Hi
I was using the "ROM for Prophet ShadoW 1.0 (Vista Edition)( Clean Edition )" and encountered numerous problems with this rom so decided to revert back to my previous rom "PDAVIET". I plugged my deviced in and attempted to run the "batch file" followed the dos cmd prompts and ended up with the frozen screen.
1. Hard reset does nothing it just shows the boot screen and freezes
2. Whenever i try to install a rom it says device is not detected
Here are some details
I was using the Prophet Shadow 1.0 VU
Trying to run upgrade_rom.bat from PV_4.0.0.0.6_Touch when it happened
HT PRophet
G3 Version
last hard reset was now (just after it happened) whenever i format it it just does it really quickly like its not really doing anything
Cant soft reset the device
Cant shutdown
Device can no longer be detected
IPL 1.00
SPL 2.G£.4PDA
GSM 02.47.21
OS 4.0.0.0
Basically the os cannot boot properly therefore it cant be detected i need some sort of auto boot program
Can anyone help
try this..
http://forum.xda-developers.com/showthread.php?t=361335
Rivadex said:
Hi
I was using the "ROM for Prophet ShadoW 1.0 (Vista Edition)( Clean Edition )" and encountered numerous problems with this rom so decided to revert back to my previous rom "PDAVIET". I plugged my deviced in and attempted to run the "batch file" followed the dos cmd prompts and ended up with the frozen screen.
1. Hard reset does nothing it just shows the boot screen and freezes
2. Whenever i try to install a rom it says device is not detected
Here are some details
I was using the Prophet Shadow 1.0 VU
Trying to run upgrade_rom.bat from PV_4.0.0.0.6_Touch when it happened
HT PRophet
G3 Version
last hard reset was now (just after it happened) whenever i format it it just does it really quickly like its not really doing anything
Cant soft reset the device
Cant shutdown
Device can no longer be detected
IPL 1.00
SPL 2.G£.4PDA
GSM 02.47.21
OS 4.0.0.0
Basically the os cannot boot properly therefore it cant be detected i need some sort of auto boot program
Can anyone help
Click to expand...
Click to collapse
Hey hey~~~
GO HERE, have a look
http://forum.xda-developers.com/showthread.php?t=353547
hi
Thanks guys, i am unable to move any files on my device because i can now only get the rainbow screen. My phone cannot be detected by active sync.
When i try to run an RUU it does a little more then it previously did in terms of shpwing me the percentage bar (installation process) but my rainbow screen turns off and then i get an error message.
Now the rainbow screen appears every few minutes on its own and goes off again.
Am i misunderstanding what your saying?
Rivadex said:
hi
Thanks guys, i am unable to move any files on my device because i can now only get the rainbow screen. My phone cannot be detected by active sync.
When i try to run an RUU it does a little more then it previously did in terms of shpwing me the percentage bar (installation process) but my rainbow screen turns off and then i get an error message.
Now the rainbow screen appears every few minutes on its own and goes off again.
Am i misunderstanding what your saying?
Click to expand...
Click to collapse
GO HERE, have a look
http://forum.xda-developers.com/showthread.php?t=353547
read all !!!!
Run PVtemp to recover...................................
Thanks for your help. I will have a look tomorrow because even though i am reading your instructions i am still not understandingh it.
1. The first method isnt possible because i cannot see the device to move files into it
2. With the second method i cannot find the PVTemp you mention
I am not too good with this so it will take time for me to get what your saying.
Thanks again - i will charge my phone overnight to make sure my battery is ok
Update: Phones now working fine, it was my battery that needed charging
Thank you dioxda2 and duato for your help
Related
I have a type 2a brick where it hangs on the the carrier boot screen. I followed the directions and installed windows 5.0 ce and using platform builder I sync my device and the screen stays white I left it run its full processes till it stopped. Yet my screen still hangs white. I soft reset the device and now it hangs on the Windows Mobile boot screen. So it did progress from its original problem. I havent had time to troubleshoot further. Just curious on what I can do. If anyone has any suggestions please share.
IPL???
SPL???
NO GSM???
KITL enabled or not????
IPL
SPL 1.04
NoGSM
Kitl is enabled
Im sorry im at work. I cant remember the IPL. I will edit when I get home
Hermes unbrick
C Brown said:
I have a type 2a brick where it hangs on the the carrier boot screen. I followed the directions and installed windows 5.0 ce and using platform builder I sync my device and the screen stays white I left it run its full processes till it stopped. Yet my screen still hangs white. I soft reset the device and now it hangs on the Windows Mobile boot screen. So it did progress from its original problem. I havent had time to troubleshoot further. Just curious on what I can do. If anyone has any suggestions please share.
Click to expand...
Click to collapse
If your screen hangs in white screen - delete ril.dll . Must be work. After complete boot don't forget to run sspl-hermes.exe from card . Next step flash a complete original carrier rom (os +radio) , after this - hardspl7 and after flash what you want. Good Luck!
edrin said:
If your screen hangs in white screen - delete ril.dll . Must be work. After complete boot don't forget to run sspl-hermes.exe from card . Next step flash a complete original carrier rom (os +radio) , after this - hardspl7 and after flash what you want. Good Luck!
Click to expand...
Click to collapse
Thank you sooo much. I have the phone booting up I just need the right rom to flash it. I keep getting a invalid vendor ID
Okay. So I managed to make it through the original HTC Q-tek 1.18 rom. It still freezes at the windows mobile boot. Any ideas!?!?!?!? I reconnected it to PB and it booted fine. Once it was fully booted I disconnected it and it was working fine. Flashed hardsplv7 and managed to get shamanix 2.1 and now its froze on the windows mobile boot screen again. Im going to run through the process again to see if I can fix it.
I dont know how this happened but my Kitl was disabled. it there anyway I can get it back its the only was I can get my phone to boot.
hey there been a member for sometime and have tried to search for a solution to my problem and am abit confused.
and sorry if its such a newb question (dont burn me for it)
i have an o2 atom exec (using RC3 rom with touchflo) and yesterday i /soft reseted/ the phone because it was acting funny, after the reset it would be stuck at the startup screen and would not load past that the whole day, so i waited and re-tried in the evening.. the same thing occured... i was at the time able to load into bootloader (MN2) but then could do nothing else.. so i searched throughout the forums and found a post by 'chartreux' http://forum.xda-developers.com/showthread.php?p=1684559&highlight=EBOOT.NB0 but had not read the entire post and proceeded to load (mn1) onto my phone via mini sd card and it worked, my phone was working again, it performed a hard reset and restored it to factory settings (ie: calendar, msgs, contacts, software all gone) and phone is working normally again... since it has done this i wanted to update to 'wm6.1 atom exec rom' just to be up-to-date and have synced it via activesync and have run "DSUU" but my phone just restarts and loads the current rom i have installed! and just repeats everytime i have tried (have tried atleast 50 times)
so my main question.. is my bootloader dead? i know my phones not bricked since its still working perfectly im just not able to upgrade my ROM but can still do everything else (such as browse through files, run programs, make calls)
and last of all.. can anybody please help?! as i am at the point running the phone over with my car!
and once again am sorry for the stupid question.. =/ and thanks for hearing me out!
cheers!
stylistik said:
hey there been a member for sometime and have tried to search for a solution to my problem and am abit confused.
and sorry if its such a newb question (dont burn me for it)
i have an o2 atom exec (using RC3 rom with touchflo) and yesterday i /soft reseted/ the phone because it was acting funny, after the reset it would be stuck at the startup screen and would not load past that the whole day, so i waited and re-tried in the evening.. the same thing occured... i was at the time able to load into bootloader (MN2) but then could do nothing else.. so i searched throughout the forums and found a post by 'chartreux' http://forum.xda-developers.com/showthread.php?p=1684559&highlight=EBOOT.NB0 but had not read the entire post and proceeded to load (mn1) onto my phone via mini sd card and it worked, my phone was working again, it performed a hard reset and restored it to factory settings (ie: calendar, msgs, contacts, software all gone) and phone is working normally again... since it has done this i wanted to update to 'wm6.1 atom exec rom' just to be up-to-date and have synced it via activesync and have run "DSUU" but my phone just restarts and loads the current rom i have installed! and just repeats everytime i have tried (have tried atleast 50 times)
so my main question.. is my bootloader dead? i know my phones not bricked since its still working perfectly im just not able to upgrade my ROM but can still do everything else (such as browse through files, run programs, make calls)
and last of all.. can anybody please help?! as i am at the point running the phone over with my car!
and once again am sorry for the stupid question.. =/ and thanks for hearing me out!
cheers!
Click to expand...
Click to collapse
what version of your bootloader now? MN2 or MN1? if still MN1 please read again the thread to update your bootloader to MN2 (since your device is ATOM EXEC).
and after done, please check when you run DSUU, see on the left bottom whether have a drop down box or not? if yes then choose "ALL"
hope this can help to solve your problem.
hey! thanks for the reply mate!
but im not sure i cant check the version of my bootloader...
wont let me get into it by pressing camera+SR or camera+off button..
just boots straight into the operating system.
and, as for the DSUU it just restarts the phone after i choose all, and goes through to the today screen on the phone, and as for the DSUU update its stays at the screen which shows "The current software is now being updated from your device."
followed by an error appearing after a few minutes showing " No download target was found!!" even though my atomexec is synced
which is then followed by the "connection error" screen.
please help.. this is seriously pissing me off...
stylistik said:
hey! thanks for the reply mate!
but im not sure i cant check the version of my bootloader...
wont let me get into it by pressing camera+SR or camera+off button..
just boots straight into the operating system.
and, as for the DSUU it just restarts the phone after i choose all, and goes through to the today screen on the phone, and as for the DSUU update its stays at the screen which shows "The current software is now being updated from your device."
followed by an error appearing after a few minutes showing " No download target was found!!" even though my atomexec is synced
which is then followed by the "connection error" screen.
please help.. this is seriously pissing me off...
Click to expand...
Click to collapse
try to downgrade again your bootloader to MN1 (please do it step by step). as long you can secure your bootloader, hopefully you can resolved your problem.
remember to upgrade again to MN2 once you able to downgrade to MN1 before try flashing to wm6.1.
good luck.
still cant access bootloader.. even when trying DSUU it just boots straight into the operating system, when trying to update and also i tried the MN1 bootloader again and tried to get into it... still nothing.. it just resets, i tried it with my 4GB mini sd, 2gb msd, and a 64mb mini sd.. could not get into it... sigh...
Ok try a deep breath and read all the posts on dead boatloaders and other upgrading problem posts through and through. Then try to change ur USB cable and what system are u using i.e XP or Vista????
thankyou kindly, for the suggestions i have been reading through alot of posts and tried alot but.. nothing so far.. i guess its not too bad since its stuck on windows mobile 6 with abusalzas rom..
im just annoyed i cannot upgrade to the latest 'rom' and since my phone 'had' to perform a hard reset why not update so yeh.. and i am using windows xp for my computers os.
Did u change the USB cable mate, once I had to do it and the interesting thing is that the same USB cable was working perfectly for other things but causing problems when connecting to my Atom Exec.
yeh tried it with my old v3 cable didnt work has the same outcomes.. sigh.. i might try that dead bootloader hardware and software recovery from this post by Alex_Beda & 1stMASTER
http://forum.xda-developers.com/showthread.php?t=336278
what you think?
although my phone doesn't resemble there symptoms list.. as it still works and everything just cant get into the damn bootloader.. :/ when done manually and when trying to upgrade..
Did u read this mate ?????
http://forum.xda-developers.com/showthread.php?t=358442
You just try the DSUU with upgrade "OS" only and not "ALL".
alright cheers buddy! ill try it out and i hope it works!!
bahh.. didnt work =( just restarted my phone and gave me a connection error screen on my computer....
Actually i have the same problem, i tried to get into the bootloader by press and hold camera + reset button it just restart and load the WM
Dead atom exec
My atom exec having problem ( dead ), so after press camera reset sw my atom can booting normaly but touch screen function only for entering password and then touch screen not response anymore. I check the system information by touch the button (manualy) but IMEI not ready and Radio not ready.
Pls someone can help us.
o2 atom bootloader
hello
my o2 atom bootloader screen mn1 dignostic manger screen remains after rom flashing .i tried flashig orginl rom and pedvit rom but bootloader screen comes again .not starting my mobile please help
I've tried to search to see if anybody has ever encountered a problem like this, but my search was in vain.
I was trying to upgrade ROM, I successfully load SPL 3.5, before it I was running AP dual 3.0. However after the installation the device rebooted and the started auto customisation. It installed SDAautorun and then SDConfig.txt but before this one completes, the device reset itself. It restarted and do the same process again and again, just restart and restart.
I tried all types of resets and I even tried to reinstall other roms that worked with the device before but nothing is any good. This is because when the device boots it load the SPL 3.5 (Windows mobile 6.1) instead of installing the ROM I'm trying to install.
I get a chance to do so as the device can still connect to the computer and it stops when it prompts to callibrate the screen (tap four corners and center of the screen)
Please help me if there is anything I could do to start using my device again. I appriciate any support in advance. It is very possible that I've messed up something somewhere but please once again do help me, even if the by telling me that my Ameo is a brick that would help me to know what I've got to do.
NB: My device is T Mobile Ameo (Athena, Advantage X7500)
hey guys, im having major issues with my HTC HD2.
I have upgraded my rom previously and it worked fine. i just did the telstra one off the htc website.
STATS:
os version: 5.2.21869 (21869.5.0.82)
manila version: 2.5.20121431.1
ROM version: 1.72.841.0 (82124) WWE
ROM DATE: 02/23/10
Radio version: 2.07.51.22_2
protocol version: 15.32.50.07U
I am now tryign to upgrade once more because im having software issues with my current set-up, hoping a rom upgrade will solve it. but, i cant upgrade my rom! i am using CustomRUU.exe as the host program for running the .nbh files. i have tried artemis's latest rom, radio uprgrades, andriod ports, maxsense cooked roms, everything! and i cant get it to get past this screen.
so the issue. i hook up my HTC HD2 to my computer connect via activesync, i then drag the chosen .nbh file on to CustomRUU.exe and run the file and the rom upgrade, im doing everything they say and my htc is hooked to the computer with the arrow things confirming. i do the acceptance steps, and it gets to the progress bar and sits a 0% (on my laptop) while my HD2 works through it.
it goes to the red green blue screen, says USB down the bottom, goes black and displays a HTC loading screen with a progess bar at 0%
this is where the issue is.
it stays at 0% for about 5-10 minutes, on BOTH the hd2 and the laptop, than the computer gives me an error code [262] : UPDATE ERROR...(i am aware that this is a connection error and should resolve with restarting for the computer and the device and a new usb port used)... but this has not solved my problem. as soon as my HD2 restarts and goes to the red green blue screen i lose connection with the computer and it times out. My HD2 just loads the htc progress bar screen and does nothing
i dont even get 1%!!!!
i have tried installing HSPL but it says i need sspl 1.42.000 (i think), so when i try to install that via a rom or whateva it is, it gives me the no connection freezing issue.
im stuck in a violent circle and get get past this issue.
basically, the rom uprgrade wont work because my device is apparently disconnected form the computer and the install times out.
someone please help! PLEASE!
im sorry if this is a simply fix and im being a noob, but i just am stuck real bad!
thanks in advance guys
ryan
start with HSPL!!!
ryan whitmore said:
I have upgraded my rom previously and it worked fine. i just did the telstra one off the htc website.
Click to expand...
Click to collapse
Changing to a customized ROM is very different from upgrading through HTC website , and it starts by installing HSPL on your phone..
you should start here
http://forum.xda-developers.com/showthread.php?t=609477
but its probably easier to resolve your current "SW issues" than installing a customized suitable ROM for you at this stage.. so why dont you post what the SW issue is instead.. (unless your phone does not boot at all now..)
rgds
just quickly, sw issues?
SW issues
ryan whitmore said:
I am now tryign to upgrade once more because im having software issues with my current set-up, hoping a rom upgrade will solve it.
Click to expand...
Click to collapse
software issues = SW issues
Depending on what your Software problems are you could try to post them and try to solve it.
The fastest ways is to install the right HSPL you can use the link in the post of "ugguggh" which has a good manual about how all works. You also can read through the 1st two posts in de threat displayed below. Here you cna find which HSPL you need for your version.
CLICK HERE!
After installing the right HSPL its just a matter of choosing your desired ROM and install it.
I'm currently working with the Artimis V27 ROM NL and i'm not experiencing any problems it runs very smooth. Just format your SD card and try to download Task29. First run "Task29" before installing the ROM. It cleans up old stuff from your old ROM install. After Task29 finished press volume down before it reboots your phone so you enter the bootloader. Now you can start the CustomRuu application and install your desired rom. (if you enter a blanc HTC screen after Task29 (thats normal because there is no OS to load anymore) just remove the battery and hold volume down while putting the battery back or using the power on button)
ryan whitmore said:
i am using CustomRUU.exe as the host program for running the .nbh files. i have tried artemis's latest rom, radio uprgrades, andriod ports, maxsense cooked roms, everything! and i cant get it to get past this screen.
so the issue. i hook up my HTC HD2 to my computer connect via activesync, i then drag the chosen .nbh file on to CustomRUU.exe
Click to expand...
Click to collapse
dont do that, put customruu and the nbh in a folder on their own, then right click customruu and choose run as administrator (do this even if you are logged in as administrator)
and run the file and the rom upgrade, im doing everything they say and my htc is hooked to the computer with the arrow things confirming. i do the acceptance steps, and it gets to the progress bar and sits a 0% (on my laptop) while my HD2 works through it.
it goes to the red green blue screen, says USB down the bottom, goes black and displays a HTC loading screen with a progess bar at 0%
this is where the issue is.
it stays at 0% for about 5-10 minutes, on BOTH the hd2 and the laptop, than the computer gives me an error code [262] : UPDATE ERROR...(i am aware that this is a connection error and should resolve with restarting for the computer and the device and a new usb port used)... but this has not solved my problem. as soon as my HD2 restarts and goes to the red green blue screen i lose connection with the computer and it times out. My HD2 just loads the htc progress bar screen and does nothing
i dont even get 1%!!!!
i have tried installing HSPL but it says i need sspl 1.42.000 (i think), so when i try to install that via a rom or whateva it is, it gives me the no connection freezing issue.
im stuck in a violent circle and get get past this issue.
basically, the rom uprgrade wont work because my device is apparently disconnected form the computer and the install times out.
Click to expand...
Click to collapse
use a usb port around back of the pc, not in the front case.
the 'you need 1.42.0000...' is wrong, its old info. Use hspl3 and choose 2.08.hspl
THANKYOU! but here are my sw issues
hey guys thankyou for all ur help, i downloaded hspl3 and it worked and i have tested a few different roms,, and i installed Miri_HD2_WM65_21908_Sense25_V17.0_WithSwype, which is working quite well right now and i am pretty damn happy with it so far.
i installed S2U2 and since then it started to play up a lil..
the issues are that in general the whole entire system is slow. not neccesarilly windows but sense... :\
messages are sometimes unusable, frozen very laggy, and occasionally needs a soft reset. phones is unusable, can make calls, just cant hear dialtone, microphone sender and recevier isnt working, NO SOUND! shortcut calender viewer on the sense homescreen takes mins to hours to load appointments and sometimes doesnt for days. and in saying sometimes is lightning quick...???
besides that i am not experiencing many other issues YET...i will have to wait a few more days. though i would really like a solution to the phone issue if that is possible
would love to beable to use a android port (a very good, everyday use version), and if anyone has any info on it, would u beable to post some for me please
i have tried haret and it wont work. i load clrcad then haret it runs through the first stuff, then the screen starts to fad and i get lines on the left then it slowly goes black and nothing happens. requires a soft reset to get the phone working again..
I AM JUST FULL OF ISSUES! sorry guys
anyways thankyou EVERYONE for all your help u have been great so far
thanx
ryan
Hey all, I am having trouble booting anything onto my HD2 everytime i boot the phone i get stuck on the (tri colour screen) "Hardspl" i think..
I am able to install original HTC roms and custom roms via USB and Serial but after i install them and it says installation complete when the phone restarts it just gets stuck on the "Hardspl" screen again??
Any help is appreciated thanks
Here are some images to help
http://img29.imageshack.us/g/dsc0007riq.jpg/
(UPDATED)
How do i remove hspl ive tried installing an offical rom from the SD card but i still boot into this screen ????
Try this........
Power off the phone (make sure your battery is over 50%)
Turn on while holding the vol. down button.
You should be at bootloader (three colour screen)
If you have HSPL installed you should see "cotulla" and "HSPL" on the bootloader somewhere.
If youve been flashing official roms though this may have uninstalled HSPL.
I couldnt get the screenshots you linked to...
You can attach image files using the "manage attachments" button down under the text entry area.. (i think)
Id suggest trying to flash a stock/official rom just now until you get up and running.
With the phone at bootloader you should see the word "serial" at the bottom of the screen....
Connect via USB and wait for "serial" to change to "USB", this could take a few minutes.......
When you see "usb" flash the ROM from your pc......
You should make sure that you have the correct ROM for your phone, go to the HTC site and pump in your serial number.
If you still have problems after this then post back here with any error messages you might get...
Hope that helps.....
Thanks for the reply, for the link you need to add (http ://) sorry i should have mentioned that
but i just finished doing what you told be and it finished installing. it had the HTC logo on phone with loading bar as on PC screen no errors :S but im still stuck on the tri colour screen
I originally had android booted onto this mobile but the 3G was not working so i tried installing the HTC wm 6.5 rom that I downloaded from the HTC website but it would not get out of the tri colour screen after i installed it.
So i though it may have been the hardspl its self so i updated the SLP from 2.05 to the 3.03 one im currently on but it does the same thing
Hmm ok...
So the flash finished all the wasy to 100% and there were no error messages..
then the phone rebooted and went to bootloader (3 colours)...??
Restarting the phone just keeps returning you to bootloader??
Try turning off then back on while holding down both volume buttons and see what happens.
Which model of HD2 do you have and which ROM did you flash??
Yes thats correct.
When i turn the device on wile holding vol up-down i get a grey screen to
"This operation will delete all your personal data, and reset all settings to manufacturer default. press vol up to restore or press any other keys to cancel"
and im not sure what HTC HD2 i have..
Model: T8585 ?
I flashed the latest rom from the HTC website using the S/N
"RUU_Leo_S_HKCSL_WWE_3.14.831.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
Okay, get to that screen and press volume up to continue, this will perform a hard reset which is recommended after a flash, your device should then boot up, may take a few minutes as its the first time..........
ok, It finished in like less then 10sec but there was not skips did from 1% - 100% smoothly and says "Restore....Completed Press VolUp to boot"
So i pressed volume up and once again stuck on the tri colour screen
any more suggestions or is my phone dead?
Hmmm
Phones not bricked because 95% of the time if you can get to bootloader the problem can be fixed........
I have the feeling this is something obvious that Im not picking up on.
Chances are someone else will see this and point out the obvious but at the minute I cant think why it might be doing that......
You could try flashing the ROM from SD card.
Rename the file on your PC to "leoimg.nbh" and put it on a 2gb/4gb sd card, turn the phone off, put the card in, turn on and it should flash........
Like I said, i dont think your phone is dead, I think Im missing something obvious....
its weird because i can install roms, hardspl's and all that stuff it knows the phone is there and installs them but for some reason it never gets passes the hardspl stage.. on each boot.
it accually boots into the tri colour screen in a split second of turning the phone on
Its a longshot but is there any possibility that your volume down button is stuck in the pressed position.........
yeah i have installed off the SD card already. that took awhile but it says everything is ok and installsion has completed.
same problem though once i restart tri-coloured screen pops up.
Im afraid Im not sure about this one...........
I'll keep thinking and let you know if anything occurs to me.....
Im sure someone else will chip in at some point and point out the issue though.
alright no worries thanks for the help and time hopefully someone knows what the problem is.
Maybe if i uninstall the Hardspl? might totally wreck it and 100% brick my phone if it fails but I think its the only option ill have left soon
uninstalling hspl shouldnt cause any harm........
I didnt realise you had HSPL installed, I take it you instaled that after flashing the stock rom??
If you have HSPL installed......
Try to install a custom rom, ie an energy rom, just as an experiment........
dunno if youve seen the images yet conan, but unless its changed since, the OP has 3.03.0000
also, if he has magldr installed ( i didnt see it mentioned, but..) when you hard reset it takes just a few seconds, because it is only hard resetting magldr (at least thats my understanding, and would offer a reason why hard reset is so quick)
I suspect incorrect 3,14 flash, which didnt complete so its returning to bootloader,
so, OP, bootloader - hspl4 - 3.03.hspl - flash your 3.13 rom again, over usb.
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
If this works im donating $20 to you right away no joke .. ive been trying to fix for 13hours straight
Australian icon said:
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
Click to expand...
Click to collapse
sd card flash, right?
Step 1 of the flash is the spl gets overwritten by the one in the leoing.nbh rom (3.03.0000 in this case) and then the phone reboots, and starts to flash , , splashscreen (where magldr is), radio, rom.
BUT, the phone wont allow the flash to start because hspl is now gone, so it fails CID checks and stops, so doesn't remove magldr, radio, rom, nothing, it just stops. Further attempts at flashing fail because you teh user haven't notived the spl change, you assume the whole flash failed, and that hspl is still there.
You shouldnt be able to get that far normaly, it would fail before it even starts, on a stock spl, except that hspl was there, so the flash was allowed to begin.
Ok, so its on SPL-3.03.HSPL now then I installed the latest HTC offical rom with USB but still no go
also if it is resetting magldr how come it doesent load up like it used to after a reset