It looks bad....
when cooking a new rom, insert (by mistake) a new splash....
Result after Flash: Black Screen, no bootloader, no conection....
No leds.....
Any ideas?
humrod said:
It looks bad....
when cooking a new rom, insert (by mistake) a new splash....
Result after Flash: Black Screen, no bootloader, no conection....
No leds.....
Any ideas?
Click to expand...
Click to collapse
if still can power on,
1. force bootloader mode MANUALLY, listen, FORCE BOOTLOADER MODE MANUALLY,
ref= http://forum.xda-developers.com/showthread.php?t=353547
2. FLASH NVID,
3. FLASH MY 2a, it may flash the SPLASH into the correct address.....
Hope it helps..
Thankx for your answer. Casually, i was flashing your rom dioxda2 2A, but I make a mistake: when rebuild the nk.nkf (translate in spanish) i select the splash (92000000-Splash.nb) file instead extended rom (9b000000-Extension.nb) file. when finiseh flashing, at the firs reboot, the screen in black. in fact, the device don't respond in anyway...no power, no bootloader.
It seems very bad......
humrod said:
Thankx for your answer. Casually, i was flashing your rom dioxda2 2A, but I make a mistake: when rebuild the nk.nkf (translate in spanish) i select the splash (92000000-Splash.nb) file instead extended rom (9b000000-Extension.nb) file. when finiseh flashing, at the firs reboot, the screen in black. in fact, the device don't respond in anyway...no power, no bootloader.
It seems very bad......
Click to expand...
Click to collapse
Can it still enter the bootloader mode manually anyhow?
You mean pushing the camera button and power, and the button with the stylus?
Nope....don't do anything
I think is dead.....
humrod said:
You mean pushing the camera button and power, and the button with the stylus?
Nope....don't do anything
I think is dead.....
Click to expand...
Click to collapse
mm. If you cant go to bootloader mode. I think your Prophet is dead.
Sorry to hear it.
humrod said:
You mean pushing the camera button and power, and the button with the stylus?
Nope....don't do anything
I think is dead.....
Click to expand...
Click to collapse
I mean to press and hold the comm manager button and same time pick the reset pt for one second,
Then only release the stylus and wait for the bootloader screen...
try ~~ hope it helps ~~
humrod said:
It looks bad....
when cooking a new rom, insert (by mistake) a new splash....
Result after Flash: Black Screen, no bootloader, no conection....
No leds.....
Any ideas?
Click to expand...
Click to collapse
according to my opinion, if you experience of the matter like that on ur prophet, I think ur prophet is dead, same likes varanusvincent said...
Maybe, u can try with the others way to repair it..U can try, the dioxda2 methode...Perhaps, it can help u to get back ur prophet...I hope so...
Thanks...
Thanks for all your opinios, but it is really dead....
I make a mistake cooking the last room....
Bad times, good face.....probably going to Diamond....
I'm talking with vodafone.
See you soon
humrod said:
Thanks for all your opinios, but it is really dead....
I make a mistake cooking the last room....
Bad times, good face.....probably going to Diamond....
I'm talking with vodafone.
See you soon
Click to expand...
Click to collapse
I'm sorry to hear that.
I like the HTC Nike very much. I think i would go with that.
Try the charge trick (short the wires or something), dont know how, but some users reported that work.
I dont see why, but u can trie, nothing to loose.
Good luck.
Related
Hi all,
I've try to upgrade my 200i to WM6 and after that I get this problem.
First I try to find something looks like my problem, but most people can see the collored screen or bootloader.
I can get nothing on screen, only the light!
If I connect the device can read via Active Sync!
What to do!
I'll be gratefull for any halp!
Thank You
meshuggah said:
Hi all,
I've try to upgrade my 200i to WM6 and after that I get this problem.
First I try to find something looks like my problem, but most people can see the collored screen or bootloader.
I can get nothing on screen, only the light!
If I connect the device can read via Active Sync!
What to do!
I'll be gratefull for any halp!
Thank You
Click to expand...
Click to collapse
see my thread... in my signature
dioxda2 said:
see my thread... in my signature
Click to expand...
Click to collapse
Thank You VM for the quick answer, dioxda2!
Sorry but one more question. Because I still can't get the "three color screen" and want to feel not worry : Based only of these symptoms (I can PWR On/Off and read via Active Sync the device ) Am I kill it or not!?
.
BEst Regards
& Thanks
George
Hi dioxda2,
Just a quick thanks to your guide... My pc had crashed while i was flashing my Jamin at 95%
Thanks again!
meshuggah said:
Thank You VM for the quick answer, dioxda2!
Sorry but one more question. Because I still can't get the "three color screen" and want to feel not worry : Based only of these symptoms (I can PWR On/Off and read via Active Sync the device ) Am I kill it or not!?
.
BEst Regards
& Thanks
George
Click to expand...
Click to collapse
can't get the "three color screen" ????
read my post 1 to the link in my signature..............
dioxda2 said:
can't get the "three color screen" ????
read my post 1 to the link in my signature..............
Click to expand...
Click to collapse
Sorry to bother you again, dioxda2
but looks like i'm realy fool !!!
I memorize your post!!!!
I can light the screen using PWR and turn off holding it! ( blanc screen only the light) Do you mean I must use the "Tradition (OLD) method" , because I already done it without success! ( The flashing stops at ~70%).
.
I still trying!
Thanks!
meshuggah said:
Sorry to bother you again, dioxda2
but looks like i'm realy fool !!!
I memorize your post!!!!
I can light the screen using PWR and turn off holding it! ( blanc screen only the light) Do you mean I must use the "Tradition (OLD) method" , because I already done it without success! ( The flashing stops at ~70%).
.
I still trying!
Thanks!
Click to expand...
Click to collapse
1. you are NOT FOOL
2. better follow steps to the bootloader mode,
3. Plug to PC if you see the 'usb' @ left bottom of Prophet .... good.
4. Flash PVtemp and BE PATIENT ~~~~ IT TAKES SOME MINUTES ~~~~
5. when ready, after Prophet restarts, ONLY CONTINUE THE HARDSPL..... (no touch activesync....)
TRY
dioxda2 said:
1. you are NOT FOOL
2. better follow steps to the bootloader mode,
3. Plug to PC if you see the 'usb' @ left bottom of Prophet .... good.
4. Flash PVtemp and BE PATIENT ~~~~ IT TAKES SOME MINUTES ~~~~
5. when ready, after Prophet restarts, ONLY CONTINUE THE HARDSPL..... (no touch activesync....)
TRY
Click to expand...
Click to collapse
Thanks again!
But I think it must be HW problem!
Because I've flash successfully ( 100%) the prophet using ROMUpdateUtility_NT_G4 but still can't see something on the display!
even this "USB" at the bottom of the screen!
Could be display problem???
Sorry but how to be sure that the HW is O.K.??
I'll try to put the display in another Prophet to see what happens!
But if if works , than ...... ?????
If it's not working you can always try to remove your SIM card and hold Camera button and press ON button....
Now you can see "three colors" screen and USB then you have to flash with NVID(no vendor) AKU2.2 rom .
meshuggah;1902747 said:
Thanks again!
But I think it must be HW problem!
Because I've flash successfully ( 100%) the prophet using ROMUpdateUtility_NT_G4 but still can't see something on the display!
even this "USB" at the bottom of the screen!
Could be display problem???
Sorry but how to be sure that the HW is O.K.??
I'll try to put the display in another Prophet to see what happens!
But if if works , than ...... ?????
Click to expand...
Click to collapse
Hey~~~
1. if you can see your Prophet screen on your PC,
2. HW problem.... 20% of chance to win....
2.1 OPEN your prophet,
2.2 remove you screen, take care to the screen connector, that's a bit fragile, but
just make loose the pin, the screen may be detached very easily.
2.3 power on the Prophet, and put back the screen ( no power off), 20% you can get back the screen display properly.
4. power off,
5. make the Prophet back to one piece.
PS. hope it works for you.
dioxda2 said:
Hey~~~
1. if you can see your Prophet screen on your PC,
2. HW problem.... 20% of chance to win....
2.1 OPEN your prophet,
2.2 remove you screen, take care to the screen connector, that's a bit fragile, but
just make loose the pin, the screen may be detached very easily.
2.3 power on the Prophet, and put back the screen ( no power off), 20% you can get back the screen display properly.
4. power off,
5. make the Prophet back to one piece.
PS. hope it works for you.
Click to expand...
Click to collapse
Hi again,
1. I've removed the display veeeery easily (nothing happens with the pin )
2. Found other one prophet and put the display there and it works fine : the display is hale.
3. Follow your instruction I put very carefully the display back in the working prophet : nothing new ! The screen goes white and blanc :-(
4. Go outside and smoke a cigarete to drown my anger!
Is there any chance to find the problem!?
Thanks
Hi, I was trying to flash my ROM with SSPL and a cooked ROM and now my HD2 is bricked. When I turn it on, the white HTC screen comes up and nothing more happens (except the back gets warm). I'm assuming that the little "void" thing below the battery area means that any warranty is void or something.
Can anyone help? Nothing I can do to it will make anything happen. Thanks all!
SSPL? Aren't you supposed to use the HSPL?
jamesmbaldwin said:
Hi, I was trying to flash my ROM with SSPL and a cooked ROM and now my HD2 is bricked. When I turn it on, the white HTC screen comes up and nothing more happens (except the back gets warm). I'm assuming that the little "void" thing below the battery area means that any warranty is void or something.
Can anyone help? Nothing I can do to it will make anything happen. Thanks all!
Click to expand...
Click to collapse
As far as I know the "void" thing below the battery is correctly in place. If it was missing - then your warranty would be void.
I would put your phone into bootloader and flash a stock rom.
If you have a european phone check this http://forum.xda-developers.com/showthread.php?t=609477
If you have USA phone check here http://forum.xda-developers.com/showthread.php?t=653614
Your phone is not bricked, you should be able to reflash back to a stock rom. To flash a custom rom you should use Hard-SPL, if you do this make sure you pay close attention to the directions, because a long time ago I bricked my wizard because I didn't pay attention to details
http://forum.xda-developers.com/showthread.php?t=606713
And if you have T-Mobile USA 1024 version:
http://forum.xda-developers.com/showthread.php?p=6004691
Fixed my Aussie T9193
Hi, thanks all for the responses, I've gotten it working! I didn't know about getting the phone into bootloader mode FIRST, then doing the installations. BIG help, thanks to the collective wisdom!!
JMB
i flashed one rom,,no prob,,when i tried to flash the "ozrom"...it wont even power up..or charge,,,,im screwed
lennox03 said:
i flashed one rom,,no prob,,when i tried to flash the "ozrom"...it wont even power up..or charge,,,,im screwed
Click to expand...
Click to collapse
post in the ozrom thread then
lennox03 said:
i flashed one rom,,no prob,,when i tried to flash the "ozrom"...it wont even power up..or charge,,,,im screwed
Click to expand...
Click to collapse
did you check your radio and did you use hspl ?
djchubbs said:
post in the ozrom thread then
Click to expand...
Click to collapse
Wrong radio!
I bricked my phone after using "Task 29"... PLEASE HELP!
I just used "Task 29", my phone is stuck on the home screen and will not do anything else. I keep holding down the volume buttons and inserting a USB cord to see if it will sync to my computer so I can upload another ROM, but as soon as the multi colored screen comes up, it quickly changes to a white screen telling me to either press the vol button up for a reset or another key to escape it. If I press up it goes right back to the boot up screen and does the same if I press any other button. Is there anyone who could help me.... PLEASEEEE!!!!
starr073199 said:
I just used "Task 29", my phone is stuck on the home screen and will not do anything else. I keep holding down the volume buttons and inserting a USB cord to see if it will sync to my computer so I can upload another ROM, but as soon as the multi colored screen comes up, it quickly changes to a white screen telling me to either press the vol button up for a reset or another key to escape it. If I press up it goes right back to the boot up screen and does the same if I press any other button. Is there anyone who could help me.... PLEASEEEE!!!!
Click to expand...
Click to collapse
Just hold the volume down button and then press the end call button instead of both the volume buttons...
garavd said:
just hold the volume down button and then press the end call button instead of both the volume buttons...
Click to expand...
Click to collapse
omg!!! I love you!!!!! Thanks sooooo much!!!!
possibly bricked hd2? any help!!??
i just flashed a radio last night. the flashed finished completely. the phone looked like it was going to restart but never came back on. and wont turn on no matter what i do. did i brick my phone? i did have hspl
us hd2 with tmobile
the radio was 2.05.50.11
any help would be helpfull
articulatekevin said:
i just flashed a radio last night. the flashed finished completely. the phone looked like it was going to restart but never came back on. and wont turn on no matter what i do. did i brick my phone? i did have hspl
us hd2 with tmobile
the radio was 2.05.50.11
any help would be helpfull
Click to expand...
Click to collapse
try turning on holding volume down push power and then plug to pc wait for usb to appear on phone screen and do task29 and than reflash your favorite rom again..... good luck!!!!!!!
hi pple : (
my phone just die ... i was trying to flash my rom from RTT shock star 7pOS to RUU_Huashan_Dopod_CHS_0.90.706.0_0.97.332.6_Debug.exe ...
this is not my first time flashing ... i have did wat i usually does ... i run task29 ... press vol down to get to usb ... then i flash it with the huashan rom ...
it install for a while and then it shows the white screen with green htc logo ... for 30min i dare not cancel it ... then seeing something not right i unplug the phone from my pc ... now i cant get into my phone ... and after hardreset press vol key up ... it just stuck at the same white screen with green htc logo ...
anyway i can get into the usb mode again so that i can flash back my rtt shock star????
pls HELP!!!
try flash HLSP
and new ratio
and the rom again
how do i do that when i have not usb connection? MicroSD? how does it work?
it's for u're radio install the recomended radio in rom tread.
Have you tried to remove battery.
Replace battery, Tap power on button and hold Volume down only Button?
(sorry if you have but has worked for me in past after I stupidly not paying attention and unplugging during a flash)
THANX htckev!!!!!
u r my saviour!!! i didnt noe we can do that to get into the HSPL thanx thanx : )
Thanx and992 and hessamx too for fast reply : )
did you really flash the huashan-rom on you hd2-device????
did you use your hd2 "goldcard" to do this??????? (didn't even know flashing different device rom works...)
you should know that you can't flash a rom from a completely different device
and expect it to work....
goldcards are used to flash different CID roms not different device-roms....
crazy37 said:
THANX htckev!!!!!
u r my saviour!!! i didnt noe we can do that to get into the HSPL thanx thanx : )
Thanx and992 and hessamx too for fast reply : )
Click to expand...
Click to collapse
You're welcome sounds like it worked so good news
HD2Owner said:
did you really flash the huashan-rom on you hd2-device????
did you use your hd2 "goldcard" to do this??????? (didn't even know flashing different device rom works...)
you should know that you can't flash a rom from a completely different device
and expect it to work....
goldcards are used to flash different CID roms not different device-roms....
Click to expand...
Click to collapse
nope i didnt not noe abt "goldcard" ... oh man i tot all the roms in the forum can be flash using same method ...
thank god i read this thread!
i was almost flashing a rom from this phone into my hd2 to try to improve battery life!
i saw it was t-mobile compatable, so i thought it would work...
Let this be a warning guys. Don't just flash any rom from other devices to our HD2s. They might die if you do that.
Before flashing any rom try reading the first few posts in the thread or if you're not sure of what you are about to flash, just search first and make things clear before you do anything.
Regards,
Pongskie
lufeig said:
thank god i read this thread!
to try to improve battery life!
i saw it was t-mobile compatable, so i thought it would work...
Click to expand...
Click to collapse
Try Radio ROM 2.12 increased my battery life and reception too
lmfao.... LUFEIG!!!! it was the best joke i've heard in my whole sad life, WELL DONE
i have same problem (phone stuck on boot screen) but trying the above, gets me to the four coloured bootloader but freezes with the word 'serial' at the bottom of the screen? no flashing colours - have you (or anyone) come across this before ?
@mann kumar
bootloader vers?
Ratio vers?
what rom you try to flash og what program do you use
mann kumar said:
i have same problem (phone stuck on boot screen) but trying the above, gets me to the four coloured bootloader but freezes with the word 'serial' at the bottom of the screen? no flashing colours - have you (or anyone) come across this before ?
Click to expand...
Click to collapse
Just to be sure:
Have you connected your phone to an USB socket on your computer?
It will never show USB if you haven't
Please give info on "4 colored screen" and phone type (T8585, T9193, TMOUS)
Hello everyone.
My HD2 hangs with white screen (htc central and written in red lettering below left) and remains so.
I tried them all (task29 - soft reset - restore the original ROM from SD) but nothing worked.
Anyone have any ideas?
Thanks in advance!
Don´t know, what´s going wrong. If you have done task29, you can go into bootloader mode and connect your HD2 to your PC. If you read USB, you can flash a ROM over PC. I prefer an energy rom, which is running fast and is offered in many languages. If you have done task29, i think the drivers of the sd card weren´t loaded, so you can´t flash a rom from there.
Bootloader Mode: Remove your accu, then mount it in it´s place. Press the Vol Down button, hold it, press short the right Button under the screen (power) and leave it, hold the Vol Down button, until a three colored screen appears. This is the bootloader. There stands Serial. If you connect it tothe PC, there must stand USB. Now you can flash a rom of your choice by double click on the RUU.exe file.
PS: Please use other headlines for a thread, more expressive.
[OFFTOPIC]
Neo XL said:
[......]
PS: Please use other headlines for a thread, more expressive.
Click to expand...
Click to collapse
How much more expressive in the title can one get? put Grrrrr behind the title?
I think you mean explain yourself a bit better in the title.
[/OFFTOPIC]
As to the problem:
We need more specifics:
Can you enter bootloader(not eplicitly mentioned).
Does your computer see your phone?
which version (H)SPL is presented on the bootloader screen?
Which ROM do you want to flash?
Is CustomRUU running?
Is CustomRUU hanging / crashing / finishing? [if so where, which %-age?]
Have you removed SIM and microSD cards?
Please post the sequence of steps and their "exit state [ie successfull / not successfull]"
When do you notice the [problem?
Now I installed the original SPL 1.42.0000 and the original ROM from SD, but the device does not start. remains with white screen and red lettering at the bottom left.
I tried 4 or 5 different ROMs, I tried several soluioni.
I think the only way is to restore the BIOS in some way, but I do not know how.
throw it in da wheelie bin
Wilco said:
[OFFTOPIC]
How much more expressive in the title can one get? put Grrrrr behind the title?
I think you mean explain yourself a bit better in the title.
[/OFFTOPIC]
Click to expand...
Click to collapse
I forgot the smiley behind my sentence
i cant boot my hd2 pass the white screen with the green HTC letters, i tried hard reset but that doesnt work.
thx for your help
more info, last thing you did, what you were trying to do.
i just did that vol up + down and end call thing. im a complete noob when it comes to phones.
i didnt do anything to my hd2 (no custom rom)
it was working fine until when i tried to turn it on
i dunno if this is relevant but when i charge it the orange light is always on (at the top) even if im not charging
iethanx3 said:
i dunno if this is relevant but when i charge it the orange light is always on (at the top) even if im not charging
Click to expand...
Click to collapse
everything is relevant, and yes, that would point to a battery / charge circuit fault.
Bent battery connectors? (look carefully at all 6)
they look fine ill try to upload a video thx
heres a video hope it helps
youtubelink/watch?v=jK-T_NqNChc
im not allowed to post urls
You do need to hard reset, and (no disrespect) I suspect you're doing it wrong. Turn off the phone completely, then hold down both volume buttons and just press the power button briefly (don't hold the power button, but continue holding both volume buttons).
You'll then be given on-screen instructions that I can't remember as it's been so long since I've done it.
thx for your reply but it still doesnt work it says restore complete... vol up to reboot or something. After i reboot it. im still stuck on white screen and green HTC words
If it doesn't even boot after a hard reset then I think it needs replacing mate. It sounds irreparably damaged.
Is it new? Have you had it for a while and this just started happening? If so, what was the last thing you installed or flashed?
iethanx3 said:
heres a video hope it helps
youtubelink/watch?v=jK-T_NqNChc
im not allowed to post urls
Click to expand...
Click to collapse
did you flash a custom rom? and if yes, did you flash a matching radio? cos if you dont flash the right radio, and the cooked rom is based on a tmous core, (unlocks the 576 ram) the phone wont boot.
enter bootloader, flash a radio with 50 in the version, and it will boot.
i only had it for 6 months
how do u install then radio thingy ill give it a shot plz link me
i think it is a custom rom because my HD2 is taiwanese and i got some person to change it to english for me (custom rom?)
When i go on boot loader it comes up with
PB81100 HX-BC
SPL-1.4.2. HSPL XE
0x05
cotullaHSPL 0x40
i dunno if i got a custom rom installed.. i think it is because i bought it overseas (taiwan) and i got someone to install a english rom on it
and how do u install a radio rom because my i cant seem to get windows mobile device center to work. i found
Leo_RADIO_15.28.50.07U_2.05.50.11 **(from TMOUS 2.01) on xda forums will it do?
thanx
flash from bootloader, no need for windows mobile to be running.
that radio is a test radio, and isn't a high enough version for what you need(if the radio is indeed the problem)
look in the radio thread and go for somethin like 2.10.50.x
thx for your reply... but unfortunately i dunno how to do that bootloader thingy i think im just gonna send it back to taiwan and get someone to fix it for me. because i tried in sydney it cost 200 dollars just for them to check wats wrong
iethanx3 said:
thx for your reply... but unfortunately i dunno how to do that bootloader thingy
Click to expand...
Click to collapse
yea its pretty difficult,
phone off
press hold and keep holding voldown
tap and release power
when bootloader appears, connect usb
wait 20 seconds
run your flash on the pc
i can see how you would struggle with such a difficult process
haha problem is it doesnt recongise my device
hey you have to change you spl from 1.42 to 2.08 using hspl4 or hspl2.then only you can flash custom rom or roll back to stock rom .hope this would help.