Hi all,
I've try to upgrade my 200i to WM6 and after that I get this problem.
First I try to find something looks like my problem, but most people can see the collored screen or bootloader.
I can get nothing on screen, only the light!
If I connect the device can read via Active Sync!
What to do!
I'll be gratefull for any halp!
Thank You
meshuggah said:
Hi all,
I've try to upgrade my 200i to WM6 and after that I get this problem.
First I try to find something looks like my problem, but most people can see the collored screen or bootloader.
I can get nothing on screen, only the light!
If I connect the device can read via Active Sync!
What to do!
I'll be gratefull for any halp!
Thank You
Click to expand...
Click to collapse
see my thread... in my signature
dioxda2 said:
see my thread... in my signature
Click to expand...
Click to collapse
Thank You VM for the quick answer, dioxda2!
Sorry but one more question. Because I still can't get the "three color screen" and want to feel not worry : Based only of these symptoms (I can PWR On/Off and read via Active Sync the device ) Am I kill it or not!?
.
BEst Regards
& Thanks
George
Hi dioxda2,
Just a quick thanks to your guide... My pc had crashed while i was flashing my Jamin at 95%
Thanks again!
meshuggah said:
Thank You VM for the quick answer, dioxda2!
Sorry but one more question. Because I still can't get the "three color screen" and want to feel not worry : Based only of these symptoms (I can PWR On/Off and read via Active Sync the device ) Am I kill it or not!?
.
BEst Regards
& Thanks
George
Click to expand...
Click to collapse
can't get the "three color screen" ????
read my post 1 to the link in my signature..............
dioxda2 said:
can't get the "three color screen" ????
read my post 1 to the link in my signature..............
Click to expand...
Click to collapse
Sorry to bother you again, dioxda2
but looks like i'm realy fool !!!
I memorize your post!!!!
I can light the screen using PWR and turn off holding it! ( blanc screen only the light) Do you mean I must use the "Tradition (OLD) method" , because I already done it without success! ( The flashing stops at ~70%).
.
I still trying!
Thanks!
meshuggah said:
Sorry to bother you again, dioxda2
but looks like i'm realy fool !!!
I memorize your post!!!!
I can light the screen using PWR and turn off holding it! ( blanc screen only the light) Do you mean I must use the "Tradition (OLD) method" , because I already done it without success! ( The flashing stops at ~70%).
.
I still trying!
Thanks!
Click to expand...
Click to collapse
1. you are NOT FOOL
2. better follow steps to the bootloader mode,
3. Plug to PC if you see the 'usb' @ left bottom of Prophet .... good.
4. Flash PVtemp and BE PATIENT ~~~~ IT TAKES SOME MINUTES ~~~~
5. when ready, after Prophet restarts, ONLY CONTINUE THE HARDSPL..... (no touch activesync....)
TRY
dioxda2 said:
1. you are NOT FOOL
2. better follow steps to the bootloader mode,
3. Plug to PC if you see the 'usb' @ left bottom of Prophet .... good.
4. Flash PVtemp and BE PATIENT ~~~~ IT TAKES SOME MINUTES ~~~~
5. when ready, after Prophet restarts, ONLY CONTINUE THE HARDSPL..... (no touch activesync....)
TRY
Click to expand...
Click to collapse
Thanks again!
But I think it must be HW problem!
Because I've flash successfully ( 100%) the prophet using ROMUpdateUtility_NT_G4 but still can't see something on the display!
even this "USB" at the bottom of the screen!
Could be display problem???
Sorry but how to be sure that the HW is O.K.??
I'll try to put the display in another Prophet to see what happens!
But if if works , than ...... ?????
If it's not working you can always try to remove your SIM card and hold Camera button and press ON button....
Now you can see "three colors" screen and USB then you have to flash with NVID(no vendor) AKU2.2 rom .
meshuggah;1902747 said:
Thanks again!
But I think it must be HW problem!
Because I've flash successfully ( 100%) the prophet using ROMUpdateUtility_NT_G4 but still can't see something on the display!
even this "USB" at the bottom of the screen!
Could be display problem???
Sorry but how to be sure that the HW is O.K.??
I'll try to put the display in another Prophet to see what happens!
But if if works , than ...... ?????
Click to expand...
Click to collapse
Hey~~~
1. if you can see your Prophet screen on your PC,
2. HW problem.... 20% of chance to win....
2.1 OPEN your prophet,
2.2 remove you screen, take care to the screen connector, that's a bit fragile, but
just make loose the pin, the screen may be detached very easily.
2.3 power on the Prophet, and put back the screen ( no power off), 20% you can get back the screen display properly.
4. power off,
5. make the Prophet back to one piece.
PS. hope it works for you.
dioxda2 said:
Hey~~~
1. if you can see your Prophet screen on your PC,
2. HW problem.... 20% of chance to win....
2.1 OPEN your prophet,
2.2 remove you screen, take care to the screen connector, that's a bit fragile, but
just make loose the pin, the screen may be detached very easily.
2.3 power on the Prophet, and put back the screen ( no power off), 20% you can get back the screen display properly.
4. power off,
5. make the Prophet back to one piece.
PS. hope it works for you.
Click to expand...
Click to collapse
Hi again,
1. I've removed the display veeeery easily (nothing happens with the pin )
2. Found other one prophet and put the display there and it works fine : the display is hale.
3. Follow your instruction I put very carefully the display back in the working prophet : nothing new ! The screen goes white and blanc :-(
4. Go outside and smoke a cigarete to drown my anger!
Is there any chance to find the problem!?
Thanks
Related
I installed somet languanges support pack into it from PC, everything went fine, the PC screen said, install sucessful,, and the machine prompted to reset, and then,,,its dead!!!
The Lobster only now shows the virgin mobile logo,,cant even switch off...
What should do............???
Thanks a million!!!!!!!!!
Lobster is dead? it should be cooked!
Is the Lobster/monet ROM floating around somewhere ?
dead lobby
You've probably either sorted this by now or binned the phone but I thought I'd post anyway as it may help others.
You don't describe what you mean by dead but have you tried hard reset?
WITH PHONE SWITCHED OFF (in your case remove and replace the battery)
1. Press and hold soft1 and soft2 keys (i.e. menu keys).
2. Press and hold power button for around 1 to 1.5 seconds. Release power button. Keep holding both soft keys.
3. After a while, black screen should show instructions asking user to press '0' key to reset to factory default.
4. Press '0' within the timeout period (which is very brief).
5. If instructions don't appear on the screen, repeat steps 1 to 4.
You have to flash it using it's original rom (for locked device).
but if you phone is CID UNLOCKED you can flash it using ROMIUPDATE. just put the phone in bootloader mode and run the RUU Update.
sk8erfrankrox said:
I installed somet languanges support pack into it from PC, everything went fine, the PC screen said, install sucessful,, and the machine prompted to reset, and then,,,its dead!!!
The Lobster only now shows the virgin mobile logo,,cant even switch off...
What should do............???
Thanks a million!!!!!!!!!
Click to expand...
Click to collapse
ok take batty out put it back in press to menu bottons keep hold and press power botton when a sreen tells you to press 0 do so it will hard reset you lobster
dvaiyo said:
You have to flash it using it's original rom (for locked device).
but if you phone is CID UNLOCKED you can flash it using ROMIUPDATE. just put the phone in bootloader mode and run the RUU Update.
Click to expand...
Click to collapse
hi~dvaiyo,
I have find the RUU update for lobster700 long time.
can you show url to download it ?
thanks ~
There is no place to downloat it. You must import it from other device... mtty can do it..
ive got a back up what i got form Scoter Kitchen if you what it let me no these three files BDTL0_SCOTERMSFLSH50.bin BDK0_SCOTERUT.bin BDK1_SCOTERMSIPL.bin
dvaiyo said:
There is no place to downloat it. You must import it from other device... mtty can do it..
Click to expand...
Click to collapse
I think thats you right, then the question is when I want to write into with MTTY, with which soft do I draw ROM? Please share successful experience, thanks ~
MttY?its so easy?ehe
Hello folks. The friend of mine has screwed up his Lobster, and now he wants to take a dump from another one. The problem is, mtty says r2sd command is unknown... he tried to issue password command, but we don't know the peoper password.
Does anyone have the proper password for bootloader? Or better... does anyone have a rom dump? It'd be appreciated...
utak3r said:
Hello folks. The friend of mine has screwed up his Lobster, and now he wants to take a dump from another one. The problem is, mtty says r2sd command is unknown... he tried to issue password command, but we don't know the peoper password.
Does anyone have the proper password for bootloader? Or better... does anyone have a rom dump? It'd be appreciated...
Click to expand...
Click to collapse
you have to pay £20 to cid unlock his lobby go here http://www.imei-check.co.uk/lobsterunlock.php
tankoki said:
I think thats you right, then the question is when I want to write into with MTTY, with which soft do I draw ROM? Please share successful experience, thanks ~
Click to expand...
Click to collapse
Try this :
http://forum.xda-developers.com/showthread.php?p=2100727#post2100727
travis said:
You've probably either sorted this by now or binned the phone but I thought I'd post anyway as it may help others.
You don't describe what you mean by dead but have you tried hard reset?
WITH PHONE SWITCHED OFF (in your case remove and replace the battery)
1. Press and hold soft1 and soft2 keys (i.e. menu keys).
2. Press and hold power button for around 1 to 1.5 seconds. Release power button. Keep holding both soft keys.
3. After a while, black screen should show instructions asking user to press '0' key to reset to factory default.
4. Press '0' within the timeout period (which is very brief).
5. If instructions don't appear on the screen, repeat steps 1 to 4.
Click to expand...
Click to collapse
I just somewhat bricked my Lobster today after installing fonts and ce-star into my device. I was so scared I nearly crapped my pants.
I stumbled upon your detailed instructions and it saved my thing, thank you so much =]
utak3r said:
Hello folks. The friend of mine has screwed up his Lobster, and now he wants to take a dump from another one. The problem is, mtty says r2sd command is unknown... he tried to issue password command, but we don't know the peoper password.
Does anyone have the proper password for bootloader? Or better... does anyone have a rom dump? It'd be appreciated...
Click to expand...
Click to collapse
I've found this link...
ftp://koxoguest:[email protected]/sp/rom/Lobster_700_tv_os.rar
Its supposed to be the ROM for the lobster. I however cant get it to work as my lobster is stuck on a white screen during boot and cannot get into Activesync. Can anyone advise How i can get into Bootloader mode? I have tried holding Camera key but to no avail...
try taking out the battery, then heating the back of the phone for a while
I did that on my brother's phone(his Lobster "died" the same way) on a sunny day leaving it to heat up for about 30 minutes of sunshine
after that put the battery in and try booting again
OMG......
you can say it clearly
are you update the rom?
if so ,may be the word storage is broken
travis said:
You've probably either sorted this by now or binned the phone but I thought I'd post anyway as it may help others.
You don't describe what you mean by dead but have you tried hard reset?
WITH PHONE SWITCHED OFF (in your case remove and replace the battery)
1. Press and hold soft1 and soft2 keys (i.e. menu keys).
2. Press and hold power button for around 1 to 1.5 seconds. Release power button. Keep holding both soft keys.
3. After a while, black screen should show instructions asking user to press '0' key to reset to factory default.
4. Press '0' within the timeout period (which is very brief).
5. If instructions don't appear on the screen, repeat steps 1 to 4.
Click to expand...
Click to collapse
For me it's not working.....
Any Idas?
Hi
Just got a prophet and ran a wm6 installation
now I can't get past the startup screen; it freezes where it shows the OS versions. Reseting it doesn't work either. My PC cant connect to it, altough it detects it for a few seconds when I power it up.
Thanks
fonzy99 said:
Hi
Just got a prophet and ran a wm6 installation
now I can't get past the startup screen; it freezes where it shows the OS versions. Reseting it doesn't work either. My PC cant connect to it, altough it detects it for a few seconds when I power it up.
Thanks
Click to expand...
Click to collapse
OH noooooo , you broke your phone!!!!
Ah just kidding ... you haven't broken your phone! not yet
Just read this guide you will be fine :
http://forum.xda-developers.com/showthread.php?t=310452
This has been explained in the above guide but just to make you feel better about your phone try this :
Hold Camera button and press reset. keep holding the camera button till you get to a screen with 3 color (bootloader screen). then connect your phone to your computer and flash a wm5 ROM
Good luck.
OK got it !
Thanks
BTW does labatt ice still taste like it used to?
calling for help here,playing too much to flash this handset, and in my last progress to flash it...after 100% finish...nothing comes up,not even BL mode...
just black out..i guess my hp dead...right?
any solution?or i have to take to HP service centre?
however connect to the usb,the led light green/red still on...
any body help??
no1?
Try this way :
- Take out miniSD card.
- Press both softkey and remove battery then put it back again (Don't unpress two softkeys) then softreset...
- Wait 2-3 secords
If it appear HP Bootloader Screen, your device not dead. You can flash it again.
HP 6828 Dead Lock due to Flashed with Atom Rom
nhocbanme said:
Try this way :
- Take out miniSD card.
- Press both softkey and remove battery then put it back again (Don't unpress two softkeys) then softreset...
- Wait 2-3 secords
If it appear HP Bootloader Screen, your device not dead. You can flash it again.
Click to expand...
Click to collapse
nhocbanme need your very kind help,
my buddy mistakenly flashed my HP 6828 using different Rom, probably using Atom Rom and as result my HP 6828 seems heading the the end of the world.
Please advice me what should i do to recover back my pity 6828 life ?
thanking You in advanced
Eddie
nhocbanme said:
Try this way :
- Take out miniSD card.
- Press both softkey and remove battery then put it back again (Don't unpress two softkeys) then softreset...
- Wait 2-3 secords
If it appear HP Bootloader Screen, your device not dead. You can flash it again.
Click to expand...
Click to collapse
thank's.....nhocbanme
alimx said:
thank's.....nhocbanme
Click to expand...
Click to collapse
mm guys dats nt a problem u can retrieve it am aso using ATOMS bbot loader her hp rw6828
nt u need to flash 1ly d ROM>....to a Supported aii recommend u to use helloworlds ROM...
nhocbanme said:
Try this way :
- Take out miniSD card.
- Press both softkey and remove battery then put it back again (Don't unpress two softkeys) then softreset...
- Wait 2-3 secords
If it appear HP Bootloader Screen, your device not dead. You can flash it again.
Click to expand...
Click to collapse
thanks, my 6828 show the HP Bootloader screen now. but how to continue ?
no respone when I press the any key . or insert the miniSD card the do again the step ?
Oh ! yes ! insert the miniSD and do the step again.
my 6828 upgrade to WM6.1 now !!
Thank you very much, I was going crazy and I thought I had a brick but in the end without problems and is updated and I ok
forgive me for the English from google
jeswang said:
thanks, my 6828 show the HP Bootloader screen now. but how to continue ?
no respone when I press the any key . or insert the miniSD card the do again the step ?
Click to expand...
Click to collapse
All settled.Thank you guys.
6828 dead
con't boot when iput the battery red&green button lights on... help me!
In my case. I do any way it can'y start my device. My HP service center tell me it must be change mainboard. But I don't change. But I try to open it again. I found this way.
I think you will try this way as me.
- remove battery in a few minite.
- put battery back again.
- plug a battery charge. (not a cable sync)
- If green and red is on. I think it ok. If it not on, you will try first choice.
- Press both softkey ,power switch, soft reset to start bootloader at the same time. Don't press power switch at first.
I think it can be open your device on to bootloader. Flash it again.
Chanutpong said:
In my case. I do any way it can'y start my device. My HP service center tell me it must be change mainboard. But I don't change. But I try to open it again. I found this way.
I think you will try this way as me.
- remove battery in a few minite.
- put battery back again.
- plug a battery charge. (not a cable sync)
- If green and red is on. I think it ok. If it not on, you will try first choice.
- Press both softkey ,power switch, soft reset to start bootloader at the same time. Don't press power switch at first.
I think it can be open your device on to bootloader. Flash it again.
Click to expand...
Click to collapse
This solution worked for me today! my rw6815 was just like yours!
nhocbanme said:
Try this way :
- Take out miniSD card.
- Press both softkey and remove battery then put it back again (Don't unpress two softkeys) then softreset...
- Wait 2-3 secords
If it appear HP Bootloader Screen, your device not dead. You can flash it again.
Click to expand...
Click to collapse
You're Master!!!
help
my device is HP Ipaq rw6828.... i have this problems twice, but ican solve it, now i had a same problem.... now i can't resolve it....
now my device still (dead) only LED indicator when i charge it...... i use anything method, but it's not work.... except JTAG, cz i can't use this method.... please, any other way except JTAG mode????????? many big thanks.................. if u have an opinion, email me, [email protected]
help
Exclamation help
my device is HP Ipaq rw6828.... i have this problems twice, but ican solve it, now i had a same problem.... now i can't resolve it....
now my device still (dead) only LED indicator when i charge it...... i use anything method, but it's not work.... except JTAG, cz i can't use this method.... please, any other way except JTAG mode????????? many big thanks.................. if u have an opinion, email me, [email protected]
It looks bad....
when cooking a new rom, insert (by mistake) a new splash....
Result after Flash: Black Screen, no bootloader, no conection....
No leds.....
Any ideas?
humrod said:
It looks bad....
when cooking a new rom, insert (by mistake) a new splash....
Result after Flash: Black Screen, no bootloader, no conection....
No leds.....
Any ideas?
Click to expand...
Click to collapse
if still can power on,
1. force bootloader mode MANUALLY, listen, FORCE BOOTLOADER MODE MANUALLY,
ref= http://forum.xda-developers.com/showthread.php?t=353547
2. FLASH NVID,
3. FLASH MY 2a, it may flash the SPLASH into the correct address.....
Hope it helps..
Thankx for your answer. Casually, i was flashing your rom dioxda2 2A, but I make a mistake: when rebuild the nk.nkf (translate in spanish) i select the splash (92000000-Splash.nb) file instead extended rom (9b000000-Extension.nb) file. when finiseh flashing, at the firs reboot, the screen in black. in fact, the device don't respond in anyway...no power, no bootloader.
It seems very bad......
humrod said:
Thankx for your answer. Casually, i was flashing your rom dioxda2 2A, but I make a mistake: when rebuild the nk.nkf (translate in spanish) i select the splash (92000000-Splash.nb) file instead extended rom (9b000000-Extension.nb) file. when finiseh flashing, at the firs reboot, the screen in black. in fact, the device don't respond in anyway...no power, no bootloader.
It seems very bad......
Click to expand...
Click to collapse
Can it still enter the bootloader mode manually anyhow?
You mean pushing the camera button and power, and the button with the stylus?
Nope....don't do anything
I think is dead.....
humrod said:
You mean pushing the camera button and power, and the button with the stylus?
Nope....don't do anything
I think is dead.....
Click to expand...
Click to collapse
mm. If you cant go to bootloader mode. I think your Prophet is dead.
Sorry to hear it.
humrod said:
You mean pushing the camera button and power, and the button with the stylus?
Nope....don't do anything
I think is dead.....
Click to expand...
Click to collapse
I mean to press and hold the comm manager button and same time pick the reset pt for one second,
Then only release the stylus and wait for the bootloader screen...
try ~~ hope it helps ~~
humrod said:
It looks bad....
when cooking a new rom, insert (by mistake) a new splash....
Result after Flash: Black Screen, no bootloader, no conection....
No leds.....
Any ideas?
Click to expand...
Click to collapse
according to my opinion, if you experience of the matter like that on ur prophet, I think ur prophet is dead, same likes varanusvincent said...
Maybe, u can try with the others way to repair it..U can try, the dioxda2 methode...Perhaps, it can help u to get back ur prophet...I hope so...
Thanks...
Thanks for all your opinios, but it is really dead....
I make a mistake cooking the last room....
Bad times, good face.....probably going to Diamond....
I'm talking with vodafone.
See you soon
humrod said:
Thanks for all your opinios, but it is really dead....
I make a mistake cooking the last room....
Bad times, good face.....probably going to Diamond....
I'm talking with vodafone.
See you soon
Click to expand...
Click to collapse
I'm sorry to hear that.
I like the HTC Nike very much. I think i would go with that.
Try the charge trick (short the wires or something), dont know how, but some users reported that work.
I dont see why, but u can trie, nothing to loose.
Good luck.
hi pple : (
my phone just die ... i was trying to flash my rom from RTT shock star 7pOS to RUU_Huashan_Dopod_CHS_0.90.706.0_0.97.332.6_Debug.exe ...
this is not my first time flashing ... i have did wat i usually does ... i run task29 ... press vol down to get to usb ... then i flash it with the huashan rom ...
it install for a while and then it shows the white screen with green htc logo ... for 30min i dare not cancel it ... then seeing something not right i unplug the phone from my pc ... now i cant get into my phone ... and after hardreset press vol key up ... it just stuck at the same white screen with green htc logo ...
anyway i can get into the usb mode again so that i can flash back my rtt shock star????
pls HELP!!!
try flash HLSP
and new ratio
and the rom again
how do i do that when i have not usb connection? MicroSD? how does it work?
it's for u're radio install the recomended radio in rom tread.
Have you tried to remove battery.
Replace battery, Tap power on button and hold Volume down only Button?
(sorry if you have but has worked for me in past after I stupidly not paying attention and unplugging during a flash)
THANX htckev!!!!!
u r my saviour!!! i didnt noe we can do that to get into the HSPL thanx thanx : )
Thanx and992 and hessamx too for fast reply : )
did you really flash the huashan-rom on you hd2-device????
did you use your hd2 "goldcard" to do this??????? (didn't even know flashing different device rom works...)
you should know that you can't flash a rom from a completely different device
and expect it to work....
goldcards are used to flash different CID roms not different device-roms....
crazy37 said:
THANX htckev!!!!!
u r my saviour!!! i didnt noe we can do that to get into the HSPL thanx thanx : )
Thanx and992 and hessamx too for fast reply : )
Click to expand...
Click to collapse
You're welcome sounds like it worked so good news
HD2Owner said:
did you really flash the huashan-rom on you hd2-device????
did you use your hd2 "goldcard" to do this??????? (didn't even know flashing different device rom works...)
you should know that you can't flash a rom from a completely different device
and expect it to work....
goldcards are used to flash different CID roms not different device-roms....
Click to expand...
Click to collapse
nope i didnt not noe abt "goldcard" ... oh man i tot all the roms in the forum can be flash using same method ...
thank god i read this thread!
i was almost flashing a rom from this phone into my hd2 to try to improve battery life!
i saw it was t-mobile compatable, so i thought it would work...
Let this be a warning guys. Don't just flash any rom from other devices to our HD2s. They might die if you do that.
Before flashing any rom try reading the first few posts in the thread or if you're not sure of what you are about to flash, just search first and make things clear before you do anything.
Regards,
Pongskie
lufeig said:
thank god i read this thread!
to try to improve battery life!
i saw it was t-mobile compatable, so i thought it would work...
Click to expand...
Click to collapse
Try Radio ROM 2.12 increased my battery life and reception too
lmfao.... LUFEIG!!!! it was the best joke i've heard in my whole sad life, WELL DONE
i have same problem (phone stuck on boot screen) but trying the above, gets me to the four coloured bootloader but freezes with the word 'serial' at the bottom of the screen? no flashing colours - have you (or anyone) come across this before ?
@mann kumar
bootloader vers?
Ratio vers?
what rom you try to flash og what program do you use
mann kumar said:
i have same problem (phone stuck on boot screen) but trying the above, gets me to the four coloured bootloader but freezes with the word 'serial' at the bottom of the screen? no flashing colours - have you (or anyone) come across this before ?
Click to expand...
Click to collapse
Just to be sure:
Have you connected your phone to an USB socket on your computer?
It will never show USB if you haven't
Please give info on "4 colored screen" and phone type (T8585, T9193, TMOUS)