Upgraded Verizon xv6800, now it's on Sprints Network - Mogul, XV6800 ROM Development

I seem to have the Sprint 3.16 Rom. But I do have the 3.27 Radio and even though I load the DCD 2.2.6 (verizon version) the phone ends up on the Sprint network.
I followed the directions based on this link http://forum.ppcgeeks.com/showthread.php?t=17667
and part of that includes:
4. Run the Unofficial carrier released rom 3.16 (this has the radio also)
>>>Click here for Sprint unofficial 3.16 Release
>>>This has the correct radio as well --that is why I recommend going this route first
**Special Note: Do not be concerned if you hear and see your phone reboot
and disconnect from your computer. This will happen multiple times as it
loads the 3.16. This process can take about 10mins or so to complete.
**Further Explanation: The reason for this step is to easily and safely get you
into the 3.16 real with the correct radio installed. Don't be concerned if you are on
another provider. You will take care of that when you download a custom rom
built specifically for your provider network.
This all seemd to work, but has left me on Sprints network.
What did I do wrong, or more importantly, how do I get the phone back onto Verizon's network?
Thanks Much. It's not a brick, but it's not real usefull right now.

I'd reflash.
Are you sure it's on Sprints' network and not that it just says "sprint" when dialing out?

You are not on Sprint, or shouldn't be. Open your web browser on your phone and go to www.showmyip.com. Scroll down to the paragraph where it states "Your currently assigned host name is..." and you should see Verizon in there somewhere. Mine shows Sprint, but I am with Sprint.
You can always change what the connection name is by going to Start, Settings, Connections, Connections and clicking Manage existing connections. Then select the Sprint name, click Edit and name it whatever you like. This will have no impact on your connection other than the name that pops up when connecting to the Internet.

No, it's Sprint all right
If I try to make a phone call, I get a message about an authentication problem that says to call Sprint, etc.

what happens when u try doing *228???
idk if you can find the latest prl file but i'd update that as it contains the tower lists
i use to get "Welcome to Verizon Wireless" messeges when i had US Cellular...and from wat i understood was that there was a mixup in the prl lists of tower codes etc

How do I apply a PRL list?
Sorry, I managed to find one. How do I apply it?

##PRL#...and it will ask for your msl...urs should be 000000 (thats wat i believe verizon has them set as)
browse to that file and it should load

Thanks, things are getting better now
Thanks to everyone for their kind help.
Just thought I would fill folks in on where I went wrong in case it's helpful to someone else.
First I missed a step in the direction when I was upgrading.
I skipped Step 5, to run the unlocker. I guess I thought that it was not necessary since the 3.16 Sprint Rom already included the 2.40 SPL. Anyway, once I ran the unlocker, it droped my SPL back to something like 1.20, but that version allowed me to run the 'new' 2.40 SPL, and once I had that, I could load the Radio.
That got me back to a kosher setup, but I was still on Verizon's network.
While I was waiting to understand how to load a PRL, I figured out that my phone was set to Automatic Roaming, and given that I am in a poor phone coverage area, my phone had roamed over to sprints network. Changing the Roaming setting to Automatic-A got me back on Verizon's network.
I still have authentication problems, but after doing a bit more searching, I think I need to call Verizon to clear that up. Once that's set, I think a *228 will get me the proper PRL.
So, While I don't have a working phone quite yet, I think I'm only minutes away from that.
Thanks again.

Got it working
Turns out I was not minutes away, I was hours.
I'll give the short version here.
The Sprint ROM that I had loaded left my EPST a complete mess. Reloading the stock verizon ROM fixed that (link below) then redoing the *228 worked, and then VZW could generate a A-Key for me and do some unspecified magic to get my internet access working.
Key thing appears to be to reload the Verzion ROM to reset the radio/EPST settings
Link to ROM is here
http://forum.xda-developers.com/showthread.php?t=359659&page=2

Related

What is the latest Sprint PRL?

I upgraded my from 60610 to 60611 and my data rates dropped down from about 800k to 300k. Is there a later release or should I go back to 60610?
60611 seems to have issues, I went back to 60610. Technically the PRL shouldn't have any effect other than you might have lost a tower and now it's utilizing another but with Sprint you never know
You can view and try a selection of PRL's from here: http://www.corolada.com/prl/
how does one manually upgrade/change the PRL?
Would someone please shed a lite on this topic. Alot of us do not even know what a PRL is and why changing it might be benificial.
stevenewjersey said:
Would someone please shed a lite on this topic. Alot of us do not even know what a PRL is and why changing it might be benificial.
Click to expand...
Click to collapse
a PRL is a list of roaming information and for evdo users it lists all the evdo towers also.
to manually update your prl, type ##prl# on the phones keypad, enter MSL, browse to the msl file.
I haven't had any issues with 60611, I didn't notice anything different after I flashed 3.16, I just assumed I had better update the PRL to avoid some of the roaming problems people had. When I do throughput tests I'm in to the 1Mb down range and 300-500 up.
Looks like there is a new PRL 60711...
http://www.corolada.com/prl/sprint/60711.prl
my phone asks for an unlock code when i type in ##prl# how do i get this code?
Try code 000000.
I am not sure if Dcd's rom includes it but no2chem's rom has the EPST (program to edit/view settings without *775) located within the \windows dir from which you can manually load the prl. You have to save the prl to your phone and then load by browsing to the file's location.
johnnychimpo said:
my phone asks for an unlock code when i type in ##prl# how do i get this code?
Click to expand...
Click to collapse
Thats where you enter you MSL. You can call customer service and ask for it. They asked me what I wanted it for and I told them I was going keep it for my records. I wouldn tell them too much.
Someone made a cab file that extracts the msl code. Used it when i switched to no2chems rom
I updated to 60611 after loading the new 3.16 ROM. I just updated to 60711 after seeing dalvarez7's post. Seems to work fine when I force the phone to roam.

Alltel HTC PPC 6800 ROM **where are the experts??**

I have Alltel and have been trying NexVision's ROM, the DCD and and and, pretty much everything I could find.
Running the 3.27.00 Radio ROM and tried a lot of ROMS of the WM 6.1 ones
I cant get any of them working right!!
I dont seem to get any success after flashing connecting to the Internet and also constantly have the roaming indicator on (that triangle on the top).
Also it changed my MSC/SPC or whatever you call it from 000000 to something else which makes it impossible for me to use the *228 to update roaming and PRL via their automated telephone thing.
Now my question is,
which is the best working ROM for the Titan on alltel? Especially how do I get the thing to connect to the Internet again???
how do I get the Titan connected to QPST in order for me to change the SPC back to 000000?????
I appreciate any help, this forum is so helpful and such great work you guys!!!!!
keep it up!!!!
jamesfelarca said:
I have Alltel and have been trying NexVision's ROM, the DCD and and and, pretty much everything I could find.
Running the 3.27.00 Radio ROM and tried a lot of ROMS of the WM 6.1 ones
I cant get any of them working right!!
I dont seem to get any success after flashing connecting to the Internet and also constantly have the roaming indicator on (that triangle on the top).
Also it changed my MSC/SPC or whatever you call it from 000000 to something else which makes it impossible for me to use the *228 to update roaming and PRL via their automated telephone thing.
Now my question is,
which is the best working ROM for the Titan on alltel? Especially how do I get the thing to connect to the Internet again???
how do I get the Titan connected to QPST in order for me to change the SPC back to 000000?????
I appreciate any help, this forum is so helpful and such great work you guys!!!!!
keep it up!!!!
Click to expand...
Click to collapse
It sounds like you let the Sprint customizations run. Sound about right?
Here's what I had to do after the Sprint customizations locked me out of the PST:
Geckotek said:
I flashed back to the stock VZW ROM (third time I think), I made sure all of my provisioning issues with Verizon were worked out (finally had the tech "kick the switch").
1) Then I proceeded to load the 2.4 bootloader,
2) then the 3.16 Unauthorized Sprint ROM w/ radio,
3) then finally installed a cooked DCD 2.3.2 ROM.
Things to note:
1) I never let the Sprint ROM boot up
2) I had no signal so ran *22802 then hit End as soon as it connected
3) Still no signal after reboot
4) No A key, MSID, or MDN issues, but I did re-enter the MSID and MDN as discussed in other threads
5) After re-entering MSID and MDN then after reboot I had signal
6) never had to run *228 to OTA program (in the past programming with *228 has reversed the effect of re-entering the MSID and MDN)
In general, I feel that the OTA from VZW sends down some programming that conflicts with the 3.27 radio...but I have nothing to prove that.
GPS is running great (I just loaded the AstroGPSLauncher)
Not sure about Rev A. It does seem snappy. What's a good site to test from the phone?
I'm happy and not re-flashing until a solid radio for Verizon arrives.
Click to expand...
Click to collapse
that all worked for you on Verozon, but I got alltel!!!
i still want to know how to change my MSC SPC, the Master Code back to 000000
and also what would you recommend is the best ROM that works for ALLTEL and also has the internet working.
I did all the MSID and MSN entering by hand.
I do get service for text messaging and Phone service as well.
i cannot get access to the internet, and also am constantly roaming. thats my issues
I have Alltel and DCD's 1.7.x ROMS are GREAT! No GPS but I don't need it.
you have a link to the ROMs??
jamesfelarca said:
you have a link to the ROMs??
Click to expand...
Click to collapse
I have Alltel PPC6800 and I am running Radio 3.27 and DCD2.3.2 just fine. Download the kitchen and run it. Alfter everything is installed then dial the *228 and pick option 3 for new phone. That will update all the settings you need.
Here is all the stuff you need. Pick which alltel rom you want. I know they all work good, some have more features.
http://forum.xda-developers.com/showthread.php?t=369920
jamesfelarca:To change the PRL you can put ##775 in the dial pad and send. Then enter the 000000 for the unlock code and select update PRL ->Menu->Edit and select the current PRL (probably a good idea to have this on your memory card) http://www.corolada.com/prl/ The one you want is 30031. Also you may want to do the ##778 unlock code 000000 and then check the NAM settings MDN and MSID should be your 10 digit number.
jamesfelarca said:
that all worked for you on Verozon, but I got alltel!!!
i still want to know how to change my MSC SPC, the Master Code back to 000000
and also what would you recommend is the best ROM that works for ALLTEL and also has the internet working.
I did all the MSID and MSN entering by hand.
I do get service for text messaging and Phone service as well.
i cannot get access to the internet, and also am constantly roaming. thats my issues
Click to expand...
Click to collapse
A) What my instructions help with is flashing a Sprint ROM to a non-Sprint phone
B) My instructions show you the only way I've ever seen how to remove the MSL from the phone.
So if you want your phone to work correctly, I suggest you give it a try. Your mistake was letting the Sprint customizations run....as far as I know, that is not easily reversible.
dwertz said:
I have Alltel PPC6800 and I am running Radio 3.27 and DCD2.3.2 just fine. Download the kitchen and run it. Alfter everything is installed then dial the *228 and pick option 3 for new phone. That will update all the settings you need.
Here is all the stuff you need. Pick which alltel rom you want. I know they all work good, some have more features.
http://forum.xda-developers.com/showthread.php?t=369920
Click to expand...
Click to collapse
Based on my experience, reflashing the ROM doesn't remove the MSL lock applied by the Sprint ROM. That's why I reverted to the stock bootloader and ROM/Radio.
dwertz said:
I have Alltel PPC6800 and I am running Radio 3.27 and DCD2.3.2 just fine.
Click to expand...
Click to collapse
Glad it works for you. I had problems with the radio. I was only receiving about 2/3 of sent SMS and OfficeSync did not update properly.
Here is a link to DCD's 1.7.0 here: http://forum.xda-developers.com/showthread.php?t=372853
I used the kitchen and it works very well for me.
i have alltel and update my ppc6800 fine all i had to do to remove the indicator icon was to do *228 option 3 wich is activate.
jamesfelarca said:
that all worked for you on Verozon, but I got alltel!!!
i still want to know how to change my MSC SPC, the Master Code back to 000000
and also what would you recommend is the best ROM that works for ALLTEL and also has the internet working.
I did all the MSID and MSN entering by hand.
I do get service for text messaging and Phone service as well.
i cannot get access to the internet, and also am constantly roaming. thats my issues
Click to expand...
Click to collapse
I'm not sure how to change the MCL back to 000000 but if you haven't already you should be able to use GetSPC to obtain the code for your device. Once you're in EPST check your Home SID to make sure this is correct. If not there's a good chance you'll be roaming all the time. Also make sure you have the newest PRL (*228 Option 2)
For your internet connection, check EPST Security and M.IP Default Profile and make sure your NAI and UserIDs are set to your phone number @alltel.net and your AAA shared secret and PPP Password should be "alltel" without the ". Your HDR AN AUTH Password should be your ESN (Hex).
I recommend dcd 2.32 also. It's what I'm using and it's working great.
Sounds like everyone else covered the how to's... but before you try anything else you might want to wait for DCD's new kitchen which will work with the official radio released for Sprint today.
Roaming Order
Does anyone know if there is a way to change the order of carriers my phone tries to roam to?
I have Alltel and apparently Sprint is at the top of there list. I live in an area where Sprint service sucks and there is no EVDO, but the Sprint tower is just close enough to be seen so I never get onto the Verizon Towers. I would like to set my Roaming order to be Verizon first then Sprint etc...
Thanks,
mr.ellsworth

I'm stuck in boot screen (updating ROM)

I've since solved my boot screen issue. I've installed :
dcd 3.2.5
Titan_Radio_ROM_3.42.30
dcd USCC Carrier 20080801
I have no data connection, I deleted it says my username and password are incorrect. I've tried every combination of my 10digit number and uss.net that I can think of. I've also reinstalled the uscc carrier cab, did the *228 and a soft reset. I can connect for 2 kilobyts then after that I can't connect. I'm not finding much on these forums to help me out. Does anyone have any ideas?
additional info
Sorry, the phone is a USCC 6800
hey just to let you know I have the 6900 and I dial #777 not sure if u wanna try that
I've had the same problem everytime I change ROMS. I have Verizon and found after I've "activated" the phone using the *228 then option 1, I then do *228 and option 2 (update my roaming capabilitys). That has always enabled my data connection.
kmanuel74 said:
I've had the same problem everytime I change ROMS. I have Verizon and found after I've "activated" the phone using the *228 then option 1, I then do *228 and option 2 (update my roaming capabilitys). That has always enabled my data connection.
Click to expand...
Click to collapse
If that doesnt work and you have an old cell phone around you can swap the ESN's on VZW's web site under customer service. When you do this you reset all the security information for the handset. I find this way to be the quickest method that has never failed. I use it so much I have the other ESN almost memorized!~
Scott
k3an said:
I've since solved my boot screen issue. I've installed :
dcd 3.2.5
Titan_Radio_ROM_3.42.30
dcd USCC Carrier 20080801
I have no data connection, I deleted it says my username and password are incorrect. I've tried every combination of my 10digit number and uss.net that I can think of. I've also reinstalled the uscc carrier cab, did the *228 and a soft reset. I can connect for 2 kilobyts then after that I can't connect. I'm not finding much on these forums to help me out. Does anyone have any ideas?
Click to expand...
Click to collapse
Run EPST and make sure that your PPP user name and password in there are correct.
If you didn't back up your phone's programming with QPST before and after flashing there is a chance that your EPST information is corrupt which would cause data to not work.
You will need your SPC/MSL in order to access EPST. You can try 000000 if nothing else works, and if it is 000000, you will need to set it back to the correct SPC/MSL otherwise *228 won't properly update your phone. Also USCC doesn't offer an option 1 or 2 after dialing *228, they don't have an OTA reprogramming of their phone.
If those changes don't work, you can try posting your entire EPST on here (removing any personal info, i.e. phone #, ESN, etc) and one of us USCC folks can compare it to ours and let you know what other areas look corrupt.
This is the one downside to USCC customers, we have to take extra steps while programming our phones to get them up and running, luckily it's a one time thing, once the phone is flashed the first time, these settings stick.
BTC

[Q] Flashed Eris For Cricket, Reverted to Verizon, No 3g :(

So I bought a phone (Eris) off Craigslist to flash it to Cricket. I was able to get all the settings right in order to have MMS\3g using EPST and enjoyed it for a while. Unfortunately, I recently moved to a town that does not have Cricket in it, so I installed a new rom and was able to Activate my phone with Verizon. Unfortunately, I have been unable to access 3g on the Verizon network and was wondering if anyone could post the correct settings to use with epst in order to get 3g working.
Please, I have searched for them but am either using the wrong search term or just cant find a thread that has the settings I need.
I am currently using KaosFroyo V32 but by the time anyone reads this I will have reverted to a rom which allows me to use EPST.
Thanks,
Q
So I switched over to the Xtrsenserom and, just as I thought, the settings in EPST are all still setup for cricket service.
Im going to try #228 and see what happens now that Im not on a Froyo-based Rom anymore
Peace...
AAARrrgggghhh!!!
This so sucks!! The ota did not change the settings (or at least not enough to allow mobile internet) It was so easy to find the settings i needed to change in order to have mobile internet through Cricket. Why is it so hard to find the ones to revert back? Under the NAM Name it still says cricket but my MDN is correct but I can tell a bunch of the numbers in subsequent settings are connected to my old Cricket account... Please help!!
It's *228 for one. Which page in EPST do you need?
Ah I figured it out. It had my old number as min and crickets info for login and a few other abnormalities resulting from cricket. I gotta say this version of Android 2.1 I reverted to in order to access EPST is real nice. I don't think im going back to Froyo for a while. I forgot how nice the dialpad is where you can just dial in part of someones name and all the numbers that fit your input start appearing
can you send me the settings you used in EPST for verizon. I think I may be having similar issues.
Use the verizon RUU.
This will put everything back, you can *228, reroot, then restore your nand backup and uninstall auto start.
Sent from my Eris using XDA App
You know what, just throw a verizon prl file in there, and you should be able to *228.
Try that alltel verizon hybrids one if you can't find any others.
Sent from my Eris using XDA App
I'm sorry to bring this thread back up.
I just went through 3 days of frustration on this issue and since this thread is the top google result, I want to help others.
I bought a used Droid Incredible that was flashed to Cricket. We had the phone flashed back to Verizon from a local Cricket dealer. However, my data wasn't working at all. After spending 2 hours on the phone with VZW, I learned of ##778. The rep only went through two menus and only one option was different (home nid/sid). It didn't help changing it, and in fact, everytime I do *228, it just goes back to what was in there originally. So anyway...I found the security menu later that night. Noticed that HDR AN AUTH Password and PPP Password said 'cricket'. I deleted that, reboot, and then saw 1x finally pop up, but it wouldn't stick.
Changing PPP Password to vzw made 1x work, but the connection would constantly try to obtain 3g, and reset the connection so it was still unusable for the most part.
Noticed on the Eris (previous phone), those Password values were encrypted...Google research suggested a painful adventure of memory dumps, etc, etc.
Then I found another post.
http://forum.xda-developers.com/showpost.php?p=2563813&postcount=32
I blanked out the two password fields, committed, then went to home sid settings (or home sid profile) and changed network type from simple ip mode to mobile ip preferred. Commit, reboot and bam! 3G was there!. I didn't have to, but a *228 may be necessary. The two password fields got updated automagically and now have encrypted values in them. Life is good.
Edit: just wanted to state that in the middle of trying to get data working, I flashed over the verizon RUU, which didn't help immediately, but may have been a compounding solution.

No 3G on Boost

Hey guys,
I've been searching all over the tubes/threads and can't find a legit answer.
I have an EVO OG on Boost. Working 3G.
I have done all the standard steps in flashing the info over to the LTE.
I am able to get text/talk, but no 3G.
Specs:
S-ON
1.15 hboot
1.05.11.0606 radio
Donor: Evo OG > TP2
All keys, msl, important numbers acquired.
Flashed talk/text
I have QPST, QXDM, DFS 4.0.0.3, CDMA 2.7
There must be some step to flashing LTE phones. I've seen the SGSIII thread and the only different steps there are the PAP name ([email protected]), and I've seen members mentions 466_1 nams, and checking certain parameters and unchecking others, and none of it works.
Profile update gets error code 1233 so I can't even try that.
I'm at my wits end with this phone. I'd get CDMAWS3.8.7 if I knew for sure it'll get my 3G working. But others have got it without the software. What's missing from the standard incog/donor to EVO OG steps? Help guys.
YES
Alright! Got it working!
IDK about anyone else, but here's exactly what I did. I pray it helps at least one other out there!!
I was on hboot 1.15, custom rom, rooted, unlocked BLer, the works.
I flashed to Boost the EvoOG way. Got talk and text, no data working. Error 67/no 3G signal on Profile 1 (on prof 0 there was a 3g signal, but no connection)
Update Profile was the ONLY method I could not attempt because of Error 1233.
*Error 1233: Turns out this is some sort of connection issue between phone and sprint servers from what I gather. Some said it had to do with root, but I unrooted and still had this issue. Others said it was HTC specific. More on this later...
So to update profile, I decided to go ALL the way back to Stock.
Unrooted.
Relocked via ADB (fastboot oem lock)
DL'd stock Jewel Rom (unfortunately, put me up to 1.19 hboot from 1.15. No other RUU worked -- all said bootloader error except for this one, so I just went with this one.)
Once that was done, I tried updating Profile on my fresh phone.
Error 1233.
I reflashed Nams and Profile data and NV items.
Error 1233 on profile update. No 3G.
I did ##768#, reset everything. I was going to attempt to do another clean flash of Nams etc...
Phone reset information.
Here's the good part:
On android attempting Hands Free Activation, it failed. It then said "If you are not with rep, press activate", bringing up the hands free self-service screen. It failed, saying no connection, bla bla.
I went to standard android setup, and here's what I think did the trick:
-I made an HTC Account on the spot
-I connected to WiFi when directed
-Left location services on
Once done, it tried to activate AGAIN, and said "If you are not with rep, press actiavte"
Brings up the self-service screen, and for some magical reason,
It validated my account, showed my boost number, and now I've got talk, text, web on my Evo LTE on Boostmobile.
Went online, dled apps, checked ##debug#, and EVDOrevA for true 3G.
I strongly believe HTC account setup is what allowed the phone to bypass Error 1233. Or not. But it's the one variable that changed of my MANY tries. Perhaps having an HTC account allows the phone to use that HTC update profile service? In the description of the account setup it said "and allows you to connect to HTC software updates...", and I lumped this with update PRL firmware, profile, and HTC update, so I went and made an account via wifi.
Well! That's it! Hope it helps. Maybe someone can make more sense of it.
Special thanks to "iBlowpot" for giving some tips, albeit they didn't work, it's nice that at least one person tried to help.
I can confirm this is wierd but worked for me on 2 evo lte make sure it is on cdma only no lte thought. Great job
Alvaster said:
Alright! Got it working!
IDK about anyone else, but here's exactly what I did. I pray it helps at least one other out there!!
I was on hboot 1.15, custom rom, rooted, unlocked BLer, the works.
I flashed to Boost the EvoOG way. Got talk and text, no data working. Error 67/no 3G signal on Profile 1 (on prof 0 there was a 3g signal, but no connection)
Update Profile was the ONLY method I could not attempt because of Error 1233.
*Error 1233: Turns out this is some sort of connection issue between phone and sprint servers from what I gather. Some said it had to do with root, but I unrooted and still had this issue. Others said it was HTC specific. More on this later...
So to update profile, I decided to go ALL the way back to Stock.
Unrooted.
Relocked via ADB (fastboot oem lock)
DL'd stock Jewel Rom (unfortunately, put me up to 1.19 hboot from 1.15. No other RUU worked -- all said bootloader error except for this one, so I just went with this one.)
Once that was done, I tried updating Profile on my fresh phone.
Error 1233.
I reflashed Nams and Profile data and NV items.
Error 1233 on profile update. No 3G.
I did ##768#, reset everything. I was going to attempt to do another clean flash of Nams etc...
Phone reset information.
Here's the good part:
On android attempting Hands Free Activation, it failed. It then said "If you are not with rep, press activate", bringing up the hands free self-service screen. It failed, saying no connection, bla bla.
I went to standard android setup, and here's what I think did the trick:
-I made an HTC Account on the spot
-I connected to WiFi when directed
-Left location services on
Once done, it tried to activate AGAIN, and said "If you are not with rep, press actiavte"
Brings up the self-service screen, and for some magical reason,
It validated my account, showed my boost number, and now I've got talk, text, web on my Evo LTE on Boostmobile.
Went online, dled apps, checked ##debug#, and EVDOrevA for true 3G.
I strongly believe HTC account setup is what allowed the phone to bypass Error 1233. Or not. But it's the one variable that changed of my MANY tries. Perhaps having an HTC account allows the phone to use that HTC update profile service? In the description of the account setup it said "and allows you to connect to HTC software updates...", and I lumped this with update PRL firmware, profile, and HTC update, so I went and made an account via wifi.
Well! That's it! Hope it helps. Maybe someone can make more sense of it.
Special thanks to "iBlowpot" for giving some tips, albeit they didn't work, it's nice that at least one person tried to help.
Click to expand...
Click to collapse
rx7mike said:
I can confirm this is wierd but worked for me on 2 evo lte make sure it is on cdma only no lte thought. Great job
Click to expand...
Click to collapse
Real glad to hear that. And yes, CDMA only or CDMA HDR only must be selected under ##data#.
rx7mike said:
I can confirm this is wierd but worked for me on 2 evo lte make sure it is on cdma only no lte thought. Great job
Click to expand...
Click to collapse
Im getting the error 16 message too. everything is swiched over meid esn it even displays boost but no 3g i cant make calls or send texts, but if someone calls me it rings then hangs up. ive done what you said but when i reboot to go through the andriod setup it doesnt ask me to setup an htc account. i wondering how to go about that. Also, when i go to ##786# and reset everything and reboot the hands free activation actually activates, but when i get into the phone sprint is displayed again. im so close i can tast it and i know its something small. any help would be awesome
Thanks
evo 4g lte to boost
cdublu33 said:
Im getting the error 16 message too. everything is swiched over meid esn it even displays boost but no 3g i cant make calls or send texts, but if someone calls me it rings then hangs up. ive done what you said but when i reboot to go through the andriod setup it doesnt ask me to setup an htc account. i wondering how to go about that. Also, when i go to ##786# and reset everything and reboot the hands free activation actually activates, but when i get into the phone sprint is displayed again. im so close i can tast it and i know its something small. any help would be awesome
Thanks
Click to expand...
Click to collapse
I keep getting error code 67 wen i try n activate the 3g connection and use the web. ive successfully flashed it to boost but can't seem to get 3g working do u or do u know of another place to look on the web that can help. will be more than willing to share any past present or future info with u or others. email me at [email protected].
Factory resets
cdublu33 said:
Im getting the error 16 message too. everything is swiched over meid esn it even displays boost but no 3g i cant make calls or send texts, but if someone calls me it rings then hangs up. ive done what you said but when i reboot to go through the andriod setup it doesnt ask me to setup an htc account. i wondering how to go about that. Also, when i go to ##786# and reset everything and reboot the hands free activation actually activates, but when i get into the phone sprint is displayed again. im so close i can tast it and i know its something small. any help would be awesome
Thanks
Click to expand...
Click to collapse
I don't think most of you fully understand what happens when you perform the ESPT command ##786# (## RUN#), this is one of 2 types or of factory resets.
- The traditional Factory Reset that you normally do from either the settings menu> Back-up /Reset or from a Recovery (TWRP or CWM), only removes and your Google Account settings, it it does not change the Radio and Hardware settings within the phone. It does not remove your settings to MDN, MSID or Network Radios (basically the way the phone identifies with the network)
- ## RUN# > Reset, removes ALL phone identity modifications to the phone, less MEID , HEX, and DEC changes, and thus is a TRUE factory reset as it will remove your M.IP Usernames, MDN, MSID, and other settings that identify the phone to a network, thus leaving your phone with the ability to get back on the network upon reprogramming of account identities
You should only use this when flashing or giving/selling to phone to someone to prevent them from using your account or info. Use the traditional factory reset when simply trying to clear out your settings and not changes carriers or phone numbers.

Categories

Resources