I have Alltel and have been trying NexVision's ROM, the DCD and and and, pretty much everything I could find.
Running the 3.27.00 Radio ROM and tried a lot of ROMS of the WM 6.1 ones
I cant get any of them working right!!
I dont seem to get any success after flashing connecting to the Internet and also constantly have the roaming indicator on (that triangle on the top).
Also it changed my MSC/SPC or whatever you call it from 000000 to something else which makes it impossible for me to use the *228 to update roaming and PRL via their automated telephone thing.
Now my question is,
which is the best working ROM for the Titan on alltel? Especially how do I get the thing to connect to the Internet again???
how do I get the Titan connected to QPST in order for me to change the SPC back to 000000?????
I appreciate any help, this forum is so helpful and such great work you guys!!!!!
keep it up!!!!
jamesfelarca said:
I have Alltel and have been trying NexVision's ROM, the DCD and and and, pretty much everything I could find.
Running the 3.27.00 Radio ROM and tried a lot of ROMS of the WM 6.1 ones
I cant get any of them working right!!
I dont seem to get any success after flashing connecting to the Internet and also constantly have the roaming indicator on (that triangle on the top).
Also it changed my MSC/SPC or whatever you call it from 000000 to something else which makes it impossible for me to use the *228 to update roaming and PRL via their automated telephone thing.
Now my question is,
which is the best working ROM for the Titan on alltel? Especially how do I get the thing to connect to the Internet again???
how do I get the Titan connected to QPST in order for me to change the SPC back to 000000?????
I appreciate any help, this forum is so helpful and such great work you guys!!!!!
keep it up!!!!
Click to expand...
Click to collapse
It sounds like you let the Sprint customizations run. Sound about right?
Here's what I had to do after the Sprint customizations locked me out of the PST:
Geckotek said:
I flashed back to the stock VZW ROM (third time I think), I made sure all of my provisioning issues with Verizon were worked out (finally had the tech "kick the switch").
1) Then I proceeded to load the 2.4 bootloader,
2) then the 3.16 Unauthorized Sprint ROM w/ radio,
3) then finally installed a cooked DCD 2.3.2 ROM.
Things to note:
1) I never let the Sprint ROM boot up
2) I had no signal so ran *22802 then hit End as soon as it connected
3) Still no signal after reboot
4) No A key, MSID, or MDN issues, but I did re-enter the MSID and MDN as discussed in other threads
5) After re-entering MSID and MDN then after reboot I had signal
6) never had to run *228 to OTA program (in the past programming with *228 has reversed the effect of re-entering the MSID and MDN)
In general, I feel that the OTA from VZW sends down some programming that conflicts with the 3.27 radio...but I have nothing to prove that.
GPS is running great (I just loaded the AstroGPSLauncher)
Not sure about Rev A. It does seem snappy. What's a good site to test from the phone?
I'm happy and not re-flashing until a solid radio for Verizon arrives.
Click to expand...
Click to collapse
that all worked for you on Verozon, but I got alltel!!!
i still want to know how to change my MSC SPC, the Master Code back to 000000
and also what would you recommend is the best ROM that works for ALLTEL and also has the internet working.
I did all the MSID and MSN entering by hand.
I do get service for text messaging and Phone service as well.
i cannot get access to the internet, and also am constantly roaming. thats my issues
I have Alltel and DCD's 1.7.x ROMS are GREAT! No GPS but I don't need it.
you have a link to the ROMs??
jamesfelarca said:
you have a link to the ROMs??
Click to expand...
Click to collapse
I have Alltel PPC6800 and I am running Radio 3.27 and DCD2.3.2 just fine. Download the kitchen and run it. Alfter everything is installed then dial the *228 and pick option 3 for new phone. That will update all the settings you need.
Here is all the stuff you need. Pick which alltel rom you want. I know they all work good, some have more features.
http://forum.xda-developers.com/showthread.php?t=369920
jamesfelarca:To change the PRL you can put ##775 in the dial pad and send. Then enter the 000000 for the unlock code and select update PRL ->Menu->Edit and select the current PRL (probably a good idea to have this on your memory card) http://www.corolada.com/prl/ The one you want is 30031. Also you may want to do the ##778 unlock code 000000 and then check the NAM settings MDN and MSID should be your 10 digit number.
jamesfelarca said:
that all worked for you on Verozon, but I got alltel!!!
i still want to know how to change my MSC SPC, the Master Code back to 000000
and also what would you recommend is the best ROM that works for ALLTEL and also has the internet working.
I did all the MSID and MSN entering by hand.
I do get service for text messaging and Phone service as well.
i cannot get access to the internet, and also am constantly roaming. thats my issues
Click to expand...
Click to collapse
A) What my instructions help with is flashing a Sprint ROM to a non-Sprint phone
B) My instructions show you the only way I've ever seen how to remove the MSL from the phone.
So if you want your phone to work correctly, I suggest you give it a try. Your mistake was letting the Sprint customizations run....as far as I know, that is not easily reversible.
dwertz said:
I have Alltel PPC6800 and I am running Radio 3.27 and DCD2.3.2 just fine. Download the kitchen and run it. Alfter everything is installed then dial the *228 and pick option 3 for new phone. That will update all the settings you need.
Here is all the stuff you need. Pick which alltel rom you want. I know they all work good, some have more features.
http://forum.xda-developers.com/showthread.php?t=369920
Click to expand...
Click to collapse
Based on my experience, reflashing the ROM doesn't remove the MSL lock applied by the Sprint ROM. That's why I reverted to the stock bootloader and ROM/Radio.
dwertz said:
I have Alltel PPC6800 and I am running Radio 3.27 and DCD2.3.2 just fine.
Click to expand...
Click to collapse
Glad it works for you. I had problems with the radio. I was only receiving about 2/3 of sent SMS and OfficeSync did not update properly.
Here is a link to DCD's 1.7.0 here: http://forum.xda-developers.com/showthread.php?t=372853
I used the kitchen and it works very well for me.
i have alltel and update my ppc6800 fine all i had to do to remove the indicator icon was to do *228 option 3 wich is activate.
jamesfelarca said:
that all worked for you on Verozon, but I got alltel!!!
i still want to know how to change my MSC SPC, the Master Code back to 000000
and also what would you recommend is the best ROM that works for ALLTEL and also has the internet working.
I did all the MSID and MSN entering by hand.
I do get service for text messaging and Phone service as well.
i cannot get access to the internet, and also am constantly roaming. thats my issues
Click to expand...
Click to collapse
I'm not sure how to change the MCL back to 000000 but if you haven't already you should be able to use GetSPC to obtain the code for your device. Once you're in EPST check your Home SID to make sure this is correct. If not there's a good chance you'll be roaming all the time. Also make sure you have the newest PRL (*228 Option 2)
For your internet connection, check EPST Security and M.IP Default Profile and make sure your NAI and UserIDs are set to your phone number @alltel.net and your AAA shared secret and PPP Password should be "alltel" without the ". Your HDR AN AUTH Password should be your ESN (Hex).
I recommend dcd 2.32 also. It's what I'm using and it's working great.
Sounds like everyone else covered the how to's... but before you try anything else you might want to wait for DCD's new kitchen which will work with the official radio released for Sprint today.
Roaming Order
Does anyone know if there is a way to change the order of carriers my phone tries to roam to?
I have Alltel and apparently Sprint is at the top of there list. I live in an area where Sprint service sucks and there is no EVDO, but the Sprint tower is just close enough to be seen so I never get onto the Verizon Towers. I would like to set my Roaming order to be Verizon first then Sprint etc...
Thanks,
mr.ellsworth
Related
Carrier: Alltel
Started with WM5 ROM.
Flashed to DCD's 2.1 WM6 ROM last week, no issues noted.
Yesterday flashed to 2.2 WM6.1 ROM and now whenever I get a data session going in a strong EVDO area I get dropped down to 1x when the data session finishes connecting?
I've moved back to 2.1, used no2chems 6.1 ROM and back to DCD's 6.1 ROM. Same problem all around now.
Radio problem maybe? Or user? If radio, anyone get me a link to the original 1.4?
Thanks in advance if anyone has any tips, I've tried looking around but only find people with MMS or other issues.
---------------------
This solution apparently only works for Alltel customers, if anyone finds solutions for Sprint/Verizon/Telus I'll add the solution to this post.
ALLTEL:
1. Enter EPST (##778), Edit (password= 000000).
2. View Info (left soft key).
3. Choose the "Security" item.
4. In the "HDR AN AUTH Password(LONG)" field, click to highlight.
5. Menu (right soft key), Edit
6. In the "Value" field, enter your Hex ESN (make sure all characters are CAPITAL, lowercase will FAIL).
7. Ok. Menu. Ok to save, then reset.
--------------------------------------------
SPRINT:
MADMARTlGAN said:
Hey in case you guys are still having problems with this, I can tell you what worked for me with Sprint.
You'll need your unlock code, if you don't have it, you've gotta get it from either Sprint or from one of the tutorials i've seen floating around here and other forums.
1. Sync your titan to back up your data.
2. ##786# Choose edit, enter your unlock code, then choose menu>restore. This will reset everything to factory settings.
3. Reset
3. ##UNLOCKCODE# Again choose edit.
4. Both MDN and MSID should be your wireless number (this was confirmed by Sprint T2 tech support)
5. Reset
6. Call your voicemail to make sure your phone service is working.
7. Connect to the internet. It should trigger IOTA/Provisioning and then EVDO should be working.
8. Resync your **** and you're good to go.
Hope this helps, it worked for me.
Click to expand...
Click to collapse
I think with Alltel you get 1x when roaming. Do *228 option 3 < Thats to activate your phone if you haven't already
Then do *228 option 2 to update your roaming preferences which ridded me of roaming in coverage area!
Americanmetal said:
I think with Alltel you get 1x when roaming. Do *228 option 3 < Thats to activate your phone if you haven't already
Then do *228 option 2 to update your roaming preferences which ridded me of roaming in coverage area!
Click to expand...
Click to collapse
Thanks for the response, I've been through that already and same results...
I even went back to the stock Alltel ROM and Radio, same thing.
With PRL 30029 AND 40029...
Oh well, I'll figure something out as I love the speed of DCD's 2.2!!!!
jake1s said:
Yesterday flashed to 2.2 WM6.1 ROM and now whenever I get a data session going in a strong EVDO area I get dropped down to 1x when the data session finishes connecting?
Click to expand...
Click to collapse
Did you check Start->Settings->Personal->Phone->Services->Mode of Operation to make sure it wasn't set to 1X only? I think that was the default setting on my phone.
I had this same problem, and then I reflashed with the 3.16 sprint rom twice and it went away.
Appreciate the responses, but I don't have the "Mode of Operation" on my Alltel 6800. And I've reflashed all kinds of ROMs with no luck...
Thanks for the ideas though...
jake1s said:
Appreciate the responses, but I don't have the "Mode of Operation" on my Alltel 6800. And I've reflashed all kinds of ROMs with no luck...
Thanks for the ideas though...
Click to expand...
Click to collapse
With the newest Advanced Config app, you can unhide the "mode of operation" option in there. I got it from here somewhere, do a search. I doubt this is your issue. I had this problem yesterday with Sprint. I got data in 1xRTT, but not EVDO. I ended up calling Sprint and they had to deactivate and reactivate the internet services on my phone. Immediately it worked like a champ.
I had this problem also and was able to take care of it by going into EPST (##778) and going under the security settings and putting the ESN Hex Value of Your Phone under the HDR Password. Mine got lost whenever I upgraded the radio. This will allow you to lock back onto the EVDO network
corwinb said:
I had this problem also and was able to take care of it by going into EPST (##778) and going under the security settings and putting the ESN Hex Value of Your Phone under the HDR Password. Mine got lost whenever I upgraded the radio. This will allow you to lock back onto the EVDO network
Click to expand...
Click to collapse
THANK YOU! THANK YOU! THANK YOU!
That did the trick (after I did it a second time and made the letters capital) and now I'm cruising EVDO style!!
Thanks!!!!
Hi I have this same issue.
i typed ##778 send
and get the view, edit , and cancel options.
do i find the hdr password under the edit?
when i choose edit, i get a password prompt and i do not know the password.
i am on dcd rom 2.2.0
i edited mine, and it does get on ev instead of 1x so i was glad but when i opened ie i cant get a data connection up now at all???
corwinb said:
I had this problem also and was able to take care of it by going into EPST (##778) and going under the security settings and putting the ESN Hex Value of Your Phone under the HDR Password. Mine got lost whenever I upgraded the radio. This will allow you to lock back onto the EVDO network
Click to expand...
Click to collapse
I just checked and I have a bunch of garbled characters in this spot. Does anyone else see something like this?
What did you guys have in that slot before you added your esn hex number?
the password you need is unlock code you can only get from sprint.
i also had the weird characters, i edited these out with my esn hex as mentioned and now i cant get a data connection at all, i get an error that i cannot connect. Anyone with any idea on what i can do?
I thought of downgrading the radio and then installing this one again and starting from scratch any better ideas?
My HDR password is also extended ASCII characters, has been for every ROM version I have run, and I get EVDO and on the Internet as well. I thought that was a problem when I had no data connection from a previous ROM, but it wasn't.
What worked for me was to go all the way back to the official 2.17, then to the leaked 3.16, etc. I made sure everything was set up and working properly on each version before moving on to another ROM.
excess4 said:
the password you need is unlock code you can only get from sprint.
i also had the weird characters, i edited these out with my esn hex as mentioned and now i cant get a data connection at all, i get an error that i cannot connect. Anyone with any idea on what i can do?
I thought of downgrading the radio and then installing this one again and starting from scratch any better ideas?
Click to expand...
Click to collapse
not true there is a program to find out the msl code for your phone if i was on computer i would give u guys the link
aatreya said:
I just checked and I have a bunch of garbled characters in this spot. Does anyone else see something like this?
What did you guys have in that slot before you added your esn hex number?
Click to expand...
Click to collapse
Again, I'm on Alltel so maybe for some unknown reason there is more to it for you Sprint users.
But, my MDR Password field was goofy stuff, deleted it and put in my Hex ESN in ALL CAPITALs and I stay at EVDO when my data connection is made now.
Deleted MDR PASSWORD and put esn hex, internet not working
ok guys i messed up pretty badly and deleted the MDR password and put my esn hex instead and now i cant get on the net.
I have an HTC TITAN running DCD 2.2 and latest 3.27 radio
any suggestions on how to get the password back????
aatreya said:
I just checked and I have a bunch of garbled characters in this spot. Does anyone else see something like this?
What did you guys have in that slot before you added your esn hex number?
Click to expand...
Click to collapse
yes i also have a bunch of giberish in there. i am afraid to change it becuase there will be no way for me to put that giberish back in there with all those weird looking characters.
i found the edit password which was a bunch of 00000 as many as the field would take
and i understand some people now get ev but no data connection now. i am on verizon and i dont know if that will happen to me as well.
my connection now says ev and doesnt change back to 1x anymore so i am going to leave this as is for now and not change it.
also my a-key is blank if that makes a difference. phone works fine though.
whatbish said:
ok guys i messed up pretty badly and deleted the MDR password and put my esn hex instead and now i cant get on the net.
I have an HTC TITAN running DCD 2.2 and latest 3.27 radio
any suggestions on how to get the password back????
Click to expand...
Click to collapse
you mean hdr password right? I did not see an mdr password listed anywhere
Hi all i need help on Mogul. Originally its on Sprint then read a lot of upgrading process and finally did it. I did the RUU for alltel and everything works fine. The only thing is that i cant take out the roaming indicator. At first i was thinking its probably because of the PRL, but NO i got the latest PRL for alltel. Checked out the EPST settings and checked everything. I found out under Modem settings--Preffered Serving system-- Values are"Automatic, Roming only, Sprint Only." How do you take Sprint Only out? How can i make it fully work for Alltel? thanks.
I would try reflashing the Radio which would completely wipe out your settings then reprogram it for Alltel. I would think IOTA or something pre-filled in those settings.
Remember to *228, option 3 then dial *228 again and then option 2.
xweaponx said:
Remember to *228, option 3 then dial *228 again and then option 2.
Click to expand...
Click to collapse
thanks for the replies. xweaponx do you also have a value in your SCm of 42? What ROM should i use to fully erase everything on it?
One more thing i read somewhere that alltel just uses 800Mhz in some states. Due to this whenever i change my my phone settings to home only i loose my signal eventhough i have the correct system id. I;m doing this because i really wanted to take out the roaming indicator. Am i doing something wrong?
I seem to have the Sprint 3.16 Rom. But I do have the 3.27 Radio and even though I load the DCD 2.2.6 (verizon version) the phone ends up on the Sprint network.
I followed the directions based on this link http://forum.ppcgeeks.com/showthread.php?t=17667
and part of that includes:
4. Run the Unofficial carrier released rom 3.16 (this has the radio also)
>>>Click here for Sprint unofficial 3.16 Release
>>>This has the correct radio as well --that is why I recommend going this route first
**Special Note: Do not be concerned if you hear and see your phone reboot
and disconnect from your computer. This will happen multiple times as it
loads the 3.16. This process can take about 10mins or so to complete.
**Further Explanation: The reason for this step is to easily and safely get you
into the 3.16 real with the correct radio installed. Don't be concerned if you are on
another provider. You will take care of that when you download a custom rom
built specifically for your provider network.
This all seemd to work, but has left me on Sprints network.
What did I do wrong, or more importantly, how do I get the phone back onto Verizon's network?
Thanks Much. It's not a brick, but it's not real usefull right now.
I'd reflash.
Are you sure it's on Sprints' network and not that it just says "sprint" when dialing out?
You are not on Sprint, or shouldn't be. Open your web browser on your phone and go to www.showmyip.com. Scroll down to the paragraph where it states "Your currently assigned host name is..." and you should see Verizon in there somewhere. Mine shows Sprint, but I am with Sprint.
You can always change what the connection name is by going to Start, Settings, Connections, Connections and clicking Manage existing connections. Then select the Sprint name, click Edit and name it whatever you like. This will have no impact on your connection other than the name that pops up when connecting to the Internet.
No, it's Sprint all right
If I try to make a phone call, I get a message about an authentication problem that says to call Sprint, etc.
what happens when u try doing *228???
idk if you can find the latest prl file but i'd update that as it contains the tower lists
i use to get "Welcome to Verizon Wireless" messeges when i had US Cellular...and from wat i understood was that there was a mixup in the prl lists of tower codes etc
How do I apply a PRL list?
Sorry, I managed to find one. How do I apply it?
##PRL#...and it will ask for your msl...urs should be 000000 (thats wat i believe verizon has them set as)
browse to that file and it should load
Thanks, things are getting better now
Thanks to everyone for their kind help.
Just thought I would fill folks in on where I went wrong in case it's helpful to someone else.
First I missed a step in the direction when I was upgrading.
I skipped Step 5, to run the unlocker. I guess I thought that it was not necessary since the 3.16 Sprint Rom already included the 2.40 SPL. Anyway, once I ran the unlocker, it droped my SPL back to something like 1.20, but that version allowed me to run the 'new' 2.40 SPL, and once I had that, I could load the Radio.
That got me back to a kosher setup, but I was still on Verizon's network.
While I was waiting to understand how to load a PRL, I figured out that my phone was set to Automatic Roaming, and given that I am in a poor phone coverage area, my phone had roamed over to sprints network. Changing the Roaming setting to Automatic-A got me back on Verizon's network.
I still have authentication problems, but after doing a bit more searching, I think I need to call Verizon to clear that up. Once that's set, I think a *228 will get me the proper PRL.
So, While I don't have a working phone quite yet, I think I'm only minutes away from that.
Thanks again.
Got it working
Turns out I was not minutes away, I was hours.
I'll give the short version here.
The Sprint ROM that I had loaded left my EPST a complete mess. Reloading the stock verizon ROM fixed that (link below) then redoing the *228 worked, and then VZW could generate a A-Key for me and do some unspecified magic to get my internet access working.
Key thing appears to be to reload the Verzion ROM to reset the radio/EPST settings
Link to ROM is here
http://forum.xda-developers.com/showthread.php?t=359659&page=2
I've since solved my boot screen issue. I've installed :
dcd 3.2.5
Titan_Radio_ROM_3.42.30
dcd USCC Carrier 20080801
I have no data connection, I deleted it says my username and password are incorrect. I've tried every combination of my 10digit number and uss.net that I can think of. I've also reinstalled the uscc carrier cab, did the *228 and a soft reset. I can connect for 2 kilobyts then after that I can't connect. I'm not finding much on these forums to help me out. Does anyone have any ideas?
additional info
Sorry, the phone is a USCC 6800
hey just to let you know I have the 6900 and I dial #777 not sure if u wanna try that
I've had the same problem everytime I change ROMS. I have Verizon and found after I've "activated" the phone using the *228 then option 1, I then do *228 and option 2 (update my roaming capabilitys). That has always enabled my data connection.
kmanuel74 said:
I've had the same problem everytime I change ROMS. I have Verizon and found after I've "activated" the phone using the *228 then option 1, I then do *228 and option 2 (update my roaming capabilitys). That has always enabled my data connection.
Click to expand...
Click to collapse
If that doesnt work and you have an old cell phone around you can swap the ESN's on VZW's web site under customer service. When you do this you reset all the security information for the handset. I find this way to be the quickest method that has never failed. I use it so much I have the other ESN almost memorized!~
Scott
k3an said:
I've since solved my boot screen issue. I've installed :
dcd 3.2.5
Titan_Radio_ROM_3.42.30
dcd USCC Carrier 20080801
I have no data connection, I deleted it says my username and password are incorrect. I've tried every combination of my 10digit number and uss.net that I can think of. I've also reinstalled the uscc carrier cab, did the *228 and a soft reset. I can connect for 2 kilobyts then after that I can't connect. I'm not finding much on these forums to help me out. Does anyone have any ideas?
Click to expand...
Click to collapse
Run EPST and make sure that your PPP user name and password in there are correct.
If you didn't back up your phone's programming with QPST before and after flashing there is a chance that your EPST information is corrupt which would cause data to not work.
You will need your SPC/MSL in order to access EPST. You can try 000000 if nothing else works, and if it is 000000, you will need to set it back to the correct SPC/MSL otherwise *228 won't properly update your phone. Also USCC doesn't offer an option 1 or 2 after dialing *228, they don't have an OTA reprogramming of their phone.
If those changes don't work, you can try posting your entire EPST on here (removing any personal info, i.e. phone #, ESN, etc) and one of us USCC folks can compare it to ours and let you know what other areas look corrupt.
This is the one downside to USCC customers, we have to take extra steps while programming our phones to get them up and running, luckily it's a one time thing, once the phone is flashed the first time, these settings stick.
BTC
Hey,
I'm not sure why this happen but for some reason, I can not access the "pst" thing by pressing "##778#" or "##778". I was able to do it before, but ever since I switch to a new Mogul it wont let me. I also tried "##775#" to edit the PRL, but it still wont let me. I saw the sprint rep did some other numbers, but I forgot what they used. I need to get on to check if my PRL is up to date and see if the "REV A" is activated; and plus I just want to get on it because I'm curious now. Does anyone knows what other codes I can used? Thanks in advance.
ps. I'm using DCD 3.2.6 Radio 3.42.50
dunno.
3.2.6/3.42.50 myself and ##778# brings up EPST just fine.
i came on to ask the same question. i cant seem to get any codes to work. using DCD 3.2.5 on sprint
Some dialers don't allow ##codes. Try a different dialer, either reflash from the kitchen and select a different dialer, or unselect both dialers and use the default. I can't remember which dialer it was that didn't work, but I'm 99% sure one of them didn't work.
BTC