - hspl4 - 3.03.hspl - flash your 3.13 rom again, over usb.
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
If this works im donating $20 to you right away no joke .. ive been trying to fix for 13hours straight
Australian icon said:
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
Click to expand...
Click to collapse
sd card flash, right?
Step 1 of the flash is the spl gets overwritten by the one in the leoing.nbh rom (3.03.0000 in this case) and then the phone reboots, and starts to flash , , splashscreen (where magldr is), radio, rom.
BUT, the phone wont allow the flash to start because hspl is now gone, so it fails CID checks and stops, so doesn't remove magldr, radio, rom, nothing, it just stops. Further attempts at flashing fail because you teh user haven't notived the spl change, you assume the whole flash failed, and that hspl is still there.
You shouldnt be able to get that far normaly, it would fail before it even starts, on a stock spl, except that hspl was there, so the flash was allowed to begin.
Ok, so its on SPL-3.03.HSPL now then I installed the latest HTC offical rom with USB but still no go
also if it is resetting magldr how come it doesent load up like it used to after a reset

Categories

Resources