Upgradeing With Vista? - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

I have been trying to update my 8525 using my vista computer but it never worksi do have a xp but i dont feel like going all this work when i can just use my vista computer?

Could you do it?

search the forum for vista drivers, I always go to BOTTLOADER mode before I flash a ROM, try it.
use the search, use the WIKI.

Are you running Windows Mobile Device Center 6.1?
i havnt had to bother playing around with drivers after a clean install of Vista and latest version of WMDC.
I've been able to flash directly from RUU, while phone is in Windows Mobile.

I'm running Vista and I have no trouble upgrading my ROM.
But I have installed the latest Windows Mobile Device Centre upgrade. Before that it wouldn't work properly.
You should be able to get it via the Windows Update page (optional software, I think).
If not, wait till the end of the month when SP1 is released, and it should be included in that.

Anyway of doing this?

LlamaLord said:
Anyway of doing this?
Click to expand...
Click to collapse
err.....doesn't post #3, #4, and #5 answer your question

Thank you ranova!!!!!!!!!!
Thank you soooooooo much!!! I have been going CRAZY trying to update my ROM while in bootloader mode. (I could never get it to work that way.) I was too scared to try it while in Windows Mobile mode. I saw your post and saw that this was the way you did it and it worked for you. I tried it and hey, it WORKED!!!! Thanks again!!!

Related

Upgrade ROM with MS Vista

Hi .
I'm planning on upgrading the rom on my MDA Vario II (Dutch).
First I want to unlock the CID. I've got a 1.04 bootloader.
Recently I upgraded to MS Vista (RTM).
When I try to run the patched radio upgrade I always get a ERROR 150.
Yes.. I'm in bootloader mode. It's says IPL-1.01 and HERM300 SPL-1.04.
Could it be Vista??
yes its vista its had something to do with the sync tool in vista they will fix it according to a earlier post next time use the search function there is a thread about Vista and Ruu
I don't think they have released Mobile Device Center for Vista RTM yet... Right now, you see the phone as a drive... Or did you install the beta MDC?
both. I access the phone through the explorer. And I have the beta MDC setup for syncing with outlook etc.
This has been posted a million times, but here we go...upgrading ROMs will not work on Vista until manufactuers update their usb driver code on the installer; until then, use XP/2003. By the way, is that pirated Vista you have?
cant he just upgrade the rom from SD? I have a (legit) final of vista, but havent tested it yet, since i dont see the need for an uprade atm.
I have the Mobile Device Center installed and it all works perfect.
So, if you cannot do it, due to a bug in Vista, maybe the SD works
You have to be careful as if the program crashes during the upgrade of the rom you can brick your device, so I will stay with XP or SD card way to flash a rom.
aquasesh said:
cant he just upgrade the rom from SD? I have a (legit) final of vista, but havent tested it yet, since i dont see the need for an uprade atm.
I have the Mobile Device Center installed and it all works perfect.
So, if you cannot do it, due to a bug in Vista, maybe the SD works
Click to expand...
Click to collapse
I have Vista RTM and I confirm that the MDC is not stable enough for all these update work... it failed for me a few times and I'm lucky with my 8525 and it is still working OK after reflashing it with another PC (XP).
Aha. That explains that.
I've just managed to get my JasJar stuck in bootloader mode after trying many times to upgrade the ROM. This, despite the upgrade tools telling me there are errors.
Curses.
Apparently people don't know how to read what I posted...
ITS SAFE
I already flashed my Universal with Vista
-First need to install MDC, could be beta from MSDN, because it will update.(still don't know why it's not included on RTM)
-Run compability mode WIN XPSP2
-Run as Adm
thats it...
ISN'T Safe!
phamoui said:
I already flashed my Universal with Vista
-First need to install MDC, could be beta from MSDN, because it will update.(still don't know why it's not included on RTM)
-Run compability mode WIN XPSP2
-Run as Adm
thats it...
Click to expand...
Click to collapse
I am testing vista since CTP (Community Technology Preview), then RC1 (Release Candidate), RC2, now RTM (Ready To Market) as Technet Plus Member.
I can't say is safe to use it even for day by day syncing, I have always unpredictable results; my TyTn sometimes is a Smartphone, sometimes Pocket PC, syncing? may be, every time you connect you have to guess...
This happens because Windows Mobile Device Center (WMDC not included in Vista RTM) is still in BETA 3 stage, not even RC!
LESSON LEARNED
If you plan to install VISTA and you are a WM expert or just business user DON'T upgrade your XP, just install VISTA on a second HD and use your XP to solve the VISTA problems. Even Virtual PC 2007 (good to have with XP installed to have available some appz still not VISTA upgraded) couldn't use USB port, so no way to have a safe "old style" USB connection
Isn't VISTA fault, is a new tecnologies-early adopters problem
One of the most common source of problems with vista are USB drivers (no way in my knowledge to have a simple webcam working with VISTA)
This has great importance when you are doing something "uncommon" and "mission critical" like flashing something!

Upgrades using VISTA

I am in an all VISTA house...
Has anyone found a way to upgrade using vista as of yet?
The information and driver located at http://forum.xda-developers.com/showthread.php?t=291723 works for me in doing a mtty upgrade. As for doing an entire ROM update using the full utility, I don't know... MTTY is faster, thus why I do it.
My problem is with my Cingular 8525 I need to first flash to a previous rom.
Need to use the EXE to do that and that USB driver appears to ONLY work with RUU or MTTY.
rgreenpc said:
I am in an all VISTA house...
Has anyone found a way to upgrade using vista as of yet?
Click to expand...
Click to collapse
It would be ALOT safer to not brick your device, it you dual-booted your PC and had XP available. I wouldn't want to take a chance on bricking device unless I REALLY had too, dual boot is not that hard.
Sadly... you can't install XP after VISTA because of changes to the bootloaders that Vista Uses.... you can do XP then Vista but not vice versa.
Learned this the hard way during the beta.
rgreenpc said:
Sadly... you can't install XP after VISTA because of changes to the bootloaders that Vista Uses.... you can do XP then Vista but not vice versa.
Learned this the hard way during the beta.
Click to expand...
Click to collapse
Good to know if I get ahold of Vista.
Good news... my sister-in-law still hasn't used the upgrade to VISTA that I got her, so I guess I can at least roll bacK, SuperCID, then flash to the new rom.
That way I can use POF's new v3 unlocker later when someone comes up with a magic WM6.
The one thing I hope is that the programmers out here do get their hands on VISTA as more and more people are going to get PCs that come with Vista on them and will have little choice to use it.
I am just glad I was able to do this for now....
The final version of Windows Mobile Device Center has been released and I have not had any issues doing ROM updates with the final version.
Secondly, you can use a utility call Easy BCD to modify the Windows Vista bootloader so that you can dual boot Windows XP on a computer that already has Windows Vista installed. You just install Windows XP on a separate partiotion from Vista. The computer will then only boot to Windows XP. Put the Windows Vista DVD in and do a repair and the PC will now just boot into Vista. You can then run the Easy BCD tool in Vista and tell it where you installed XP and it will modify the bootloader so that Windows XP will show up in the boot menu. The bootloader changes can also be done manually but the utility is much simplier (http://support.microsoft.com/kb/919529)
The link to the Easy BCD software is: http://neosmart.net/dl.php?id=1
rkorzuch said:
The final version of Windows Mobile Device Center has been released and I have not had any issues doing ROM updates with the final version.
Secondly, you can use a utility call Easy BCD to modify the Windows Vista bootloader so that you can dual boot Windows XP on a computer that already has Windows Vista installed. You just install Windows XP on a separate partiotion from Vista. The computer will then only boot to Windows XP. Put the Windows Vista DVD in and do a repair and the PC will now just boot into Vista. You can then run the Easy BCD tool in Vista and tell it where you installed XP and it will modify the bootloader so that Windows XP will show up in the boot menu. The bootloader changes can also be done manually but the utility is much simplier (http://support.microsoft.com/kb/919529)
The link to the Easy BCD software is: http://neosmart.net/dl.php?id=1
Click to expand...
Click to collapse
Are you saying that you have done ROM updates in Vista through WMDC Final? I tried this but it did not work. If you have done it then I may try again.
rkorzuch said:
The final version of Windows Mobile Device Center has been released and I have not had any issues doing ROM updates with the final version.
Click to expand...
Click to collapse
Perhaps I need to look at it again then... when I tried it I had no luck.
I don't want the hassle of modifying windows if I dont have to.
What updates have you done with WMDC?
@rgreen: if you're keen on buying everyone vista, i'll take a copy

ATTN Mac users... RUU update via Parallels?

Has anyone tried it? Ever since moving to a MacBook Pro, I no longer have a PC at home or work. I've got WinXP running just nicely with the few apps I need for work under Parallels. It's brilliant.
But I've got my HTC TyTN and was wondering if anyone has tried upgrading under Windows running on Parallels? Parallels' USB support seems to be fabulous, but when you're talking about blasting ROMs... well, figured I'd ask first.
You can also upgrade from OS X:
http://forum.xda-developers.com/showthread.php?t=296436
Lovely! You're the man, pof... oops, haven't installed dev tools yet. Gotta wait for that download!
sickchilly said:
Has anyone tried it? Ever since moving to a MacBook Pro, I no longer have a PC at home or work. I've got WinXP running just nicely with the few apps I need for work under Parallels. It's brilliant.
But I've got my HTC TyTN and was wondering if anyone has tried upgrading under Windows running on Parallels? Parallels' USB support seems to be fabulous, but when you're talking about blasting ROMs... well, figured I'd ask first.
Click to expand...
Click to collapse
I have updated a number of times on my 8525 from an XP VM on a Macbook 2GHZ with 2GB of RAM. I would advise that you close all Rosetta aps before running an updater -- I was worried about system hangs due to resource allocation issues. No problems for me at all with the last 3-4 builds of Parallels.
sickchilly said:
Has anyone tried it? Ever since moving to a MacBook Pro, I no longer have a PC at home or work. I've got WinXP running just nicely with the few apps I need for work under Parallels. It's brilliant.
But I've got my HTC TyTN and was wondering if anyone has tried upgrading under Windows running on Parallels? Parallels' USB support seems to be fabulous, but when you're talking about blasting ROMs... well, figured I'd ask first.
Click to expand...
Click to collapse
I was not able to flash with parallels. OSX would take over the USB, and won't release to parallels when the phone reboots in bootloader mode. Bootcamp with XP worked perfectly for me.
I just went ahead and tried it under Parallels for S&G's... I'm using the latest version of Parallels and have the "connect USB devices automatically" option checked on my VM config. That option might be why it works. Oh, and I successfully updated to Cingular 2.06.

WM5 upgrade in bootloader mode doesn't work

Hello,
I tried to upgrade my SPV M1000 to WM5. I followed the procedure and ran the device in bootloader mode. I put the device on the cradle and it displayed USB and V1.06. Ok sounded good.
I started then the HimaUpgradeUt.exe program on the PC. The problem is HimaUpgradeUt.exe didn't find the mobile device at all. After maybe 1 minute looking to it displayed an error 101 message.
I tried different things : install ActiveSync 3.8, 4.2, 4.5 (no change)
I tried to connect the device with mty and it worked !
I tried to run HimaUpgradeUt.exe with the SPV running WM2003 and it found the device. I didn't try to upgrade in this mode anyway.
Any help is very welcome.
is your machine with win vista also?
as you said that you tryed to install ActiveSync 3.8, 4.2, 4.5, guess its WinXP. if its 2000/WinXP/win2003 then use only 4.2 version of ActiveSync. don't know why but i can only have sucess with that version. check for any security software that may block COM. with ActiveSync-Pocketpc.
that HimaUpgradeUt.exe you use is for your model? as im not an expert on this matter, don't know if your precise phone is a himalaya, maybe thats the prob. ehehhe then maybe not as im not aware of all the brands this peace of tech can became!
do right click on my computer and select manage, goto device manager and see for a mobile entry there, while your pocket is connected in serial/usb boot mode. there must be a windows ce device there for this to happen, and you should, not a must, but try to shut activesynch down while doing this detection with HimaUpgradeUt
Yes I'm running Windows XP Pro SP2. I installed activesync 4.2 again and disabled the firewall. I can see windows detecting the device when I put it on the cradle. But there is still the 101 error message when I try to run the update.
Vista and upgrade
Firstly thanks to marcjero for guiding me to this thread...
secondly... I had no probs at all, syncing my device with vista's WMDC(Windows mobile device center), apparently I tried to flash my device... and yes its an i-mate XDA II, currently running on C_ShekharAKU3.5.R40.P24_public_ROM and want to update to the latest one... apparently, connected my device to my system in bootloader mode... and well since then my system has a prob detecting my device... and I cannot even sync now... when i try to run HimaUpgrade, get the same 101 error code... :-(
any ideas how to get this thing working again?
PS: its seriously frustrating for me
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
syncing not working either...
xda2jojo said:
you cannot flash the device except in winxp...
jojo
Click to expand...
Click to collapse
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
xda2jojo said:
use the "HimaUpgradeUt_noID.exe " instead the "HimaUpgradeUt.exe"
download it HERE!
install the latest Active Sync...version 4.5
Syncing in Vista is no problem but as i said from other thread...i tried but not working...you cannot flash the device except in winxp...
Regards!
jojo
Click to expand...
Click to collapse
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
daWidoW said:
The prob is that now a normal sync does not work either... so I cannot synchronize my device with my system at all :-(, any ideas at all... on how to get it to work?
Click to expand...
Click to collapse
marcjero said:
I tried both (as 4.5) and HimaUpgradeUt_noID.exe without any success.
Click to expand...
Click to collapse
what OS you are using while flashing and synching? xp? vista?
I'm running XP SP2
About Vista...
Read this thread
Could worth to try.
I tried to flash using my work laptop and it's working now
44% processed, finger are crossed...

Unable to Sync or Flash under Vista

Ok guys, It wont freaking sync with my phone. It goes into usb mode automatically. I can't flash or even upgrade the rom?
I followed a guide with custom drivers to enable it. So I did. It still DONT WORK.
Help!
lildanik said:
Ok guys, It wont freaking sync with my phone. It goes into usb mode automatically. I can't flash or even upgrade the rom?
I followed a guide with custom drivers to enable it. So I did. It still DONT WORK.
Help!
Click to expand...
Click to collapse
now this isnt really a Hermes Windows Mobile 6 issue... it should have been created in "Hermes" or "Hermes Upgrading etc"...
did you follow the guide on www.mrvanx.org ?? try a different USB port?
try upgrading to Windows Mobile Device Center 6.1
http://www.microsoft.com/windowsmobile/devicecenter.mspx
Thread moved and given a more descriptive title.

Categories

Resources