Related
i flashed my p4000 to the new rom, and my pst info cleared, which i have written down, but when i go to enter the new info in, it asks me for a unlock code...
in all the tuts i read it never told me how to check it or anything i dont know what the unlock code would be, i also bought it used, anyone know?
i cant use my phone until i fix this, and i really need my phone tonight.
Unlock code for the SIM or the phone? I presume theres nothing on your device till now, why not hard-reset or upgrade to another ROM?
Regards,
Carty..
htc p4000 have no sim cards.
im doing the ##778 to get into the PST menu, then when i try to edit it, to input my #, it asks me for an unlock code... :S
have you tried all 0s or 123456 or your phone number?
yes i tried a couple.
000000
123456
654321
i havnt changed the code...anyone know how to change it through an app or the default code?
arg!
i need my phone tonight.
Berserk87 said:
yes i tried a couple.
000000
123456
654321
i havnt changed the code...anyone know how to change it through an app or the default code?
arg!
i need my phone tonight.
Click to expand...
Click to collapse
If it's anything like sprint, then a simple call to your carrier should remedy the problem. with sprint it's called an "MSL" and they give it to you when programming your phone. So if you call and tell them that you need to 'reprogram' your phone, they should walk you through the steps along with giving you the code.
if i reflash it with the nueROM v2 build 5022, its a sprint rom...so that would mean i could use the 000000 as the unlock code?
also, after flashing to the new roms, my phone continually reset...would go on for a minute then reset... thats why i went back to my default rom, but now its asking for an unlock code >.>
Unzip this to your phone. Take your battery off and write down your Hex ESN. Run GetSPC.exe. Type your Hex ESN in the first box. The second box will be your unlock code.
*edit - removed file, missing keygen and someone linked to it on the next page.
k ill try that out, thank you.
any reason why my phone would be constantly reseting after installing the new roms?
k.
my EST is
but when i type that in, its saying "could not link to dll"
?
If I were you I would edit that post and remove that ESN # ASAP, people can use that to steal your service.
jjlwork said:
If I were you I would edit that post and remove that ESN # ASAP, people can use that to steal your service.
Click to expand...
Click to collapse
****, i was worried something like that could happen.
it should be the hex of that number though right?
do i include the first 3 letters?
k i converter the esn to hex and its still not working >.>
Berserk87 said:
k i converter the esn to hex and its still not working >.>
Click to expand...
Click to collapse
you might try the program found here:
http://forum.xda-developers.com/showthread.php?p=1541466 (it's the program called GetSPC)
i tried it on my phone and it provided an MSL number. hafta admit, tho - the MSL it gave me didn't work (and it differs from the MSL i have written down for my phone).
i might also suggest that you SEARCH...it's what I did to find the above. you might also try calling your carrier and ask them what the unlock code is.
OH -- use a HEX version of the ESN, and use ALL CAPS for any letters in the HEX version. It still may provide you with an invalid MSL...but worth a shot.
Make sure you are using the correct number for ESN, just converting the number from the back of your phone to hex will not work. Click program settings and device information on the bottom it will say ESN followed by a 8 digit hex number..that is the hex esn, you then put that in GetSPC and it will give you your 6 digit master unlock code. Dial ##6digitcodeSEND and it will open up to a place with 2 settings that can be changed, enter your 10 digit phone number for these two settings.
If you still can't get it, call Telus & tell them you can't make any calls, they will walk you thru the reprogramming process.
jjlwork said:
Make sure you are using the correct number for ESN, just converting the number from the back of your phone to hex will not work. Click program settings and device information on the bottom it will say ESN followed by a 8 digit hex number..that is the hex esn, you then put that in GetSPC and it will give you your 6 digit master unlock code. Dial ##6digitcodeSEND and it will open up to a place with 2 settings that can be changed, enter your 10 digit phone number for these two settings.
If you still can't get it, call Telus & tell them you can't make any calls, they will walk you thru the reprogramming process.
Click to expand...
Click to collapse
ahhhh
thats what i was doing :loollll
k, i entered my hex number and its still saying "cant link to dll"
i got like 15 minutes to figure this out :O
k the "phonetools" the other guy linked too was missing files, so it wouldnt work either way, lets try the real one >.>
WORKED, AWESOME.
now to test it out
Berserk87 said:
k the "phonetools" the other guy linked too was missing files, so it wouldnt work either way, lets try the real one >.>
Click to expand...
Click to collapse
Don't know why it didn't work, it's the exact same program. The only thing I took out was the PPC 2003 version so you wouldn't run that by mistake.
*edit - just downloaded it & it's missing the keygen. I don't know how that happened, sorry. I would've just linked to the original but I couldn't remember where I'd gotten it initially.
Hello all,
Last night, I tried updating my Rom on a sprint mogul to the recent dcd 2.2.6 and 3.27 radio.
I followed the steps of taking down the information, finding my unlock code, unlocking, and updating both roms.
It went with no problems. However my MSID was reset so i had to enter my unlock code that i got from get spc. before i reflashed my device, i checked to see if the code worked by trying to enter and edit epst.
But in windows 6.1 the unlock code didnt work, my msid and mdn were set to all 0.
I called sprint they gave me the same unlock code that didnt work.
So i tried reflashing back to the original sprint official release, that didnt work, i was getting an error 328 from the ruu.
I tried reflashing again dcd 2.2.6 rom, that worked but the radio wouldnt flash due to the same invalid command error 328 from the ruu.
So for a while i was stuck on the htc splash screen with a no radio display. I found a thread with a solution to the same problem. I flashed the leaked sprint rom 3.16, that worked and i was able to get up and running.
However in epst mode my hex and dec esn are all zeros. my original unlock code doesnt work, (the one from sprint), but when i enter in all 0 in getspc it generates the proper unlock code,
but i still can not connect to the sprint network even tho i am able to set my msid and msn to the correct values, my esn is still wrong (displays all zeros)
Can any please tell me if i can fix this, I was on the phone with sprint for 2 hrs with no avail. I need to set my esn on the phone to match my esn in hardware
Thank you,
Kevin
Okay, if I read your post right you do have your MSL number (unlock code) right? If you do, go to your keypad on the phone and dial ##3282# (##DATA#). It should ask you if you want to view or edit. Choose edit and type in your MSL number. On the main screen there should be an option on the left softkey that says "View Info". Choose that and then select "Advanced". At the top I believe you can edit your ESN number.
Hope that helps.
krazieintentz said:
Hello all,
Last night, I tried updating my Rom on a sprint mogul to the recent dcd 2.2.6 and 3.27 radio.
I followed the steps of taking down the information, finding my unlock code, unlocking, and updating both roms.
It went with no problems. However my MSID was reset so i had to enter my unlock code that i got from get spc. before i reflashed my device, i checked to see if the code worked by trying to enter and edit epst.
But in windows 6.1 the unlock code didnt work, my msid and mdn were set to all 0.
I called sprint they gave me the same unlock code that didnt work.
So i tried reflashing back to the original sprint official release, that didnt work, i was getting an error 328 from the ruu.
I tried reflashing again dcd 2.2.6 rom, that worked but the radio wouldnt flash due to the same invalid command error 328 from the ruu.
So for a while i was stuck on the htc splash screen with a no radio display. I found a thread with a solution to the same problem. I flashed the leaked sprint rom 3.16, that worked and i was able to get up and running.
However in epst mode my hex and dec esn are all zeros. my original unlock code doesnt work, (the one from sprint), but when i enter in all 0 in getspc it generates the proper unlock code,
but i still can not connect to the sprint network even tho i am able to set my msid and msn to the correct values, my esn is still wrong (displays all zeros)
Can any please tell me if i can fix this, I was on the phone with sprint for 2 hrs with no avail. I need to set my esn on the phone to match my esn in hardware
Thank you,
Kevin
Click to expand...
Click to collapse
thank you for your reply.
I do have my unlock code. the ##data# shows the esn in advanced settings, but the box is greyed out and will not allow me to edit it.
It still shows 00000000.
Thank you, any other ideas, maybe a registy edit?
It sounds like something happened during the flash process. I talked to a PCS rep and they said you would have to bring it in and get it swapped. I can't think on any other way to get that info updated. Sorry.
no there is another way, you can sniff for the spc, the original thread about getspc had directions @ ppcgeeks
dalvarez7 said:
Okay, if I read your post right you do have your MSL number (unlock code) right? If you do, go to your keypad on the phone and dial ##3282# (##DATA#). It should ask you if you want to view or edit. Choose edit and type in your MSL number. On the main screen there should be an option on the left softkey that says "View Info". Choose that and then select "Advanced". At the top I believe you can edit your ESN number.
Hope that helps.
Click to expand...
Click to collapse
You need ths link
http://forum.ppcgeeks.com/showthread.php?t=17495&highlight=getspc
I went to a sprint tech and they said they i had to replace the phone, and they would order me a new one. but right now i have to wait the warehouse doesnt have any instock.
there is another way however, if it was erased by software, it can be changed by software.
I did not find anything relevant on the link above, i will keep looking through it. If someone could point me in a closer direction.
I do have my unlock code, currently all zeros, so im not looking to get my MSL number, im looking to change my ESN back to what it was, somehow it was set to all 0's during the rom update process.
Thank you,
Kevin
Perhaps you should change the thread title to something more specific to separate yourself from the masses who can't boot because they didn't upgrade their radio.
Perhaps try an RTN reset? This is a hard reset that erases provisioning data. I don't know if it can restore an ESN, but worth a try.
Go to dialer
##786# (##RTN#)
Menu->reset
krazieintentz said:
Hello all,
I followed the steps of taking down the information, finding my unlock code, unlocking, and updating both roms.
Click to expand...
Click to collapse
Is it just me or does something seem wrong with this quote. Read the instructions here: http://forum.ppcgeeks.com/showthread.php?t=17667
The phone needs to have the unlocker program run to install a custom rom. The code from GetSPC allows you to edit the settings not unlock your phone.
hohnan said:
Is it just me or does something seem wrong with this quote. Read the instructions here: http://forum.ppcgeeks.com/showthread.php?t=17667
The phone needs to have the unlocker program run to install a custom rom. The code from GetSPC allows you to edit the settings not unlock your phone.
Click to expand...
Click to collapse
Look i dont need any smart comments.
Well actually for your information, the MSL code is used to unlock your phone. the unlocker program is used to unlock your bootloader to accept a custom rom.
MSL - master subsidy lock, this locks network settings so that a user can not change them, the code given by getspc is stored in nV ram on the phone and is used to gain access to these files, thus "unlocking" the phone. unlocking the bootloader is another story...
anywho, i was able to get my phone working, i reprogrammed my esn, reprogrammed my MSL from all zeros to the proper value, and now my phone is back on the sprint network.
if you guys are interested i will write a tutorial on how i did this, just to respond to the other post, a hard reset does not restore esn data.
Good for you! I'm glad you figured it out. I would be interested on how you got it working again.
krazieintentz said:
Look i dont need any smart comments.
Well actually for your information, the MSL code is used to unlock your phone. the unlocker program is used to unlock your bootloader to accept a custom rom.
MSL - master subsidy lock, this locks network settings so that a user can not change them, the code given by getspc is stored in nV ram on the phone and is used to gain access to these files, thus "unlocking" the phone. unlocking the bootloader is another story...
anywho, i was able to get my phone working, i reprogrammed my esn, reprogrammed my MSL from all zeros to the proper value, and now my phone is back on the sprint network.
if you guys are interested i will write a tutorial on how i did this, just to respond to the other post, a hard reset does not restore esn data.
Click to expand...
Click to collapse
I also would be interested
dalvarez7 said:
Good for you! I'm glad you figured it out. I would be interested on how you got it working again.
Click to expand...
Click to collapse
This would be a handy bit of knowledge as they go thru great lengths to keep it from being done. Ususally the filesystem for that section of the phone is locked and protected, requiring the QXDM (Qualcomm Extensible Diagnostic Monitor) software to get in. I have an older version that I used to use to play with older phones and it worked great, but a newer one would be needed for these phones. Old style glitch corruption will mess up any filesystem and even mess up protected areas, which is likely what happened to yours. I would love to know how you did it without QXDM ;-)Thanks.
krazieintentz said:
Look i dont need any smart comments.
Well actually for your information, the MSL code is used to unlock your phone. the unlocker program is used to unlock your bootloader to accept a custom rom.
MSL - master subsidy lock, this locks network settings so that a user can not change them, the code given by getspc is stored in nV ram on the phone and is used to gain access to these files, thus "unlocking" the phone. unlocking the bootloader is another story...
anywho.........
Click to expand...
Click to collapse
Wow. A pretty harsh response to someone who was trying to help out.
A tutorial will be nice. if you have the time!
krazieintentz said:
Look i dont need any smart comments.
Well actually for your information, the MSL code is used to unlock your phone. the unlocker program is used to unlock your bootloader to accept a custom rom.
MSL - master subsidy lock, this locks network settings so that a user can not change them, the code given by getspc is stored in nV ram on the phone and is used to gain access to these files, thus "unlocking" the phone. unlocking the bootloader is another story...
anywho, i was able to get my phone working, i reprogrammed my esn, reprogrammed my MSL from all zeros to the proper value, and now my phone is back on the sprint network.
if you guys are interested i will write a tutorial on how i did this, just to respond to the other post, a hard reset does not restore esn data.
Click to expand...
Click to collapse
Krazeintentz,
I would be very interested in your final fix for this problem. The exact same thing happened to me a while back and my only way out at the time was a replacement titan under warranty from vzw.
If we had your steps to recovery then we would be a lot closer to having a disaster recovery wiki.
As another poster said, yours was a real rom flashing problem as opposed to the numerous "brick" cases that we see everyday from just half done flashes. So it makes it all the more relevant that we have a wiki for this problem.
Regards
Since he has not said, heres a theory
The filesystem is protected from editing in the address range where the ESN resides. The QXDM software shows the actual file structure of the chipsets flash and the files have actual attributes and the ESN file is read only, so the EPST is not supposed to be able to edit the ESN (as this would be cloneing a phone and not legal). If you follow the steps in a flash memory update, you would see that the contents of these protected files are read, saved, and then the flash is totally erased, then written with the new revision, and finally the protected storage is written and the attribute is set to read only. The QXDM is required to manually unlock these attributes, but there is a key that allows the flash utility to erase the stuff. if the flash was interrupted either by hardware or software error at the point after the erase and writeback but before the write of protected file area, the ESN would be blank and also the EPST in the phone would be able to edit it in edit mode because the attribute is the very last thing written. I bet thats how he fixed it and now has a cloneable phone too and can change his ESN any time he wants, at least until he flashes the radio again which will fix the glitch by process. Thats probably what he did.
Hey guys Im a noob and im having a bit of problems
Im stuck in the bootloader screen
TITA100 MFG
SPL-2.40 Olipro
CPLD-9
My comp has windows vista premium so instead of activesync i have windows device center 6.1 I have unclicked allow USB connections
but i think my comp doesnt recognize that they the phone is connected at all although i do here the sound that lets me know that a usb device is connected
exitbl.exe doesn't work keeps telling me
cannot open USB port
Please make sure that USB connection in Activesync is disabled
Also make sure that your USB cable is properly connected
if it helps im on a bell phone
Ugh
Can you help me with NAM settings?
I accidentally let the Sprint Customization run when I was trying to update to the newest rom.
and I'm not sure what all I need to change in EPST.
Thanks
there will be issues if the customization ran it will say your in roaming when you are not... i would re flash to the alltel stock rom then upgrade to prevent issues
Agreed....the only solution I've discovered to letting the Sprint customizations run (on a non-Sprint phone) is to reflash your stock ROM, then flash to the desired custom ROM. Good luck!
Would the Alltel rom on HTC's site be considered stock?
I'm trying it now.
Americanmetal said:
Would the Alltel rom on HTC's site be considered stock?
I'm trying it now.
Click to expand...
Click to collapse
Ugh
Still getting "We cannot update your roaming service (2)/ activate your phone (3) through this automated system" when I call up *228.
Just to make sure my security settings are right:
HDR AN AUTH User... [email protected]
HDR AN AUTH Pass... ESN (Hex or Dec?)
PPP USER ID... [email protected]
PPP Password...alltel
NAM name is NAM1 correct?
99 views and only 2 other reply's besides my self.
CMON someone has to know how to help!
Americanmetal said:
Just to make sure my security settings are right:
HDR AN AUTH User... [email protected]
HDR AN AUTH Pass... ESN (Hex or Dec?)
PPP USER ID... [email protected]
PPP Password...alltel
NAM name is NAM1 correct?
Click to expand...
Click to collapse
i'm an allter user but haven't experienced your issue. As far as access to data your username is your ten digit @alltel.net, and your password is alltel. I'm not sure about your AUTH Pass. i have a esn hex and dec available so not sure how to help you.
you loaded the new stock rom from HTC, and when trying to activate your phone it said what?
"We are unable to update your handset via this automated system."
jshaas2 said:
i'm an allter user but haven't experienced your issue. As far as access to data your username is your ten digit @alltel.net, and your password is alltel. I'm not sure about your AUTH Pass. i have a esn hex and dec available so not sure how to help you.
you loaded the new stock rom from HTC, and when trying to activate your phone it said what?
Click to expand...
Click to collapse
My Auth pass is my Hex ESN
You can try flashing stock again. Then call alltel or take it into a store. They'll likely be confused and replace or they'll be able to fix it.
Americanmetal said:
"We are unable to update your handset via this automated system.
My Auth pass is my Hex ESN
Click to expand...
Click to collapse
It will take someone above my knowledge to help you, or you could do the worst thing imaginable and call alltel data tech.
Sounds like your MSL/EPST is no longer 000000. This is just a guess. I bought a phone off ebay that was actually a sprint phone but I got it to work on alltel by changing this back to 000000. I was unable to activate until this was changed. Here is a post I followed to change it.
http://forum.ppcgeeks.com/showthread.php?t=22587
SilverHawke said:
Sounds like your MSL/EPST is no longer 000000. This is just a guess. I bought a phone off ebay that was actually a sprint phone but I got it to work on alltel by changing this back to 000000. I was unable to activate until this was changed. Here is a post I followed to change it.
http://forum.ppcgeeks.com/showthread.php?t=22587
Click to expand...
Click to collapse
Yeah I noticed it wasn't 000000 but I didn't think it would be a problem
I will try this!
SilverHawke said:
Sounds like your MSL/EPST is no longer 000000. This is just a guess. I bought a phone off ebay that was actually a sprint phone but I got it to work on alltel by changing this back to 000000. I was unable to activate until this was changed. Here is a post I followed to change it.
http://forum.ppcgeeks.com/showthread.php?t=22587
Click to expand...
Click to collapse
YOUR THE ****ING MAN!!
****ing everything works now. Awesome
Glad you got it working!!
Without SPC code , Sprint Note 3 CDMA Flashing.
Root Required
Install Terminal Emulator or use "adb tool" cmd from pc
1) Enable hidden menu.Type below cmd
adb shell
su
am broadcast -a android.provider.Telephony.SECRET_CODE -d android_secret_code://HIDDENMENUENABLE (then select enable hidden menu)
2) Create Com port. Type below cmd
am broadcast -a android.provider.Telephony.SECRET_CODE -d android_secret_code://IOTHIDDENMENU (and here you go a menu to enable diag edit mdn and min and some other features).
3)Connect phone via DFS tool
send this code : 2012112120131219 , log will show phone is Unlocked
on the SPC tab select "Ignore SPC"
4) Go to NAM & entered all required details & write plr through pc or load from server.
5) Go to DATA & enter 1x & 3g username & password.
thn reboot the phone , after reboot you'll get the signal.
I have tested this method for Reliance CDMA network.
Gurus , help me to get SPC code . this is required for GSM unlocking, as S4 & HTC one.
How to Get MSL/SPC code
No Root Required
Here is some steps which i used.
1. enable USB debug
2. connect phone with the pc , it will ask you for permission. click on check box & Ok.
3. run the cmd "adb devices" it will show you (see screenshot)
List of devices attached
0f3ab02x device
if not(offline) pl update your adb tool. search on Google "latest adb for 4.3 or 4.2.2 android".
4. Copy GETMSL.bat into adb folder & run
5. Dial ##3424# enter 123456
6. cmd will not show you any output.
7. goto adb folder & open logcat.txt file (dnt close cmd)
8. search "I/MSL_Checker" press enter 4-5 times & you'll get the MSL code.(see screenshot)
Special Thanks to "robhuffster"
Special Thanks to robhuffster
hi,
i fail to flashed with the instruction above.
may i know on what radio your sprint note 3 are?
thanks
pl refer screenshots,
yes you can enable diagnostic port without msl, and change prl, but no MIN, MDN or A-KEY changing without the msl code.
Sent from my SPH-L900 using Tapatalk
yansen said:
yes you can enable diagnostic port without msl, and change prl, but no MIN, MDN or A-KEY changing without the msl code.
Sent from my SPH-L900 using Tapatalk
Click to expand...
Click to collapse
enable hidden menu & goto MSL menu & enter MIN & MDN . AKEY will not done through this method.
javed91214 said:
enable hidden menu & goto MSL menu & enter MIN & MDN . AKEY will not done through this method.
Click to expand...
Click to collapse
could you tell me how to change the AKEY whithout SPC/MSL. Thanks!
aihuohua said:
could you tell me how to change the AKEY whithout SPC/MSL. Thanks!
Click to expand...
Click to collapse
without SPC it is not possible. searching new way to change AKEY. will update very soon.
aihuohua said:
could you tell me how to change the AKEY whithout SPC/MSL. Thanks!
Click to expand...
Click to collapse
even if you have AKEY, you can not change it through DFS.
AKEY only can be changed through OTA programming.
verizon note 3 can easily change AKEY though, just wondering what blocking sprint note 3 from changing AKEY.
This method works
yansen said:
even if you have AKEY, you can not change it through DFS.
AKEY only can be changed through OTA programming.
verizon note 3 can easily change AKEY though, just wondering what blocking sprint note 3 from changing AKEY.
Click to expand...
Click to collapse
This method works just follow the op's instructions to a T and youll be running on a different network, its a real simple procedure,
how to get msl without calling sprint on Note 3
I have posted a thread for how to get your sprint note 3 msl without sprint. here is the link http://forum.xda-developers.com/showthread.php?p=47580651#post47580651
robhuffster said:
I have posted a thread for how to get your sprint note 3 msl without sprint. here is the link http://forum.xda-developers.com/showthread.php?p=47580651#post47580651
Click to expand...
Click to collapse
Thanks a lot "robhuffster" i got the MSL code.
javed91214 said:
Thanks a lot "robhuffster" i got the MSL code.
Click to expand...
Click to collapse
Nice I am glad it is working for you, hopefully it works with other builds besides MI3, if anyone gets it with other builds please let me know, thanks
javed91214 said:
Thanks a lot "robhuffster" i got the MSL code.
Click to expand...
Click to collapse
Now that you got your MSL have you had any luck doing a full flash ?
ghanafirst said:
Now that you got your MSL have you had any luck doing a full flash ?
Click to expand...
Click to collapse
yes full flash done but only one issue still not able to change AKEY. data , sms is working fine . only call drop issue bcz of AKEY.
javed91214 said:
yes full flash done but only one issue still not able to change AKEY. data , sms is working fine . only call drop issue bcz of AKEY.
Click to expand...
Click to collapse
What program are you using to write the A-keys ???
ghanafirst said:
What program are you using to write the A-keys ???
Click to expand...
Click to collapse
DFS tool , CDMA WS 2.7 & Flashphone.
Any one who got the success pl update here.
javed91214 said:
DFS tool , CDMA WS 2.7 & Flashphone.
Any one who got the success pl update here.
Click to expand...
Click to collapse
As i mention earlier, akey can only be changed through OTA programming, and the funniest thing on my case, OTA programming only change akey but failed to program mdn, min, etc, so i have to manually edit them with dfs
Sent from my SM-N900P using Tapatalk
yansen said:
As i mention earlier, akey can only be changed through OTA programming, and the funniest thing on my case, OTA programming only change akey but failed to program mdn, min, etc, so i have to manually edit them with dfs
Sent from my SM-N900P using Tapatalk
Click to expand...
Click to collapse
Akey can be changed manually, but note 3 it's not allowing you to change.
There are many posts on XDA & another million sites on how to.
Sent from my SPH-L720 using Tapatalk
javed91214 said:
DFS tool , CDMA WS 2.7 & Flashphone.
Any one who got the success pl update here.
Click to expand...
Click to collapse
I have a feeling a paid CDMA WS will do the trick, I think it's time to buy the new CDMA.
ghanafirst said:
I have a feeling a paid CDMA WS will do the trick, I think it's time to buy the new CDMA.
Click to expand...
Click to collapse
Nope, tried already.
Sent from my SPH-L720 using Tapatalk
Hello
I managed to pickup a G3 from sprint but dont have an MSL/Service code. Is there a way to enable the Diag mode so that the phone can be detected in DFS for programming
I have tried the commands from http://forum.xda-developers.com/showthread.php?t=2049701 but not sure if these work as I cant get the phone to connect properly in DFS. In DFS it keeps saying its in Data Mode. Am I missing something
Thanks
RESOLVED:
I was finally after doing some trial and error managed to get this. I am international and wasnt able to get into DIAG mode as it kept asking me for MSL/Service code which I ddint have.
So here is what worked for me. I am ROOTED thanks as that helped a lot.
I used the app (Shortcut Master Lite) thanks to the Post from @Dvin211 in the thread http://forum.xda-developers.com/sprint-lg-g3/general/taking-apart-lghiddenmenu-apk-t2841502
In this I did a search for "diag" and this allowed me to enable the "diagnostic mode" without the Service code
Once I enabled diagnostic mode I used CDMA Dev tool to get the Service Code/MSL for my deivce.
Hope this helps. If it does please donate to the Root finders as they deserve all of it
garynsa said:
Hello
I managed to pickup a G3 from sprint but dont have an MSL/Service code. Is there a way to enable the Diag mode so that the phone can be detected in DFS for programming
I have tried the commands from http://forum.xda-developers.com/showthread.php?t=2049701 but not sure if these work as I cant get the phone to connect properly in DFS. In DFS it keeps saying its in Data Mode. Am I missing something
Thanks
Click to expand...
Click to collapse
I used this to get my MSL and it worked perfectly, and it also lets you upload a PRL and some other stuff. just follow the directions, and its easy!
http://forum.xda-developers.com/showthread.php?t=2521276
Can u tell me the settings you used. Bcos u tried this as well. I can't get msl using nv or LG mode
did you use the G3 drivers, not the drivers in the post?
edit: I used the G3 drivers that were in one of the original LG G3 forums, not the sprint one as we didnt have root, and i was able to just do ##DIAG# to enter diag mode
Jimmy50941 said:
did you use the G3 drivers, not the drivers in the post?
edit: I used the G3 drivers that were in one of the original LG G3 forums, not the sprint one as we didnt have root, and i was able to just do ##DIAG# to enter diag mode
Click to expand...
Click to collapse
The issue is when I press ##DIAG# its asking me for Service Code
Odd. Mine just goes straight to the diag menu. And it worked last week, well before got root
Sent from my LGLS990 using XDA Free mobile app
Mine doesn't ask service code for diag mode.. just did ##3424# and enabled.
Sent from my LGLS990 using XDA Free mobile app
drancid said:
Mine doesn't ask service code for diag mode.. just did ##3424# and enabled.
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
Thats strange could be because I am international and I dont have the phone activated. I dont know... really strange. Just need to find a way to get the MSL Code.
drancid said:
Mine doesn't ask service code for diag mode.. just did ##3424# and enabled.
Sent from my LGLS990 using XDA Free mobile app
Click to expand...
Click to collapse
Can u tell me your radio version.
garynsa said:
Can u tell me your radio version.
Click to expand...
Click to collapse
I can't find my radio version...
Sent from my LGLS990 using XDA Free mobile app
Ok. Thanks
Thanks a lot, Your way worked.
Is it possible to unlock the phone with the MSL code?
Assamat said:
Thanks a lot, Your way worked.
Is it possible to unlock the phone with the MSL code?
Click to expand...
Click to collapse
I did try to use the G2 unlock method and copy the carrier folder. I couldnt get the unlock working though. I do see wifi tether options but the sim doesnt get recognized
Yes I have also tried this, and it did not work, perhaps, we can get the carrier folder from an unlocked LG G3 from sprint, pherhaps this will work.
I have seen in this thread, that some users got an unlock from Sprint
http://forum.xda-developers.com/showpost.php?p=54509040&postcount=47
Assamat said:
Yes I have also tried this, and it did not work, perhaps, we can get the carrier folder from an unlocked LG G3 from sprint, pherhaps this will work.
I have seen in this thread, that some users got an unlock from Sprint
http://forum.xda-developers.com/showpost.php?p=54509040&postcount=47
Click to expand...
Click to collapse
That would be nice
Jimmy50941 said:
I used this to get my MSL and it worked perfectly, and it also lets you upload a PRL and some other stuff. just follow the directions, and its easy!
http://forum.xda-developers.com/showthread.php?t=2521276
Click to expand...
Click to collapse
This worked like a charm thanks! Only weird thing was it killed my cellular radio completely. Said searching for service and never came up even after 5 minutes. Had to reboot to get service back.
Visionikz03 said:
This worked like a charm thanks! Only weird thing was it killed my cellular radio completely. Said searching for service and never came up even after 5 minutes. Had to reboot to get service back.
Click to expand...
Click to collapse
Cdma workshop use requires reboot but i thought that was when you changed something
garynsa said:
Hello
I managed to pickup a G3 from sprint but dont have an MSL/Service code. Is there a way to enable the Diag mode so that the phone can be detected in DFS for programming
I have tried the commands from http://forum.xda-developers.com/showthread.php?t=2049701 but not sure if these work as I cant get the phone to connect properly in DFS. In DFS it keeps saying its in Data Mode. Am I missing something
Thanks
RESOLVED:
I was finally after doing some trial and error managed to get this. I am international and wasnt able to get into DIAG mode as it kept asking me for MSL/Service code which I ddint have.
So here is what worked for me. I am ROOTED thanks as that helped a lot.
I used the app (Shortcut Master Lite) thanks to the Post from @Dvin211 in the thread http://forum.xda-developers.com/sprint-lg-g3/general/taking-apart-lghiddenmenu-apk-t2841502
In this I did a search for "diag" and this allowed me to enable the "diagnostic mode" without the Service code
Once I enabled diagnostic mode I used CDMA Dev tool to get the Service Code/MSL for my deivce.
Hope this helps. If it does please donate to the Root finders as they deserve all of it
Click to expand...
Click to collapse
where did u find the diag mode . can u please post the process by which u enabled the diag mode.
Keshav_is said:
where did u find the diag mode . can u please post the process by which u enabled the diag mode.
Click to expand...
Click to collapse
I used the app Shortcut master lite app. Pm me your number if u in India will call u
garynsa said:
Hello
I managed to pickup a G3 from sprint but dont have an MSL/Service code. Is there a way to enable the Diag mode so that the phone can be detected in DFS for programming
I have tried the commands from http://forum.xda-developers.com/showthread.php?t=2049701 but not sure if these work as I cant get the phone to connect properly in DFS. In DFS it keeps saying its in Data Mode. Am I missing something
Thanks
RESOLVED:
I was finally after doing some trial and error managed to get this. I am international and wasnt able to get into DIAG mode as it kept asking me for MSL/Service code which I ddint have.
So here is what worked for me. I am ROOTED thanks as that helped a lot.
I used the app (Shortcut Master Lite) thanks to the Post from @Dvin211 in the thread http://forum.xda-developers.com/sprint-lg-g3/general/taking-apart-lghiddenmenu-apk-t2841502
In this I did a search for "diag" and this allowed me to enable the "diagnostic mode" without the Service code
Once I enabled diagnostic mode I used CDMA Dev tool to get the Service Code/MSL for my deivce.
Hope this helps. If it does please donate to the Root finders as they deserve all of it
Click to expand...
Click to collapse
can u please take some pics of the diagnostic mode .. I can't find it with shortcut.