Related
I downloaded A touchflo .cab and installed but nothing happened.
When i would try to launch it(from programs/touchflo) it would say that it was alrighty running
Any ideas
ok so touchflo is working in the sence of scrolling. But i dont see the main screen that displays big clock, and start menu.
maybe im mistaken on what that is. can someone help
Never played with touchflo, but for the big clock I think what you want is HTC home.
thanks thats main screen right
same thing happens to mine it says running but nothing happens how do i make it work?
try swiping your thumb from bottom to top on the touchscreen..
i just tried that but still nothing
Guys...
Touchflo is just the software to make the touchscreen touch-sensitive to scrolling like the HTC Touch. It is NOT HTC Home today plugin, HTC Cube, or any other software you may think it is. Therefore nothing will happen unless you're actually using software that allows you to scroll...i.e. PIE or a text editor or what have you.
For the clock and today screen plugin you want to get HTC Home.
For the cube you want either HTC Cube or Vistacube (there are others, but those are the main two)
If you install one of the cubes, it comes with Touchflo...so you can uninstall the Touchflo you've already installed and just install one of the cubes.
Thanks that helps me alot.
One more question.
Are those cubes complicated so set up ?
This is a little program I wrote to make our devices more gesture friendly. First If anyone wants to build on these mort scripts they are more than welcome to all I ask is give credit where credit is due
After you install the cab everything is in the my documents folder and at the moment it will not work in another folder but if this get popular then I might redue it for easy customization.
Directions:
First you have to go into your ftouchflo gesture settings and do as follows
Up-down: \My Documents\down.exe
Down-up: : \My Documents\up.exe
Left-right: : \My Documents\left.exe
Right-left: : \My Documents\right.exe
If you swipe your finger up the brightness will go up by one. Start from the bottom and swipe your finger to the middle of the screen. A little box should pop up and tell you what your new brightness level is. If you swipe your finger up and then swipe your finger from left to right the brightness with go to max. once its at max it will go back to what you had it if you do it again. For Brightness to go down you just do the opposite and for brightness to go all the way down just swipe your finger from top to the middle and then from right to the middle.
For the fun stuff:
If you just swipe your finger from left to right VJVJCandelaLite will come on to turn it off just hit ok or swipe your finger again.
If you swipe your finger from right to left the volume with go from mute to 100% or other way around
It gets better:
If you swipe your finger from bottom to middle then from right to middle it will link the audio to your BT headset to turn it off just do it again.
If you swipe your finger from top to middle then from left to middle you will activate wifi to turn it off just do it again.
NEED TO KNOW
Once you swipe your finger up or down you have 10sec to swipe your finger left or right after that it will go back to the default left and right app also in the cab I put the VJCandelaLite app in the my documents because I was not sure if everyone already has it.
I would have just provided a video but I did not feel you could see what was on the boxes popping up. I hope this is easy to understand if you don’t understand how this works I will post some kind of video. Hope everyone likes.
Up UP
nobody likes?
I have tried. But we all waits for the conifgurater
I see. I was only going to make that if it got popular. the way it is now i made it to suit my needs. and to be honest the conifgurater was going to be for stuff like the choosing the dir or switching around the gestures. but to make it do something different all together i would need to reprogram the scripts. But i will have lots of spare time over the summer since im not taking any classes so my goal is to get better at c# and learn how to program in win CE
Excellent work Irus. Just got a chance to try it and it fits my needs as well. Nice addon for the rom.
irus said:
Up UP
nobody likes?
Click to expand...
Click to collapse
Very well done irus, I love it. A "configurator' will be nice though.
I'll play with it some more and give some feedback later. I wish I was more of a techie to come up with cool stuff like this myself myself
problem is the rom doesnt have ftouchflo. it has htc's touchflo.
Pawel062 said:
problem is the rom doesnt have ftouchflo. it has htc's touchflo.
Click to expand...
Click to collapse
Powel,
Does the HTC touchflo retain the audio feedback when the screen is touched? I could not live with ftouchflo because of the absence of audio feedback,so I had never been willing to use it.
Well so far I love the phone eventhough it feels kind of weak. But I have some few questions on upgrading, usually im good with searching but i guess not this time. So im looking for a way to make things more finger friendly like menus etc, making them able to scroll instead of using a sylus and if possible using T9 on when not using the keyboard. What do you all suggest?
I just got mine too... I have sprint so I started with the Sprint wm6.1 update.
So far I've installed:
s2u2 (slide to unlock)
htc home plugin (you want this)
s2p (audio player)
s2v (picture viewer)
oxios memory
Look at my thread in this section called sprint mogul must haves, alot of good stuff was suggested there
the gullum diamond keyboards are awesome. i use the diamond keypad for T9 while i'm driving. its awesome. link below:
http://forum.xda-developers.com/showthread.php?t=392197
Great! Now how can I make the start and stuff like that more finger friendly?
So I installed the home customizer and now the screen flip is not at the bottom anymore but in the customizer but when I use it in the customizer it turns the screen the wrong way. What do i do?
Nevermind I did a hard reset. One last thing is when the slider is open do all yours have a movement in the slider when you tap on the screen?
Ok, Everybody heres a finished (to my comfort) dialer that as far as i can see works properly.
I'll say its working at 99.999 percent and as with all the other canvases, landscape is not perfect.
its primarily for manila 2.5 but can work with 2.1, its 2G so no video calling but does have conference and works preaty smooth.
just quit cprog (and phcanvga.exe if you have it), install and then soft reset.
Cab pyrorob_gullum_Phone_Canvas_Enhancement_2G_4_2_V2.cab
Package: pyrorob_gullum_Phone_Canvas_Enhancement_2G_4_2_V2.rar
for those with the energy rom, heres a theme to match: pyrorob PhoneCanvas 4.2 EnergyRom Theme.cab install after the main install, soft reset.
So, i do want to thank everyone here and those who donate there time with this. I really appreciate this and am thankful for everyones help.
short statement:
we are a community of people helping each other to better our devices and only a tiny fraction of all the users contribute.
its great when it happens and no one should expect accolades or payment for there creativity.
(dont get me started on people who will only release things on this site until they get paid, i think it stifles the advancement of the community as a whole).
Now, i do want to specifically thank amarullz, whose phcanvga.exe im using, which without it, would have seriously hampered this and gullum who has been absolutely helpful and all the testers.
Phone Canvases in testing:
pyrorob Phone_Canvas_Enhancement_2G_3_0_1916_3532_2_ERom_Theme.cab
manila 2.1 compatible,no curtain, energyrom theme and confrence calling
pyrorob PhoneCanvas_4_3_35776_01.cab
manila 2.1 compatible,no curtain, confrence calling,AT&T video share and AT&T ptt (push to talk).
Hi Pyrorob, Im sure many people here are like me and read your posts, use your fixes, but dont know how to mod dialers and whatnot, so cant really offer help or suggestions with the things you are asking. It doesnt mean your efforst aren't appreciated though!
Regarding your dialer, it would be helpful if you posted a screenshot so we know what we're getting. And also some confirmations that we can uninstall the cab and it will restore our previous dialer without any issues etc. It probably also pays to mention not to use SKTools as you said in the EnergyROM thread it can totally delete the phone canvas and you wont be able to get back the one prior to install
Out of interest just how DO you do something like this anyway? Im a computer programmer but dont know anything about working on the phones. Like what language is the dialer written in? Do you have access to the code and can make changes that way, or are you just trying to resize images and hex edit things inside resource files or exe/dlls etc (eg x and y offsets)?
Thanks pyrorob, I'll give it a whirl, and I'll be sure and post if I have any thoughts.
Okay, so I can't get it to install. Says "Installation was unsuccessful. The program or settign cannot be installed because it does not have sufficient system permissions." I used dotfred's taskmanager to kill cprog, and put the phone into airplane mode. Any ideas?
Cyfun said:
Okay, so I can't get it to install. Says "Installation was unsuccessful. The program or settign cannot be installed because it does not have sufficient system permissions." I used dotfred's taskmanager to kill cprog, and put the phone into airplane mode. Any ideas?
Click to expand...
Click to collapse
Also kill phcanvga.exe.
scarecrow420 said:
Hi Pyrorob, Im sure many people here are like me and read your posts, use your fixes, but dont know how to mod dialers and whatnot, so cant really offer help or suggestions with the things you are asking. It doesnt mean your efforst aren't appreciated though!
Regarding your dialer, it would be helpful if you posted a screenshot so we know what we're getting. And also some confirmations that we can uninstall the cab and it will restore our previous dialer without any issues etc. It probably also pays to mention not to use SKTools as you said in the EnergyROM thread it can totally delete the phone canvas and you wont be able to get back the one prior to install
Out of interest just how DO you do something like this anyway? Im a computer programmer but dont know anything about working on the phones. Like what language is the dialer written in? Do you have access to the code and can make changes that way, or are you just trying to resize images and hex edit things inside resource files or exe/dlls etc (eg x and y offsets)?
Click to expand...
Click to collapse
yes, i understand that, the only thing is, i didn't just open a thread and waited, i sent out a bunch of pm's to different people that i know knew the specifics of what to do and how to do it right and no one even had the decency to even reply. its like people think of this as some sort of competition..
yeah if you just follow the same steps to uninstall as you did to install then youll be fine. basically the dll's for the canvas have a bunch of positioning resources and thru lots of trial and error i managed to get things to where they are now.
I checked out your canvas on my Touch Pro.
The only think I noticed (except of the back button on the top right corner you mentioned) is that the left soft button "All People" does not work for me.
When I press it it changes from "All People" to "Contacts" and Manila crashes in the Background.
Any hints?
I have the same sig as above and dialer is working great! Only few bugs i see are what was mentioned already, especially with the all people left sofkey. Another is when you place a call the top taskbar is gone, small rezizing issue exactly the same as with rhodium dialer. If u hit keypad the taskbar comes back then tap call status to go back and the taskbar stays. Maybe get it to stay from the get go when you first make a call? All the features seem to work and landscape seems smoother then rhodium with it. Sorry cant help you with the technical side but always a happy beta tester. Just work out the few kinks, give it a makeover, good to go!!!
I have the same sig as above and dialer is working great! Only few bugs i see are what was mentioned already, especially with the all people left sofkey. Another is when you place a call the top taskbar is gone, small rezizing issue exactly the same as with rhodium dialer. If u hit keypad the taskbar comes back then tap call status to go back and the taskbar stays. Maybe get it to stay from the get go when you first make a call? All the features seem to work and landscape seems smoother then rhodium with it. Sorry cant help you with the technical side but always a happy beta tester. Just work out the few kinks, give it a makeover, good to go!!!
P.S.
One more thing. If you're in landscape already say writint a text message, then press the call button to bring up the dialer, the screen goes into portrait mode with the dialer while it should be in landscape. Then you have to close the hardware keyboard, reopen, now dialer is in landscape.
Bluetooth Volume???
Can anyone test this dialer with their bluetooth device? I dont have one handy right now. Just to make a call, try to adjust the volume up/down using the 2 hardkeys on the side of the phone to see if it works? I know on the rhodium dialer it doesnt change the actual volume on the headset, just shows on the volume volume is changing but does nothing. Hope its not the case with this dialer or can be fixed if it is? Thanks
deeznuts said:
I have the same sig as above and dialer is working great! Only few bugs i see are what was mentioned already, especially with the all people left sofkey. Another is when you place a call the top taskbar is gone, small rezizing issue exactly the same as with rhodium dialer. If u hit keypad the taskbar comes back then tap call status to go back and the taskbar stays. Maybe get it to stay from the get go when you first make a call? All the features seem to work and landscape seems smoother then rhodium with it. Sorry cant help you with the technical side but always a happy beta tester. Just work out the few kinks, give it a makeover, good to go!!!
P.S.
One more thing. If you're in landscape already say writint a text message, then press the call button to bring up the dialer, the screen goes into portrait mode with the dialer while it should be in landscape. Then you have to close the hardware keyboard, reopen, now dialer is in landscape.
Click to expand...
Click to collapse
deeznuts said:
Can anyone test this dialer with their bluetooth device? I dont have one handy right now. Just to make a call, try to adjust the volume up/down using the 2 hardkeys on the side of the phone to see if it works? I know on the rhodium dialer it doesnt change the actual volume on the headset, just shows on the volume volume is changing but does nothing. Hope its not the case with this dialer or can be fixed if it is? Thanks
Click to expand...
Click to collapse
ok first one, the all people soft key, im testing the dialer on a phone with manila 2.5 and when you hit that key it goes into the manila contacts, the dialer originally is from a manila 2.5 leo rom so it might only work 100% with a manila 2.5 rom..
the top taksbar has to do with the repositioning by the phcanvga if it doent move up the incall screen and cut off the top then the buttons at the bottom will be cut. sometimes the phcanvga doesn't reposition properly at first so you can do a few things like switch to landscape and back, goto contacts and back or close and reopen it and it will reposition itself.
yeah and it going back to portrait? well as far as i know there isnt a whole lot of landscape support with the leo since it doesn't have a hard keyboard so i guess thats the way htc programed this?..
second one, try putting in this reg key:
[HKEY_CURRENT_USER\ControlPanel\Volume]
"EnableAdjustHSVolume"=dword:00000001
see if that works
Apart from the 'back' key issue noted, no problems on my current ROM build. Have installed, unistalled and reinstalled without issue following Pyrorob's instructions. Conference calling working well (my mates like being part of the beta test!). Great job and Thanks!
pyrorob said:
ok first one, the all people soft key, im testing the dialer on a phone with manila 2.5 and when you hit that key it goes into the manila contacts, the dialer originally is from a manila 2.5 leo rom so it might only work 100% with a manila 2.5 rom..
the top taksbar has to do with the repositioning by the phcanvga if it doent move up the incall screen and cut off the top then the buttons at the bottom will be cut. sometimes the phcanvga doesn't reposition properly at first so you can do a few things like switch to landscape and back, goto contacts and back or close and reopen it and it will reposition itself.
yeah and it going back to portrait? well as far as i know there isnt a whole lot of landscape support with the leo since it doesn't have a hard keyboard so i guess thats the way htc programed this?..
second one, try putting in this reg key:
[HKEY_CURRENT_USER\ControlPanel\Volume]
"EnableAdjustHSVolume"=dword:00000001
see if that works
Click to expand...
Click to collapse
Oh i see, didnt know it was from a 2.5 version. That makes sense then. You think you can make a version to work with 2.1 manila though? I have no idea how hard that would be, just talking about getting the left softkey going for 2.1 manila. Ill have my jawbone 3 later today. Ill try it out of the box first to see if it works with the volume hardkeys on the phone, if that doesnt work then ill plug in the reg edit you provided. Still, this is the fastest port for a very nice vga dialer for our phones, WOW! Cant believe it took them forever to port tachi dialer and took u a few days and this one is wayyyyy better then tachi! Great work and would happily donate to you or wherever you would like me too for this and all your great work pyrorob, thank you!!!
Umm
Well out of the box the headset volume cannot be changed by the device with this dialer. I looked in the registry using the regular reg edit app thats cooked into nrg's rom and also tried using the one that came with sktools (which is more friendly i think!), neither have that entry.
I go to current user, control panel, volume, only entries here are all one worded, nothing like what you described and nothing with a standard setting of 0000001 or anything like that. Ill get a screen shot for u if that helps but looking in the reg i cant find it. Do i need to "add" the reg entry u described since its not there? If i do, how do i add it? Never done that before.
So far the only bug that I have found appart from the already mention ones, is a sliding bar on the right corner of the dialer when I open it up. The only way that i have found to make it disapear its by fliping the phone so the dialer goes to landscape and fliping it back to portrait and no more silder bar, and by closing the dialer with the end button instead of the x. Appart from that is working really great, so far no connecting delays ussing slide 2 answer. I'll be using it a couple of days more to test it out to see if anything else pops up. Hell, i like it so much i'll keep it until a new flash or a update from you pyrorob.
I think the only thing that needs its the energy theme.
Geat job man!
This dialer is like a God send to us, its soo good! Tested out the slide to answer/ignore and works flawless, no lag or sticking like rhodium! This is like an upgraded rhodium dialer for US users who dont have video call, its great. Love how theres no annoying bluetooth icon on the taskbar either when bluetooth is enabled with this dialer, huge plus for me! Hate having useless icons on the taskbar. Duh i know bluetooth is on cus i turned it on, why do i need an icon up there to remind me? If u can just make some finishing touches, skin the hell out of it to match energy rom, Golden, seriously golden here!!!
kmpoboy2 said:
So far the only bug that I have found appart from the already mention ones, is a sliding bar on the right corner of the dialer when I open it up. The only way that i have found to make it disapear its by fliping the phone so the dialer goes to landscape and fliping it back to portrait and no more silder bar, and by closing the dialer with the end button instead of the x. Appart from that is working really great, so far no connecting delays ussing slide 2 answer. I'll be using it a couple of days more to test it out to see if anything else pops up. Hell, i like it so much i'll keep it until a new flash or a update from you pyrorob.
I think the only thing that needs its the energy theme.
Geat job man!
Click to expand...
Click to collapse
What sliding bar is this? Are you talking about the top right corner wheres theres a grey box with a black arrow distorted pointing left? Thats the back button which would be nice if it can be skinned good or resized (looks fine in landscape as well as everything else, just not so much when receiving a call but no biggie!). Other then that, i have no idea what you're talking about? Can u provide a screen shot maybe?
deeznuts said:
What sliding bar is this? Are you talking about the top right corner wheres theres a grey box with a black arrow distorted pointing left? Thats the back button which would be nice if it can be skinned good or resized (looks fine in landscape as well as everything else, just not so much when receiving a call but no biggie!). Other then that, i have no idea what you're talking about? Can u provide a screen shot maybe?
Click to expand...
Click to collapse
No man, i know the back button, it's not that. It a sliding up/down bar, the one that appears whe you flip it to landscape. It appears when i close the dialer pressing the x button and open it up again with the send button and if i flip it to landscape when flip back to portrait the bar stays, have to flip it back to make it go away. Sory can't post screen shots I'm at work, plus don't know how to take a screen shot from the phone.
I made this program in answer to a request in the HD2 General forum, but thought I should post it here.
It's a small app that toggles the display orientation back and forth to the rotation of your choice, without the need for the g-sensor.
The default installation includes the settings screen (available from your start menu), and the application itself, which is available via a long-hold of the call button. When the application is first installed, it defaults to standard landscape (the left of the phone being the bottom), but this can be changed via the settings screen.
BIG THANKS!! to vonski and Eldorado9 for their patience and testing. Thanks guys
Have fun
Note:
Manila doesn't like being forced into landscape, so you can't use this app for that - sorry. It works upside-down, just not sideways. (I've got a HD2 with Sense/Manila 2.5)
Also, I've only tested this on a WVGA device and would like to know how it works on other resolution devices, so please feel free to private message me with any feedback regarding this.
Change details (26/01/2010)
Removed the long_send link that was originally being installed in the Windows folder.
For some reason, when you press the call button to answer a call, it executes the long_send link, despite only being a quick send.
This only happens when there's an incoming call. I've removed this link from the installer, but you still execute the toggle with a long-hold of the call button.
NOTE: The installer will remove the long_send link from your windows folder.
Change details (13/01/2010)
Added the settings screen so there's now only 1 installer, instead of 3.
If you do have the previous version, you can simply delete it from the windows folder, or just leave it and install this one.
It will override the existing version's functionality, despite being able to install it on your storage card now.
Great Job!
John,
Great job and thanks for this. First thing that comes to mind is why did you not combine these into one programme so one can have the option to go left, right or upside down without having to install 3 separate apps?
If its not difficult to do and you can spare the time to do it then I would be very interested in a single combined app that I could run off my quicklinks.
I'm subscribing to this thread to watch developments.
Thanks again.
WB
wacky.banana said:
John,
Great job and thanks for this. First thing that comes to mind is why did you not combine these into one programme so one can have the option to go left, right or upside down without having to install 3 separate apps?
If its not difficult to do and you can spare the time to do it then I would be very interested in a single combined app that I could run off my quicklinks.
I'm subscribing to this thread to watch developments.
Thanks again.
WB
Click to expand...
Click to collapse
It actually is 1 program, but the shortcut (long_send) is different in each zip file, and that tells the app which direction to rotate the display.
This started because someone asked for an app that would put their display in landscape and then back again, with a long-hold on the call button. After I'd done that for them, someone else asked for the opposite direction. Whilst doing that I remember that someone had once asked how to change the display to upside-down, so I did that at the same time.
The main idea here is that you pick a default rotation, and then you only have a button press to toggle it on and off. Anything more than that would require a UI and therefore more interaction, and since I'm trying to keep interaction to a minimum, that sort of goes against the principle of it.
I'll have a think about it though, but I think what you're suggesting is a completely different application. I'm not against doing that, but it won't be part of the development of this.
Thanks for the suggestion mate
Ah ok, I see. Also understand the "minimalist" philosophy behind the development.
The way I would use a programme like this would be to have it as a quicklink on my front screen (I tend not to link things to hardware buttons) which would then give me the options of (L)eft, (R)ight or (U)pside Down. If that requires a UI (I guess it does) then don't go to all that trouble.
The problem with me is I don't always rotate my device the same way all the time (I'm weird like that) although upside down is a new one on me (I remember Tubgirl, I think, asking for that).
Cheers anyway.
WB
Very nice....it's much more convenient than using BSBTweaks and shaking it... Thanks!
Just a quick question:
I use the Standard Windows Hardware Button Assignment and mapped my internet browser button with "rotate Screen"...
now here for the question: Is it possible to write that app for other buttons too? 'cause i'd love to have multifunction on my browser button and your app is almost perfect for it^^ short press = Opera, long hold = rotate... that would be SO AWESOME!!!!
btw: your app is great as it is now.... it's just a question^^
strange_nu_kid said:
Just a quick question:
I use the Standard Windows Hardware Button Assignment and mapped my internet browser button with "rotate Screen"...
now here for the question: Is it possible to write that app for other buttons too? 'cause i'd love to have multifunction on my browser button and your app is almost perfect for it^^ short press = Opera, long hold = rotate... that would be SO AWESOME!!!!
btw: your app is great as it is now.... it's just a question^^
Click to expand...
Click to collapse
Thanks for the comment
I think to do what you've suggested, you'd need something like AEButtons. I've never used it myself, but I believe you can assign different actions for long and short button presses to hardware buttons.
Hope this helps
Thanks thanks thank you very much
another key assignement
is it possible to assignt the exe not to long send button but to windows start button (u know that one in the middle in htc leo-next to home button)
tnx in advance.
karaern said:
is it possible to assignt the exe not to long send button but to windows start button (u know that one in the middle in htc leo-next to home button)
tnx in advance.
Click to expand...
Click to collapse
You'll need to look at other software for that. Try AEButtons. It's not something I use myself, but I believe it will do what you want.
tnx for the fast replay...actually i started to use that toggle and it works fine with long press key.
eve bsb tweek cant rotate application screen on LEO but that toggle does it.
tnx
karaern said:
tnx for the fast replay...actually i started to use that toggle and it works fine with long press key.
eve bsb tweek cant rotate application screen on LEO but that toggle does it.
tnx
Click to expand...
Click to collapse
Glad it's helped mate.
Version 2 will be coming soon, with a settings screen where you can select an orientation, rather than having 3 different downloads.
Thank you vry much.
thanks man!!
Thanks
Many thanks for this, a very useful app
wacky.banana said:
First thing that comes to mind is why did you not combine these into one programme so one can have the option to go left, right or upside down without having to install 3 separate apps?
Click to expand...
Click to collapse
I never liked it the way it was, so I've done some work to give you a UI so you can select a rotation style for the application.
Hope this is better for you
johncmolyneux said:
I never liked it the way it was, so I've done some work to give you a UI so you can select a rotation style for the application.
Hope this is better for you
Click to expand...
Click to collapse
John,
In the language of the streets, "yo da man!"
Just downloaded and will give it a try in a minute. Sounds like just what the doctor ordered.
Cheers again.
WB
PS: Does this mean that our request has given you a chance to hone your UI skills then (lol)?
wacky.banana said:
Does this mean that our request has given you a chance to hone your UI skills then (lol)?
Click to expand...
Click to collapse
Heh - They're far from honed! If it were a windows (PC) app I was building, I'd have no problems. I'm pretty nifty around windows on a PC, but mobile dev is pretty new to me, so I'm just picking it up as I go along. It's always good to find someone asking for something that makes me think "I could do that!"
Cheers for the comments mate - hope you like the new version
Just perfect on my Touch Diamond!!!! Thanks
Towserspvm2000 said:
Just perfect on my Touch Diamond!!!! Thanks
Click to expand...
Click to collapse
Thanks for the comment mate - nice to know it's working well on a different resolution.