can anyone tell me where to unzip
can someone tell where to unzip the unlocker file below
HTC_Hermes_SIM_CID_Unlock_v3a.zip
is on the c drive or does it need to unzipped on the root drive
thanks you
Do you need a sim to unlock or not i have a cingular 8525 cell phone but no sim for that phone
but i have a diffent one called one to one , vodafone, orange,gsm
can i use any of them to start lokiwiz 03a from
thanks
All the info you need to know about the unlocker can be found in the unlocker thread below, please take some time to read all the available info before creating a new thread on the same topic
Free HTC Hermes SIM & CID Unlocker *New* version v3a
Related
I've just received an XDA2 that is locked to the O2 network.
I need to use a UK Vodaphone PAYG Sim in the XDA.
I've run xda2unlock but it tells me that the phone is allready unlocked.
Except, when I use my Voda sim the XDA still wants me to input a code into the SIMlock box!
Any ideas as to what the problem could be?
what do you mean ?
when you softreset your device and it want a code to do anything but
call alarm and such ?
because thats not a simlock code thats just the sim code
You probably followed the xda2unlock link from the front page of www.xda-developers.com into the wiki pages. In the wiki there is still the old version 1.2 of the tool, which doesn't seem to work on Radio 1.10 or so. At least on my UK O2 XDA2 I had the same behaviour as you described.
The good news is: there is a new version that does indeed work (at least, for me it did). Please go to http://forum.xda-developers.com/viewtopic.php?t=6963 where you will find version 2.2 of the xda2unlock tool. This is a program that runs on the PDA itself. It does not require the hard reset or the bootloader mode.
Hope this helps ... Kai
PS: I have updated the 2 wiki pages, to include links to version 2.2, too.
I currently have the above using Rom verdion 3.16.32 ENG. I have tried downloading the unlock programme without succesess. I get the message 'not a valid Win 32 application' Can anyone help so Ican unlock this devise from o2 network
Thanks
First of all welcome to the forum.....
Second:
Would you be so kind to make a backup of the ROM and send it to me?
Process how this can be done is here:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashXDATool
For unlocking I´m nearly 100% sure that you require a different ROM on your device. The unlock tool you have doanlooaded should be run on your Wallaby device....
But it requires the Wireless modem function in the ROM, and i think this is not available in your ROM. For unlocking you have to flash a new ROM.
Therefore download the Special Edition ROM
ftp://xda:[email protected]/Wallaby/ROM/Special/special_rom_1.2.exe.zip
Unzip the file, connect your device via ActiveSync to your PC and run the Exe file on your PC.
Than just folllow the instructions on the screen.....
Regards
Stefan
I have An HTC (PM2oo) device locked to T-Mobile. It has code on it and i need to do simunlock on it. please help me. I also have HTC 2125 for sim unlock. I copied XDA sinlock exe. into the phone and ran it in the phone but no success.
Well being the idiot that I am I didnt read into the Wizard much when i got mine (Tmobile-MDA) I have Cingular service. I wanted to use the phone and I Dl'ed Lokwiz ran it, it unlocked my phone with no problems, I am currently using it.
So did I just do a SIM unlock? Is there a way to tell if its still CID locked?
on my flash screen I get 2.26.0001 on both IPL and SPL.
I guess while I am at it, I am looking for a "non-branded" ROM that supports AD2P and that I can surf the web on Cingulars network, have MSN messenger
CID-unlocking is only possible through imei-check with a G4. Lokiwiz 0.3 only does a sim-unlock.
If you don't want to pay for CID-unlocking you can use a rom that works on a CID-locked device. There is a separate thread for this.
Don't mind me for asking it but I'm thinking of cid unlocking my mda vario, via the imeicheck site, but what is the benefit of doing so? And beside that, how can i check if my device is already cid unlocked? (before paying for it).
TheWizzard2203 said:
Don't mind me for asking it but I'm thinking of cid unlocking my mda vario, via the imeicheck site, but what is the benefit of doing so? And beside that, how can i check if my device is already cid unlocked? (before paying for it).
Click to expand...
Click to collapse
Well, some may go through the trouble to get a new ROM for their phone for various reason such as cooler customization or just getting rid of the customization on their phone. While, personally, I don't see much improvements on whatever ROM I used, hence I, myself tend not to use other ROM and install/remove the customizations myself.
Anyway, for CID unlock, I don't think there is an easy and safe way to do it. If you were to run some upgrade software (ROM flashing), it will fail. Some will fail with just a message, others will fail and brick your phone.
I unlocked mine too !!!
I have managed to unlock my G4 Cingular 8125 using Lockwiz 0.3 .
Thanks to machinagod and all the others !
Long live freeware and donationware
Hello , it great to know that I can unlocked the 8125-g4 (sim). I ma trying to change carriers. Wher can i get lockwiz 0.3, I wentto the ftp downloads i could not see it.
Can some one let me know ...Thanks
Berlow is what i found -but locwiz 0.3
FTP directory /Wizard/Unlock/ at ftp.xda-developers.com
To view this FTP site in Windows Explorer, click Page, and then click Open FTP Site in Windows Explorer.
--------------------------------------------------------------------------------
Up to higher level directory
02/27/2006 12:00AM 845,932 Lokiwiz02b.zip
02/27/2006 12:00AM 702 Unlock Ext Rom Wizard.cab
02/27/2006 12:00AM 979,229 aWizard-V1_1b.zip
02/27/2006 12:00AM 918,633 aWizard-V1_2beta2.zip
02/27/2006 12:00AM 984,244 aWizard-V1_3beta1.zip
02/27/2006 12:00AM 984,310 aWizard-V1_3beta2.zip
04/30/2006 12:00AM 920,308 aWizard-v1_2.zip
--------------------------------------------------------------------------------
THanks
well I found the locwiz 0.3, ran it and in a few minutes i had my cingular 8125 sim unlocked.
I am not sure if is ok to said that lokiwiz 0.3 works for SIm unlocking, but the gurus should let the other know.
Thanks a bunch to machinegod to creating the free software.
i need 8125 cingular simlock code
dakshithaw said:
I have managed to unlock my G4 Cingular 8125 using Lockwiz 0.3 .
Thanks to machinagod and all the others !
Long live freeware and donationware
Click to expand...
Click to collapse
this is my email address: [email protected]
I tried to unlock Hermes Orange SPV M3100 withe the latest unlocker v3a but couldn't unlock...After run auto unlock v3a, and run hermes unlock at the end, it says unlock successfuly but the phone still asks to enter unlocking code..i've been reading the hernes unlock threads but could find the solution to unlock it..this hermes has ipl 1.01 and spl 1.40 0ipro...anyone knows the way to unlock please help..thanks
sorry..problem solved, phone's unlocked...don't know what happened first but after hard reset phone, insert original sim and repeat procedure, phone is unlocked after that.
hi, i have the same problem. When i m flashing with Auto_unlock_3a_pof , i must insert original sim (orange) or no?
thanks
hi, I had the same problem. the unlocker went thru the procedure as successful, but was still locked to orange and asked for the code.
I had ran it without any sim.
after I did a hard reset and put in an orange sim, then ran it. it was ok.
unlocked. thanks.
you gotta give LOTS of details about your problem. there are literally hundreds of possibilities if you give us no details about what you did, what went wrong, during what stage... have u set up correctly, did you flash hardspl, was your battery full, did you read instructions well or just skim and jump ahead?
i hav same problem...."--------------------------------------------------------------------------------
I tried to unlock Hermes Orange SPV M3100 withe the latest unlocker v3a but couldn't unlock...After run auto unlock v3a, and run hermes unlock at the end, it says unlock successfuly but the phone still asks to enter unlocking code..i've been reading the hernes unlock threads but could find the solution to unlock it..this hermes has ipl 1.01 and spl 1.40 0ipro...anyone knows the way to unlock please help..thanks""" plz help me
Hi
Iam new to this site.
I had downloded HTC_Hermes_SIM_CID_Unlock_v3a and installed AUTO_Unlock_v3a. Now iam able to use new SIM.
But after puting a new SIM withing 10 seconds USIM message is coming. Friends kindly tell me how slove it.
HERM200
IPL-SSPL by Des
SPL-1.09.ds
Expecting your kind advice
sati
cnsathya said:
Hi
Iam new to this site.
I had downloded HTC_Hermes_SIM_CID_Unlock_v3a and installed AUTO_Unlock_v3a. Now iam able to use new SIM.
But after puting a new SIM withing 10 seconds USIM message is coming. Friends kindly tell me how slove it.
HERM200
IPL-SSPL by Des
SPL-1.09.ds
Expecting your kind advice
sati
Click to expand...
Click to collapse
Unfortunatly the Softbank hermes cannot be unlocked after a certain point:
pof said:
..It can be used in all HTC Hermes devices, no matter which bootloader version the device is running.
NOTE: For x01ht post April devices, see this thread....
Click to expand...
Click to collapse
pof said:
...This process is ONLY valid for new devices which have never turned on or let the SoftBank Extended ROM install.
If you have already let the ExtROM install you CAN'T sim-unlock it.
Click to expand...
Click to collapse
sounds like you have let the device install the ext_rom when you first turned it on, unfortunatly you cannot unlock it to use any sim card.
But you can do it with IMEI Check, you just cannot change radio version afterwards, but on newer version of X01HT it's 1.46 radio, so it's quite ok I think.
mrvanx said:
Unfortunatly the Softbank hermes cannot be unlocked after a certain point:
sounds like you have let the device install the ext_rom when you first turned it on, unfortunatly you cannot unlock it to use any sim card.
Click to expand...
Click to collapse
So if i upgrade to the latest radio rom,it still can't be solved??
how about if we change the EXtRom?
Success
My job done.
I have flash n unlock it.
With this JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe
see this link http://forum.xda-developers.com/showthread.php?t=281617&page=24&highlight=X01HT+rom+english+version
but make my cooking rom.(maybe u can say i just choice some part from the other rom)
i use NBHtool to make my own
1.extract JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe and HTC_Hermes_SIM_CID_Unlock_v3a (winrar)
2.decompile nbh file (HERMIMG_CDL_1.31.305.2_SHIP.nbh) and (HermesUnlocker_v3a.nbh)
3.Compile again but
IPL.nb; SPL.nd and RAdio rom use extracted from HermesUnlocker_v3a.nbh
4. PrimarySplash.nb ; SecondarySplash.nb ; windows(OS) i take the orginal JASJAM rom
5.ExtRom i take from extracted from the orginal rom (RUU_X01HT_1.33.761.4_1.14.00.10) ----> and this is my mistake.
I test with ExtRom from JASJAM ----> it work.great!
So i just take all except IPL.nb ; SPL.nb and Radio rom ---> extract from HermesUnlocker_v3a.nbh
After that the Compile file copy to folder that u extract JASJAM rom but delete the HERMIMG_CDL_1.31.305.2_SHIP.nbh file.
5.conect your softbank.
copy SSPL-HERM.exe to your Softbank then run it(from your PDA off course)
note : If screen USIM show always just reset it,after desktop show up,in 10 sec before USIM screen,open explorer then run it.
U'll see 3 color background (i think u know it)
6.flash it.
7.Just follow the instruction,but when it ask to choice an operator region,i just cancel it.(i did'nt tried if i choice it.i think i dont need it)
After that enjoy it.
but the problem is u cant use 3G
see the other thread to solve it.
hi... Learning.....
may i ask what ur x01ht was?
is it before april or post april?
I have this message coming up on a Japanese language version X01HT. I don't think it's been unlocked. Will these instructions work on my phone?
EDIT: I followed the instructions above on my phone, and they worked perfect!!! Thanks!
how can I tell if my phone is "post april"?
USIM Message GONE!!!!
Hello cnsathya,
Not sure if you still have the problem. I just got my x01ht Hermes yesterday and I worked on it today to unlock it. I used pof's (THANK YOU SOOOO MUCH) unlocker v3 but still USIM showed then later put my t-mobile sim and re-ran the unlock software but after 10 sec I still got the USIM message. I moved SB_USIM.cab to the phone and ran it before the USIM message came but nothing seemed to change. But I could then use my sim and receive calls so I flashed the PIMPING IS BACK v3 ROM by jasjammin and it now works perfectly and no more USIM. I had an old x01ht but cracked the screen so bought this one. Let me know if you need more information or have questions. Thank You,
Pr4tik
learnig said:
My job done.
I have flash n unlock it.
With this JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe
see this link http://forum.xda-developers.com/showthread.php?t=281617&page=24&highlight=X01HT+rom+english+version
but make my cooking rom.(maybe u can say i just choice some part from the other rom)
i use NBHtool to make my own
1.extract JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe and HTC_Hermes_SIM_CID_Unlock_v3a (winrar)
2.decompile nbh file (HERMIMG_CDL_1.31.305.2_SHIP.nbh) and (HermesUnlocker_v3a.nbh)
3.Compile again but
IPL.nb; SPL.nd and RAdio rom use extracted from HermesUnlocker_v3a.nbh
4. PrimarySplash.nb ; SecondarySplash.nb ; windows(OS) i take the orginal JASJAM rom
5.ExtRom i take from extracted from the orginal rom (RUU_X01HT_1.33.761.4_1.14.00.10) ----> and this is my mistake.
I test with ExtRom from JASJAM ----> it work.great!
So i just take all except IPL.nb ; SPL.nb and Radio rom ---> extract from HermesUnlocker_v3a.nbh
After that the Compile file copy to folder that u extract JASJAM rom but delete the HERMIMG_CDL_1.31.305.2_SHIP.nbh file.
5.conect your softbank.
copy SSPL-HERM.exe to your Softbank then run it(from your PDA off course)
note : If screen USIM show always just reset it,after desktop show up,in 10 sec before USIM screen,open explorer then run it.
U'll see 3 color background (i think u know it)
6.flash it.
7.Just follow the instruction,but when it ask to choice an operator region,i just cancel it.(i did'nt tried if i choice it.i think i dont need it)
After that enjoy it.
but the problem is u cant use 3G
see the other thread to solve it.
Click to expand...
Click to collapse
JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship .exe <<< the page can not be found... does anyone help to upload please...
Is it ?
http://rapidshare.com/files/17336753/JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship.exe
It was listed here http://mobi.pdafans.com/viewthread.php?tid=275408&extra=page=3&filter=type&typeid=178
bayupraya said:
JASJAM_wwe_1.31.305.2_1.31.305.104_1.21.31.10_ship .exe <<< the page can not be found... does anyone help to upload please...
Click to expand...
Click to collapse
This is a very old thread and I beg your pardon for bumping it, but I am looking for a thread which can help me solve my problem for like 15 hours now and this is the closest answer I got. My issue is similar to this, only mine is X05ht or the Touch Pro device. Similar Softbank carrier and yes similar USIM message issue.
Anyone can help me point to the right direction of solving my issue like the threadmaker solved hers/his on this thread? Please?
HTC xo1ht
Iam new to this site.
I had downloded HTC_Hermes_SIM_CID_Unlock_v3a and installed AUTO_Unlock_v3a. Now iam able to use new SIM.
But after puting a new SIM withing 10 seconds USIM message is coming. Friends kindly tell me how slove it.