I installed a dialpad skin without removing the previous one (i forgot!)
To make matters worse, I then installed a third one over the top (again forgetting to remove the first two) to fix things
I now have a severely messed up dialpad.
What is the easiest way to remove all the dialpad skinning and get back to default blank settings, without hard reset?
Pyrofer said:
I installed a dialpad skin without removing the previous one (i forgot!)
To make matters worse, I then installed a third one over the top (again forgetting to remove the first two) to fix things
I now have a severely messed up dialpad.
What is the easiest way to remove all the dialpad skinning and get back to default blank settings, without hard reset?
Click to expand...
Click to collapse
have you tried removing the last skin from the remove prog. and then soft- resetting...
these are spb-dialpad skins that you used
I installed each one in turn again, then correctly un-installed it.
That left me with a blank white dialpad.
I have now installed a working one and its fine! yay.
Back to the original problem before I caused all this.
i have a nice iPhone dialpad, but its not VGA. Does anybody know how to modify the theme to make it VGA compatible?
Im willing to do the work/put in the time but I have no idea where to start.
Are there simply images that must be re-sized? Is there an editable file with x/y values for the buttons etc?
Any ideas?
Pyrofer said:
I installed each one in turn again, then correctly un-installed it.
That left me with a blank white dialpad.
I have now installed a working one and its fine! yay.
Back to the original problem before I caused all this.
i have a nice iPhone dialpad, but its not VGA. Does anybody know how to modify the theme to make it VGA compatible?
Im willing to do the work/put in the time but I have no idea where to start.
Are there simply images that must be re-sized? Is there an editable file with x/y values for the buttons etc?
Any ideas?
Click to expand...
Click to collapse
the iphone dialpad you have is mostlikely for the eten dialer...in which case there is not much you can do...how-ever if you would like to build a dialer just uncompress the spb dialer cab...these are the file with the dimensions that you need to make
Ive not had any luck uncompressing cabs. How do I do that with free software?
A link or two would help But I know, "search the forum for yourself"....
Pyrofer said:
Ive not had any luck uncompressing cabs. How do I do that with free software?
A link or two would help But I know, "search the forum for yourself"....
Click to expand...
Click to collapse
I use IZArc. It's free and can handle most archive formats including cabs. I use it for everything except zip, which is native to Win XP.
http://www.izarc.org/download/IZArc_Setup.exe
Pyrofer said:
Ive not had any luck uncompressing cabs. How do I do that with free software?
A link or two would help But I know, "search the forum for yourself"....
Click to expand...
Click to collapse
use this theme it is VGA and it solves the problem it is WM6 VGA dialpad theme for WM5 devices. Hoop that it helps try it !!! after installing retsart your Athena or Ameo and you will see the WM6 dialpad VGA theme.
direct download if note helped then go below to the site and read the first post there and downlaod theMobile 6 Crossbow Dialpad for WM5 VGA devices
http://mahmood1.com/Documents/wm6_vga_dialpad.rar
http://mahmood1.com/themes.aspx
Thanks for those, what I actualy need is to know how to edit an existing Non-VGA dialpad to be vga.
Is it just matter of re-sizing the images in the cab? I get the feeling that some hex editing of .dll or .exe files may be needed.
Pyrofer said:
Thanks for those, what I actualy need is to know how to edit an existing Non-VGA dialpad to be vga.
Is it just matter of re-sizing the images in the cab? I get the feeling that some hex editing of .dll or .exe files may be needed.
Click to expand...
Click to collapse
you need cabmanager to do the job i have PM'd you the dowload link download and all the instructions are included there !!! you can extract all exe files or any files from CAB and you can make CAB files !!! it is the best prograam in managing CAB files !!
Mahmood said:
you need cabmanager to do the job i have PM'd you the dowload link download and all the instructions are included there !!! you can extract all exe files or any files from CAB and you can make CAB files !!! it is the best prograam in managing CAB files !!
Click to expand...
Click to collapse
Hi Mahmood. Any chance you can share that info with me too? Cheers.
mackaby007 said:
Hi Mahmood. Any chance you can share that info with me too? Cheers.
Click to expand...
Click to collapse
Sure Why NOt i have Pm'd you the download URL and the files are there !! enjoy
Mahmood said:
Sure Why NOt i have Pm'd you the download URL and the files are there !! enjoy
Click to expand...
Click to collapse
Thanks again Mahmood, you da man.
Yes indeed.
Thanks very much.
Mahmood said:
Sure Why NOt i have Pm'd you the download URL and the files are there !! enjoy
Click to expand...
Click to collapse
Hi Mahmood !
Another PM is possible to make my VGA dialpad skin with an existing QVGA one ?
Thanks
Related
Below is the .CAB file for installing the Today BT Plugin that will never disappear and even resizable font as other Today plugins :!:
Follow the instructions below for correct installation that shall gaurantee a stable Today BT icon: -
1. Uncheck the "Profile" in Today icons.
2. Delete the respective key "Profile" found in \HKLM\SOFTWARE\Microsoft\Today\Items\
3. Install the attached CAB file and reset your device.
After reset you shall find the BT headset icon stable and even selectable with your D-pad
"......" - deleted...implicit words
BTW check your cab. it is not working.
buzz
HTC plugin
buzz_lightyear said:
it's still the same HTC plugin... just renamed and changed the registry to be Selectable...
BTW check your cab. it is not working.
buzz
Click to expand...
Click to collapse
Thanks buzz.
Of course it is HTC plugin file. Except that if you checked it you'de read a different version than the one available on those 2.06 ROM :!:
I did not rename nor re-invented, all I have done is extracted the same file from 2.20.07CHE ROM which I have tested and found it stable and "selectable" too.
I do not underestimate you, except that I wanted to share this file with those who complained about the same issue on this forum, pal :wink:
...sorry man...
it' ok now...
however, check the cab...
buzz
Good work Cyber-mate,
Works fine here.
Just a thought
Isn't it better to rename this file as \Windows\Profile.DLL instead of \Windows\Today_BT_Earphone.DLL
Doesn't this reduce the work of deleting the respective key "Profile" found in HKLM\SOFTWARE\Microsoft\Today\Items\
Since we alredy know that profile.dll is faulty and does not have any more hidden function.
Renaming the file
Shikra said:
Good work Cyber-mate,
Works fine here.
Just a thought
Isn't it better to rename this file as \Windows\Profile.DLL instead of .....
Click to expand...
Click to collapse
I could've done that but didn't want to override the copyrights of HTC :wink:
After all for you as an advanced user, it is ez. But for those then it might be hard to do :!:
:idea: You could extract the file from the cab and do it urself..
RE
Hi Cyber-mate,
If I'll to install the cab file in the EXTROm and after a hard reset do I still need to
1. Uncheck the "Profile" in Today icons.
2. Delete the respective key "Profile" found in \HKLM\SOFTWARE\Microsoft\Today\Items\
??? :roll:
Thanks
Re: Renaming the file
Cyber-mate said:
I could've done that but didn't want to override the copyrights of HTC.
Click to expand...
Click to collapse
Yes, They have sure copyright to fumble BT icon :wink:
Rename the attached file...
Alright... rename the attached and copy it to your windows, then soft reset :idea:
Cyber-Mate,
This was what I meant when I said rename file as Profile.dll.
Works is all yours. Just changed the name thats all
Instructions:
Just need to run this cab and restart.
It replaces "\Windows\Profile.DLL" as "\Windows\Profile_Original.DLL",
and then copies Today_BT_Earphone.DLL", file as "\Windows\Profile.DLL",
good work..
Shikra said:
Cyber-Mate,
This was what I meant when I said rename file as Profile.dll.
Works is all yours. ....
Click to expand...
Click to collapse
Well done. We are XDA Developers family members dude :wink:
i have the latest kitchen and i opened it........ there isnt any noticable proggie there that builds a rom (at least that i can see).........can someone help me out with instructions or a link to some good intructions?
thx all
dennis
which kitchen are you using?
Dc_striker said:
which kitchen are you using?
Click to expand...
Click to collapse
dcd V2.3.1
I'm a noob and it took me awhile to figure it out too. I created a new empty folder on the desktop. Then using Winzip or Winrar (or whatever zip program you use) select all files and EXTRACT them into the empty new folder you created on your desktop. Then run the .bat file you see (buildos or something like that). There will also be a bunch of additional folders inside your new folder...don't worry about those. The program pretty much runs itself after that. You can pick some options...then click the small green arrow in the menu bar and some stuff happens in the background....finally it will produce your ROM and you follow the onscreen intructions from there.
Kinda on the same note ... can other aps be added to the rom? ie ... say Handbase, SPB Pocket plus ... Obviously I'd love to build a rom that would if restore my phone like I like it after a hard reset ... not sure if you can do this ... but if so How? I'm currently using a "cooked" rom from the same
kitchen ... would just like to cook it some more
Fuzzy
edited typo
FuzzyWuzHe said:
Kinda on the same note ... can other aps be added to the rom? ie ... say Handbase, SPB Pocket plus ... Obviously I'd love to build a rom that would if restore my phone like I like it after a hard reset ... not sure if you can do this ... but if so How? I'm currently using a "cooked" rom from the same
kitchen ... would just like to cook it some more
Fuzzy
edited typo
Click to expand...
Click to collapse
yea your can add stuff like that get the cab file and make it a oem and when u make it a oem go to the kitchen folder and u will see a folder name oem drop it in there run the buildbat and u will see it in there if u have any questions just ask me here
okay ... just one silly question ... how do I make these apps an OEM? ... do I just put the cab in a folder in the OEM folder? Thanks ... in advance
Fuzzyu
FuzzyWuzHe said:
okay ... just one silly question ... how do I make these apps an OEM? ... do I just put the cab in a folder in the OEM folder? Thanks ... in advance
Fuzzyu
Click to expand...
Click to collapse
no you have to get a package creator (oem maker)
search on this site u will find a link for dl
thx for all the replies...... i opened the buildnb.bat file but an error message pops up cannot find rom update utility...... what do i do now?
the reason i want to start cooking is that i want to get my voice dial back........also i want the quick launch buttons bac on my today screen ( the one with comm mannager screen lighting power meter and the rotate screen option.......can i do this stuff with the kitchen?
edit:::: i figured that prob out and i made a new rom although im not sure what half of the stuff in the options menu are.... like i said all i want is voicedialing and the quicklaunch menu back
dieseldennis said:
thx for all the replies...... i opened the buildnb.bat file but an error message pops up cannot find rom update utility...... what do i do now?
the reason i want to start cooking is that i want to get my voice dial back........also i want the quick launch buttons bac on my today screen ( the one with comm mannager screen lighting power meter and the rotate screen option.......can i do this stuff with the kitchen?
edit:::: i figured that prob out and i made a new rom although im not sure what half of the stuff in the options menu are.... like i said all i want is voicedialing and the quicklaunch menu back
Click to expand...
Click to collapse
i will help you out but there another why to cust your phone try using UC
UC? ill do a search on it. well i think all i really need to do is instal some new today screen .cab files and ill be golden. do i have a file manager somwhere and not know it? or do i need a new one? if i need one any suggestions for a good one?
thx
dieseldennis said:
UC? ill do a search on it. well i think all i really need to do is instal some new today screen .cab files and ill be golden. do i have a file manager somwhere and not know it? or do i need a new one? if i need one any suggestions for a good one?
thx
Click to expand...
Click to collapse
you can get total commander its free google it
Dc_striker said:
you can get total commander its free google it
Click to expand...
Click to collapse
i just dl'd it hopfully itll work thanks
ill let you know what happens
edit::: no go i used total commander to instal the plugin and the xml file keeps getting opened up by internet explorer and all the other files dont open either........ack! why am i the only one having this prob........ive searched and i cant find any related posts.
please help
dieseldennis said:
i just dl'd it hopfully itll work thanks
ill let you know what happens
edit::: no go i used total commander to instal the plugin and the xml file keeps getting opened up by internet explorer and all the other files dont open either........ack! why am i the only one having this prob........ive searched and i cant find any related posts.
please help
Click to expand...
Click to collapse
wait what are you trying to do
umm i want to install a new today screen and get some new today screen options like power meter and comm manager quick launch.
i have a strange feeling im being retarded and the answeris right on front of my face and i cant see it.......ack!
edit: if at all possible id like to get my oem voice dial back ...... it isnt in dcds new rom release 2.3.1
dieseldennis said:
umm i want to install a new today screen and get some new today screen options like power meter and comm manager quick launch.
i have a strange feeling im being retarded and the answeris right on front of my face and i cant see it.......ack!
edit: if at all possible id like to get my oem voice dial back ...... it isnt in dcds new rom release 2.3.1
Click to expand...
Click to collapse
idk you can just goole all those if you have cabs you want to make into oems google or search on the site for package creator
Dc_striker said:
idk you can just goole all those if you have cabs you want to make into oems google or search on the site for package creator
Click to expand...
Click to collapse
what do i do with oem files?
really what i want to do is learn how to install cab files into my phone
all these cab files come with
sheesh i figured it out ........ my problem is i was extracting the .rar or .zip file before i loaded it into my phone! sh*t.
thx guys
dieseldennis said:
thx for all the replies...... i opened the buildnb.bat file but an error message pops up cannot find rom update utility...... what do i do now?
the reason i want to start cooking is that i want to get my voice dial back........also i want the quick launch buttons bac on my today screen ( the one with comm mannager screen lighting power meter and the rotate screen option.......can i do this stuff with the kitchen?
edit:::: i figured that prob out and i made a new rom although im not sure what half of the stuff in the options menu are.... like i said all i want is voicedialing and the quicklaunch menu back
Click to expand...
Click to collapse
Hi I'm having the same problem. I tried running the .bat file and it comes up with the same error. You wrote that you fixed it, but didn't say how. In the future it would probably be a little more helpful if you wrote how you fixed it. Thank you very much guys.
Somehow when I did the new DCD kitchen 3.0 it did not include the MMS software for Verizon.. Does anyone have a .cab for this?
I did do a search for mms but there is so many mentions of it that I was not able to simply find a link to a cab for it..
Any help would be awesome!!
RevSand said:
Somehow when I did the new DCD kitchen 3.0 it did not include the MMS software for Verizon.. Does anyone have a .cab for this?
I did do a search for mms but there is so many mentions of it that I was not able to simply find a link to a cab for it..
Any help would be awesome!!
Click to expand...
Click to collapse
The new 3.0.1 Kitchen has the OEM's for MMS. You can build a new based on that kitchen or copy the MMS OEM's from that kitchen into 3.0.0
[email protected]$ said:
The new 3.0.1 Kitchen has the OEM's for MMS. You can build a new based on that kitchen or copy the MMS OEM's from that kitchen into 3.0.0
Click to expand...
Click to collapse
Is there a cab or something for it?? I just got the phone all set up again after this latest update (spb suite, other software, etc) and would like to avoid losing all those settings again doing the new rom just for that...
RevSand said:
Is there a cab or something for it?? I just got the phone all set up again after this latest update (spb suite, other software, etc) and would like to avoid losing all those settings again doing the new rom just for that...
Click to expand...
Click to collapse
I believe there is. I have seen a CAB for it but I don't know if it will work. ( I havent tried it).
Because in the Kitchen there is two versions of MMS one for Verizon and the other seems to be universal.
Check this link out this might help you.
http://forum.ppcgeeks.com/showthread.php?t=19122
is there a way to install an OEM and not have to redo the entire ROM? might be a newb question but I dunno...
RevSand said:
is there a way to install an OEM and not have to redo the entire ROM? might be a newb question but I dunno...
Click to expand...
Click to collapse
There are ways to turn a CAB file into an OEM package, so I would assume that someone might be able to figure out how to turn an OEM package into a CAB file, or at least figure out where to manually place the files. I've never looked at the OEMs though, so I can't offer anything except hope.
drew826 said:
There are ways to turn a CAB file into an OEM package, so I would assume that someone might be able to figure out how to turn an OEM package into a CAB file, or at least figure out where to manually place the files. I've never looked at the OEMs though, so I can't offer anything except hope.
Click to expand...
Click to collapse
Thanks! Thats KINDA what I am hoping also...
Are there ANY mms softwares that can be downloaded??
RevSand said:
Are there ANY mms softwares that can be downloaded??
Click to expand...
Click to collapse
check out this link
http://forum.xda-developers.com/showthread.php?t=363570#post1863862
or this one if you want to substitute MMS for another app
http://forum.ppcgeeks.com/showthread.php?t=19122
if you have Sprint, I believe MMS wont work for you because they disabled it.
If you'd like, I can convert my VZW MMS OEM into a cab file for you.
gcincotta said:
If you'd like, I can convert my VZW MMS OEM into a cab file for you.
Click to expand...
Click to collapse
That would kick total ass... Thanks!!
bump to see if anyone has any ideas on this..
As of right now no cab file has worked for MMS. It has always needed to be cooked in to the ROM.
I cant remember where I got this and I don't know if it works..... TRY it at your OWN risk.... The Filename is VerizonMMS.cab.....
http://www.fileshex.com/download.php?file=578419da9fbafc89513f60a202283923
Hope it works.....
azclown said:
I cant remember where I got this and I don't know if it works..... TRY it at your OWN risk.... The Filename is VerizonMMS.cab.....
http://www.fileshex.com/download.php?file=578419da9fbafc89513f60a202283923
Hope it works.....
Click to expand...
Click to collapse
Hmm I am a risk taker... Trying it now..
Thanks!
RevSand said:
Hmm I am a risk taker... Trying it now..
Thanks!
Click to expand...
Click to collapse
Well Revsand, did it work?
Software installs and sets up right but it cannot seem to get or send any pix...
Is there some configuration that needs to be done to make it work??
RevSand said:
Software installs and sets up right but it cannot seem to get or send any pix...
Is there some configuration that needs to be done to make it work??
Click to expand...
Click to collapse
Any update?
Navigate to [HKEY_LOCAL_MACHINE\Software\Arcsoft in the registry and make sure all your values match up with the values in this file. View attachment 76830
There is ONE key you MUST change and that's in:
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
Change "X-VzW-MDN"="0000000000" to "X-VzW-MDN"="yourtendigitnumber"
Other than that, just cross reference the rest of the values and make sure they're right.
Or rename this file to settings.reg and import it to you phones registry....
ever since wm6.1 came my cedit shows funny fonts if i open any xml file on my mobile to edit may be its due to fonts ,cedit uses something like single pitched fonts as it says so i have 2 options left
1st > ask you people for xml editor other than cedit.
or 2nd > may switch back to font type which wm5 and gullum VII versions used (that is if fonts hav't changed ever since then cedit won't give any problem.)
I'm not entirely sure about the functionality of cedit, but I have written a very basic xml viewer/editor. http://forum.xda-developers.com/showthread.php?p=2112634
(Edit) Sorry, I should have read the original posting better. The following is a windows version and therefore offtopic, but maybe anyway helpful:
Some time ago I have written a nice litte XML Editor, maybe it helps someone. It can even show the XML as treeview. If you want to distribute it anywhere else, please send me a note.
Sounds much better than mine!
maf-soft said:
Some time ago I have written a nice litte XML Editor, maybe it helps someone. It can even show the XML as treeview. If you want to distribute it anywhere else, please send me a note.
Click to expand...
Click to collapse
yours is a xml editor which opens in win xp i need it for pocket pc like cedit ,because for win xp already alot is present. thank you .
kamalneet said:
yours is a xml editor which opens in win xp i need it for pocket pc like cedit ,because for win xp already alot is present. thank you .
Click to expand...
Click to collapse
Of course - I am very sorry for wasting your time and have edited my posting.
well i found that about 2mb of fonts have been removed from nvid so , clean editions only have tahoma and tahomabd ,therefore i copied those fonts extracted from nvid and cedit works now ,actually you need courier new or cmbr font probably here below are all fonts.
http://rapidshare.com/files/118541151/fonts.rar.html
and cedit
http://www.logicalsky.com/Product_CEdit.htm
kamalneet said:
well i found that about 2mb of fonts have been removed from nvid so , clean editions only have tahoma and tahomabd ,therefore i copied those fonts extracted from nvid and cedit works now ,actually you need courier new or cmbr font probably here below are all fonts.
http://rapidshare.com/files/118541151/fonts.rar.html
and cedit
http://www.logicalsky.com/Product_CEdit.htm
Click to expand...
Click to collapse
Nice! Glad you found the root of your problems! How big are the Courier fonts?
l3v5y said:
Nice! Glad you found the root of your problems! How big are the Courier fonts?
Click to expand...
Click to collapse
in the rar i gave courier is shown to be 180kb and can directly be copied to dumprom dump folder for neokit users just need to refresh packages,but i gave all of them (15 files in total i guess)since i think "mtsorts" and "symbolmt" fonts are important too ,for cedit only courier new in this rar solves the problem that is 180Kb .
ps. cour.ttf might be hidden so you need to disable do not show hidden files to see it.
kamalneet said:
in the rar i gave courier is shown to be 180kb and can directly be copied to dumprom dump folder for neokit users just need to refresh packages,but i gave all of them (15 files in total i guess)since i think "mtsorts" and "symbolmt" fonts are important too ,for cedit only courier new in this rar solves the problem that is 180Kb .
ps. cour.ttf might be hidden so you need to disable do not show hidden files to see it.
Click to expand...
Click to collapse
I was too lazy to unpack a rar!
Thanks for the info, and thanks for finding the fonts!
l3v5y said:
I was too lazy to unpack a rar!
Thanks for the info, and thanks for finding the fonts!
Click to expand...
Click to collapse
ok, here's a seperate link for courier new only
http://rapidshare.com/files/119251217/cour.rar.html (only 101kb)
or the zip att.
just have to drop it in /window$ folder or /dump while making one.
Sweeeeet WM XML Editor
http://mobile.orneta.com/products/notepad/download/
I'm currently using it now. Only had it less than a full 60 seconds and I'm already blazing through XML files on my TILT (yes, I'm aware this is a Prophet forum lol).
The actual program is for WM5.0 but I'm running a ROM w/ WM6.5 and it's nooooo problem! Just click the link above and it'll take you to the Save File dialog for the .cab file ^_^ Quick and utterly painless. Only thing I did was go in w/ Total Commander, find an .xml file, go to Properties then associated .xml files w/ the program's .exe =D Might have autoassociated if I opened up the file first but I had previously associated Word Mobile in some attempt to rig up the opening of the file =]
Think you're supposed to buy it but you have 14 days to tinker w/ it. I may see if I can just uninstall/reinstall and see if that clears it. Likely wont but may can find a reg setting for it =] I dont know how much it costs (didn't check that far lol) but I might be very likely to buy it if it doesnt cost very much. It's awfully handy either way!
G'luck!
HTCOmega said:
http://mobile.orneta.com/products/notepad/download/
I'm currently using it now. Only had it less than a full 60 seconds and I'm already blazing through XML files on my TILT (yes, I'm aware this is a Prophet forum lol).
The actual program is for WM5.0 but I'm running a ROM w/ WM6.5 and it's nooooo problem! Just click the link above and it'll take you to the Save File dialog for the .cab file ^_^ Quick and utterly painless. Only thing I did was go in w/ Total Commander, find an .xml file, go to Properties then associated .xml files w/ the program's .exe =D Might have autoassociated if I opened up the file first but I had previously associated Word Mobile in some attempt to rig up the opening of the file =]
Think you're supposed to buy it but you have 14 days to tinker w/ it. I may see if I can just uninstall/reinstall and see if that clears it. Likely wont but may can find a reg setting for it =] I dont know how much it costs (didn't check that far lol) but I might be very likely to buy it if it doesnt cost very much. It's awfully handy either way!
G'luck!
Click to expand...
Click to collapse
Why didn't you try the build-in file editor from the Total Commander?
for simple editing and save /save as.... OK ( as I use it for .txt .xml editing)
Hi I tested l3v5y editor. But what I need is a windows mobile XML Editor offering tree view. Anybody knows a solution?
Thanks a lot.
Juan
SMS (Short Messege Sevice) AKA Text Messege
Hello I'll make this short. For those who where having SMS issue when flashing new roms. Meaning you read the messege and didnt tougle up or down to select new text leading to manila saying you still have 2 messege unread. And in reality you already read them but the notice never cleared. To fix this issue you had to either highlight the bold text to clear it, or you could have switched off of threaded messeges. The problem come from a dll file called htmlhome. This file can be located in the windows dir and I am supplying a working dll file that I test myself and has removed this annoying bug for me so enjoy.
htmlnotetextmessegefix.zip
Here is how to install, with total comander unzip into the windows dir and soft reset. Test and you will see that it works
ps. I have a at&t fuze so please make sure you back up your original if this doesnt work for you.
UPDATE CAB VERsion
htmlnotetextmessegefix.cab
have not tested but same file, dont know if its unistallable, so be safe and back up, if you try this fix say thanks it will help those who are not aware there is a fix
how do you "Unzip" in TC? i know how to zip, but unzip?
Gundem said:
how do you "Unzip" in TC? i know how to zip, but unzip?
Click to expand...
Click to collapse
open "TC", go to folder where file was saved, double click on file, select and hold dll file till sub menu pops up, select unzip, click Tree option, select windows folder (windows folder on your device not storage card) click ok, and click ok. let me know if you need more help.
i think i just screwed myself...I'm in SMS/MMS screen and can't do anything. i select reply at the bottom of the screen and nothing happens...and i receive Texts (phone vibrates and does the new text sound) but nothing show sup in my inbox...oh no.
Gundem said:
i think i just screwed myself...I'm in SMS/MMS screen and can't do anything. i select reply at the bottom of the screen and nothing happens...and i receive Texts (phone vibrates and does the new text sound) but nothing show sup in my inbox...oh no.
Click to expand...
Click to collapse
not a problem, i dont know how this happene??? it worked fine for me. is anyone else having this issue would be great. when posting bugs can you specify if you tried other software prior to the fixs? what model phone ar you runningand is it a custom rom? dll files can be tricky but as long as you followed my directions you will be fine. i would suggest you do a clear storage and before you apply any other dlls try the one i posted and reply to this thread to see if you duplicate that error.
Hey, I just wanted to thank you for this fix. Its working fine on my AT&T fuze. No problems at all.
guevr001 said:
not a problem, i dont know how this happene??? it worked fine for me. is anyone else having this issue would be great. when posting bugs can you specify if you tried other software prior to the fixs? what model phone ar you runningand is it a custom rom? dll files can be tricky but as long as you followed my directions you will be fine. i would suggest you do a clear storage and before you apply any other dlls try the one i posted and reply to this thread to see if you duplicate that error.
Click to expand...
Click to collapse
i fixed it (the SMS problem) i sprite back up'd everything but the htmlhome.dll folder, then hard reset, then restore. so its fixed now.
I'm running Fuze, RC3 Rom and am scared to do this again.
Gundem said:
i fixed it (the SMS problem) i sprite back up'd everything but the htmlhome.dll folder, then hard reset, then restore. so its fixed now.
I'm running Fuze, RC3 Rom and am scared to do this again.
Click to expand...
Click to collapse
oh Im happy you got it back up. I noticed you posted a question inregards to this issue in another Thread. I hope you can get it fixed I know its an annoying little bug. Well cant say I didnt post on the first thread to back up your dll file. I made a cab you can try that but its the same dll and you still need to back it up. but for the most part the files been a success. Good Luck buddy.
ps i tried the fix on the rom you asked for a fixs and it works on that one but the chef fixed it on his latest rom (currently testing without my dll fixs)
sorry wrong post
works great on my Touch Pro, thanks!
guevr001 said:
oh Im happy you got it back up. I noticed you posted a question inregards to this issue in another Thread. I hope you can get it fixed I know its an annoying little bug. Well cant say I didnt post on the first thread to back up your dll file. I made a cab you can try that but its the same dll and you still need to back it up. but for the most part the files been a success. Good Luck buddy.
ps i tried the fix on the rom you asked for a fixs and it works on that one but the chef fixed it on his latest rom (currently testing without my dll fixs)
Click to expand...
Click to collapse
thanks for hard work man.
i will back up and give it a try when i get home today. The cab can be in the root folder right? (Just being cautious)
@[email protected]
Did you run the cab?
Gundem said:
thanks for hard work man.
i will back up and give it a try when i get home today. The cab can be in the root folder right? (Just being cautious)
@[email protected]
Did you run the cab?
Click to expand...
Click to collapse
yeah back up your htmlnote.dll file somewhere out side of the windows folder. install to the device and it will install in the proper folder(windows)ps I didnt run it because its already fixed in the rom I am useing but it would be a good idea to keep this cab handy if you ever need it again
guevr001 said:
yeah back up your htmlnote.dll file somewhere out side of the windows folder. install to the device and it will install in the proper folder(windows)ps I didnt run it because its already fixed in the rom I am useing but it would be a good idea to keep this cab handy if you ever need it again
Click to expand...
Click to collapse
cool cool
you said you were running RC4 Beta...how is it? ETA?
right now romeos, trying to learn all the need stuff to cook my own custom rom
guevr001 said:
right now romeos, trying to learn all the need stuff to cook my own custom rom
Click to expand...
Click to collapse
oh...thought you were running the beta. i was surprised.
Gundem said:
thanks for hard work man.
i will back up and give it a try when i get home today. The cab can be in the root folder right? (Just being cautious)
@[email protected]
Did you run the cab?
Click to expand...
Click to collapse
yeap. the process went smoothly.
so, u got to tell me how to move a file that says every time i try that its write protected? i have tried everything, i want to fix my SMS problem... the TC won't find my phone and im not the admin of my fuze so i cant copy or write or over write files.... HELP.
GREAT
Thanx this work perfectly..... I was gettin annoyed by it
Unfortunately, this doesn't work in Windows Mobile 6.5. It gives you weird artifacts in the threaded message screen. So heads up if you try to install it on a 6.5 build. However, it IS uninstallable (if you use the CAB). So don't be afraid to test it out!
Thanks!
Downloaded the zip file to my desktop, then activesynced it to my phone. Opened it in File Explorer on my FUZE and used the preinstalled zip program to extract the file to the Windows folder. It asked if I wanted to replace the file and I said "yes to all." Worked immediately! Thanks!