Related
I installed a dialpad skin without removing the previous one (i forgot!)
To make matters worse, I then installed a third one over the top (again forgetting to remove the first two) to fix things
I now have a severely messed up dialpad.
What is the easiest way to remove all the dialpad skinning and get back to default blank settings, without hard reset?
Pyrofer said:
I installed a dialpad skin without removing the previous one (i forgot!)
To make matters worse, I then installed a third one over the top (again forgetting to remove the first two) to fix things
I now have a severely messed up dialpad.
What is the easiest way to remove all the dialpad skinning and get back to default blank settings, without hard reset?
Click to expand...
Click to collapse
have you tried removing the last skin from the remove prog. and then soft- resetting...
these are spb-dialpad skins that you used
I installed each one in turn again, then correctly un-installed it.
That left me with a blank white dialpad.
I have now installed a working one and its fine! yay.
Back to the original problem before I caused all this.
i have a nice iPhone dialpad, but its not VGA. Does anybody know how to modify the theme to make it VGA compatible?
Im willing to do the work/put in the time but I have no idea where to start.
Are there simply images that must be re-sized? Is there an editable file with x/y values for the buttons etc?
Any ideas?
Pyrofer said:
I installed each one in turn again, then correctly un-installed it.
That left me with a blank white dialpad.
I have now installed a working one and its fine! yay.
Back to the original problem before I caused all this.
i have a nice iPhone dialpad, but its not VGA. Does anybody know how to modify the theme to make it VGA compatible?
Im willing to do the work/put in the time but I have no idea where to start.
Are there simply images that must be re-sized? Is there an editable file with x/y values for the buttons etc?
Any ideas?
Click to expand...
Click to collapse
the iphone dialpad you have is mostlikely for the eten dialer...in which case there is not much you can do...how-ever if you would like to build a dialer just uncompress the spb dialer cab...these are the file with the dimensions that you need to make
Ive not had any luck uncompressing cabs. How do I do that with free software?
A link or two would help But I know, "search the forum for yourself"....
Pyrofer said:
Ive not had any luck uncompressing cabs. How do I do that with free software?
A link or two would help But I know, "search the forum for yourself"....
Click to expand...
Click to collapse
I use IZArc. It's free and can handle most archive formats including cabs. I use it for everything except zip, which is native to Win XP.
http://www.izarc.org/download/IZArc_Setup.exe
Pyrofer said:
Ive not had any luck uncompressing cabs. How do I do that with free software?
A link or two would help But I know, "search the forum for yourself"....
Click to expand...
Click to collapse
use this theme it is VGA and it solves the problem it is WM6 VGA dialpad theme for WM5 devices. Hoop that it helps try it !!! after installing retsart your Athena or Ameo and you will see the WM6 dialpad VGA theme.
direct download if note helped then go below to the site and read the first post there and downlaod theMobile 6 Crossbow Dialpad for WM5 VGA devices
http://mahmood1.com/Documents/wm6_vga_dialpad.rar
http://mahmood1.com/themes.aspx
Thanks for those, what I actualy need is to know how to edit an existing Non-VGA dialpad to be vga.
Is it just matter of re-sizing the images in the cab? I get the feeling that some hex editing of .dll or .exe files may be needed.
Pyrofer said:
Thanks for those, what I actualy need is to know how to edit an existing Non-VGA dialpad to be vga.
Is it just matter of re-sizing the images in the cab? I get the feeling that some hex editing of .dll or .exe files may be needed.
Click to expand...
Click to collapse
you need cabmanager to do the job i have PM'd you the dowload link download and all the instructions are included there !!! you can extract all exe files or any files from CAB and you can make CAB files !!! it is the best prograam in managing CAB files !!
Mahmood said:
you need cabmanager to do the job i have PM'd you the dowload link download and all the instructions are included there !!! you can extract all exe files or any files from CAB and you can make CAB files !!! it is the best prograam in managing CAB files !!
Click to expand...
Click to collapse
Hi Mahmood. Any chance you can share that info with me too? Cheers.
mackaby007 said:
Hi Mahmood. Any chance you can share that info with me too? Cheers.
Click to expand...
Click to collapse
Sure Why NOt i have Pm'd you the download URL and the files are there !! enjoy
Mahmood said:
Sure Why NOt i have Pm'd you the download URL and the files are there !! enjoy
Click to expand...
Click to collapse
Thanks again Mahmood, you da man.
Yes indeed.
Thanks very much.
Mahmood said:
Sure Why NOt i have Pm'd you the download URL and the files are there !! enjoy
Click to expand...
Click to collapse
Hi Mahmood !
Another PM is possible to make my VGA dialpad skin with an existing QVGA one ?
Thanks
This has probably been answered elsewhere, but I can't find what I need.
Is there a way to change the whole design of the Cube? If so what do I need to do, and where do I put the files on my Prophet?
l3v5y said:
This has probably been answered elsewhere, but I can't find what I need.
Is there a way to change the whole design of the Cube? If so what do I need to do, and where do I put the files on my Prophet?
Click to expand...
Click to collapse
just go here and read, is all explained how to do ;-)
http://forum.xda-developers.com/showthread.php?t=325424
The problem with that is that my reg settings are directing the Cube to the ExtROM not the \Windows dir. I've found a reg file that sorts that (attached), and a more complete explanation thanks Schaeferreiner.
http://forum.xda-developers.com/showpost.php?p=1598899&postcount=94
Thanks for the response anyway.
Hi,
sorry for a new post but the search function was not so helpfull.
I need some help in following things:
- removing GoogleMaps
I removed the GoogleMaps Folders in OEM. Also I edited a .provxml file which contained an entry for the tf3d program. When I flash the new rom I get an error message which tells me that couldn't be installed. Did I forget anything to delete or to edit?
- removing .netcf 2.5 and installing .netcf3.5 instead
I hope a kind person can give me some tips.
Thanks
About GoogleMap, take a look at ConfigAP inside OEM, and edit the Config_AP.txt
For .NET you only need to delete the NetCF package inside SYS and put the new one 3.5 version.
Cheers
jcespi2005 said:
About GoogleMap, take a look at ConfigAP inside OEM, and edit the Config_AP.txt
For .NET you only need to delete the NetCF package inside SYS and put the new one 3.5 version.
Cheers
Click to expand...
Click to collapse
Wow...very fast answer. Thanks for the tip.
Hi jcespi2005,
can you give me another tip?
I want to remove the Customer Feedback. I found this thread http://forum.xda-developers.com/showthread.php?t=429157 , it says following
[2] Remove ceipui.exe modules in SYS\Shell
Reg key to remove cpanel applet or blank orphaned icon
[HKEY_LOCAL_MACHINE\ControlPanel\Customer Feedback]
"Redirect"=""
"Hide"=dword:1
I removed the ceipui.exe folder and edited the two regfiles. But everytime I plug in the usb cable I get a error message which says that ceipui.exe could not be found? Have I forgotten something to edit?
Can you give me a short description how I can add a other programs, e.g. total commander? I have the package-creator 2.7 tool.
Thanks
Akuma said:
Hi jcespi2005,
can you give me another tip?
I want to remove the Customer Feedback. I found this thread http://forum.xda-developers.com/showthread.php?t=429157 , it says following
[2] Remove ceipui.exe modules in SYS\Shell
Reg key to remove cpanel applet or blank orphaned icon
[HKEY_LOCAL_MACHINE\ControlPanel\Customer Feedback]
"Redirect"=""
"Hide"=dword:1
I removed the ceipui.exe folder and edited the two regfiles. But everytime I plug in the usb cable I get a error message which says that ceipui.exe could not be found? Have I forgotten something to edit?
Can you give me a short description how I can add a other programs, e.g. total commander? I have the package-creator 2.7 tool.
Thanks
Click to expand...
Click to collapse
About the ceipui.exe, the erros you see are related to mxip_notify.vol. This file contains the notifications queue. Try to subst the default one with the attached one (without ceipui.exe notification)...
For adding programs, search here for OEM packages with lot of apps ready to use
Cheers
Cheers
Thanks for your help jcespi2005, I will give it a try.
Thanks jcespi2005, but Akuma, u missed the post #5
hang.tuah said:
Thanks jcespi2005, but Akuma, u missed the post #5
Click to expand...
Click to collapse
Yes, I missed it. Cooking is a quiet complicated stuff. Beginners must read a lot of threads around the hole forum. So I'm happy about guys like you and jcespi2005 who are helping beginners a lot.
Thx
hang.tuah said:
Thanks jcespi2005, but Akuma, u missed the post #5
Click to expand...
Click to collapse
jejeje so many missed posts all around
jcespi2005 said:
About the ceipui.exe, the erros you see are related to mxip_notify.vol. This file contains the notifications queue. Try to subst the default one with the attached one (without ceipui.exe notification)...
For adding programs, search here for OEM packages with lot of apps ready to use
Cheers
Cheers
Click to expand...
Click to collapse
Hi jcespi2005 and hang.tuah,
can you give me a hand again?
I searched for the OEM packages but didn't found the right stuff. Can you give me tip or a link to a tutorial whick explains me how to make my own OEM package, e.g. for Batti_v2.4
Sorry, I don't find the right threads.
Akuma said:
Hi jcespi2005 and hang.tuah,
can you give me a hand again?
I searched for the OEM packages but didn't found the right stuff. Can you give me tip or a link to a tutorial whick explains me how to make my own OEM package, e.g. for Batti_v2.4
Sorry, I don't find the right threads.
Click to expand...
Click to collapse
To make OEM packages you can convert CAB files to OEM, there are many suggestions on the Wiki for doings this. One example is the cab2oem progam from the Kaiser world here: http://forum.xda-developers.com/showthread.php?t=422942
Or
You can just download the OEM package if someone else has uploaded it.
Ta
Dave
DaveShaw said:
To make OEM packages you can convert CAB files to OEM, there are many suggestions on the Wiki for doings this. One example is the cab2oem progam from the Kaiser world here: http://forum.xda-developers.com/showthread.php?t=422942
Or
You can just download the OEM package if someone else has uploaded it.
Ta
Dave
Click to expand...
Click to collapse
Thanks Dave. I give it a try.
DaveShaw said:
To make OEM packages you can convert CAB files to OEM, there are many suggestions on the Wiki for doings this. One example is the cab2oem progam from the Kaiser world here: http://forum.xda-developers.com/showthread.php?t=422942
Or
You can just download the OEM package if someone else has uploaded it.
Ta
Dave
Click to expand...
Click to collapse
Can anyone upload Cab2Oem again. I can't download it. Thx
It can be found in the "tools" folder of Raphael Kitchen - probably on your HD right now.
Hey guys,
sorry if this is a noobish question, but I tried to update my swype using clockwork with one of the color trail ones from one of the posts in the Themes section. Unfortunately, after rebooting, I now get an error saying:
"The application Swype(process com.swype.android.inputmethod) has stopped unexpectedly. Please try again. dumpstate_app_201009281042_com_swype_android_input method.log has been saved. Use *#9900# to copy out log."
I downloaded the swype.apk file and installed it, but that didn't help.
Can anyone help me uninstall and reinstall swype?
Can one of the mods delete this thread, I'm not sure how. Thanks!
Nevermind, solved this by taking the swype files from the system/lib folder and system/app folder in the vibrant dump and using root explorer to paste them back in my phone
rbtady said:
Hey guys,
sorry if this is a noobish question, but I tried to update my swype using clockwork with one of the color trail ones from one of the posts in the Themes section. Unfortunately, after rebooting, I now get an error saying:
"The application Swype(process com.swype.android.inputmethod) has stopped unexpectedly. Please try again. dumpstate_app_201009281042_com_swype_android_input method.log has been saved. Use *#9900# to copy out log."
I downloaded the swype.apk file and installed it, but that didn't help.
Can anyone help me uninstall and reinstall swype?
Can one of the mods delete this thread, I'm not sure how. Thanks!
Nevermind, solved this by taking the swype files from the system/lib folder and system/app folder in the vibrant dump and using root explorer to paste them back in my phone
Click to expand...
Click to collapse
Do you need MetaMorph for those color trails, or is that just for the custom keyboards? Maybe MM is just for themes...I forget offhand.
I want to edit my waiting cursor,using Resco,I tried several times to
copy shellres.192.dll from HD2\Windows\ to stoeage card,but all my
efforts was in vain, system deniede me.Can anyone help me? By the way,
I can use Resco to copy another shellres.192.dll to overwrite the
original one! Thanks!
you could try ROM Extractor, maybe it'll work
p107r0 said:
you could try ROM Extractor, maybe it'll work
Click to expand...
Click to collapse
Thank you a lot! Using ROMExtractor, I have another "shellres.192.dll" on my
storage card!
But another question:My purpose is to use ResourceHacker to chang BMP for
waiting cursor which is hidden in "shellres.192.dll". But when I Extract
"shellres.192.dll" from \windows\ to \Storage Card\, then I just copy it back to
windows,(didn't do anything else),I find the "Setting" panel has been
changed,the three sub-panels: Personal,system,connections, missed!
I don't know why. Please help me,if can. Thanks!!!
rather than just copy it back into windows, make the file into a cab that installs it to windows. just copying files over rom files doesn't usually work.
samsamuel said:
rather than just copy it back into windows, make the file into a cab that installs it to windows. just copying files over rom files doesn't usually work.
Click to expand...
Click to collapse
Thanks for the instruction! I use WinCE CAB Manager3.0 to make a cab named VagrantMan Wait Cursor.cab.
It shows the same result: the Wait Cursor works well, but I find the "Setting" panel has been
changed,the three sub-panels: Personal,system,connections, missed!
Are you kind enough to check my cab? Is there anything wrong?