Related
I'm currently looking for a BT GPS which one do you advise I cant seem to make up my mind although I'm close to buying a TomTom BT one
What have you and why does it work well ?????
I can recommend either a TomTom BT GPS (ebay for around £80-90) or..... I have a wired version of the TomTom which is cheaper and fits my arkon car xda2 pwered and speakered cradle, and really does work well, and it hides really well into the corner of the windsceen with minimal wires, in fact i have managed to bury mine in the dash.....plus the wired are cheaper too, about £60 on ebay.....any help??
In fact having thought about this, I have a powered xda2 car kit, with GPS and hands free talking for under £100, which aint bad going. Just make sure you get TomTom as the nav software, it really is the best.
Therer are many thread on this, also look at www.pocketgps.co.uk
My advise: buy a cheap BT GPS on ebay. Bought my D-Connex DC-230 (rebadged Holux GR-230) for approx 104 euros (in fact: a BT GPS for the price of a wired one)
When buying, keep in midn you need more than a gps to navigate:
Software
Carkit or Cradle and powerlead (Y-cable)
Dashmount or Windscreen-suction mount
Also verify you wotn have any issue with a heat-resistant windscreen. These type of windscreens have a metal layer that prevents any radio signals coming thru, except for about two spots, mostly next to the mirror behind which you will have to put your gps.
bryson said:
I can recommend either a TomTom BT GPS (ebay for around £80-90) or..... I have a wired version of the TomTom which is cheaper and fits my arkon car xda2 pwered and speakered cradle, and really does work well, and it hides really well into the corner of the windsceen with minimal wires, in fact i have managed to bury mine in the dash.....plus the wired are cheaper too, about £60 on ebay.....any help??
In fact having thought about this, I have a powered xda2 car kit, with GPS and hands free talking for under £100, which aint bad going. Just make sure you get TomTom as the nav software, it really is the best.
Click to expand...
Click to collapse
I'll have that if it fits a MDA III pm me and I'll send my telephone number and personal email
I dont sell any of these, I am just a Joe Soap with an XDA2 whom made the plunge!
This link looks interetsing for the sirf GPS with the Arkon kit all in one. I aint seen this one before......However, NO Idea if the MDAIII has the same bottom connector as the XDA2 I guess this is relevant whatever cradle you may jump for.....maybe the seller could advise, or the forum?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=69929&item=5138639767&rd=1
This is the kit I have, and i then bought the tomtom GPS wired with a RJ11 cable that plugs into this cradle and gets its power from the cradle also, to avoid the recharging issues from the BT versions.
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=3730&item=5138957143&rd=1&ssPageName=WDVW
Any the wiser now?
Tomtom Navigator Bluetooth
Had the Bluetooth running very well with the XDA 2, had occasisional issues where I would have to switch Bluetooth off and then on in order to establish a connection between the GPS reciever and the phone.
I am having no luck with the XDA 2s and the Bluetooth reciever - or rather some luck but most of the time the phone tells me that the Bluetooth device4 has no useable services, upgrading to the lates GPS driver seems to drop the option of using the tomtom BT reciever and I end up having to use the BT outbound serial port 6 in order to get a connection, this will then work fine, if I leave both the XDA2s and the BT reciever running. Switch either one off and I have to re-create all of the BT connections from scratch. Anyone got any suggestions, I love the WiFi in the 2s but Sat Nav is far far more important to me.
GPS BT
Guys,
I have a Leadtek 9537
http://www.leadtek.com/gps/gps_9537_1.html
wich is the same has the FAC BT-30, but way cheaper (obviously, Leadtek makes them)
works find with Tomtom, precise enough
you just need to get the car charger, wich doesn t need to be the Leadtek one.
hope that helps
Ciao
Guzz
Lyon
France
NavMan won't work with WM2003 SE
You may be interested to know that the Navman Smart ST 2 GPS software won't work with WM 2003 SE. The unit bonds, but apparently the software won't work with the VGA capable display driver, even though we are stuck with 1/4 VGA on our XDA's.
After all the work put in by people in this forum to get the XDA II working with a serial port, I finally had the XDA II Navman 4400 working very well, spent 6 weeks cruising round Europe with hardly a drama, apart from some very out of date maps (Cruising through paddocks instead of new motorways). Using external aerial I had no problems getting signals in Paris, and the unit picked up within seconds of leaving a tunnel.
Version 3 is available in Oz, but even this needs a patch apparently. Navman working on it, possibly February 05 I hear.
Re: NavMan won't work with WM2003 SE
Camstech said:
You may be interested to know that the Navman Smart ST 2 GPS software won't work with WM 2003 SE. The unit bonds, but apparently the software won't work with the VGA capable display driver, even though we are stuck with 1/4 VGA on our XDA's.
After all the work put in by people in this forum to get the XDA II working with a serial port, I finally had the XDA II Navman 4400 working very well, spent 6 weeks cruising round Europe with hardly a drama, apart from some very out of date maps (Cruising through paddocks instead of new motorways). Using external aerial I had no problems getting signals in Paris, and the unit picked up within seconds of leaving a tunnel.
Version 3 is available in Oz, but even this needs a patch apparently. Navman working on it, possibly February 05 I hear.
Click to expand...
Click to collapse
Actually after recently installing the Merged 2.02.t1WWE & 2.06.00WWE ROMs, Navman is working better than ever before! I'm using Navman 4410 SmartST Version 2 and the great thing about WM2003SE is that I don't have to check the GPS box everytime I want to use GPS!
Ive been using the Globalsat BT 359 w/ my wizard and it's great so far.
But, Im wondering if Im wasting money.
Ive got the Data Unlimited Plan w/ Telenav GPS service coming in at around $50 monthly.
Ive seen some ppl using the Navizon P2P Wireless Positioning with the Local option for free.
So my question for all the GPS users is,"what's the best setup?" And/or the cheapest?
I got an iBlue BT GPS receiver off eBay for $80 including the car vent mount for my Tmo MDA. The software can be pricey if you can't find a free copy, but once you have that, you don't have to pay anything monthly. You don't even need to have data on your account.
Anybody know what would be the best BT GPS receiver for being wired into my car for power??
I basically want to leave the receiver in the car at all times and be able to connect to it when needed and not have to worry about it being charged and such.
Thanx!
Try then Rikaline GPS-6033 which can be found on eBay for 50-70. I had never heard of this brand or even know how reputable it is, but their reciever has an auto function, which, when attached to the car via the included charger, and set on "auto" mode, it will turn on and off automatically with your car so you never have to worry about battery.
I also wanted this feature so I took a chance on the reciever and have been quite happy with is so far.
It also comes with magenteic mounts so you can keep the reciever secure in your car.
Running with Holux236 and TomTom 6 with my Wizard. Works like a charm. No problems.
/d
Thameth said:
Anybody know what would be the best BT GPS receiver for being wired into my car for power??
I basically want to leave the receiver in the car at all times and be able to connect to it when needed and not have to worry about it being charged and such.
Thanx!
Click to expand...
Click to collapse
Any of them will do just get a hardwire kit from Best Buy or something and tap into your fuse box or a hot wire in the steering column, I have mine hook up to my wiper fuse so it'll be on only when the car is on.
garmin gps10
I have the Garmin GPS 10. It is bluetooth and works with my laptop as well. Not real fond of the included software, wish I had TomTom.
http://www.garmin.com/products/gps10/
It seems to slow my processor to a crawl, so I currently use it in my car with an old HP ipaq 5450 and no longer have it installed on my Cingular 8125.
-Go0se
"God bless Bob Stoops and God bless America."
dodgy said:
Running with Holux236 and TomTom 6 with my Wizard. Works like a charm. No problems.
/d
Click to expand...
Click to collapse
I'm using the Holux GPSlim 236 as well. I think i read that it can be hard wired and has the logic built in. I recommend it. No problems with mine whatsoever.
I picked it up on ebay for about $75 and it included the asskorn vent mount that I use on my desk as a stand...it works perfect.
GPSSlim 236
it is simply flawless.
GPS
I couldn't get my GPS Garmin 10 to work with my MDA (TMO) but after the upgrade to 2.26 I was able to turn on the GPS control icon in settings/system. You need to edit the registry (I got a copy of Kilmist) and in HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings
delete the "redirect" key (I have no keys in GPS Settings).
This turns on the GPS icon.
I do find it a bit of a pain to connect, but that's because the MDA doesn't have the "Connect?" choice for devices. My older IPAQ 6315 and my cell phone allow you pick a device, then say connect. I find a lot of devices are tougher to connect via B/T than they should be..I don't know how to get around it. Why they couldn't just have a "Connect This Device?" option is beyond me.
I have had 2 Holux236 units that the bluetooth just stoped working on, The light wouldn't even come on. I am thinking about trying an i-blue.
im using the i-blue 737 and very happy with it.
i had some problems with the wm5 gps multi-plexer .. and trying to use telenav + windows live at the same time. so i havent been doing that lately... now that i have a fresh install with a molski rom (my old tmobile rom install was a bit buggy for some reason.... i think it was the chinese ebay sd card i had in there before i got this sandisk ultra II mobile when i did my molski reload)
but , so far so good .. the 737 seems to be very nice
cheap..32 channel (supposedly)...good power...it seems that the 737 (MTK chipset) or any SIRF III chipset module is the way to go.... with the SIRF III being the more standard choice.
i like the telenav..its ok.. its cool that there is no real local install... i do hate the way that the UI seems to 'take over' since i cant use my software kbd if i want to put something in quickly without sliding it open to landscape... other than that its just fine.. but the monthly rate seems a bit annoying.
also they did not offer a t-mobile version..so i signed up saying i had cingular.. downloaded the wm5 install they had for cingular.... installed that client.. and went to the telenav website and changed my profile to say i had a blackberry on t-mobile...works fine.
i think im going to be giving tomtom and iguidance a shot... when i was doing some research they seemed to be the 2 leaders...telenav is ok...but again..$10/mo gets old.
so far i have tried tomtom and iguidance and i like iguidance v3.0 the best. I have a HoluxGPSlim SiRF III bluetooth GPS receiver and its the best combo i can find so far. The only problem is that it can be buggy at times. The gps is fine, but the iguidance is kind of buggy. If you don't enter a destination right after opening the program and then try to press Menu, it pulls up a bar at the bottom for "file, tools, view, etc" and the map freezes. BUT, that is the only grip i have with iGuidance. When i hit a traffic jam i just close out iGuidance and pull up Map4PDA and connect my gps and zoom out to see where it picks back up and then jump off the freeway and take city streets till I'm back in the green and then jump back on.( Map4PDA isn't voice promted, but it does have up-to-date traffic and that is the perfect combo for me.) Wish there was a program that did both and didn't have any bugs. (Bugs have been the same since I owned a stock 8125 and gone through EVERY ROM on this site.) But so far, the new 3.3 V2 rom is the best working, and fastest to boot!
GPS
I use tomtom 6 navigator software with north america maps on a 2gb and Pharos gps reciever w/ the bluetooth adaptor. tomtom seems to be the best navi progi for me
The Holux Gpslim 236 has a proper on/off switch which allows you to hide the unit in your car somewhere and leave it powered from the car battery or wire it in via the ignition sytem. Most other GPS units have a "soft" on/off button and will need to be switched on manually, apart from the rickaline one which senses the car being started and stopped. Tomtom6 works flawlessly on my xda mini-s and cleans up after being unloaded (no memory leaks).
Regards
Riptos
Is there any freeware for Telenav on the Tilt
than paying $10 per month
like we did on the Mobi Tv & Xm Radio
SPECTEC GPS anyone?
Has enyone tried using the SPECTEC BlueTooth GPS RECEIVER 813 (Mini SD ). Seems to be a pretty good GPS device.
I am interested in buying it. thought I will ask of any experiences.
Upinder
US TMO G3 with
ROM Version 10.1.0.811 WWE
Radio Version 2.25.11
Protocol Versio 4.1.13.12
SINGH Mobile 6 ROM
bt gps
I just got a globalsat bt gps recr for Christmas and it has been great. mine is g33 for around $50 w/ a vent or sticky mount from buygpsnow.com
It has worked pretty well with Delorme Street Atlas plus 2008.
What are the Top 3 Best Bluetooth GPS receivers for Hermes?
I need to buy something but don't know which one so i can use tomtom
Thanks
http://cgi.ebay.co.uk/Qstarz-BT-Q81...=39:2|66:2|65:1|240:1318&_trksid=p3286.c0.m14
I bought a Qstarz receiver, not exactly the linked one though. It has been working great with my Hermes for more than a year now. I am afraid that the only one I used, so can't tell top 3. I guess you may buy a Tomtom branded receiver.
Holux GPSlim 240. works like a charm
I use G-Sat BT359, and it works nicely. (Also battery recharging plug is same usb-mini power)
http://www.globalsat.com.tw/eng/product_detail_00000076.htm
Pretty descent gps unit Navibe GB 735 w/sirfstarIII
I use the navibe GB 735 bluetooth unit. It also has the same usb connection as my cell and since i don't have a car charger for the hermes and the gps does; I now have a car charger for me hermes too . I do have some issues when i'm in downtown chicago. Too many skyscrapers makes keeping a signal going and data transmitting to my software spotty; but, it still works well enough. The biggest pain was initial set up. If anyone cares; just go to external gps in settings --> connections and set program com port to none, then hardware com port to 5, then check the let windows automatically set gps in the last tab. In bluetooth settings, after you add the device, set an outgoing com port for it on com 5 by clicking the com tab and then clicking the device. And in your gps software, set the com port to 5. This should be it for the rest of your days----until you switch roms . I tried various other ways of getting a quick and reliable signal and this is the only one that worked.
Cheers.
Hi, I´ve a broken TyTn and now I have to use jTag, for fix it again.
But, by the way I know it is not possible to flash GPS at a TyTn at the usually way.
But when I using jTag I get deeper into the system settings.
Would it be possible to flash GPS or something else for pimp my TyTn?
You can't flash GPS to your phone.
The Hermes got a GPS receiver on board but there is no power connection, neither an antanna soldered to the mainboard.
There were enough threads about that.
greetz
playdo
You can however purchase a GPS antenna (bluetooth only) and use a GPS navigation program like Tomtom on your device. I use Tomtom and it works quite well.
Just remember though, and this is up for debate, the more channels you have on the receiver, the better the reception and quicker the lock. I find it more accurate too. At least this is my experience...
Cheers...
I have a Holux M100 GPS unit i bought a few years back which works fine on my windows mobile, but i can seem to get any software to work with it on the Hero i have it paired but it always says "paired but not connected" please can someone help me out with this and point me in the right direction.
Not really an answer as much as a question. Why not just use the built in GPS receiver in the Hero?
peterc10 said:
Not really an answer as much as a question. Why not just use the built in GPS receiver in the Hero?
Click to expand...
Click to collapse
Well, with a Bluetooth GPS receiver, you can mount it in a better position to get a stronger signal.
I have this issue too with my Holux GPSlim 240. It works on my laptop and Nokia N95, but not with my Hero.
I think there isn't a Bluetooth GPS out there that is Android supported/compatible.
OK, but in reality the position of the Hero has never been a real problem to me when it comes to GPS (at least not one a nearby BT receiver could solve). It works fine in my car - mounted on a Brodit car mount close to eye-line. It works well in my pocket while walking (with the screen off and using the headphones to listen to guidance) And it works well at home, as long as I am near a window
Is that normal, or am I just lucky?
Same with me. Work perfectly as it should same as described by peterc10.
Why not just buy a car mount for the hero? you dont even need the "official" one you can get one with a grip that tightens and loosens and slot the phone in there. Then stick it to the windscreen as you would normally.
sidon100uk said:
I have a Holux M100 GPS unit i bought a few years back which works fine on my windows mobile, but i can seem to get any software to work with it on the Hero i have it paired but it always says "paired but not connected" please can someone help me out with this and point me in the right direction.
Click to expand...
Click to collapse
The Android 1.5 Bluetooth stack in the Hero is incomplete and thus almost certainly won't support external GPS modules. Also, given it has built in GPS, it is more likely than not that none of the GPS software currently available would support an external GPS unit anyway.
Regards,
Dave
I find this hard to believe, as my Holux 1000B simply creates a Bluetooth Serial port. And my GPS software such as TrekBuddy.net simply reads and pares the info which is dumped to the serial port.
I'll go home and try it.
I believe that the Bluetooth Serial Port Profile (SPP) was not supported in Android via public APIs (which applications need to actually use it) until Android 2.0.
Regards,
Dave
Once it is paired try tapping on it again to connect it.
The first time I paired my headset it said "Paired but not connected" and tapping one more time got it for me.