Related
I've rooted my GT 10.1 but I have two questions that I can't find the answer.
1. Has anyone discovered how to unroot back to stock?
2. If rooted, will I be able to get the OTA of touchwiz by checking for updates under settings?
PS I flashed the TouchWiz UX found in this forum. Got to say it is really nice and I can't wait to get the version from Sammy. I then restored a backup using Rom Manager and restored fine except when checking for software updates. It used to say no update available, but today it says failed to connect to servers. Anyone else getting this error?
I guess that is actually 3 questions.
Thanks
1. Unrooting is pretty simple. Just flash the 3.1 OTA in the dev forum, after doing a full wipe. If you feel the need to go back to full stock, you'll also want to nvflash back to the original retail recovery, which you undoubtedly saved when you first rooted.
2. No one knows yet, but rest assured, within a day (less probably) of the update being released, it'll be available here as a rooted flashable ROM. If you learn one thing from your time on XDA, it should be "never accept an OTA update." Let the devs pull it apart and repackage it in a nice root-safe download.
Undoubtedly! (I wish) I wasn't planning to root but while playing with Odin, I thought I was locked at the downloading screen while testing odin. (Didn't hold down the power button long enough to shut off tab) I thought my only solution was to continue and root. No problems rooting, it was easy. I just wanted to make sure I get the TouchWiz update. Now I learned my lesson I will never do an OTA update.
Glad you told me that, otherwise I probably would have screwed up my GT. I don't know how I missed the post about backing up the stock image first. I try to read a lot of posts (heck I even use the search box) before trying something new. Anyway, I'm sure it is posted in the forums somewhere if I need to find it.
Thanks!
pmsrefugee said:
Glad you told me that, otherwise I probably would have screwed up my GT.
Click to expand...
Click to collapse
It's not so much that you'll screw up your device by accepting an OTA, but rather that you might lose root and/or your custom recovery (perhaps permanently). Nevertheless, there are some cases of OTAs screwing up devices when accepted over non-stock installs, so IMHO its always best to wait for a flashable ROM.
pmsrefugee said:
I don't know how I missed the post about backing up the stock image first. I try to read a lot of posts (heck I even use the search box) before trying something new. Anyway, I'm sure it is posted in the forums somewhere if I need to find it.
Thanks!
Click to expand...
Click to collapse
Yes, I believe the stock retail recovery is posted in the CWM recovery download package here: http://forum.xda-developers.com/showthread.php?t=1130574. You'll note that Step 3 is where you were advised to backup your original stock recovery, although the step is (correctly) noted as optional. No big deal, in any event. Glad I could help.
Please bear with me
OK I have a rooted Dx2 ver. 2.3.3 i need to send in my Dx2 for replacement but Verizon told me they won't unless i have the current vers. of GB 2.3.4.
To unroot there is an app in the market that will remove it completely, including all the symbolic links, its called Ginger Unroot.
Ginger Unroot did the trick, i re-installed all the bloat ran Ginger Unroot, but i missed unfreezing 2 files i think they were "update" and "updater".
So when i went to settings - about phone - System Updates, but it does not work.
So i screwed up now i just want to root the phone and if the files are still there, unfreeze the the 2 files and unroot again and d/l the 2.3.4 OTA.
Here's where i really need help i was going to use Gingerbreak to root but i found out it is no longer supported i think it is because i'm running 2.3.3
I have been searching for days on what to do and all i have found out there does not appear that a one click root does not exist.
I have heard that i might have to SBF back to froyo??
Can i do it on a mac?
i'm worried that i will need to do it on a pc.
Also what version of windows do i need to use?
If i have to SBF can i d/l the files and go to an internet cafe or kinkos and use a pc to do this?
Here's an example are the drivers for the phone or are they meant to be run on a pc, would an internet cafe or kinkos let me do this installing software on their computers.
*Install the necessary moto drivers*
* Motorola_End_User_Driver_Installation_5.1.0 32bit or 64bit depending on your computer's CPU architecture
First do you know if i do gain root again will the 2 files show up or have they been
deleted, gone forever.
If this is the only way, can someone tell me exactly what i need to do. I don't want to try to follow any posts because if im at a kinkos or someplace i can access a pc. i don't want to wind up getting stuck or not understanding something.
If i can get to a pc i see that you need to use terminal commands, if i have to do it that way i'll be lost and screw up something.
Please help i don't want to get to a place that i might not fully understand
In other words a Dumbed down set of instructions.
I'm not knocking forums but because of my disability i get lost and frustrated with all the info you can find. I really need to get any help from one person, i get very confused easly
Which method do you recommend/easies: It seems Wugfresh has a one click vers. which is still confusing. I have come across other posts on how to reroot which is making it nearly impossible to follow.
I have ADD and i'm ready to give up and hope i can tell Verizon it won't update and won't discover the 2 missing files, do you think if i just tell them it won't update, and having removed any signs of it was rooted, do you think i can get away with this "playing dumb" cus so far over the past 2 weeks i have gotten responses from my posts that don't help, i just get told to "see this post" and tell me to try this or that.
Click to expand...
Click to collapse
I am really burned out, please tell me what you recommend.
To be frank i would just like to return it as is, do you think i can get away with this?
Thanks
sknoxx
Doing an sbf is probably going to be your best bet. Check stickies there should be info on sbfing on a Mac.
This thread on rootzwiki may have some useful info for you.
http://rootzwiki.com/topic/1948-is-there-a-way-to-sbf-from-mac/
Sent from my DROID X2 using xda premium
A sbf will solve your problems and I believe it can work with any software mine is vista. Go to the development section first post from booked and he has all the files you need. Use Pete's one click root very easy. Don't give up you will just have to read some.
Hey there! Welcome in! Got to my tutorial thread here: HowTo: Perform a SBF ("factory restore") of your Motorola Droid X2. This will walk you through, step by step, how to perform an SBF restore. If you have questions, either post them in that thread, or PM me. It's simple and straight forward.
Please go here now: http://forum.xda-developers.com/showthread.php?t=1653777
Mods should unsticky mine and sticky that instead.
Go to the above link if your a victim of virgin mobile firmware.
since the other thread got shut down before i got a response, i will repost now.
I flashed the original fix that was posted a few days ago and it worked great until today. I got my first radio interface error since the pri downgrade. Does this mean if i want to fix my issues completely i should go through these new downgrade instructions? I don't really care about a banner (or even roaming at the moment), since i am assuming an official sprint firmware update will come very soon. The only thing that i need right now to work is my texting. Any suggestions on doing the bare minimum to hold me over till the official firmware is released?
hockey4life0099 said:
since the other thread got shut down before i got a response, i will repost now.
I flashed the original fix that was posted a few days ago and it worked great until today. I got my first radio interface error since the pri downgrade. Does this mean if i want to fix my issues completely i should go through these new downgrade instructions? I don't really care about a banner (or even roaming at the moment), since i am assuming an official sprint firmware update will come very soon. The only thing that i need right now to work is my texting. Any suggestions on doing the bare minimum to hold me over till the official firmware is released?
Click to expand...
Click to collapse
So you have no data at all? I'd try a ##data# reset first.
hockey4life0099 said:
since the other thread got shut down before i got a response, i will repost now.
I flashed the original fix that was posted a few days ago and it worked great until today. I got my first radio interface error since the pri downgrade. Does this mean if i want to fix my issues completely i should go through these new downgrade instructions? I don't really care about a banner (or even roaming at the moment), since i am assuming an official sprint firmware update will come very soon. The only thing that i need right now to work is my texting. Any suggestions on doing the bare minimum to hold me over till the official firmware is released?
Click to expand...
Click to collapse
Never assume. Just because VM has a different firmware, that doesn't mean that Sprint 3d's will too. We do not fully know what the differences are between the 2 devices.
Thus the reason for this and other fix threads. I would suggest trying this fix, and see if it helps, and hope that there is a firmware fix in the future.
I will tell you how I restored my data. I first downloaded the following stock rom.
Stock 2.08.651.2 With HTC/Sprint Spyware Removed
http://forum.xda-developers.com/showthread.php?t=1285975
After flashing to the stock rooted rom above I then went into my dialer and typed in ##my MSL number# (Example: ##000000#) To get your MSL number simply download MSL reader from the market. I then clicked on edit and then edited my MDN with all zeros and MSID with all zeros. I pressed the menu button and then pressed reset. After the phone rebooted the phone activation screen came up when I unlocked the phone and it was able to automatically activate it and I got 3G data.
jlechner said:
So you have no data at all? I'd try a ##data# reset first.
Click to expand...
Click to collapse
no, i have data ussually. I have found though every once in a while my sms messages will not send (with a radio interface error). When this happens, my phone will show a signal, but calls, sms, and data will not work until i do a profile or a prl update. then my phone will work normally again until it decides it wants to crap out yet again.
hockey4life0099 said:
no, i have data ussually. I have found though every once in a while my sms messages will not send (with a radio interface error). When this happens, my phone will show a signal, but calls, sms, and data will not work until i do a profile or a prl update. then my phone will work normally again until it decides it wants to crap out yet again.
Click to expand...
Click to collapse
This is the issue some are having. I would say it's because of the VM firmware we flashed. Did you try the PRI version downgrade that takes you back to 003 even though it shows 005? or does yours still say 004?
hockey4life0099 said:
no, i have data ussually. I have found though every once in a while my sms messages will not send (with a radio interface error). When this happens, my phone will show a signal, but calls, sms, and data will not work until i do a profile or a prl update. then my phone will work normally again until it decides it wants to crap out yet again.
Click to expand...
Click to collapse
Hockey, I have not seen this issue yet on my rom, PM me if you want to try mine, and let me know if you see any difference. I wonder if some of the SMS issues have to do with the ICS rom itself. BTW do not post my ROM anywhere as I do not release my stuff public, just want to help out a fellow hardcore flasher.
Cheers
jlechner said:
This is the issue some are having. I would say it's because of the VM firmware we flashed. Did you try the PRI version downgrade that takes you back to 003 even though it shows 005? or does yours still say 004?
Click to expand...
Click to collapse
i flashed chads first firmware downgrade. My phone now shows that my PRI is 1.53_145. This worked for like 3 days, but here i am again with the same issue
Freeza or Unknownforce, I have a guy getting a replacement phone tomorrow. He wants to help. I figured we could have him pull the partitions, please advise.
hockey4life0099 said:
i flashed chads first firmware downgrade. My phone now shows that my PRI is 1.53_145. This worked for like 3 days, but here i am again with the same issue
Click to expand...
Click to collapse
Touch base with Mikey.
hockey4life0099 said:
i flashed chads first firmware downgrade. My phone now shows that my PRI is 1.53_145. This worked for like 3 days, but here i am again with the same issue
Click to expand...
Click to collapse
Oh perhaps you need to be on PRI version 1.42_003? I never ran into issues on chad's downgrad PRI either though.
This thread can't be deleted. This has good info we need up.
I know it says Chad in it, but should we just take the name out?
Well, if we did, then we won't give credit where it's due.
Anyways,
Is there any general thought on the rough percentage of people this works 100% for?
Mikee4fun said:
Oh perhaps you need to be on PRI version 1.42_003? I never ran into issues on chad's downgrad PRI either though.
Click to expand...
Click to collapse
is there a way to get to 1.42_003?
Thank god there's another one of these!
Ok so I got back from sprint again and the were totally in awe and had no idea whatsoever was wrong with my phone They ordered me a new one and it'll be here on like tuesday or wednesday and i'll see if I can get it not activated already.
Btw the sprint people are totally dumb.... They were talking to a couple and saying yeah, the more storage a phone has the faster it'll be! He said that 32gb phones out performed 16gb phones.... I was like wtf man... Also he was trying to sell them the galaxy s 2's and was telling them that they're new phones. Wtf sprint salesman, wtf...
hockey4life0099 said:
is there a way to get to 1.42_003?
Click to expand...
Click to collapse
The 005 mod is actually 003, from my understanding.
Sent from my Sprint/Virgin Mobile hybrid.
jlechner said:
Freeza or Unknownforce, I have a guy getting a replacement phone tomorrow. He wants to help. I figured we could have him pull the partitions, please advise.
Click to expand...
Click to collapse
Thanks, but I think we have everything we need at this point. I'm writing code right now for the patching part of the process. Not that I have everything that I need just yet, but at least getting that part out of the way for when I do have the correct information.
I've located everything that I have to change in my own partition to fix it (All the differences) next I'm going to compare these offsets with those of the partitions that freeza gives me and see if they line up the same... there's going to be some major coding needed for this, because it did manipulate some of the "flow" I think in the way it lists out certain information in the file, like rom name, and phone number and stuff...
I'm not the fastest coder, but I have basically all I need at this point for my own device... I just want to verify that it's similar code on others' devices as well before I get too far ahead of myself here and have to backtrack. I'm actually going to re-code the downgrade tool to make it part of that, probably rename it to a "multitool" of some kind and simply put it into the already stickied thread, and have closeone update his cd with it so that people can do this with ease.
The best part of this all is that the bricking process isn't going to be a stupid timing thing like it is when downgrading... a single command can brick an already S-OFF phone the way we need it. So no confusing timing issues with this one! Just a nice easy set of instructions. Phew.
Short and sweet basic steps right now:
1.) Nand Backup
2.) Brick
3.) Run "multitool" Plug unplug, yadda yadda.
4.) Boot phone back up to 1.40 S-ON
5.) Run 1.13 RUU
6.) Revolutionary S-OFF
7.) Flash 2.17 Firmware
8.) Flash recovery
9.) Restore Backup
10.) Drink Beer
More details to follow.
hockey4life0099 said:
is there a way to get to 1.42_003?
Click to expand...
Click to collapse
Yes, you need to go through the adb push process stated in the OP. I can assist you if you want through team viewer if you don't want to tackle it.
Unknownforce said:
Thanks, but I think we have everything we need at this point. I'm writing code right now for the patching part of the process. Not that I have everything that I need just yet, but at least getting that part out of the way for when I do have the correct information.
I've located everything that I have to change in my own partition to fix it (All the differences) next I'm going to compare these offsets with those of the partitions that freeza gives me and see if they line up the same... there's going to be some major coding needed for this, because it did manipulate some of the "flow" I think in the way it lists out certain information in the file, like rom name, and phone number and stuff...
I'm not the fastest coder, but I have basically all I need at this point for my own device... I just want to verify that it's similar code on others' devices as well before I get too far ahead of myself here and have to backtrack. I'm actually going to re-code the downgrade tool to make it part of that, probably rename it to a "multitool" of some kind and simply put it into the already stickied thread, and have closeone update his cd with it so that people can do this with ease.
The best part of this all is that the bricking process isn't going to be a stupid timing thing like it is when downgrading... a single command can brick an already S-OFF phone the way we need it. So no confusing timing issues with this one! Just a nice easy set of instructions. Phew.
Short and sweet basic steps right now:
1.) Nand Backup
2.) Brick
3.) Run "multitool" Plug unplug, yadda yadda.
4.) Boot phone back up to 1.40 S-ON
5.) Run 1.13 RUU
6.) Revolutionary S-OFF
7.) Flash 2.17 Firmware
8.) Flash recovery
9.) Restore Backup
10.) Drink Beer
More details to follow.
Click to expand...
Click to collapse
Cool thanks!
Sent from my Sprint/Virgin Mobile hybrid.
Please forgive me if there are other threads.. But this is an old phone and al ow-activity device...
I bought a Verizon Mogul from ebay. Was working just fine until I decided I wanted to flash a ROM onto it. The ONLY tool I could fine from any tutorial was some titan unlock tool... All it seemed to do was bring me to the bootloader. Well, now I'm stuck in the bootloader and can't get out. I tried this exit bootloader program for Windows, but it doesn't think my phone is actually plugged in (not compatible with Windows 7?)
Other threads have suggested using some kind of .nbh file, but there is no region of the internet of which this mysitcal file exists. What do I do?
And finally... can someone provide the files needed that every tutorial says you need to flash a rom on this phone? They don't seem to exist on the internet either.
I realize this phone is old. But I like it because I can use it without a data plan
Thank you to anyone who helps.
There are some tutorials - I'll look to see what I have later. I haven't used this phone in awhile
Dr. Hax said:
I realize this phone is old. But I like it because I can use it without a data plan
Thank you to anyone who helps.
Click to expand...
Click to collapse
Did you get it figured out there?
I've recently purchased a Thunderbolt from eBay (which I know is always a bit sketchy, and that the device is getting a bit older) but so far it's been a relatively good little phone. I'm definitely enjoying the LTE over the 3G my iPhone 4 had before I accidentally murdered it. I have the HTC Dev unlock on this phone, but the stock ICS rom pushed out by Verizon and HTC feels bloated and slow to me, having come from the iPhone 4 running a jailbroken iOS 6.1.2.
Would someone be so kind as to point me towards a fast, stable ICS or Jellybean ROM and instructions on how to install it and a proper recovery on my phone? I'm not all that picky about appearances, and I wouldn't mind running stock Android either if someone can tell me how to get it running on this phone. Currently I'm running all of the latest updates courtesy of the previous owner (I'm up to HBOOT 1.08, ICS 4.0.4, software version 7.02.605.10 710RD).
Thanks in advance for any help you can provide.
EDIT: After much more tinkering, I have managed to get Clockwork Mod Recovery running on my phone, but I would still very much appreciate if someone had a suggestion for a ROM that runs quickly and efficiently.
Look through the Development forum here and head over to Infected Roms. Lots of answers to your questions in both places. Just takes a little time go through the threads to find what you need.
Sent from my ADR6400L using Tapatalk 4
Raddatzjos said:
I've recently purchased a Thunderbolt from eBay (which I know is always a bit sketchy, and that the device is getting a bit older) but so far it's been a relatively good little phone. I'm definitely enjoying the LTE over the 3G my iPhone 4 had before I accidentally murdered it. I have the HTC Dev unlock on this phone, but the stock ICS rom pushed out by Verizon and HTC feels bloated and slow to me, having come from the iPhone 4 running a jailbroken iOS 6.1.2.
Would someone be so kind as to point me towards a fast, stable ICS or Jellybean ROM and instructions on how to install it and a proper recovery on my phone? I'm not all that picky about appearances, and I wouldn't mind running stock Android either if someone can tell me how to get it running on this phone. Currently I'm running all of the latest updates courtesy of the previous owner (I'm up to HBOOT 1.08, ICS 4.0.4, software version 7.02.605.10 710RD).
Thanks in advance for any help you can provide.
EDIT: After much more tinkering, I have managed to get Clockwork Mod Recovery running on my phone, but I would still very much appreciate if someone had a suggestion for a ROM that runs quickly and efficiently.
Click to expand...
Click to collapse
I just mashed my Rezound, so I'm back on the TBolt as well and had to go through the same thing. Before I go all out on this, I can tell you that the process to get this done isn't that bad considering I will compile all the instructions here, but you have to flash a patch through HBOOT then relock the phone, take it back to an older ROM, run revolutionary on it for s-off, load radios, then back to ICS lol. If you think it will be worth it to you, let me know an I will post the links. It's just a bunch of back and forth and I took me about a week to find all the pieces.
FirePsych said:
Look through the Development forum here and head over to Infected Roms. Lots of answers to your questions in both places. Just takes a little time go through the threads to find what you need.
Sent from my ADR6400L using Tapatalk 4
Click to expand...
Click to collapse
Yeah, there's a lot of pages to go through, and apparently I'm not searching for something the right way.
DiaboliqAngel said:
I just mashed my Rezound, so I'm back on the TBolt as well and had to go through the same thing. Before I go all out on this, I can tell you that the process to get this done isn't that bad considering I will compile all the instructions here, but you have to flash a patch through HBOOT then relock the phone, take it back to an older ROM, run revolutionary on it for s-off, load radios, then back to ICS lol. If you think it will be worth it to you, let me know an I will post the links. It's just a bunch of back and forth and I took me about a week to find all the pieces.
Click to expand...
Click to collapse
Hey, works for me! I really want to like Android, but Verizon's firmware is so bloated and slow it makes it hard to do. I'm willing to go through the work if it means I can get a phone that runs the way I want.
My cousin keeps telling me I need to run pure Android, and honestly, that's what I'd like to do if at all possible, but any ROM that runs efficiently is good for me.
Raddatzjos said:
Yeah, there's a lot of pages to go through, and apparently I'm not searching for something the right way.
Hey, works for me! I really want to like Android, but Verizon's firmware is so bloated and slow it makes it hard to do. I'm willing to go through the work if it means I can get a phone that runs the way I want.
My cousin keeps telling me I need to run pure Android, and honestly, that's what I'd like to do if at all possible, but any ROM that runs efficiently is good for me.
Click to expand...
Click to collapse
Go to this page to start the journey http://www.thunderboltforums.com/forum/htc-thundebolt-hacking-guides/8695-guide-how-gain-root-s-off-after-taking-ics-ota.html and just FYI, I use 4ext recovery now and love it, but you have to be s-off and rooted to get it. use the QR code found here http://forum.xda-developers.com/showthread.php?p=31966447 It will download and app to your SD card (typically) under "Downloads" and you will need a file manager or root explorer to install it, and I had to download "4EXT Recovery Touch v1.0.0.5 RC5" twice before it took.
Then once you have gone through those steps (I had TWRP recovery and it worked) you will be on GB. To save some time, go to http://forums.infectedrom.com/ and create an account. I doesn't have to be verified by the admin to download. Once your account is created, go to http://forums.infectedrom.com/showthread.php/1912-ROM-Official-Thunderbolt-ICS-Rooted-Deodexed-Stock?p=67120&viewfull=1#post67120 and download the radio and flash it, then download the ROM of your choice. I used the "DEBLOATED Rom Deodexed version: 7.02.605.10 710RD". It's stock with all of the VZW crap pulled out and deodexed. I'm haveing to revert back to a custom GB ROM because the new ICS kernel doesn't have the built-in support for the 2-way call recording feature, but everything else works like a dream. I agree, that for the TB, staying close to stock on ICS is a good idea since development has dwindling for this device. Cheers and let me know if you need any help with this. just reply here
DiaboliqAngel said:
Go to this page to start the journey http://www.thunderboltforums.com/forum/htc-thundebolt-hacking-guides/8695-guide-how-gain-root-s-off-after-taking-ics-ota.html and just FYI, I use 4ext recovery now and love it, but you have to be s-off and rooted to get it. use the QR code found here http://forum.xda-developers.com/showthread.php?p=31966447 It will download and app to your SD card (typically) under "Downloads" and you will need a file manager or root explorer to install it, and I had to download "4EXT Recovery Touch v1.0.0.5 RC5" twice before it took.
Then once you have gone through those steps (I had TWRP recovery and it worked) you will be on GB. To save some time, go to http://forums.infectedrom.com/ and create an account. I doesn't have to be verified by the admin to download. Once your account is created, go to http://forums.infectedrom.com/showthread.php/1912-ROM-Official-Thunderbolt-ICS-Rooted-Deodexed-Stock?p=67120&viewfull=1#post67120 and download the radio and flash it, then download the ROM of your choice. I used the "DEBLOATED Rom Deodexed version: 7.02.605.10 710RD". It's stock with all of the VZW crap pulled out and deodexed. I'm haveing to revert back to a custom GB ROM because the new ICS kernel doesn't have the built-in support for the 2-way call recording feature, but everything else works like a dream. I agree, that for the TB, staying close to stock on ICS is a good idea since development has dwindling for this device. Cheers and let me know if you need any help with this. just reply here
Click to expand...
Click to collapse
Excellent! Thank you for this. I guess I know what my project is for tonight.
Raddatzjos said:
Excellent! Thank you for this. I guess I know what my project is for tonight.
Click to expand...
Click to collapse
No problem, and if you need any help or it's unclear, just let me know. Oh, and if I helped you out, please hit the "Thank" button on that post Cheers
Yeah, I strongly recommend ditching clockwork mod for 4ext.
Sent from my ADR6400L using Tapatalk 2
Shadow Death said:
Yeah, I strongly recommend ditching clockwork mod for 4ext.
Sent from my ADR6400L using Tapatalk 2
Click to expand...
Click to collapse
I've been attempting to do just that, and every time I try to load my recovery, I keep getting ClockworkMod. 4ext fails to install, despite the app saying it was successful.
Raddatzjos said:
I've been attempting to do just that, and every time I try to load my recovery, I keep getting ClockworkMod. 4ext fails to install, despite the app saying it was successful.
Click to expand...
Click to collapse
Email the Dev. He's extremely responsive and very helpful.
Sent from my ADR6400L using Tapatalk 2
Raddatzjos said:
I've been attempting to do just that, and every time I try to load my recovery, I keep getting ClockworkMod. 4ext fails to install, despite the app saying it was successful.
Click to expand...
Click to collapse
I don't quite remember how I got to the end result of 4ext actually working but I remeber I had to download it twice from the installer app, and told the app to wipe cache + dalvik... but just to make sure, check these steps:
1) make sure you're rooted with s-off and have SU and busy box installed.
2) download the updater app file from the link provided in the QR code (from previous post).
3) make sure "unknown sources" is enabled in settings so you can install the updater app, then find the app in your download folder on your SD card and install it.
4) open the updater app and give it SU permissions, then run the install/update option and select the proper file. This will also be stored on your SD card (in a 4ext folder I think...don't quote me on that though).
after install you should be good, but I believe you can push via ADB as well. Attached is a PDF from the Dev on this as well.
---------- Post added at 12:32 PM ---------- Previous post was at 12:26 PM ----------
Sorry, I guess the PDF was too large. just remove the "http://forum.xda-developers.com/" out of the link and replace it with "http://www.". http://forum.xda-developers.com/4ext.net/install.pdf I can't post external links yet.
Now that I am thinking about it. Did you update super user or super su after getting root? The app itself probably needs it and the binary as well. You can update the binary by opening the app. It should prompt you to update it.
Sent from my ADR6400L using Tapatalk 2