With PPCGeeks undergoing their upgrade, where can I download 2.40-olipro from in the mean time? I'm wanting to do some rom upgrades but it seems I need this to unload things for it. I'm trying to install the radio 3.27 and one of the titan 2.x roms with the GPS update.
here u go...
Mod Edit:
Unfortunately the attached file was for an earlier version - see posts below for 2.4
origins81 said:
try hitting search first
Click to expand...
Click to collapse
I did and 2.40 olipro only gave me messages saying that I needed it, not that it was called TitanUnlock. Thanks for the link.
Did I miss somthing?
I downloaded the file and it still said version 1.20Olipro did I miss something?
I saw that it was 1.2 but it didn't register that it was the wrong version and that probably explains the problems I was having trying to load the new rom.
olipro 2.40 here you go
this is the link when ppcgeeks.com comes back up you can get it.
however attached is the file you want and need. BUTTTTTTTTTT
you will now need to find the "re-locker" so you can relock the old olipro and use the new.
Thanks for the file, but I guess if I need to find another program, will wait for either ppcgeeks to come back up or sprint to release the offical rom.
Does anyone have the program for "re-locker"?
Here's the file with the proper name. It's not the easiest to find especially with the other side being down. So without being rude I shall set you in the right direction. Plus if you search for "titan unlocker" as per the other file name you are liable to be loading the OLD unlocker not new since it is generically named such.
edit....
Sorry I guess my interrution while posting this caused me to duplicate someones post....
Thank you for the links. You are far from being rude, but show you understand that all the searching in the world won't help when you don't have the right information and that one of the main supports is missing.
Thank you all for your help! I ended up googling and searching and came upon this post from another board.
"I had the exact same problem.
Connect your phone (while in Windows, not from the bootloader) to your computer and make sure it creates an ActiveSync connection.
Download the file from here: ftp://ppcgeeks:[email protected] . Extract it and it should launch the Titanunlocker.bat. If it doesn't, just launch the batch file from the place you extracted the files. Follow the prompts, and when it's done, you should have 2.40 installed. I too couldn't get 1.20 off, but after I did this, I now have 2.40 bootloader."
----------------
Also if you are stuck with the bootloader screen (rainbow) you can just run titan_exitbl.exe in the file I've included it will allow you to boot. Also you must disable activesync from looking for usb connections if you have to go the titan_exitbl.exe route.
The file listed able will actually attempt to update to 2.40 once you run it, really automated.
Thanks to PDAPhoneHome's jrider for the post.
I was on 1.20, but I didn't have to relock or anything to upgrade to 2.40. I just went onto the bootloader screen, then ran the RUU exe for 2.40 in the TitanUnlocker zip.
Oh boy, uncrackable Apache 6700!
I cannot get the hard SPL to crack!!!! Help!!!
I currently have Bell Mobility 2.13 on my phone. I have installed .NET framework 3.5 on my PC. I have done a hard reset on my 6700. Connected to activesync. I have tried to run kaiser-HardSPLv1, titanunlocker and Hard-SPL-MFG. I my phone locks up before I get to a tri-coloured screen. I disconnect from my PC and reconnect, then the Flash upgrader program starts and my phone turns off by itself and then my PC gives me an connection error. Any ideas?
I cannot get the hard SPL to crack!!!! Help!!!
I currently have Bell Mobility 2.13 on my phone. I have installed .NET framework 3.5 on my PC. I have done a hard reset on my 6700. Connected to activesync. I have tried to run kaiser-HardSPLv1, titanunlocker and Hard-SPL-MFG. I my phone locks up before I get to a tri-coloured screen. I disconnect from my PC and reconnect, then the Flash upgrader program starts and my phone turns off by itself and then my PC gives me an connection error. Any ideas?
Click to expand...
Click to collapse
Dude...this is the Titan forum, not Apache. Why you would try altering your bootloader with unlockers specifically meant for other devices (kaiser & titan) is beyond me.
superlover911 said:
I cannot get the hard SPL to crack!!!! Help!!!
I currently have Bell Mobility 2.13 on my phone. I have installed .NET framework 3.5 on my PC. I have done a hard reset on my 6700. Connected to activesync. I have tried to run kaiser-HardSPLv1, titanunlocker and Hard-SPL-MFG. I my phone locks up before I get to a tri-coloured screen. I disconnect from my PC and reconnect, then the Flash upgrader program starts and my phone turns off by itself and then my PC gives me an connection error. Any ideas?
Click to expand...
Click to collapse
This post shows that people are not worried about what they do to their phone. 911, you need to read the wiki for your phone (APACHE 6700) and do not use any software or roms for other devices (i.e. 6800, Kaiser, Titan, etc) unless you are 100% certain what you are doing. You are really close to hosing your phone.
Read this twice. http://wiki.xda-developers.com/index.php?pagename=HTC_Apache
x64 compatibility?
Am running XP x64 edition and the 2.4 Olipro wasn't working, saying it cannot run in a 64-bit OS.
Any suggestions/solutions? I don't have access to any 32-bit computers.
EDIT: Already resolved elsewhere:
MrTek said:
it is because the sleep4 command is 16bit which is not allowed to to run on 64 bit os
just edit the cmd file in a text editor and replace sleep4 with pause
now it will pause when it runs which means you have to hit enter to continue which should be enough a delay
i just did this exact same thing tonight without issue
Click to expand...
Click to collapse
Related
Ok, I've been trying to update my 8525 for hours...here is my problem. First, I tried to HardSPL-v7 but I kept getting an "Error [240] File open". I think this is preventing me from doing any ROM update. When I try to run the Cingular ROM update activesync shuts down and I get a connection error, I think it is "error [260]". I have wiped or cleaned out my 8525 so that I am back to day one. I have tried both ROM updates on 2 separate computers and I get same error messages on both computers. I have searched the Wiki's but have found nothing, so please help. As you can tell, I am a virgin to ROM updates so please go gently.
I should add, my present ver. ROM AKU 2.3 (1.34.502.7018.01H) SPL 1.06 IPL 1.01. Radio is 1.16.
have you taken a look at my Safe WM5 Upgrade Guide??
If you follow this guide EXACTLY, you should be fine.
mrvanx said:
have you taken a look at my Safe WM5 Upgrade Guide??
If you follow this guide EXACTLY, you should be fine.
Click to expand...
Click to collapse
I have, I have even tried the mtty "fix" but I had problems with that as well. I get a modem connection screen but there is nothing about a USB connection.
Bit more info would be nice, which ROM are downloading, and where from??
Also what procedure are you doing to update?? EXACT info please.
mrvanx said:
have you taken a look at my Safe WM5 Upgrade Guide??
If you follow this guide EXACTLY, you should be fine.
Click to expand...
Click to collapse
Ok, I just tried it 2 more times, Hard-SPL. It flashes to the 8525 and goes into bootloader and shows the following "HERM100 IPL-SSPL by Des HERM100 SPL-1.09.ds" at this point activesync 4.5 shuts down the 8525 is stuck in bootloader (it never reboots) and after a few minutes I get "Error [260] Upated Error". Hard SPL shuts down and the 8525 is stuck in bootloader mode. At this point I have been disconnecting the USB cable and doing a soft reset, once the phone is on, I go into bootloader and the old info shows up SPL 1.06 and IPL 1.01.
Let me have a think, firstly do you have the latest versions of the .net framework installed?
I was able to finally run HardSPLv7, I had to do it on another computer. Now, I would like to update to RUU_Hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe. I assume I should use the same computer that I used to successfully run HardSPL. Do I need to rebuild the rom file with RUUWrapper.exe (CustomRUU by olipro) & Dutty's Good NBH Tool, before running the RUU_Hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe update?
mrvanx said:
Let me have a think, firstly do you have the latest versions of the .net framework installed?
Click to expand...
Click to collapse
I have .Net 1 thru 3.5 (pre-release) installed on the computer that I can not get to run any ROM updates.
9
compudds said:
I was able to finally run HardSPLv7, I had to do it on another computer. Now, I would like to update to RUU_Hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe. I assume I should use the same computer that I used to successfully run HardSPL. Do I need to rebuild the rom file with RUUWrapper.exe (CustomRUU by olipro) & Dutty's Good NBH Tool, before running the RUU_Hermes_CINGULAR_WWE_2.15.502.3_6275_1.40.30.00_108_Ship.exe update?
Click to expand...
Click to collapse
Yes if you carry on the guide past flashing hardspl you will get the radio updated aswell.
Can i ask, what is different on the computer you used???
mrvanx said:
Yes if you carry on the guide past flashing hardspl you will get the radio updated aswell.
Can i ask, what is different on the computer you used???
Click to expand...
Click to collapse
Off hand, the major difference would be Intel (worked) vs. AMD (failed) but I doubt that is the problem, you would be flooded with questions due to so many computers that have AMD chips. The USB cable was the same as well. I'll have to think about that...
Definatly check your "failed" computer is up to date with .net and everything else, most likely a software problem.
I have this problem as well..
AT&T 8525 windows moble 6 trying to install the hardspl v7.
v3.5 and 3.0 .net framework.
the RUUwrapper program gets to the 'verifiying info' screen then give me an erroe 240 message. 'the update utility can not open the requested file.'
any help would be great. Looking to add the touch it interface.
thanks,
Mike
Read the post Hard SPL at the top of this forum and go to page 116 ( I believe its post #1160) and use the sd card method. You don't need to use the pc at all. I generally flasah ALL os's using the sd card method as it seems to be safer then using the usb method. No "sync errors" to deal with.
Cheers...
I have the exact same problem..
When it goes to tri-color screen, the USB connection goes off and windows will pop up the search for driver dialogue box.. then afterward another dialogue box will appear saying Error [260].
I tried restarting my pc and device (even removing the battery) but still failure
Any help would be highly appreciated. Thanks.
blackphnx said:
I have the exact same problem..
When it goes to tri-color screen, the USB connection goes off and windows will pop up the search for driver dialogue box.. then afterward another dialogue box will appear saying Error [260].
I tried restarting my pc and device (even removing the battery) but still failure
Any help would be highly appreciated. Thanks.
Click to expand...
Click to collapse
I loaded it thru the sd card just as the post above suggested. It loaded the hardspl just fine. My PPC seems to run faster as well.
Thanks for the help! it is much appreciated.
blackphnx said:
I have the exact same problem..
When it goes to tri-color screen, the USB connection goes off and windows will pop up the search for driver dialogue box.. then afterward another dialogue box will appear saying Error [260].
I tried restarting my pc and device (even removing the battery) but still failure
Any help would be highly appreciated. Thanks.
Click to expand...
Click to collapse
One thing that i have learned from flashing my 8525 is to remove any USB device except the 8525. This has worked for me.
swimmy said:
One thing that i have learned from flashing my 8525 is to remove any USB device except the 8525. This has worked for me.
Click to expand...
Click to collapse
But my mouse is on USB. I might try on different computer and post back the results.
UPDATE
I tried using my friend's laptop and it installed without a problem. I think the issue is with the .NET framework. I installed the latest one before flashing and it worked fine. Hmmm.. Im not sure about this tho.
Hello.... Try the sd card method. You don't need the computer...
Sorry if I sound condescending, but, I seem to find a lot of people saying that they have sync problems. Solution, Take the pc out of the equation (except to load files onto sd card). It is SOOO much safer then using the pc, no "sync" problems, no chance of usb being disconnected, reset button being hit or , worst case scenario, power failure...
You have to either have little or no battery power or MANUALLY hit the reset button with the stylus to stop the flash...
And thats my 2 cents....
Refer to post #13 to find out how to use sd card method to flash hard spl...
Cheers...
sd card method???
how?
Ok I have searched the forums pretty hard the last couple of days, and I have not found anyone that has the same issue as mine. It's not too big of a deal as everything operates but it is an issue all the same. This is all of course after I have succesfully ran HARD SPL v7 and upgraded to Black 3.0.1. Basically I decided to use POF's SuperCid Unlocker 3a (yes I know if I had HARD SPL 7 then why go through the trouble of Unlocking my CID, let's call it a need to mess with things) and everything went succesful. Then after the fact I read that it is still good even if you have SuperCID to upgrade the SPL to 2.10 and have read some peoples signatures and it appears that they have succesfully done this. Here is my issue;
When I run the CustomRUU it autodetects my SPL no problems, HARD-SPL? is checked, everything seems to go fine until it gets to the boot loader, once it is there, the progress bar pops up, zings to 100% and then reboots, cool? no because it didn't actually upgrade anything everything is still the same. Ok, so I tried the format SD card and rename *.nbh file to HERMIMG.nbh and put only it on the card, when I go to bootloader it does a quick flash to the screen like it recognizes the image but then goes to boot loader and nothing changes (the flash is so quick I can't even read whatever message it may be showing). I have tried pretty much every flashing method I can come across. MTTY wont recognize that I even have a USB port so I have been unable to try that method. So two questions:
I have SuperCID, so should I continue to even bother to get to 2.10?
If so, is there anything else I can try? Or do I need to get MTTY to work and try that as that is really the only thing left?
Thanks for any and all help anyone can provide.
PuckX said:
Ok I have searched the forums pretty hard the last couple of days, and I have not found anyone that has the same issue as mine. It's not too big of a deal as everything operates but it is an issue all the same. This is all of course after I have succesfully ran HARD SPL v7 and upgraded to Black 3.0.1. Basically I decided to use POF's SuperCid Unlocker 3a (yes I know if I had HARD SPL 7 then why go through the trouble of Unlocking my CID, let's call it a need to mess with things) and everything went succesful. Then after the fact I read that it is still good even if you have SuperCID to upgrade the SPL to 2.10 and have read some peoples signatures and it appears that they have succesfully done this. Here is my issue;
When I run the CustomRUU it autodetects my SPL no problems, HARD-SPL? is checked, everything seems to go fine until it gets to the boot loader, once it is there, the progress bar pops up, zings to 100% and then reboots, cool? no because it didn't actually upgrade anything everything is still the same. Ok, so I tried the format SD card and rename *.nbh file to HERMIMG.nbh and put only it on the card, when I go to bootloader it does a quick flash to the screen like it recognizes the image but then goes to boot loader and nothing changes (the flash is so quick I can't even read whatever message it may be showing). I have tried pretty much every flashing method I can come across. MTTY wont recognize that I even have a USB port so I have been unable to try that method. So two questions:
I have SuperCID, so should I continue to even bother to get to 2.10?
If so, is there anything else I can try? Or do I need to get MTTY to work and try that as that is really the only thing left?
Thanks for any and all help anyone can provide.
Click to expand...
Click to collapse
Did you look on the bootloader screen to see if your SPL changed? To my knowledge the only place you can see it is in the bootloader screen (tri-color screen) And flashing Olipro's Hard SPL only takes a couple seconds so it sounds to me like it is working as designed.
Or are you trying to flash a different rom? If so then try deleting everything you have in the directory you are using and re-downloading. You might have over-written the file you want to flash with the HardSPL one. You shouldn't be using the hard spl wrapper to flash a rom in any case, i believe that is mentioned in bold at the top of the Hard SPL thread.
Ok nevermind I was able to get it to work and MTTY was the answer. This is the 2 steps I had to follow:
From the thread: http://forum.xda-developers.com/showthread.php?t=291723
sp3dev said:
Hi. I`ve finally found the way to connect mtty and run rom update utility in Vista. tested on rtm 6000.
First of all, connect your device when it`s in bootloader.
next, open Windows Mobile Device Center and in connection settings uncheck Allou USB Connections.
next, goto contol panel-administrative tools-services and start windows mobile device connectivity and windows mobile device 2003 connectivity
next, goto device manager and find your device and update the driver to the one from AS 4, i attached it, wceusbsh.inf.
then, kill wmdc.exe with any taskmanager
You are Ready. run ruu or connect MTTY. I guess that vista default driver uses another port, not WCEUSBSH001, that`s why we have to use the old driver.
Click to expand...
Click to collapse
Then Do This:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootloaderMFG
Flashing SPL-1.01 MFG instructions
Put hermes in bootloader mode (side ok + power button + softreset)
Connect Hermes to computer using USB cable.
Open mtty.exe, select "USB" from the dialog box, then hit Ok.
Hit enter twice and you'll see the "USB>" prompt.
Then type these commands: (note the use of 'lnb*s*')
USB>task 32
Level = 0
USB> lnbs SPL-1.01.nbs 50020000
USB> task 8
Device will reboot after this, with bootloader 1.01-MFG on it.
Once I was able to do all this I was succesfully at 1.01 at which point I ran the Custom RUU and upgrade to 2.10 without issue. Once again all right there in the forums, just had to be pieced together to find a solution.
Thank you all for all your dedication to these projects, you make owning a PDA more fun than I am sure was originally intended. I love messing with things.
I have also attached the necessary files from the original posts to perform this for anyone else facing this issue.
PuckX said:
Ok nevermind I was able to get it to work and MTTY was the answer.
Click to expand...
Click to collapse
Cool, glad you got it working
Ok...I have been through all the posts about upgrading etc. I still have a problem and I'm sure that I'm overlooking something....but I can't figure it out on my own. Here is what is happening (it does the same thing with every RUU that I've used...the DST fix...upgrading to WM6....etc)
1. I run the RUU and let it go through its routine (extract files, verify info on pc, etc.)
2. I check the box that says I have read the readme and click next
3. The next screen appears and it has the following steps:
Connect to the USB cable (check)
Establish an ActiveSync Connection (check)
Disable standby and hibernation on PC (check)
Make sure batter is > 50% (check)
Then I check the box and click next
4. I pick the update and click on the update button
5. I verify that I want to upgrade my phone from ROM verion x.xx.xxx to x.xx.xxx and click next
6. The program tells me that I am finally ready to update...and if I am sure I want to proceed to click next...so I click next
7. As soon as I click next...the progress bar comes up on my pc and my phone goes into standby mode (no bootloader...just standby). The progress bar never moves.
8. After a minute or two the RUU give me the ERROR [260]: Connection
9. I reboot my device and repeat steps 1-8
10. I reboot my device and my computer and repeat steps 1 - 8.
Now if I leave my device connected to the usb and close out the RUU after it gives me the ERROR [260], and then run the RUU again...when it is first verifying the information on my pc (before it asks any questions and before it tells me to connect my device) it will throw the device into bootloader mode. If I try to keep running the RUU while the device is in bootloader mode it give me the error that my device is not connected. I have tried and tried...maybe one of ya'll can help me. Thanks in advance
Chris
Some questions:
.) Is your desktop PC running XP or Vista?
If you have a firewall running, close it.
.) If you running Vista check this guide:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
.) What updates did you try to flash?
.) Did you install Olipros bootloader first?
gerald_s said:
Some questions:
.) Is your desktop PC running XP or Vista?
If you have a firewall running, close it.
.) If you running Vista check this guide:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
.) What updates did you try to flash?
.) Did you install Olipros bootloader first?
Click to expand...
Click to collapse
XP
No firewall
I tried to flash the WM6 from AT&T I assume its beta
and no did not install the Olipros bootloader
Ok...I think I found out how to do this...Ya'll can tell me if I'm screwing something up.
I go through all the steps listed above until it gets to the progress screen. When it gets there I manually put the the device in bootloader mode (Power, side ok, and reset). Once I do this...the progress bar starts moving. I will let you know if this works...
Hmmmm
Its not the way it should work but if it works its ok
You should have installed Olipros HardSPL first and then try to flash an official rom. If its working then something with your download is wrong.
What ROM is on there now?
Has the phone been CID unlocked?
Oli's CustomRUU is better, you may want to unpack the ROM and put the NBH in a folder with Oli's RUU and then do the upgrade.
BTW, gerald_s is right, you should not have to do that... what you may want to do is put the phone in Bootloader mode manually (while not connected to the PC), then plug in the USB, then start the RUU. That helps some people with 260 error.
I've got the same damn issue... it's driving me crazy. I had this occur when I flashed my Hermes100 from the stock version to Custel's. After about 15 starts and reboots it took. I'm now trying to get to Vp3G's 3.60 and it continues to give me the 260 error.
I am trying to figure out how to fomat my micro, but really hoping to find a solution over cable.
Hermes 100
IPL 1.04
SPL - 2.10 Olipro
Any suggestions?
You may be trying to flash a rom that includes the radio rom. What is your device? Is it possible that your device is a new x01ht with radio 1.14 and radio bootloader 0182? If yes, then you will get this error when you try to flash a rom with this method because during the flash it will be disconnected by the radio bootloader because it is not overwriteable. If you flash using the NBH file on the microSD, it will skip past radio and radio boot and just flash the other parts of the file.
mikebraeuer said:
I've got the same damn issue... it's driving me crazy. I had this occur when I flashed my Hermes100 from the stock version to Custel's. After about 15 starts and reboots it took. I'm now trying to get to Vp3G's 3.60 and it continues to give me the 260 error.
I am trying to figure out how to fomat my micro, but really hoping to find a solution over cable.
Hermes 100
IPL 1.04
SPL - 2.10 Olipro
Any suggestions?
Click to expand...
Click to collapse
If you are running windows XP, just connect the card to the computer, open MY COMPUTER, right-click the removable disk that is your microSD and then click format. Default in windows xp is to format using FAT32 filesystem which is perfect.
The thing is... if you dont know how to format a drive in Windows, should you be flashing your device yourself?
Which Solution???
I've got a Softbank X01HT with:
S/N: HT639
SuperCID <--- result of checking by mtty
IPL: 1.04
SPL: 2.10Olipro
GSM: 1.47.00.10
OS: 3.54.07 WWE
I tried to flash with new Schap 3.54c but the process would not be done coz ERROR 262 or ERROR 302. Fortunately, after failure of flashing, my device is still normal running. Then I tried to flash radio 1.51.00.10 but I got the same above. Once again, I have just tried to flash splash screen and I got the same result too. It mean my device can not upgrade anything !
Anybody here show me a solution that help my device to become a normal device, I mean it will be able to flash anything ROM as it would be! Don't tell me READ and READ, I had read so much . And don't tell me use MTTY again SPL1.01MFG, I think that is a final solution
Wantoknow said:
I've got a Softbank X01HT with:
S/N: HT639
SuperCID <--- result of checking by mtty
IPL: 1.04
SPL: 2.10Olipro
GSM: 1.47.00.10
OS: 3.54.07 WWE
I tried to flash with new Schap 3.54c but the process would not be done coz ERROR 262 or ERROR 302. Fortunately, after failure of flashing, my device is still normal running. Then I tried to flash radio 1.51.00.10 but I got the same above. Once again, I have just tried to flash splash screen and I got the same result too. It mean my device can not upgrade anything !
Anybody here show me a solution that help my device to become a normal device, I mean it will be able to flash anything ROM as it would be! Don't tell me READ and READ, I had read so much . And don't tell me use MTTY again SPL1.01MFG, I think that is a final solution
Click to expand...
Click to collapse
Have you tried flashing with your microSD?
Kevbodian said:
Have you tried flashing with your microSD?
Click to expand...
Click to collapse
I forgot to tell that, I had flashed through extra memory card yet, and could be done!
But I wanna flash ROM against CustomRUU through MS Active Sync as I had used before. Can you help me
i have a problem very similar to Chris. when i check the box "yes activesync is syncronised", and then the progressbar shows up and the phone goes into standby.
i've turned standby of in powermanagement options.
my os is XP
i use active sync v4.5
and this is first time i try this.
i've read something about this bootloader, i can get there but then i cannot sync with active sync. so i kinda stuck.
have been searching the forums and this was the same problem as mine but i don't understand your solutions.
//KufrA
--Problem solved--
i did all things without activesync,
1. start phone in bootloader
2. do the install
3. wait 0% to 100%, and done.
is there a problem with active sync or why do i have to do anything with it at all?
I have a VZW HTC6800 and I need to get the SPL 2.40 on the device so I can move forward. I get to the point where it ask for the disconnect/reconnect but on the reconnect I cannot get it to see ActiveSYnc. I have searched for an answer and cannot find one. What danger would I have if I did not disconnect and continue will I still get the 2.40?
parcou said:
I have a VZW HTC6800 and I need to get the SPL 2.40 on the device so I can move forward. I get to the point where it ask for the disconnect/reconnect but on the reconnect I cannot get it to see ActiveSYnc. I have searched for an answer and cannot find one. What danger would I have if I did not disconnect and continue will I still get the 2.40?
Click to expand...
Click to collapse
you can make sure you got 2.40 correctly, by manually entering bootloader. (power+camera+reset) if it says that you have 2.40, then you got it. so you can proceed, if not then go back and try again to make sure you get it
I have a VZW HTC6800 and I need to get the SPL 2.40 on the device so I can move forward. I get to the point where it ask for the disconnect/reconnect but on the reconnect I cannot get it to see ActiveSYnc. I have searched for an answer and cannot find one. What danger would I have if I did not disconnect and continue will I still get the 2.40?
Click to expand...
Click to collapse
You're not supposed to see activesync at that stage. Disconnect and reconnect, and continue with the process.
Make sure also that you HEAR the tones that acompany the disconnect and connect... You will hear tones.... On disconnect you will hear tones that decend, and on connect they will ascend....
gbenj said:
you can make sure you got 2.40 correctly, by manually entering bootloader. (power+camera+reset) if it says that you have 2.40, then you got it. so you can proceed, if not then go back and try again to make sure you get it
Click to expand...
Click to collapse
OK...will try again...when I disconnect then reconnect this is done in the DOS window. After that I do I do hit continue and the RUU I guess you would call it comes up. In that procedure it request that an active sync connect be made and this is where I have been for hours trying to get it to connect. If I never disconnected in DOS I would be OK but I know this is required...
Oh well...must mean I do not need it...
OK...will try again...when I disconnect then reconnect this is done in the DOS window. After that I do I do hit continue and the RUU I guess you would call it comes up. In that procedure it request that an active sync connect be made and this is where I have been for hours trying to get it to connect. If I never disconnected in DOS I would be OK but I know this is required...
Oh well...must mean I do not need it...
Click to expand...
Click to collapse
Yeah it's fine...just keep going...as long as when you reconnect, at the bottom of the bootloader screen it says USB and not Serial, then you're fine.
Thx...that info did help...
For any newbies like me this might help. I followed the instructions hanging off each word for each step. One the SPL update entering into the Windows GUI and I attempting over & over to connect to active sync because the instructions state to do so before checking the box. Maybe it was dumb of me but I never saw it stated to ignore that step from WiKi page...so hope that helps someone down the road.
Pros...now that I am updated is it safe to add tweaking apps like tweaks2k2 or Pocket Toolman. I am sure some reg hacks are added but do not want to cross up anything with the new 312 rom? Please advise?
I have vista64 is there a way to install the spl using vista64 or the sd card
When I posted this I was on the 2.40 boot loader but now I am on the 2.47. This loader is loaded from the SD card so all the trouble I posted you will not see. Sorry I do not have the link but do a search for the 2.47 you will see it and how to load it off a SD card.
i really need help,
i started off connected to activesync but thn im getting error saying pput.exe is being used by something else now i have colored screen with TITA100 and SPL-1.30.Olipro
i dont know what to doo, please someone help, new in these filed.
Thank you
EDITED: got it working... sorry
Thx
my turn
I am trying this on my old 6800 ( broke rubber power button) before I do new one.
I am on Verizon, don't care about GPS, running STB but really like features on 6.5. I have read everything I can find and still confused. Do I need to change anything if all I want is 6.5?
Also, when asked to plug and unplug usb, I get tones remove and replug, but then I get connection error and stay in 3 color spl-2.40
Thanks...
Jerry
stuck in bootloader 1.20
i tried to upgrade my daughter's Titan, firmware 1.4 so fsirly old, no gps. When I started the phone hooked up fine with Mobile Device Center. I ran Olipro 1.2 fine did the unplug and replug fine and got success message. Then couldn't restart the phone and now it won't connect through Device Center, so nothing else will run. Wanted to run Olipro 2.40 and then flash a GPS enabled rom and radio.
I have read everything I can find on here, but without a connection thru Device Center I am stuck.
Have I bricked the phone?
Ok got the phone working again with extbl.
Thank for listening.
Hi Folks,
I'm stuck in the tri-color screen for bootloader 1.06.
I have DCD 3.2.0 w/3.42.02 radio on the XV6800 and was trying to upgrade to radio 3.42.30. My system is Vista 32-bit.
I ran the Titan Relocker and it put SPL-1.06.0000 back onto the device and was planning on then putting 1.2 onto it.
Running titan_exitbl.exe says "Cannot open USB port. Please make sure, that USB connection in ActiveSync is disabled."
Unfortunately it is now stuck and even after ending the Sync Center service I can't get titan_exitbl.exe to pull it out of the Boot Loader.
Ideas? Thank you!
I could fire up an old XP laptop and try it from there.
Loaded ActiveSync 4.5 on an XP laptop, disabled USB connections, ran titan-exebl.exe and the device is booting now.
I'll continue on and see what else I can screw up.
Loaded SPL 1.20
Loaded 3.42.30
Loaded SPL 2.40
Device is back to working! Off to see if GPS is back after being lost with 3.42.02.
titan-exebl.exe
Where can I find titan-exebl.exe? Google doesn't turn up any results other than here?
titan_exitbl.exe
Never mind... just located it on my own hard drive!
Cheers!
Stuck on Bootloader
OK... I've tried titan_exitbl.exe, and it still doesn't work.
Here's my problem in chronological order:
1. I've been having a few problems (bugs) in my current custom ROM (PPC Kitchen 3.49 version), so I decided to re-flash to a stock ROM, see if the problems were fixed, and then try to flash back to a custom ROM.
2. I tried flashing to the Sprint 3.35 ROM. The RUU showed the progress bar on both my PC and the phone. But at 0%, I got a message saying "an error has occured" - or something to that effect.
3. I decided that the error was because I was running a custom ROM, and Sprint didn't like that. So I ran the Titan Relocker utility, thinking this would cure the problem.
4. I followed the steps on the screen and then got a message saying the relocker utility had completed successfully. The phone rebooted and went into the tri-color bootloader mode.
5. I retried the Sprint 3.35 ROM update, but got the same connection error, and the progress slider would never move from 0%.
6. I decided the phone had locked up and performed a reset with the stylus. The phone rebooted and went back into bootloader mode. The screen shows "TITA100 SPL-1.06.0000"
7. And that's as far as I've gotten. I've tried several hard resets using the buttons and the stylus together. I've tried removing the battery and reinstalliong... but the phone just goes back into bootloader mode.
I've tried both titan_exitbl.exe and UNI_Exitbootloader.exe, and neither utility seems to help. I get a message saying that "All data was sent... the phone will reboot now... please check your screen". The phone's screen blinks for a moment, and then returns to bootloader. Nothing can get it anywhere else.
I've tried different USB cables and ports. Activesync won't detect it, but the utility update software does.
When I run the Sprint 3.35 ROM update utility, I get an error at 11% saying "invalid vendor ID" and the update refuses to run. I tried to run the Titan Re-locker utility again, but it requires an ActiveSync connection. I've tried both enabling and disabling the USB connection in ActiveSync, but that seems to make no difference. The utility simply says no USB connection is available. The ROM update utilities will detect the device via USB - they just refuse to work with them.
I also tried running a DCD Tital 2.1.0 Bell ROM. The progress slider freezes at 0%, and then I get a message saying the RUU has encountered communication errors during the update. I've been through the recovery process the utiity suggests about a dozen times... it sill returns the phone to the bootloader screen.
So I'm getting pretty frustrated... does anyone have any ideas?
Try changing your spl back to 2.40.
Throwing it back into the tri color screen again and flash the sprint stock 3.35
But put it on the root of a fat32 formatted micro sd card in the flavor of under 2gb.
Just run the exe from your computer it will extract the files from the exe to some location on your computer, normally the ruu update folder.
There will be a ruu_sighned.nbh file locate it and copy it to the fat32 formatted card rename it TITAIMG.nbh
Let the phone boot into the bootloader and it should detect the file on the sd and update the rom for you, by stating loading ......
Then will prompt you to update press power key.
Sense you are not on sprint don't let the first time custimizations run ... pull battery once you get to your mobile today screen on first boot...
Use active sync or the sd method to update your rom to whatever you wanted originally.
Most full updates from carriers the ones that flash both the radio and rom will run regardless of the boot loader thats on the device.
Happy flashing
Just thought I'd toss in here that GPS does work, but I have to use GPS Viewer to get a lock on the satellites first.
softwind said:
OK... I've tried titan_exitbl.exe, and it still doesn't work.
Here's my problem in chronological order:
1. I've been having a few problems (bugs) in my current custom ROM (PPC Kitchen 3.49 version), so I decided to re-flash to a stock ROM, see if the problems were fixed, and then try to flash back to a custom ROM.
2. I tried flashing to the Sprint 3.35 ROM. The RUU showed the progress bar on both my PC and the phone. But at 0%, I got a message saying "an error has occured" - or something to that effect.
3. I decided that the error was because I was running a custom ROM, and Sprint didn't like that. So I ran the Titan Relocker utility, thinking this would cure the problem.
4. I followed the steps on the screen and then got a message saying the relocker utility had completed successfully. The phone rebooted and went into the tri-color bootloader mode.
5. I retried the Sprint 3.35 ROM update, but got the same connection error, and the progress slider would never move from 0%.
6. I decided the phone had locked up and performed a reset with the stylus. The phone rebooted and went back into bootloader mode. The screen shows "TITA100 SPL-1.06.0000"
7. And that's as far as I've gotten. I've tried several hard resets using the buttons and the stylus together. I've tried removing the battery and reinstalliong... but the phone just goes back into bootloader mode.
I've tried both titan_exitbl.exe and UNI_Exitbootloader.exe, and neither utility seems to help. I get a message saying that "All data was sent... the phone will reboot now... please check your screen". The phone's screen blinks for a moment, and then returns to bootloader. Nothing can get it anywhere else.
I've tried different USB cables and ports. Activesync won't detect it, but the utility update software does.
When I run the Sprint 3.35 ROM update utility, I get an error at 11% saying "invalid vendor ID" and the update refuses to run. I tried to run the Titan Re-locker utility again, but it requires an ActiveSync connection. I've tried both enabling and disabling the USB connection in ActiveSync, but that seems to make no difference. The utility simply says no USB connection is available. The ROM update utilities will detect the device via USB - they just refuse to work with them.
I also tried running a DCD Tital 2.1.0 Bell ROM. The progress slider freezes at 0%, and then I get a message saying the RUU has encountered communication errors during the update. I've been through the recovery process the utiity suggests about a dozen times... it sill returns the phone to the bootloader screen.
So I'm getting pretty frustrated... does anyone have any ideas?
Click to expand...
Click to collapse
please i have this problem how to fix this?
Please state your exact problem and what you did to cause it. Including all versions of rom and radio and bootloader.
drewcam888 said:
Please state your exact problem and what you did to cause it. Including all versions of rom and radio and bootloader.
Click to expand...
Click to collapse
Thanks!!! Ok, i cant remember eactly what is the v radio but i think 3.35 or 3.42 i cant remember exactly it's one of these. the SPL 1.06 Locked i cant unlocked i cant use titan_exitbl.... the SD update doesnt work stuck on loading.., i cant update from pc stuck 0% then Recovery Error help me. I My phone is bricked? Sorry for my english....
Did you try to install 2.4 unlocker?
drewcam888 said:
Did you try to install 2.4 unlocker?
Click to expand...
Click to collapse
Yes, i try from SD and nothing stuck on loading... from windows with RUU nothing 0% stuck and then UPDATE ERROR[262] now i don't know to do
2.4 doesnt use sd and it is run from a .exe. Make sure you aren't trying 2.47. Are you sure you tried this?
drewcam888 said:
2.4 doesnt use sd and it is run from a .exe. Make sure you aren't trying 2.47. Are you sure you tried this?
Click to expand...
Click to collapse
Ok, but how run from windows? If i cant connect via activesyncs the phone is on SPL mode i cant out of that and the msdos windows say "No device conected" when press enter from windows i cant unlock. Any idea? I'll try 2.47 but how run from windows with the phone en SPL Mode?
Please read. I said run 2.4 not 2.47. Put the phone in bootloader and it should say usb at the bottom. Then run 2.4 .exe unlocker. I think it should run without using activesync. And by spl mode do you mean the phone is in the bootloader.
drewcam888 said:
Please read. I said run 2.4 not 2.47. Put the phone in bootloader and it should say usb at the bottom. Then run 2.4 .exe unlocker. I think it should run without using activesync. And by spl mode do you mean the phone is in the bootloader.
Click to expand...
Click to collapse
Look i cant run Hard-SPL-MFG (Olipro 2.40 Unlocker) because when i run the Bat Or MSDOS Windows say "No device connect" question me if i want retray copy the file.
Ok so i guess it needs activesync. About your only option is to install a pregps rom so the phone will boot and then you can reflash the custom rom. Below is a pregps Verizon rom and radio that will work for 1.06 bootloader. Called rom 2.09.
http://forum.ppcgeeks.com/showpost.php?p=834294&postcount=4
drewcam888 said:
Ok so i guess it needs activesync. About your only option is to install a pregps rom so the phone will boot and then you can reflash the custom rom. Below is a pregps Verizon rom and radio that will work for 1.06 bootloader. Called rom 2.09.
http://forum.ppcgeeks.com/showpost.php?p=834294&postcount=4
Click to expand...
Click to collapse
No luck, method A SD Card Loading.. then cheking... then show a number corner 00028002 and say down Not allowed.
Method B, via PC and RUU then ERROR INVALID VENDOR ID.
Any idea? Thanks bro.
I think my phone is bricked... noway load the rom... i've tried load bootloader unlocked via SD last option and nothing!! damn this is so