I installed the hard=spl-mgf than i installed dcd 2.2, i read that I should install the radio afterwards. when the dcd2.2 rom finished installing the device when to the htc smart mobility screen and has been stuck there ever since. Dont know what to do! can anyone please help!!
Put your phone into bootloader mode (Hold Power Button + Camera Button + push in Reset hole with stylus) and try to flash new radio version. That should get you past the boot screen after the radio flash.
thanks! Now installing the new radio? You guys are awesome!
Glad I could help
so i tried this and the phone still sits at 0%. i dont know what to do
EDIT:i have been trying to find the original VZW ROM but i cant find it anywhere
EDIT 2:i found the vzw rom, and i am about to test it..
damnit to hell. no luck
The screen says
TITA100
SPL-1.06.0000
CPLD-9
it seems you did not unlock your phone, load the unlocker and then flash the rom
i tried Titan Unlocker and that sat at 0% too
have u guys made sure u have the 2.4 oli-pro bootloader???
if So...then flash the new rom...then put the phone in bootloader mode and flash the new radio...do a hard reset and it should work fine...thats exactly what i did. mine was stuck on htc screen as well...but now it works.
if that doesnt work, you might have to go to stock rom...download from htc website...then do the whole procedure again...Bootloader...Rom...Radio...Hard Reset
I have a type 2a brick where it hangs on the the carrier boot screen. I followed the directions and installed windows 5.0 ce and using platform builder I sync my device and the screen stays white I left it run its full processes till it stopped. Yet my screen still hangs white. I soft reset the device and now it hangs on the Windows Mobile boot screen. So it did progress from its original problem. I havent had time to troubleshoot further. Just curious on what I can do. If anyone has any suggestions please share.
IPL???
SPL???
NO GSM???
KITL enabled or not????
IPL
SPL 1.04
NoGSM
Kitl is enabled
Im sorry im at work. I cant remember the IPL. I will edit when I get home
Hermes unbrick
C Brown said:
I have a type 2a brick where it hangs on the the carrier boot screen. I followed the directions and installed windows 5.0 ce and using platform builder I sync my device and the screen stays white I left it run its full processes till it stopped. Yet my screen still hangs white. I soft reset the device and now it hangs on the Windows Mobile boot screen. So it did progress from its original problem. I havent had time to troubleshoot further. Just curious on what I can do. If anyone has any suggestions please share.
Click to expand...
Click to collapse
If your screen hangs in white screen - delete ril.dll . Must be work. After complete boot don't forget to run sspl-hermes.exe from card . Next step flash a complete original carrier rom (os +radio) , after this - hardspl7 and after flash what you want. Good Luck!
edrin said:
If your screen hangs in white screen - delete ril.dll . Must be work. After complete boot don't forget to run sspl-hermes.exe from card . Next step flash a complete original carrier rom (os +radio) , after this - hardspl7 and after flash what you want. Good Luck!
Click to expand...
Click to collapse
Thank you sooo much. I have the phone booting up I just need the right rom to flash it. I keep getting a invalid vendor ID
Okay. So I managed to make it through the original HTC Q-tek 1.18 rom. It still freezes at the windows mobile boot. Any ideas!?!?!?!? I reconnected it to PB and it booted fine. Once it was fully booted I disconnected it and it was working fine. Flashed hardsplv7 and managed to get shamanix 2.1 and now its froze on the windows mobile boot screen again. Im going to run through the process again to see if I can fix it.
I dont know how this happened but my Kitl was disabled. it there anyway I can get it back its the only was I can get my phone to boot.
ok I did the soft spl method and flashed the WizFlo Latest went to 100% and soft reseted then went to the Windows Mobile Wiz Flo Screen and said tap here to setup your device i tapped it went to the align screen page and then locked up. I took out the battery and turned it back on this time it locked up on the tap here to setup your device screen. I did a hard reset and it locked again at the align screen. Now it locks on the tap here to setup your device screen and even hard reset wont work. I also have tried holding down the camera button to get into the boot loader but it does nothing? any ideas?
Update:
ok i finally got it to hard reset again but it still doesnt help anything. also the camera button being held down does nothing for me?
Update 2:
Ok I finally got into the bootloader screen and it shows USB in the bottom left but the RUU is unable to make a connection?
Update 3:
Ok I got it working. Not sure how but I just rebooted the XP machine and disabled the USB in activesynce (Also used a different battery) and Viola it loaded the original Tmobile Rom. Now Im just afraid if i try to do the Wiz Flo again it will do the same thing any thoughts should i install the Wizard Love rom first?
Thanks peeps.
adambennett said:
ok I did the soft spl method and flashed the WizFlo Latest went to 100% and soft reseted then went to the Windows Mobile Wiz Flo Screen and said tap here to setup your device i tapped it went to the align screen page and then locked up. I took out the battery and turned it back on this time it locked up on the tap here to setup your device screen. I did a hard reset and it locked again at the align screen. Now it locks on the tap here to setup your device screen and even hard reset wont work. I also have tried holding down the camera button to get into the boot loader but it does nothing? any ideas?
Update:
ok i finally got it to hard reset again but it still doesnt help anything. also the camera button being held down does nothing for me?
Update 2:
Ok I finally got into the bootloader screen and it shows USB in the bottom left but the RUU is unable to make a connection?
Update 3:
Ok I got it working. Not sure how but I just rebooted the XP machine and disabled the USB in activesynce (Also used a different battery) and Viola it loaded the original Tmobile Rom. Now Im just afraid if i try to do the Wiz Flo again it will do the same thing any thoughts should i install the Wizard Love rom first?
Thanks peeps.
Click to expand...
Click to collapse
It must have been a bad flash,nothing to get worried,sometimes,even SoftSPL doesn't load properely,it'll only work when the screen has gotten completely white and displays patched IPL/SPL.
Well,try to flash again,but if it still fails,you shud get the phone HardSPL instead of SoftSPL and upgrade to any wm6.1 rom.
Yea i tried it a second time and same thing. So i should do a hard spl then?
oh btw: it didnt show me a ipl/spl after loading softspl it simply wetn to a blank white screen and when it was updating the rom there was a progress bar on the computer but not on the phone still just a blank white screen.
adambennett said:
Yea i tried it a second time and same thing. So i should do a hard spl then?
oh btw: it didnt show me a ipl/spl after loading softspl it simply wetn to a blank white screen and when it was updating the rom there was a progress bar on the computer but not on the phone still just a blank white screen.
Click to expand...
Click to collapse
Then, as Zabardast said, you should try HardSPL. It can be reversed, so if you need to flash back, you still can, so don't worry.
WizFlo is very nice. Using it right now...
ok ill give it a try thanks
Please Can someone help me, I had a friend help me flash my HD2 because I had a dutch version ROM and I really didn't know how to do it myself and it seem working fine not until I got a call but couldn't answer it and the phone got stuck. Each time I reset it wouldn't help, it will gets stuck at htc and won't load up. I did a hard reset and it loaded up but when I tried calling it got stuck again. This morning I tried to flash a new ROM from CleanEX DsE Core ROM Series (6.5.X ManiMore) every thing seems going on well during synchronization from computer. it showed the last ROM being (Miri_HD2_WM65_21914_Sense25_V18.0). But now the phone wont get to a complete start up. I cant hard reset it any more since it keep continuing from the same htc screen spot before battery removal, not giving me the chance to hard reset from power down mode. when I soft reset it once, it got to the point when it ask for my pin code but it went back to the htc screen mode again before completion. now I cant do any thing just staring at the htc screen.
He first flashed the ROM with HSPL. I saw something like SPL 1.42 SPL 1.42.HSPL on the reset screen. Is this suppose to be the correct HSPL number? and how can I go about this, I need all the help please.
Hold the Volume-Down button and switch on. This should get you to the Bootloader Mode.
Run Task29 to clear any latent info on your phone.
Flash the Radio ROM (the Custom ROM will specify which ones to select).
Flash the Custom ROM.
Please read the ROM's page to make sure that your phone will work with that ROM and Radio and all the instructions.
Hey all, I am having trouble booting anything onto my HD2 everytime i boot the phone i get stuck on the (tri colour screen) "Hardspl" i think..
I am able to install original HTC roms and custom roms via USB and Serial but after i install them and it says installation complete when the phone restarts it just gets stuck on the "Hardspl" screen again??
Any help is appreciated thanks
Here are some images to help
http://img29.imageshack.us/g/dsc0007riq.jpg/
(UPDATED)
How do i remove hspl ive tried installing an offical rom from the SD card but i still boot into this screen ????
Try this........
Power off the phone (make sure your battery is over 50%)
Turn on while holding the vol. down button.
You should be at bootloader (three colour screen)
If you have HSPL installed you should see "cotulla" and "HSPL" on the bootloader somewhere.
If youve been flashing official roms though this may have uninstalled HSPL.
I couldnt get the screenshots you linked to...
You can attach image files using the "manage attachments" button down under the text entry area.. (i think)
Id suggest trying to flash a stock/official rom just now until you get up and running.
With the phone at bootloader you should see the word "serial" at the bottom of the screen....
Connect via USB and wait for "serial" to change to "USB", this could take a few minutes.......
When you see "usb" flash the ROM from your pc......
You should make sure that you have the correct ROM for your phone, go to the HTC site and pump in your serial number.
If you still have problems after this then post back here with any error messages you might get...
Hope that helps.....
Thanks for the reply, for the link you need to add (http ://) sorry i should have mentioned that
but i just finished doing what you told be and it finished installing. it had the HTC logo on phone with loading bar as on PC screen no errors :S but im still stuck on the tri colour screen
I originally had android booted onto this mobile but the 3G was not working so i tried installing the HTC wm 6.5 rom that I downloaded from the HTC website but it would not get out of the tri colour screen after i installed it.
So i though it may have been the hardspl its self so i updated the SLP from 2.05 to the 3.03 one im currently on but it does the same thing
Hmm ok...
So the flash finished all the wasy to 100% and there were no error messages..
then the phone rebooted and went to bootloader (3 colours)...??
Restarting the phone just keeps returning you to bootloader??
Try turning off then back on while holding down both volume buttons and see what happens.
Which model of HD2 do you have and which ROM did you flash??
Yes thats correct.
When i turn the device on wile holding vol up-down i get a grey screen to
"This operation will delete all your personal data, and reset all settings to manufacturer default. press vol up to restore or press any other keys to cancel"
and im not sure what HTC HD2 i have..
Model: T8585 ?
I flashed the latest rom from the HTC website using the S/N
"RUU_Leo_S_HKCSL_WWE_3.14.831.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
Okay, get to that screen and press volume up to continue, this will perform a hard reset which is recommended after a flash, your device should then boot up, may take a few minutes as its the first time..........
ok, It finished in like less then 10sec but there was not skips did from 1% - 100% smoothly and says "Restore....Completed Press VolUp to boot"
So i pressed volume up and once again stuck on the tri colour screen
any more suggestions or is my phone dead?
Hmmm
Phones not bricked because 95% of the time if you can get to bootloader the problem can be fixed........
I have the feeling this is something obvious that Im not picking up on.
Chances are someone else will see this and point out the obvious but at the minute I cant think why it might be doing that......
You could try flashing the ROM from SD card.
Rename the file on your PC to "leoimg.nbh" and put it on a 2gb/4gb sd card, turn the phone off, put the card in, turn on and it should flash........
Like I said, i dont think your phone is dead, I think Im missing something obvious....
its weird because i can install roms, hardspl's and all that stuff it knows the phone is there and installs them but for some reason it never gets passes the hardspl stage.. on each boot.
it accually boots into the tri colour screen in a split second of turning the phone on
Its a longshot but is there any possibility that your volume down button is stuck in the pressed position.........
yeah i have installed off the SD card already. that took awhile but it says everything is ok and installsion has completed.
same problem though once i restart tri-coloured screen pops up.
Im afraid Im not sure about this one...........
I'll keep thinking and let you know if anything occurs to me.....
Im sure someone else will chip in at some point and point out the issue though.
alright no worries thanks for the help and time hopefully someone knows what the problem is.
Maybe if i uninstall the Hardspl? might totally wreck it and 100% brick my phone if it fails but I think its the only option ill have left soon
uninstalling hspl shouldnt cause any harm........
I didnt realise you had HSPL installed, I take it you instaled that after flashing the stock rom??
If you have HSPL installed......
Try to install a custom rom, ie an energy rom, just as an experiment........
dunno if youve seen the images yet conan, but unless its changed since, the OP has 3.03.0000
also, if he has magldr installed ( i didnt see it mentioned, but..) when you hard reset it takes just a few seconds, because it is only hard resetting magldr (at least thats my understanding, and would offer a reason why hard reset is so quick)
I suspect incorrect 3,14 flash, which didnt complete so its returning to bootloader,
so, OP, bootloader - hspl4 - 3.03.hspl - flash your 3.13 rom again, over usb.
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
If this works im donating $20 to you right away no joke .. ive been trying to fix for 13hours straight
Australian icon said:
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
Click to expand...
Click to collapse
sd card flash, right?
Step 1 of the flash is the spl gets overwritten by the one in the leoing.nbh rom (3.03.0000 in this case) and then the phone reboots, and starts to flash , , splashscreen (where magldr is), radio, rom.
BUT, the phone wont allow the flash to start because hspl is now gone, so it fails CID checks and stops, so doesn't remove magldr, radio, rom, nothing, it just stops. Further attempts at flashing fail because you teh user haven't notived the spl change, you assume the whole flash failed, and that hspl is still there.
You shouldnt be able to get that far normaly, it would fail before it even starts, on a stock spl, except that hspl was there, so the flash was allowed to begin.
Ok, so its on SPL-3.03.HSPL now then I installed the latest HTC offical rom with USB but still no go
also if it is resetting magldr how come it doesent load up like it used to after a reset