error CID unlocking G4 - G4

Hi, im trying to CID unlock my G4 with HARD SPL, but i end up with error:
"REXX error SPL_VERSION has no value.
In the REXX script named
At line number: 129"
what to do? both ipl and spl are 2.17.0001 same than before.
it removed my theme though

Problem solved after failed few times
I had wm5 with scandics, I happened to screw it up kinda but found old vodafone wm5.
installed that, did HARD-SPL and it worked like it should, installed new ROM and works fine

Related

G4 RRU problem

Hi all,
I've tried to flash my phone with RRU (underground edition crossbow.exe), update said everything ok, it started to upload new rom into phone, but at 96% it stopped with error 302. After passing the recovery process it boots just into bootloader. Tried to run again, the same.
Screen shows:
IPL 2.17.0001
SPL 2.17.0001
ActiveSync v. 4.2
Phone was unlocked (was showing Vodafone boot logo, but I've used o2 simcard without problem)
Obviously don't know if phone have CID locked or not.
Thanks for any advices

Help, Pls, My MDA always stuck on the three-colored bootloader screen

Help, Pls, My MDA always stuck on the three-colored bootloader screen
IPL 2.21.0001
SPL 2.21
What do I have done so far:
1. I used HardSPL (My telephone worked normally then )
2. I pay 20 Paunds for IMEI-CHECK. It after Unlocking restarted and went always In three-colored bootloader screen
IPL 2.21.0001
SPL 2.21
3. Try CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe. The procedure passes through but I next again continue on the three-colored bootloader screen
4. Try Wizard_Love_2.26.10.2_WWE_Novii_CF2. (The procedure does not goes. It allows mistake ERROR [300] : INVALID UPDATE TOOL)
5. Try RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe -ERROR [294] : INVALID VENDER ID
6. Try MDA_software_update_226102_22610105_022511.exe - ERROR [294] : INVALID VENDER ID
7. Try RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2-G4.exe - ERROR [300] : INVALID UPDATE TOOL)
You help out please for I worry really. I bought the telephone and possibly burned him down just.
iivan said:
Help, Pls, My MDA always stuck on the three-colored bootloader screen
IPL 2.21.0001
SPL 2.21
What do I have done so far:
1. I used HardSPL (My telephone worked normally then )
2. I pay 20 Paunds for IMEI-CHECK. It after Unlocking restarted and went always In three-colored bootloader screen
IPL 2.21.0001
SPL 2.21
3. Try CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe. The procedure passes through but I next again continue on the three-colored bootloader screen
4. Try Wizard_Love_2.26.10.2_WWE_Novii_CF2. (The procedure does not goes. It allows mistake ERROR [300] : INVALID UPDATE TOOL)
5. Try RUU_Prodigy_2210206_22102109_021911_TMO_UK_WWE_Ship.exe -ERROR [294] : INVALID VENDER ID
6. Try MDA_software_update_226102_22610105_022511.exe - ERROR [294] : INVALID VENDER ID
7. Try RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2-G4.exe - ERROR [300] : INVALID UPDATE TOOL)
You help out please for I worry really. I bought the telephone and possibly burned him down just.
Click to expand...
Click to collapse
You have a G4 IPL and a G3 SPL !
What that does is letting you start in bootloader, but not letting you write anything because the G3 chip the SPL was written for is quite different from the G4 chip it has been put on.
As far as I have been told, it's a sure brick.
This happened after you tried to unlock with imei-check's tool?
Yes for sorrow. Is got after i use M3000v4Unlock.exe from IMEI-CHECK
I had before that Windows but my SIM is lock to Tmobile.
I fell after unlocking in this situation.
IPL 2.21.0001
SPL 2.21
You help out please, if it is possible !
iivan said:
Yes for sorrow. Is got after i use M3000v4Unlock.exe from IMEI-CHECK
I had before that Windows but my SIM is lock to Tmobile.
I fell after unlocking in this situation.
IPL 2.21.0001
SPL 2.21
You help out please, if it is possible !
Click to expand...
Click to collapse
It's impossible to re-flash a phone in this state.
The G3 SPL has no way to write to the G4 chip as far as I know.
same problem
I have the same problem
any news about it
the-equinoxe said:
It's impossible to re-flash a phone in this state.
The G3 SPL has no way to write to the G4 chip as far as I know.
Click to expand...
Click to collapse
But G4 has way to G3
I have a G3, a day i missed when i flash the SPL for G4
Now my G3 is IPL 1.01 / SPL 2.20.0001
anyone helpme please
Tx
I give more information I hope you are able to help.
Cmd>set 32 2
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
+ SD Controller init
- SD Controller init
+StorageInit
CMD55 failed
GetDeviceCID: Error - InitDecoder
g_cKeyCardSecurityLevel = FF
HTCE

Rexx error while unlocking G4

I'm trying to unlock my phone with hard_SPL-G4.exe but an rexx error appears "SPL_VERSION has no value"
Has someone a clue how to fix it?
Tks
IPL /SPL 2.22.0001
GSM 10.16.11
OS 2.22.17.2
same here, any solution anyone?.
yep. just started learning this stuff, and hard also told me this REXX error too
IPL 2.21.0001
spl 2.21.0001
gsm 2.7.10
os 2.21.4.1
seems like you have to run the hard_SPL-G4 tool 21 times, weird but it works for me
try this update ur rom with a official g4 rom then try to cid unlock
any solution for this error ?

Help with HardSPL please

Hey, i recently purchased a HTC Prophet (branded SPV M600 from orange) from a friend.
Since then i managed to get a WM6.1 rom on (shadow 2 i think)
Anyway, back when i did this, i found it very hard.
My prophet is not hardspl'd and i've having trouble changing the rom.
In my effort to change it, i 'bricked' it, however recovered it using one of those WM5 roms.
So my details:
IPL 2.20.0001
SPL 2.10.0001
GSM 02.07.20
Currently i'm running a WM5 rom, however i have managed a WM6.1 rom before, but cannot seem to do it again, whenever i get it installed it just boots to the bootloader.
When trying to HardSPL it just gives generic cannot connect errors.
I've used Prophet Tools aswell as manual guides but to no avail.
Am i doing something wrong?
And btw i'm using WinXP
Cheers, James
Hey, turns out i wasn't following instructions properly - probably due to my tiredness!
I wasn't pressing the camera button on white screen... DOH!
Problem now solved and running 'Vista Clean'
Cheers,
James

NEED HELP

HELLO ,I have an I-mate k-jam ,I did the cid ulock,http://www.imei-check.co.uk, the unlock went well and restore the rom tnt 6.0.After I decided to install a new rom Slimv3.1(diamond ) and the wizard after charging correctely the rom started up with the screen with the colour bar:
IPL 2.21.0001
SPL2.21
got stuck on it
I try to to do hardSPL AND softSPl ,doesn't reconise the wizard(no device conneted)
I try to restore original Rom and wizard love :doesnt work ERROR 300
If someone have any idea help me.
thanks
IPL 2.21.0001
SPL2.21
Is it SPL 2.21 or 2.21.0001?
If its 2.21,than I'm afraid you got mixed Bootloaders (IPL/SPL) of G3 and G4,
IPL 2.21.0001 being G4 where as, SPL 2.21 being G3,in this situation nothing can be done to revive it.
How did you get this ?
I try this rom slimv 3.1

Categories

Resources