Is there any bluetooth/wired keyboard that works with the Touch Cruise and doesn't cost a fortune like most of those I found cost.
Svante.
http://www.pdashop.nl/product/46824/igo-ultra-slim-bluetooth-keyboard-qwerty.html
I've bought this one 2 weeks ago, it works perfectly, but since I found out about Mymobiler
http://www.freewareppc.com/utilities/mymobiler.shtml
I don't use it very much.
Louis said:
http://www.pdashop.nl/product/46824/igo-ultra-slim-bluetooth-keyboard-qwerty.html
I've bought this one 2 weeks ago, it works perfectly, ......
I don't use it very much.
Click to expand...
Click to collapse
Interesting... I was looking at this keyboard on the IGO webset prior to purchase, and it was unclear to me whether it was supported by WM6.
Please can you confirm that you've used this successfully with an Orbit2 / Touch Cruise. Thanks in advance,
Roy.
I think it doesn't really matter wat OS your are using as long as you have bluetooth it should work fine, but I'm not sure.
I can confirm it works with WM6 on my Touch Cruise.
Hi,
I am using a Targus Thumbpad (ACB31FR)
I don't know about the driver because i have not installed it yet.
The keyboard works with the "native" support of the Cruise, without the é, è, û etc ... but it works like a charm. only ~55€ on the internet.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PS : if someone knows a driver witch don't need an "activation" by targus : i'm interested because i've made a mistake with the online activation (erroneous device code, so erroneous unlock code )
igo BT Keyboard
I have the iGo BT Keyboard - Fantastic, I now no longer carry the laptop to all meetings! I do not use paper and type everything - more environmental, cost savings, and not to mention meeting notes are typed up at the time!
It works really well.
Kind Regards,
Will
@louis and William Richardson:
I have an O2 Orbit 2 and am also planning to buy the IGO Bluetooth Keyboard as it looks really handy and isn't really expensive on the internet.
As I understood it, you have it working on a touch cruise/orbit 2... did you install any drivers or did it work "out of the box"? if you installed drivers, which ones?
thanks in advance,
rufmalan
Here is an older one, but the same price like stowaway (iGO):
http://www.freedominput.com/site/index.php?option=com_content&task=view&id=15&Itemid=96
And a newcomer, that i really wants to get when it will available:
http://www.freedominput.com/site/index.php?option=com_content&task=view&id=13&Itemid=30
rufmalan said:
@louis and William Richardson:
I have an O2 Orbit 2 and am also planning to buy the IGO Bluetooth Keyboard as it looks really handy and isn't really expensive on the internet.
As I understood it, you have it working on a touch cruise/orbit 2... did you install any drivers or did it work "out of the box"? if you installed drivers, which ones?
thanks in advance,
rufmalan
Click to expand...
Click to collapse
Hello mate - works straight out of the box.... very good, you can also train it with approx 10 short cut keys...
Will
eami said:
Here is an older one, but the same price like stowaway (iGO):
http://www.freedominput.com/site/index.php?option=com_content&task=view&id=15&Itemid=96
And a newcomer, that i really wants to get when it will available:
http://www.freedominput.com/site/index.php?option=com_content&task=view&id=13&Itemid=30
Click to expand...
Click to collapse
The freedom input looks good but the igo is of a similar size stored away but turns into a large keyboard...... I would prefer it to be a full sized keyboard. I would then use it with my laptop as well.....
i think the igo does what says, a proper keyboard for a pda. the one above is another small keyboard! use the pda!
Will
@William Richardson: thanx for the quick answer - i think i will order the igo very soon. *g*
William Richardson said:
The freedom input looks good but the igo is of a similar size stored away but turns into a large keyboard...... I would prefer it to be a full sized keyboard. I would then use it with my laptop as well.....
i think the igo does what says, a proper keyboard for a pda. the one above is another small keyboard! use the pda!
Will
Click to expand...
Click to collapse
Yes, iGO is really amazing. I had one. Unfortunatelly there are several situation when freedom slim keyboard could be much more usable. I bet on both
to all of you who have an igo bluetooth keyboard working with the touch cruise:
i bought one yesterday, it came today and i was eagerly unpacking and installing it when... it didn't work!
i installed the drivers, reset the device and wanted to pair the keyboard with the pda, but didn't get the keyboard to turn "detectable".
i pressed the "ctrl"+"rfn"+"lfn"-combo - but without result.
the green led indicating that the keyboard is in detectable state flashed once, i entered a pin for save connection, and that was it.
the keyboard did not connect with my pda and does not react to the 3-key-combo any more.
do you have any idea what could be wrong?
i'd greatly appreciate your help, because otherwise i'd have to send the keyboard back - which i don't really want to do.
thanks in advance!
www.mymemory.co.uk are doing the iGo stowaway's for £20 delivered! I just ordered two!
Thought I'd let u guys know!
rufmalan said:
to all of you who have an igo bluetooth keyboard working with the touch cruise:
i bought one yesterday, it came today and i was eagerly unpacking and installing it when... it didn't work!
i installed the drivers, reset the device and wanted to pair the keyboard with the pda, but didn't get the keyboard to turn "detectable".
i pressed the "ctrl"+"rfn"+"lfn"-combo - but without result.
the green led indicating that the keyboard is in detectable state flashed once, i entered a pin for save connection, and that was it.
the keyboard did not connect with my pda and does not react to the 3-key-combo any more.
do you have any idea what could be wrong?
i'd greatly appreciate your help, because otherwise i'd have to send the keyboard back - which i don't really want to do.
thanks in advance!
Click to expand...
Click to collapse
I'm not sure, since i sold mine, but try to check the advance options at the keyboards software...
which driver for iGO ultra-slim BT stowaway?
What driver are people using for the iGO Stowaway Ultra-Slim BT Keyboard? If you look at their wesbite, the Polaris is not supported:
http://www.mobilityelectronics.com/support/Drivers.asp?ManufacturerID=13
I managed to get my keyboard going without a driver, its nice, but very few of the dedicated Fn keys work (or work correctly) and I don't see the keyboard icon on my TC screen in order to start 'training' the keyboard. I guess because I have no specific driver installed?
So which was is best?
Thanks
I use the drivers of the attachement. They´re for wm5, but works fine with my cruise.
alek77es- thanks very much
Couple of quick Qs:
1. How to turn off the anoying keyboard clicking sound?
2. cab also installed the mouse driver. I don't have one. (Any good?). Don't worry about it, or can I uninstall mouse part only?
Thx
iGo Keyboard Driver hangs Camera Album application
I have an Xda Orbit2 (aka HTC Touch Cruise aka Polaris) running WM6.
I can confirm that the iGo Stowaway Ultra-Slim Bluetooth Keyboard does work with it but there is a problem. Whenever the iGo driver is installed, if I try to open the Camera Album application it just hangs. If I uninstall the driver, it works fine again; reinstall it and the problem returns.
Has anyone else experienced this? If so, does anyone have any suggestions for a solution?
Thanks in anticipation.
Apple wireless keyboard for me...
I had an Apple Wireless keyboard.. and after reading about pairing it with a ppc here: http://www.fortrel.net/blog/index.p...ows_m&page=1&more=1&c=1&tb=1&pb=1&disp=single
I said why not give it a shot... and it works flawlessly.. super, as you may know the Apple wireless keyboard is not foldable, but its slim and light and shorter than a full keyboard. Very convenient to type long word documents. Worth buying it, looks super cool too.
Related
This is my first cooked ROM, a challenge I took up from 'Josh' and a regular customer for whom I flash....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Everything works smoothly with the OS. However 3G DID NOT WORK before or after the upgrade on the device we tested (a radio issue??)
....if anyone has it working, plz let me know which radio you have.
Applications such as TouchFlo, etc., are installed by using the Device Updater. I like this feature the most, as it leaves the ROM itself 'lite'.
Applications outside of the Device Updater repository I recommend:
HardSPL_v7
IMGChangeFont
SIPConfig Tool
CommManager3G
Touch Cube
Directly download the blue ones, others will be attached below.
THIS IS A BETA ROM - PLEASE POST ANY ISSUES..... I WON'T BE HELD RESPONSIBLE FOR DAMAGES OF ANY KIND.... AND PLEASE USE HardSPL v7 TO AVOID BRICKING
and TO FIX BAD BLOCKS !!!
HERE'S MY ROM (updated link)
Thanks to everyone who made this possible and especially to 'Josh' for his kitchen.
Sweet, another chef in the kitchen...
Will try out soon..
Just one thing though, you will probably find this post moved to the WM06 thread as that is where all new roms are found.
Cheers...
WOW Congrats on the new rom sir!!
I get following on download link
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.
i've a problem........it's all ok but camera doesn't work!!
camera
The camera worked on our test device, the 8525. Is that what you installed it on??
Please give more details. Can you bring up the application? Have you tried taking a photo by pressing the center joystick?
The regular customer I have also had trouble operating the camera until I showed him he could snap pictures by pressing the joystick.
I can only tell you what worked for us.
PLEASE NOTE, YOU NEED A NEW PHONE SKIN FOR VIDEO CALLS. You could try this one. Let me know if it works.
yahiye2008 said:
PLEASE NOTE, YOU NEED A NEW PHONE SKIN FOR VIDEO CALLS. You could try this one. Let me know if it works.
Click to expand...
Click to collapse
Didn't try that one yet (tonight), but the Video Phone Dialer from "Jasjamming's" Black Satin seems to work great with it so far!
Is this Rom work properly on the jas Jam
In terms of performance and the strength of the battery and commentary
Please help
Hello every body ,
When I tried to download the link http://rs717.rapidshare.com/files/211502307/wm_6.5_hermes_v1.zip ,
It seemed to me it is impossible to download the file through Rapidshare (I think there is a problem in the servers of my country ), could any one help to download it from another filesharing website instead of rapidshare, please , please please .
error (270)
When I start upgrading my Hermes withis ROM it goes to 1% after that an error appears
(error [270] : update error the image file os corrupted . please check your update utility ) , I don't know is it from the bootloader or ????
Please help me guys ...
Great Job!
Okay, I just want to tell you that I'm having the time of my life with this new build. You have done a fantastic job!!
Good. I am happy to hear that. If you have any suggestions for future builds please let me know !!
Do you have 3G working?? BTW If anyone needs VoIP in a country where SIP is blocked, I have a good IAX softphone that works over 3G using the GSM codec. I working on setting up some Asterisk servers and will be able to offer termination/biliing soon
This is great! Today i installed wm 6.5 on my SPV M3100 and everything works OK. Right now I am using device update to install more applications. This is cool stuff..
Thanx for your coocking...
Great Rom.
Works great but having turned off and then had dinner went to turn phone on and the htc screen hangs.
Trying a hard reset.
Fingers crossed as this really looks great.
Suebythesea said:
Great Rom.
Works great but having turned off and then had dinner went to turn phone on and the htc screen hangs.
Trying a hard reset.
Fingers crossed as this really looks great.
Click to expand...
Click to collapse
If your screen hangs you may have bad blocks on the drive. Try upgrading to HardSPL v7 to fix them, if you haven't done so already...
I bought my TyTn more than 1y ago second hand and i've been running Schaps Theme 2.54 ever since without even knowing it and I am trying your ROM as the first upgrade ever done by my hands. so far so good, everything went smoothly and I must say it's an excellent piece of work and that i'm absolutely loving the WinMo Black theme.
However, i have some comments/questions:
1 - after boot, upon getting to the PIN-dialing screen i just get the top bar and no keyboard nor buttons image, i have to type my SIM PIN by guessing the numbers' spots on the screen. is this normal, and if not how can i circumvent it?
2 - configuring the Today screen Titanium item - is there any possibility to remove some items and/or reduce the font size, or will it be necessary to take it to the kitchen?
Once again, thank you very much for this piece of work
update: after further insight, i found there's no Office or PDF reading support, correct? i'm asuming i'll have to downgrade to a 6.0 ou 6.1 ROM, correct? also, how do i get rid of the damn startup splash screen? currently it runs the carrier's logo, but i just want it to never show again
Hey...
Use IMGChangeFont for changing the font and size.
There are tutorials somewhere in one of the forums for writing config files for Titanium. I haven't messed with it much... you are pretty much on your own if you want to remove items, but it CAN be done.
You can download Office here if you can't find it under Device Update.
Regarding the SIM PIN keyboard, I don't know what to say, except to try using the sliding keypad or do a hard reset, then try again.
The splashscreens are called welcomehead.96.png and can be swapped out by renaming them .. is Windows Mobile 6.5 the screen you are referring to?
well now that i've placed a picture on the background it does look nicer. i actually just wanted to remove some of the features which i do not use, but it's ok anyways.
got the office download, will install asap..thanks for the link.
regarding the splash screen... before the Windows Mobile 6.5 shows up i get a Vodafone image. it was there even before i flashed my TyTn with this ROM and i'd very much like to remove it permanentely.
thanks for all the help.
ok...look at this post if you want to try changing your vodafone screen
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
interesting tho, I upgraded my friends vodaphone Asus p525 and afterwards the screen was gone. i didn't do anything but run the ruu. needless to say, he was happy that he didn't have to look at it anymore.
good luck
ok, i'll try and see if the Vodafone thing becomes history but for not now i got these here doubts:
- is it possible, and if so how can i configure the VJCandeaLite to turn on and off with a press of button and not be dependant of keeping the assigned button pushed?
- there's some stuff I personally don't need, nameley Live Search, MSN Money and Windows Live. since i have no use for these i would like them removed cause i'm picky with this stuff. does it imply just a registry tweak or taking the cabinets to the kitchen?
and one n00b question:
- how do i install the Office suite? and also the two programs you deemed necessary - CommManager3G and Touch Cube - what use do they have actually?
This ROM is based CE OS 5.2.21040 (Build 21040.1.6.0). ROM dump for Rhodium test device.
TF3D2 is included but needs to be updated with the update patch from Xboxmod.
Please test bluetooth, bluetooth headset, activesync, GPRS, and all other basic functions. Please do not post about Manila bugs. I know it gives an error when it first boots and will fix it in a couple of hours.
Just want the basic functions of the phone tested for now to make sure it works.
Thanks!
http://www.4shared.com/file/94911905/67926d50/RUU_signed_Test.html
DOH!
Forgot to add the link in my haste to get to class
Ill try and help you out here since Im a fan of your work, but if you just want the basic functions of the phone tested for now, why not use the first version of TF3D so that it eliminates the current TF3D UI errors. Then, when you want to test out to see how friendly the Rhodium TF3D is with this build, then include it for us to test? That way, if there are bugs we would be able to distinguish if its related to the new build/base rom or its its related to the Rhodium TF3D.
At0mAng,
Looking forward to the surprise awaiting in this ROM.
Keep it up dude.
pkshr
I'm flashing now, I'll let you know what I find. Since, I haven't said it before, thanks for all your hard work, I've been enjoying your rom for the past few days!
Captchunk said:
I'm flashing now, I'll let you know what I find. Since, I haven't said it before, thanks for all your hard work, I've been enjoying your rom for the past few days!
Click to expand...
Click to collapse
No problem and thank you. I just uploaded a new version that has BT drivers in it. For some reason the ROM dump did not have BT drivers with it and I noticed it after I posted the link and after qsqa mentioned it to me
feeling adventurous.
AdamNimrod said:
Ill try and help you out here since Im a fan of your work, but if you just want the basic functions of the phone tested for now, why not use the first version of TF3D so that it eliminates the current TF3D UI errors. Then, when you want to test out to see how friendly the Rhodium TF3D is with this build, then include it for us to test? That way, if there are bugs we would be able to distinguish if its related to the new build/base rom or its its related to the Rhodium TF3D.
Click to expand...
Click to collapse
Party pooper
I've only used ROMeOS over my past few phones and then a little RRE action but since I've used some of your cabs, the most recent one being the agps settings, and I think have some with your name in them on my site, maybe you know what time it is so what the hell, slow day at work, I'll flash yours even though I was up until 4am last night flashing and perfecting the latest RRE. Gotta have the bleeding edge!
Also I want to lock this useless post on your thread nice and early because if it's as pimp tight as I think it might be I'd like to give you a super silly fresh fast mirror and want to link it here.
[edit] here's that mirror.
Here's to us.
Doug
Here goes nothin!
Well, the first thing, and this may be something I'm doing, but I ran connection setup but I have no signal and when I try to open up the phone dialer it gives me the cprog.exe error. I'll edit this post if I find anything else.
Captchunk said:
Well, the first thing, and this may be something I'm doing, but I ran connection setup but I have no signal and when I try to open up the phone dialer it gives me the cprog.exe error. I'll edit this post if I find anything else.
Click to expand...
Click to collapse
Download it again...This version should give no errors...sorry.
I can not test any of the phone functions...phone is broke...I think we all know the story
Just so everyone knows...this is a rough beta...still need to clean sys and do some of my tweaking to it. Clean up icons and such...so be advised it is nowhere near to a finish product.
Okay, will reflash in a moment. Why are all of the Chef's phones breaking? My phone breaks, no cares but me, your phone breaks and all of us flashing addicts are lost! NATF broke his too!
More Rhodium packages
Hi, looks like EnergyROM has hands on with more rhodium apps. You want to consider them in your new version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sundar_amn said:
Hi, looks like EnergyROM has hands on with more rhodium apps. You want to consider them in your new version.
Click to expand...
Click to collapse
Thanks...i know all about the new apps. as i said my phone is broke and i want to make sure the basic functions are working before i start porting the apps.
just want to make sure all basic functions are working. bluetooth headsets, activesync, wireless lan and other basic functions.
i have a new build to post when i am done with classes today...
So far, so good. All of the basic features I have tried, worked as normal. I was able to connect to my bluetooth headset, phone calls have been made, texts have been sent. I entered in my connection settings and have been surfing the net on Opera. Anything else specific that you'd like me to test?
At0mAng said:
Thanks...i know all about the new apps. as i said my phone is broke and i want to make sure the basic functions are working before i start porting the apps.
just want to make sure all basic functions are working. bluetooth headsets, activesync, wireless lan and other basic functions.
i have a new build to post when i am done with classes today...
Click to expand...
Click to collapse
Thanks for the response. I am at work right now and i will test it in another 2-3 hours and will post my results.
Captchunk said:
So far, so good. All of the basic features I have tried, worked as normal. I was able to connect to my bluetooth headset, phone calls have been made, texts have been sent. I entered in my connection settings and have been surfing the net on Opera. Anything else specific that you'd like me to test?
Click to expand...
Click to collapse
Thanks so much! Just daily use stuff...run it through its paces. Did BT headset work after first call? Did you try a few calls in a row...had a wweird bug once before and hope it does not pop up again.
Hi At0mAng,
Looks awesome man....very quick responsive screen..when you will finalize this ver........
krish_nank said:
Looks awesome man....very quick responsive screen..when you will finalize this ver........
Click to expand...
Click to collapse
A few hours after i get out of my classes if nothing nasty pops up
Yeah, BT has worked fine on multiple calls both in and out. The only thing I can't help you with is wifi, mine hasn't worked since I started flashing roms and I have yet to find a fix for it. ActiveSync works fine also.
At0mAng,
One quick question - does this ROM include any time bomb.
Thanks,
pkshr
pkshr said:
At0mAng,
One quick question - does this ROM include any time bomb.
Thanks,
pkshr
Click to expand...
Click to collapse
Yes...I did not hex edit the shell.exe yet...I am still building this. I am basically going through all the DLLs and EXEs one by one to see what can be used and what cant be used. Before I went through all that trouble I wanted to see if all the hardware functions were working correctly.
Current version 1.0.13
OS: Windows Mobile 5.x, 6.x
Languages: English, Chinese, Czech, Dutch, French, German, Greek, Hungarian, Italian, Japanese, Polish, Portuguese, Romanian, Russian, Serbian, Spanish
GPS2day is a small Windows Mobile application designed as Today Screen plug-in.
It supports both metric and U.S. (Imperial) units and shows following information for users:
current geographical coordinates (latitude, longitude), speed, course, altitude,
some information about satellites, exact date and time, battery life status.
This is the useful personal informer in your mobile device.
Version 1.0.13 download page
Application Release History
Alternate download link from the CNET Download.com
for those who have a problem with my site accessibility.
Screen Shots:
Today screen after the GPS2day installation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
GPS2day in action (testing with the fake GPS data)
Wow, I was searching for something similar for months!
But now... I don't need it no more!
Have given it some press : http://www.1800pocketpc.com/2009/12/09/gps2day-todays-screen-gps-toggle-plugin.html
Very good, fast and useful application.......thanks a lot. Works fine on my HD2
I guess since you called it this, you already know about GPSToday, which is an awesome GPS primer, location logger, locating sharing, and map application (and more) in one. I've never noted that it uses much ram, but perhaps your scope is different.
Nice plugin! Is there anyway to change the units? I've looked in the registry, but haven't found anything (specifically I'd like to switch Km/h to m/h).
Farmer Ted said:
Nice plugin! Is there anyway to change the units? I've looked in the registry, but haven't found anything (specifically I'd like to switch Km/h to m/h).
Click to expand...
Click to collapse
As you can see this is the first initial release of the application. Some options will be added in the next subversion.
Did you mean m/h as miles per hour?
Yes, miles/h (not meters/h, lol).
glaucos said:
Wow, I was searching for something similar for months!
But now... I don't need it no more!
Click to expand...
Click to collapse
Good! Probably this program was written for those who really need it.
I'm interesting on such questions related to this application.
1. How it stable and reliable in work. For example, it should restore its working
state when you switch off/switch on your device.
2. Does it recover its working state after showing some errors (warnings)?
3. What errors (warnings) it show?
4. What about resource consuming (CPU, battery, etc...) on the different devices.
Don't hesitate to contact me with your real feedback, opinions and suggestions.
Also you can communicate with me on my site.
Thanks.
The App is very cool, but can you also show the current Cell ID?
Problem with Install
Hey, great looking plugin. Looks just like what I was hunting for, however I ran into a problem upon installation.
I installed it and all of my other plugins on Today disappeared. All that was showing was a date line. The device was then largely locked up (some buttons worked, but not all). Soft resets didn't work so eventually Safe Mode came up (Pocket Plus 4) so that I was able to delete the plugin. After doing so and rebooting it worked fine. Thinking it was a one time deal, I tried again after disabling all of my other plugins. The same problem occurred.
Any thoughts on what might be causing this?
My device:
HTC Touch Pro
WM 6.1 (Original ROM, Factory)
US Cellular (CDMA) Carrier
Thanks in advance!
bh77a said:
Hey, great looking plugin. Looks just like what I was hunting for, however I ran into a problem upon installation.
I installed it and all of my other plugins on Today disappeared. All that was showing was a date line. The device was then largely locked up (some buttons worked, but not all). Soft resets didn't work so eventually Safe Mode came up (Pocket Plus 4) so that I was able to delete the plugin. After doing so and rebooting it worked fine. Thinking it was a one time deal, I tried again after disabling all of my other plugins. The same problem occurred.
Any thoughts on what might be causing this?
My device:
HTC Touch Pro
WM 6.1 (Original ROM, Factory)
US Cellular (CDMA) Carrier
Thanks in advance!
Click to expand...
Click to collapse
This is the first installation problem report after the thousands downloads.
Program was tested under the original Windows Mobile 5.0 Pocket PC, 6.0, 6.1, 6.1.4, 6.5 Professional without similar problem. GPS2day Installation doesn't modify or delete information related to the other plug-ins in registry, which responsible to their installation. So, I think that problem is outside of the GPS2day scope.
Dtrieb said:
The App is very cool, but can you also show the current Cell ID?
Click to expand...
Click to collapse
Sorry for delay in response. You already ask your question in my forum.
Here I've wrote my answer.
Thanks.
glaucos said:
Wow, I was searching for something similar for months!
But now... I don't need it no more!
Click to expand...
Click to collapse
s_v_l said:
Good! Probably this program was written for those who really need it. [...]
Click to expand...
Click to collapse
Time ago I REALLY needed it, now I need less (I bought a Garmin Etrex) , but I need it anyway sometimes, so I'm testing it... without problem
Thankyou
only suggestions i have
is if it could write items to the registry, such as number of sats found..
and if it could show headings like N S SW
etc.
i run both it and gpstoday but i only run gpstoday to read registry settings it provides.
and gpstoday will wake up and look for sats on its own.
i do like your app seems a bit less on cpu.
glaucos said:
Time ago I REALLY needed it, now I need less (I bought a Garmin Etrex) , but I need it anyway sometimes, so I'm testing it... without problem
Thankyou
Click to expand...
Click to collapse
OK, Thanks for your help with testing.
the0ne said:
Have given it some press : http://www.1800pocketpc.com/2009/12/09/gps2day-todays-screen-gps-toggle-plugin.html
Click to expand...
Click to collapse
Thanks for publication.
Very good place.
P.S. Unfortunately not all posts coming to my email box.
Maybe some problem with this forum.
This is a reason of delay in my responses.
nhvoltagenh said:
only suggestions i have
and if it could show headings like N S SW
Click to expand...
Click to collapse
Thanks for your suggestion.
For example, I can show heading in such format:
Course: N 5°33.25′
Both symbolic and more exact value.
nhvoltagenh said:
...
is if it could write items to the registry, such as number of sats found..
...
i run both it and gpstoday but i only run gpstoday to read registry settings it provides.
and gpstoday will wake up and look for sats on its own.
Click to expand...
Click to collapse
GPS2day shows satellites in view and whole satellites number.
This information is not static and can be vary when you working with
GPS receiver during particular session with GPS unit.
I'm not sure that this information should be saved permanently,
because during next session your GPS receiver can find different satellites
number and corresponding number satellites in view. And again, this info
will be vary during this session.
I want to say that program couldn't become owner of this information
because GPS unit is the primary source. If program try to become owner
I think that this is wrong (aberrant) behavior.
nhvoltagenh said:
i do like your app seems a bit less on cpu.
Click to expand...
Click to collapse
Not bad sound.
Thanks.
Additionally to
nhvoltagenh said:
...
Click to expand...
Click to collapse
If you programmer and want some info from GPS2day
contact me through contact form on my site.
I'll suggest to you more accurate solution than registry saving.
Good luck!
Site down ??
I am unable to download this file
I have a Apple Bluetooth keyboard, so I tried to connect it to my Transformer prime. It asks for me to enter a pin, I enter it, and it says connected, but when I go to the web browser/polaris office (or even while doing a search from the launcher), it doesn't type anything. I even messed with all the lang/input settings to see if that was the problem (changed default keyboard to android & Asus and that didnt work either.)
-I had a Galaxy tab 10.1 (running honeycomb 3.2) before my Prime, and it connected to my keyboard perfectly..It connects to my Macbook Pro and my HTC Sensation [running ICS] with no problems, so its definitely not my keyboard that's defective.
-And my bluetooth does work, because I tried to connect my BT mouse, and it worked fine. Just not the keyboard.
-I know most of you have the dock, but I just wanted to see if anyone else had problems getting BT keyboard to connect.
Thanks!
I also had a bluetooth keyboard... i did pair, however it never typed... asus didnt fix it in any updates and i ended up buying the dock... not much of a solution
The Apple bluetooth keyboard did the same exact thing to me. Paired nicely, but that's about it.
I bought a HP Touchpad bluetooth keyboard, and it works like a charm. Every single key types just fine. You miss out on the shortcut keys of the dock, but the keys are bigger on the bluetooth, so there are some advantages.
I can use both the apple blutooth keyboard and mouse on my galaxy nexus so it has nothing to do with them not working on "android" but rather not working on whatever drivers / kernel is used with the TFPrime... I wonder if having the ability to install AOSP roms and Kernels when they unlock the bootloader will remedy this situation... so far none of the software mentioned in any thread has assisted me in getting them to work. both pair perfectly fine with the tablet but when it comes to actual use neither the mouse or keyboard input anything.. i really need this to work while i wait for my dock to ship.. and yes it has to be apple keyboard and mouse because that is what i have laying around and dont want to buy new hardware.
I can use both the apple blutooth keyboard and mouse on my galaxy nexus so it has nothing to do with them not working on "android" but rather not working on whatever drivers / kernel is used with the TFPrime... I wonder if having the ability to install AOSP roms and Kernels when they unlock the bootloader will remedy this situation... so far none of the software mentioned in any thread has assisted me in getting them to work. both pair perfectly fine with the tablet but when it comes to actual use neither the mouse or keyboard input anything.. i really need this to work while i wait for my dock to ship.. and yes it has to be apple keyboard and mouse because that is what i have laying around and dont want to buy new hardware.
If your prime is rooted, just go to android dev. Section and ask Creator of updated drivers thread if apple BT keyboard drivers can be added to his list. I think his name is SaturnDe or something. He asks in his thread if you have any requests to let him know and provide info on device you want supported. Worth a shot. If he does, then you add it to your prime n it should work fine.
Actually this the thread I talking about here: http://forum.xda-developers.com/showthread.php?t=1455382
I had the same thing
ddarvish said:
I can use both the apple blutooth keyboard and mouse on my galaxy nexus so it has nothing to do with them not working on "android" but rather not working on whatever drivers / kernel is used with the TFPrime... I wonder if having the ability to install AOSP roms and Kernels when they unlock the bootloader will remedy this situation... so far none of the software mentioned in any thread has assisted me in getting them to work. both pair perfectly fine with the tablet but when it comes to actual use neither the mouse or keyboard input anything.. i really need this to work while i wait for my dock to ship.. and yes it has to be apple keyboard and mouse because that is what i have laying around and dont want to buy new hardware.
Click to expand...
Click to collapse
I had the same thing happen after the ICS upgrade. This worked for me before the upgrade. I don't know what that means as I haven't had a chance to dig into it.
Solution
Just giving you guys an update, if you go to the market and download bluekeyboard JP, the apple bluetooth keyboard works great. Just the shortcuts on the F1-F12 keys don't all work. But it does type, although it's supported by ads. Connects fairly effortlessly after the first time. There is a pro version for $2.00
demandarin said:
If your prime is rooted, just go to android dev. Section and ask Creator of updated drivers thread if apple BT keyboard drivers can be added to his list. I think his name is SaturnDe or something. He asks in his thread if you have any requests to let him know and provide info on device you want supported. Worth a shot. If he does, then you add it to your prime n it should work fine.
Actually this the thread I talking about here: http://forum.xda-developers.com/showthread.php?t=1455382
Click to expand...
Click to collapse
he has not replied to my request in the thread or via private message. he is useless. also this bluekeyboard jp program hast worked for me yet. cant get it to install plus that wouldnt fix the fact my bluetooth mouse from apple still doesnt work
---------- Post added at 11:04 PM ---------- Previous post was at 10:45 PM ----------
Auramaster said:
Just giving you guys an update, if you go to the market and download bluekeyboard JP, the apple bluetooth keyboard works great. Just the shortcuts on the F1-F12 keys don't all work. But it does type, although it's supported by ads. Connects fairly effortlessly after the first time. There is a pro version for $2.00
Click to expand...
Click to collapse
also how the heck did u download this app... it isnt available for our device in the market.... i had to get it in a roundabout way and it wont even install..
It is on the market...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Auramaster said:
It is on the market...
Click to expand...
Click to collapse
not for me...
Hello guys, I'm a Xperia Mini user with ICS but I have the same issue: a bluetooth mouse what works, and a bluetooth keyboard (an clone of apple keyboard) what connects but don't writes.
As said by the guys, theres the BlueKeyboard JP what I'm uploading for who can't get from market, is extracted of my phone but is the same at market. And Another app that works is the BlueInput.
In face this behavior, and getting success with the apps, well, ICS have support for hidd and in system have the correct keymap... but the OS just don't redirects the keyevents... not sure if a custom kernel capable of redirect the events is an solution... maybe a mod...
http://www.mediafire.com/?6mvc7mpc88p4r6p
cheers
I'm trying to create an solution
http://forum.xda-developers.com/showthread.php?p=30361921#post30361921
I just recieved a Lenovo A588T and it's a pretty good phone if you overlook the 512mb RAM limitation.
But my problem is when it comes to the keyboard, I can only use the physical keys to type numbers, even though the keys have letter imprints, so one would assume that typing is possible with them.
The phone came with AOSP keyboard so I think the seller may have flashed a international keyboard to give me a hand, and the phone language was set to english.
I've tried many keyboards that include options for hardware keyboards to no avain, even null keyboard and with all these I've only been able to type numbers.
Is there anywhere I can find a flashtool and the original ROM for this phone to check if the seller flashed an English keyboard?
How can I type letters using the hardware keys?
Also, there's a button on the top right that depicts a house and a heart, no idea what it does, if I hold it down on the homescreen it asks if I want to activate "easy mode".
Thanks
Ok, I flashed the original firmware using SP_Flash_Tool and an official ROM provided by lenovo, now I have a keyboard called Sogou Input Method wich does respond when I press the keys, but I can only use the spacebar on the screen and the predictions are terrible because it's intended for chinese input.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Totally off topic, but I'm having trouble finding pretty much anything about the Lenovo A588T. Seems like I can't even find any official Lenovo site listing it...
I'm wondering: Did you try or manage to root your A558t or get the Google Play Store working on it? I tried installing Google Play Services w/o root as an APK but it keeps crashing. Haven't had any luck with root either, I tried iRoot/vroot which was listed on lenovosj.com but it's not working.
Hi,
I have recently bought a Lenovo A558T and am also not able to use the qwerty keyboard but I am also a bit slow on computer matters so I didn't fully understand how you actually sorted out the problem.
Could you run me through it again on a blow for blow basis (treat me like a complete idiot) ?
Thanks
Mike
Are you in the US?
Which carrier do you use? From what I can tell, only 2G will be available in the US. I'm seriously thinking about getting this for my mom though. The current phone she is using is running Gingerbread...
What experiences do you have (other than the keyboard)? Did you root it?
Regarding the keyboard, since there are some software keyboards which simulated T9, I would think it shouldn't be difficult for them to add support to a physical keyboard which is providing only numeric keys as input. That is, their software may not work yet with a physical keyboard, but it would seem like it would be a good selling point for their T9-like input if it did support a physical keyboard... Maybe if you ask one of them nicely? For example, there's "(EvenBetter)NumberPad Keyboard", but I noticed it hasn't been updated since 2012!
E-Chan42 said:
I just recieved a Lenovo A588T and it's a pretty good phone if you overlook the 512mb RAM limitation.
But my problem is when it comes to the keyboard, I can only use the physical keys to type numbers, even though the keys have letter imprints, so one would assume that typing is possible with them.
The phone came with AOSP keyboard so I think the seller may have flashed a international keyboard to give me a hand, and the phone language was set to english.
I've tried many keyboards that include options for hardware keyboards to no avain, even null keyboard and with all these I've only been able to type numbers.
Is there anywhere I can find a flashtool and the original ROM for this phone to check if the seller flashed an English keyboard?
How can I type letters using the hardware keys?
Also, there's a button on the top right that depicts a house and a heart, no idea what it does, if I hold it down on the homescreen it asks if I want to activate "easy mode".
Thanks
Click to expand...
Click to collapse
It looks like this is the only topic on this phone on XDA. I guess it's as unpopular as it gets.
E-Chan42, was your issue resolved? How is your current experience with this phone? Liking it? Hating it?
Anyone else anything to share? I'd love to hear your feedback!
Same problem
I have the same phone and using here in the US and I have the same problem with the keyboard. Since the number keys don't work as letters the lower bottom half of the phone is basically useless. I have searched all over and found only this thread so I guess I'm out of luck.
Yeah, sorry I've taken my time to respond, but here's what I've been trying with this phone.
I reinstalled the official lenovo rom with the keyboard app they ship it with. I CAN use the keyboard to type but it's a huge waste of time, because I can't activate non dictionary input and the sugestions it gives are pretty terrible. To the point where it recommends he'j'lo before hello.
I tried another keyboard https://play.google.com/store/apps/details?id=org.nyanya.android.traditionalt9&hl=en wich promissed t9 input and cycle key (like press twice the 2 key for b, thrice for c) but for some reason it doesn't work correctly on this phone, and only outputs the desired keys when you type at a snail pace.
So, to anybody considering this phone, consider another optionor develop a keyboard app.
Anybody got any idea on how to get this working? I'll upload a couple of pics so you get the general idea of what's going on.
http://s24.postimg.org/89dlf2k5h/Screenshot_2014_01_01_00_13_04.png
http://s24.postimg.org/89dlf2k5h/Screenshot_2014_01_01_00_13_04.png
http://s28.postimg.org/dci7xmbp9/Screenshot_2014_01_01_00_12_13.png
I was thinking on trying to get my hands on a Samsung Galaxy Golden ROM and extract the keyboard apk, probably it will have international support but I can't find one anywhere
If you don't mind me asking, where did you find all your info (The official lenovo rom, etc)? I just received the phone and while I do like it a lot I would love to use the keyboard, even if it's snail typing.
E-Chan42 said:
I was thinking on trying to get my hands on a Samsung Galaxy Golden ROM and extract the keyboard apk, probably it will have international support but I can't find one anywhere
Click to expand...
Click to collapse
Yeah, sorry I took my time, but I've been hella busy, here's a link I uploaded to mega with all the stuff related to this phone, flashing software and ROMs included https://mega.co.nz/#!mkAUHabD!ADPmm3AJzI0fIrLgIaS-AWJj51OtjPWXAfhqa-cA6bc
If anybody wants a mirror just ask
I've taken the time to write down my experiences on how to flash the device with a stock firmware by Lenovo, root with SuperSU, CWM recovery and Google apps. You can read it here: myrl.net/article/43
As for the keyboard, the best app I found so far was indeed the one @E-Chan42 already suggested: Traditional T9 Keypad IME - play.google.com/store/apps/details?id=org.nyanya.android.traditionalt9
Getting it directly from the Google Play store doesn't work however as the phone is not listed as supporting this app. Try to google for an apk (be careful where you go) or compile it yourself from the official source code: github.com/Clam-/TraditionalT9
Unfortunately I can't directly link to outside URLs and I just spent about 10 minutes posting this due to ****ing unreadable reCAPTCHAs. Thanks xda-developers!
That tutorial is spot on! I finally have my CWM backups back! I'm so happy!
Do you have any experience with the a588t dropping calls as soon as they're dialed? I can't get mobile data running either, my service provider is correctly displayed on my statusbar as well as my signal strength.
confirmed IB2K7 methods,
you will need to manually enter APN settings for carrier, I use cricket that piggybacks on the AT&T network and have not had a dropped call.
Yeah I set my APN as soon as I powered on my phone, still I think it's strange I my phone identifies my provider's name but can't dial out, same happens with every SIM card I've tried for different companies
Make sure your IMEI numbers match the label on the inside back of your phone. I fixed mine using imei tool from youtube watch?v=c_SRdyZ7DAk but there are a bunch of different methods
Thanks! That really worked! Somewhere along the lines of so much flashing I lost my IMEIs
Hi ya,
I've just received my A588t and having the same problem re-numeric only on keypad ! Did you ever manage to sort it, so the keypad functioned for letters as well as numbers ??!! Have to say it's doing my head in trying to get it to work !!! Kevin
Is there any new updates in regard to this? I just got the phone myself and found this thread. It's quite annoying to find that the keypad isn't fully functional.
If ever I wanted to make it work, do I need to do everything that IB2K7 said? When I got the phone, it's already in english and I could access the play store.
zuein said:
Is there any new updates in regard to this? I just got the phone myself and found this thread. It's quite annoying to find that the keypad isn't fully functional.
If ever I wanted to make it work, do I need to do everything that IB2K7 said? When I got the phone, it's already in english and I could access the play store.
Click to expand...
Click to collapse
There is no need to flash the phone again if it's already English and has Play store installed. The only reason I did this was because mine didn't have Play store installed. So far I haven't found any better solution than what I've written before:
IB2k7 said:
As for the keyboard, the best app I found so far was indeed the one @E-Chan42 already suggested: Traditional T9 Keypad IME - play.google.com/store/apps/details?id=org.nyanya.android.traditionalt9
Getting it directly from the Google Play store doesn't work however as the phone is not listed as supporting this app. Try to google for an apk (be careful where you go) or compile it yourself from the official source code: github.com/Clam-/TraditionalT9
Click to expand...
Click to collapse