I Attempted a rom flash to my wizard using the shell+bugfix thing w/ the official Tmobile Rom, but as it was Flashing the rom, it froze, and i comp reboot, and phone is now stuck at the loading screen, w/ the ILP & SPL & GSM & OS numbers.. HELP!? pls
EDIT:::OK: got it out of slashscreen mode (lol) now i cannot find a DL for the original cingular rom wm5
EDIT: Bah..i got it
Same PRoblem
Hey
im having the same problem on my MDA for T-mobile, Only mine wont even connect to activesync and is stuck on splashscreen, and hard reset wont change anything...Please someone help!!!!!
OK, how it go out of splashscreen?
IGNORE, I am getting there.
Same issue,
I can get the rainbow (Camera + Soft Reset) screen but can't connect to ActiveSync to flash my phone again with Wizard Love.
ActiveSync doesn't detect the phone on bootloader, but if you try to flash it, it will flash
myjess said:
OK, how it go out of splashscreen?
IGNORE, I am getting there.
Click to expand...
Click to collapse
Hi,
I'm stuck on the splash screen after trying to use the shelltool_bugfixed program. can you show me how to get out of it?
And also how do you do a hard reset on a a 8125?
Depending of your Wizard type, obtain the original vendor ROM and flash it.
To hard reset, press and bold both top buttons on both sides (Comm. Manager and Voice) and trigger the reset hole (under IR on right side)
Hi
I was using the "ROM for Prophet ShadoW 1.0 (Vista Edition)( Clean Edition )" and encountered numerous problems with this rom so decided to revert back to my previous rom "PDAVIET". I plugged my deviced in and attempted to run the "batch file" followed the dos cmd prompts and ended up with the frozen screen.
1. Hard reset does nothing it just shows the boot screen and freezes
2. Whenever i try to install a rom it says device is not detected
Here are some details
I was using the Prophet Shadow 1.0 VU
Trying to run upgrade_rom.bat from PV_4.0.0.0.6_Touch when it happened
HT PRophet
G3 Version
last hard reset was now (just after it happened) whenever i format it it just does it really quickly like its not really doing anything
Cant soft reset the device
Cant shutdown
Device can no longer be detected
IPL 1.00
SPL 2.G£.4PDA
GSM 02.47.21
OS 4.0.0.0
Basically the os cannot boot properly therefore it cant be detected i need some sort of auto boot program
Can anyone help
try this..
http://forum.xda-developers.com/showthread.php?t=361335
Rivadex said:
Hi
I was using the "ROM for Prophet ShadoW 1.0 (Vista Edition)( Clean Edition )" and encountered numerous problems with this rom so decided to revert back to my previous rom "PDAVIET". I plugged my deviced in and attempted to run the "batch file" followed the dos cmd prompts and ended up with the frozen screen.
1. Hard reset does nothing it just shows the boot screen and freezes
2. Whenever i try to install a rom it says device is not detected
Here are some details
I was using the Prophet Shadow 1.0 VU
Trying to run upgrade_rom.bat from PV_4.0.0.0.6_Touch when it happened
HT PRophet
G3 Version
last hard reset was now (just after it happened) whenever i format it it just does it really quickly like its not really doing anything
Cant soft reset the device
Cant shutdown
Device can no longer be detected
IPL 1.00
SPL 2.G£.4PDA
GSM 02.47.21
OS 4.0.0.0
Basically the os cannot boot properly therefore it cant be detected i need some sort of auto boot program
Can anyone help
Click to expand...
Click to collapse
Hey hey~~~
GO HERE, have a look
http://forum.xda-developers.com/showthread.php?t=353547
hi
Thanks guys, i am unable to move any files on my device because i can now only get the rainbow screen. My phone cannot be detected by active sync.
When i try to run an RUU it does a little more then it previously did in terms of shpwing me the percentage bar (installation process) but my rainbow screen turns off and then i get an error message.
Now the rainbow screen appears every few minutes on its own and goes off again.
Am i misunderstanding what your saying?
Rivadex said:
hi
Thanks guys, i am unable to move any files on my device because i can now only get the rainbow screen. My phone cannot be detected by active sync.
When i try to run an RUU it does a little more then it previously did in terms of shpwing me the percentage bar (installation process) but my rainbow screen turns off and then i get an error message.
Now the rainbow screen appears every few minutes on its own and goes off again.
Am i misunderstanding what your saying?
Click to expand...
Click to collapse
GO HERE, have a look
http://forum.xda-developers.com/showthread.php?t=353547
read all !!!!
Run PVtemp to recover...................................
Thanks for your help. I will have a look tomorrow because even though i am reading your instructions i am still not understandingh it.
1. The first method isnt possible because i cannot see the device to move files into it
2. With the second method i cannot find the PVTemp you mention
I am not too good with this so it will take time for me to get what your saying.
Thanks again - i will charge my phone overnight to make sure my battery is ok
Update: Phones now working fine, it was my battery that needed charging
Thank you dioxda2 and duato for your help
ok I did the soft spl method and flashed the WizFlo Latest went to 100% and soft reseted then went to the Windows Mobile Wiz Flo Screen and said tap here to setup your device i tapped it went to the align screen page and then locked up. I took out the battery and turned it back on this time it locked up on the tap here to setup your device screen. I did a hard reset and it locked again at the align screen. Now it locks on the tap here to setup your device screen and even hard reset wont work. I also have tried holding down the camera button to get into the boot loader but it does nothing? any ideas?
Update:
ok i finally got it to hard reset again but it still doesnt help anything. also the camera button being held down does nothing for me?
Update 2:
Ok I finally got into the bootloader screen and it shows USB in the bottom left but the RUU is unable to make a connection?
Update 3:
Ok I got it working. Not sure how but I just rebooted the XP machine and disabled the USB in activesynce (Also used a different battery) and Viola it loaded the original Tmobile Rom. Now Im just afraid if i try to do the Wiz Flo again it will do the same thing any thoughts should i install the Wizard Love rom first?
Thanks peeps.
adambennett said:
ok I did the soft spl method and flashed the WizFlo Latest went to 100% and soft reseted then went to the Windows Mobile Wiz Flo Screen and said tap here to setup your device i tapped it went to the align screen page and then locked up. I took out the battery and turned it back on this time it locked up on the tap here to setup your device screen. I did a hard reset and it locked again at the align screen. Now it locks on the tap here to setup your device screen and even hard reset wont work. I also have tried holding down the camera button to get into the boot loader but it does nothing? any ideas?
Update:
ok i finally got it to hard reset again but it still doesnt help anything. also the camera button being held down does nothing for me?
Update 2:
Ok I finally got into the bootloader screen and it shows USB in the bottom left but the RUU is unable to make a connection?
Update 3:
Ok I got it working. Not sure how but I just rebooted the XP machine and disabled the USB in activesynce (Also used a different battery) and Viola it loaded the original Tmobile Rom. Now Im just afraid if i try to do the Wiz Flo again it will do the same thing any thoughts should i install the Wizard Love rom first?
Thanks peeps.
Click to expand...
Click to collapse
It must have been a bad flash,nothing to get worried,sometimes,even SoftSPL doesn't load properely,it'll only work when the screen has gotten completely white and displays patched IPL/SPL.
Well,try to flash again,but if it still fails,you shud get the phone HardSPL instead of SoftSPL and upgrade to any wm6.1 rom.
Yea i tried it a second time and same thing. So i should do a hard spl then?
oh btw: it didnt show me a ipl/spl after loading softspl it simply wetn to a blank white screen and when it was updating the rom there was a progress bar on the computer but not on the phone still just a blank white screen.
adambennett said:
Yea i tried it a second time and same thing. So i should do a hard spl then?
oh btw: it didnt show me a ipl/spl after loading softspl it simply wetn to a blank white screen and when it was updating the rom there was a progress bar on the computer but not on the phone still just a blank white screen.
Click to expand...
Click to collapse
Then, as Zabardast said, you should try HardSPL. It can be reversed, so if you need to flash back, you still can, so don't worry.
WizFlo is very nice. Using it right now...
ok ill give it a try thanks
Hi all,
I've got a problem with my hermes phone which I can't solve by my own I think :
My device gets stucked while booting. It just shows a "htc smart mobility" screen and displays the various red numbers on the bottom for some seconds (as usual I think). But it's not going any further (waited for about 20 minutes).
I flashed the "Hermes.DarkVisions.v5.17.23017.Manila" rom over my exisisting "Schap's 4.22" rom a few hours before. The rom was running good. Then I executed the "kill em all" app by mistake, which can be found in the accessory folder as far as I can remember. Then the phone began to work very slowly so I decided to restart it. And now its not really working any more.
By connecting the phone with my pc and trying to flash a new rom, I get the RUU Error "200 INVALID UPDATE TOOL" - what does this mean? The auto detection of the current bootloader obviously doesn't work due to no running windows mobile.
Is there any chance to flash the phone without a running windows mobile? Or what else can I do to get the current rom "Dark Visions" running again?
Thanks a lot for your help,
Michael
Press The Power, The ok button (usually found on the left side) and The reset button using your pen until this rainbow coloured thing comes up.
Plug it into your USB and then reflash your ROM, also don't forget to upgrade your radio as you will need it to stabilize your custom ROM which you will find under wiki part of this forum. Just search "Hermes Radio" and click the first thing you see.
Now your device should be back to life again.
OK, so I've been reading the Common Upgrade Problems on the wiki, and I saw this:
Important : Windows VISTA users need to make a change to their system to successfully use many ROM packages. See Mr. Vanx's guide here.
Click to expand...
Click to collapse
Since Mr.Vanx's website was taken down, I ask you what are the changes i need to perform and if I need to apply them to Windows 7.
Best wishes!
Any help in here?
Please, i have the same trouble. I didn't work with Windows 7. Does Anyone know a solution?
Hey all, I am having trouble booting anything onto my HD2 everytime i boot the phone i get stuck on the (tri colour screen) "Hardspl" i think..
I am able to install original HTC roms and custom roms via USB and Serial but after i install them and it says installation complete when the phone restarts it just gets stuck on the "Hardspl" screen again??
Any help is appreciated thanks
Here are some images to help
http://img29.imageshack.us/g/dsc0007riq.jpg/
(UPDATED)
How do i remove hspl ive tried installing an offical rom from the SD card but i still boot into this screen ????
Try this........
Power off the phone (make sure your battery is over 50%)
Turn on while holding the vol. down button.
You should be at bootloader (three colour screen)
If you have HSPL installed you should see "cotulla" and "HSPL" on the bootloader somewhere.
If youve been flashing official roms though this may have uninstalled HSPL.
I couldnt get the screenshots you linked to...
You can attach image files using the "manage attachments" button down under the text entry area.. (i think)
Id suggest trying to flash a stock/official rom just now until you get up and running.
With the phone at bootloader you should see the word "serial" at the bottom of the screen....
Connect via USB and wait for "serial" to change to "USB", this could take a few minutes.......
When you see "usb" flash the ROM from your pc......
You should make sure that you have the correct ROM for your phone, go to the HTC site and pump in your serial number.
If you still have problems after this then post back here with any error messages you might get...
Hope that helps.....
Thanks for the reply, for the link you need to add (http ://) sorry i should have mentioned that
but i just finished doing what you told be and it finished installing. it had the HTC logo on phone with loading bar as on PC screen no errors :S but im still stuck on the tri colour screen
I originally had android booted onto this mobile but the 3G was not working so i tried installing the HTC wm 6.5 rom that I downloaded from the HTC website but it would not get out of the tri colour screen after i installed it.
So i though it may have been the hardspl its self so i updated the SLP from 2.05 to the 3.03 one im currently on but it does the same thing
Hmm ok...
So the flash finished all the wasy to 100% and there were no error messages..
then the phone rebooted and went to bootloader (3 colours)...??
Restarting the phone just keeps returning you to bootloader??
Try turning off then back on while holding down both volume buttons and see what happens.
Which model of HD2 do you have and which ROM did you flash??
Yes thats correct.
When i turn the device on wile holding vol up-down i get a grey screen to
"This operation will delete all your personal data, and reset all settings to manufacturer default. press vol up to restore or press any other keys to cancel"
and im not sure what HTC HD2 i have..
Model: T8585 ?
I flashed the latest rom from the HTC website using the S/N
"RUU_Leo_S_HKCSL_WWE_3.14.831.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
Okay, get to that screen and press volume up to continue, this will perform a hard reset which is recommended after a flash, your device should then boot up, may take a few minutes as its the first time..........
ok, It finished in like less then 10sec but there was not skips did from 1% - 100% smoothly and says "Restore....Completed Press VolUp to boot"
So i pressed volume up and once again stuck on the tri colour screen
any more suggestions or is my phone dead?
Hmmm
Phones not bricked because 95% of the time if you can get to bootloader the problem can be fixed........
I have the feeling this is something obvious that Im not picking up on.
Chances are someone else will see this and point out the obvious but at the minute I cant think why it might be doing that......
You could try flashing the ROM from SD card.
Rename the file on your PC to "leoimg.nbh" and put it on a 2gb/4gb sd card, turn the phone off, put the card in, turn on and it should flash........
Like I said, i dont think your phone is dead, I think Im missing something obvious....
its weird because i can install roms, hardspl's and all that stuff it knows the phone is there and installs them but for some reason it never gets passes the hardspl stage.. on each boot.
it accually boots into the tri colour screen in a split second of turning the phone on
Its a longshot but is there any possibility that your volume down button is stuck in the pressed position.........
yeah i have installed off the SD card already. that took awhile but it says everything is ok and installsion has completed.
same problem though once i restart tri-coloured screen pops up.
Im afraid Im not sure about this one...........
I'll keep thinking and let you know if anything occurs to me.....
Im sure someone else will chip in at some point and point out the issue though.
alright no worries thanks for the help and time hopefully someone knows what the problem is.
Maybe if i uninstall the Hardspl? might totally wreck it and 100% brick my phone if it fails but I think its the only option ill have left soon
uninstalling hspl shouldnt cause any harm........
I didnt realise you had HSPL installed, I take it you instaled that after flashing the stock rom??
If you have HSPL installed......
Try to install a custom rom, ie an energy rom, just as an experiment........
dunno if youve seen the images yet conan, but unless its changed since, the OP has 3.03.0000
also, if he has magldr installed ( i didnt see it mentioned, but..) when you hard reset it takes just a few seconds, because it is only hard resetting magldr (at least thats my understanding, and would offer a reason why hard reset is so quick)
I suspect incorrect 3,14 flash, which didnt complete so its returning to bootloader,
so, OP, bootloader - hspl4 - 3.03.hspl - flash your 3.13 rom again, over usb.
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
If this works im donating $20 to you right away no joke .. ive been trying to fix for 13hours straight
Australian icon said:
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
Click to expand...
Click to collapse
sd card flash, right?
Step 1 of the flash is the spl gets overwritten by the one in the leoing.nbh rom (3.03.0000 in this case) and then the phone reboots, and starts to flash , , splashscreen (where magldr is), radio, rom.
BUT, the phone wont allow the flash to start because hspl is now gone, so it fails CID checks and stops, so doesn't remove magldr, radio, rom, nothing, it just stops. Further attempts at flashing fail because you teh user haven't notived the spl change, you assume the whole flash failed, and that hspl is still there.
You shouldnt be able to get that far normaly, it would fail before it even starts, on a stock spl, except that hspl was there, so the flash was allowed to begin.
Ok, so its on SPL-3.03.HSPL now then I installed the latest HTC offical rom with USB but still no go
also if it is resetting magldr how come it doesent load up like it used to after a reset