sorry for my silly question .i want to my wm5 change into wm6 crossbow rom what shall i do or what i need to flash my g4 wizard.i tried for sevral times and i did all steps correctly but always i get error240 after cooking...thank for answer
ipl 21.0001
spl 21.0001
CID also unlocked? and then you must the rom flashing.
Read the sticky in G4 section
You have the same ipl/spl as me
My third posting on XDA
Related
hi guys.i need your information.some people say before u flash your phone with any custom rom get the clean system with tmobile 2.26.i have i mate kjam.its g4 and cid unlock..can flash my phone t-mobile offical 2.26 rom.because i am not sure that offical rom is g4 or g3.i dont wanna brick my phone.thanks your information and help
Don't flash T-Mobile 2.26 on a G4.... It contains IPL/SPL and will brick your device!
thank u
thanks for your valuable information my friend.so people are giving me wrong advice.what should i do? how can i get right rom and latest ipl/spl for my imate kjam to make my system clean?maybe from xxx.clubimate.com ?thanks your help my friend.thank u
You should read allot before flashing your device, make sure you know what your doing when flashing the first time. You cannot touch/upgrade IPL/SPL on a G4, but it isn't necessary! You can still flash new roms into it. Start here:
http://forum.xda-developers.com/showthread.php?t=298613
You also tell your G4 is CID-unlocked. Have you payed for it at imei-check? If not.... it's still CID-locked! There's a difference between SIM and CID-lock.
g4 kjam and cid unlock
yes.i paid to imeicheck.co.uk.i am sure my kjam all ready cid unlock.because this is not first to flash my kjam.i flashed before.(orginal kjam rom to faria 3.3 than to wm6 mb edition than to faria wm6 realthing than to x-plore 1.1 and now i am using faria wm5 3.3 4mb page pool)...now i am not sure how clean my kjam is?if ipl/spl update is not necassarly which you sais it's ok no problem.but i have some problem with my phone,i tried almost all task managers,i couldn't get good performance.i am having freezing problem.memory leaking problem etc...i thought maybe i must flash my phone some offical phone,but u said u cant use t.mobile or other...imate offical rom is very old version and useless and too slow..now i dont know what must i do?what should i do?thanks your help my friend.
I see! It is possible to got back to an official rom by recooking the rom without IPL/SPL. Here is explained how to do this:
http://forum.xda-developers.com/showthread.php?t=271043
thank you
Through research of different posts I have determined that I have a CID unlocked G4 model. I have a Qtek 9100 with MW 5:
Ipl 2.17.0001
Spl 2.17.0001
Gsm 02.07.10
Os 2.17.7.2
I was hoping to find an easy way to upgrade to WM6 and install the new touch applications. Does any one have any suggestions on which WM6 rom to install. Everything on my wizard is original programming except I have added PHM registry editor.
Your help is much apprectiated
There is no easy way... Are you sure your G4 is CID Unlocked? ALL G4 are locked in factory and the only way to unlock them is via imei-check website. You can use ShellTool to flash any WM6 here in the forum (I recommend NBD 7.4 for the touchflo apps).
As soon as you keep a copy of manufacturer RUU for your Wizard, you can flash any ROM you like using shelltool (Unlocking not required, but never using RUU to flash unless it is a manufacturer RUU)
dferreira said:
There is no easy way... Are you sure your G4 is CID Unlocked? ALL G4 are locked in factory and the only way to unlock them is via imei-check website. You can use ShellTool to flash any WM6 here in the forum (I recommend NBD 7.4 for the touchflo apps).
Click to expand...
Click to collapse
Actually...All Wizard are locked in factory
Hi,
Is it always necessary to cid unlock a device (G4) for WM6 flashing?
Because I read that there is currently no way doing this for free... or?
Thanks.
Megabug said:
Hi,
Is it always necessary to cid unlock a device (G4) for WM6 flashing?
Because I read that there is currently no way doing this for free... or?
Thanks.
Click to expand...
Click to collapse
Read the wiki at first. You don´t have to unlock for flashing, but to downgrade your prophet to a special version. Then you can flash some of the versions you prefer.
Schaeferreiner said:
Read the wiki at first. You don´t have to unlock for flashing, but to downgrade your prophet to a special version. Then you can flash some of the versions you prefer.
Click to expand...
Click to collapse
CID lock has nothing to do with the OS. you can upgrade/downgrade your OS with CID lock phone. on the other hand you can not dowgrade your IPL/SPL if your phone is CID lock. ( don't change IPL/SPL if you don't know what they are)
Yes, before I can upgrade to WM6 it should be AKU2.2 ... Which software version is it when I look at device information?
so, if i have a g4 model with wm5, can i upgrade with the PDAViet 4.0.0.0.6 Touch? i've been reading wiki, but... there are always some kind of a fear to do the things for the first time...
thank's wiki's masters!
Hello!
I'm very unsure how I can update my G4 CID looked.
1. Which updateway is recommendable?
2. Can I use all Prophet Roms?
greetz Ben
Can everybody help me please?
I'm still waiting for an answer!
look in the xda-wiki ... you found the right discription.
Not Realy! I have read the wiki and all usefull threads 2 days before!
1. There are different updateways in different foren, threads and wikis and all are for G3. Some users, which have a G4 model write that you have to notice a few points, but the answers are not very clearly.
2. In the german XDA forum they tell me that I can use every prophet rom! BUT: In the wiki is written that the G3 and G4 devices have different hardware! So it is very illegitimate that I can use the same rom!
Please help me! In my statement you can see that I'm very careful because I don't want to brick it!
no you haven't,as i see !
Do you think that I'm lying? Maybe I'm blind or stupid!
1. I don't want that you tell me the updateway. A link to the tutorial which you use / would use will be ok!
2. I can see that you has a normal prophet rom. So I think that the answer is YES?
I've got the same problem. This forum is great, no doubt, but it's a MESS. I couldn't find a clear answer regarding flashing a CID LOCKED G4 Prophet.
Can I flash radio roms ? What about extrom ? Can I just flash Gullums Touch VII right away after flashing NVID rom from here http://forum.xda-developers.com/showthread.php?t=310452 ? Can I even flash this NVID rom to CID LOCKED G4 ?
Lots of questions and for every one I can find 20 different answers, so I'm pretty confused. Maybe someone with the patience can clarify all of that, we don't want to brick our precious Prophets.
Juhuu! A further confused man!
So let's collect our incomplete knowledge together!
I read about a tool, shelltool with it you can update a CID locked device!
http://forum.xda-developers.com/showthread.php?t=293480
I'm reading the full thread at the moment!
My rom question is still open! If I find an answer I update my device with the shelltool!
greetz Ben
OK i see your Problem!
You can Flash all Roms with the NVID Flashtool. You can only Flash Roms with this tool, if no IPL and SPL is included! WM6 Roms use too ways to Flash it. Read the Threads about this WM6 Roms ... you need only to start the Update.bat or simulare bat file ... possible a NVID Flashtool. Some Roms have two bat files for G3 or G4 Device. Use the right! Radio Roms use everytime the NVID Flashtool and work everytime with locked devices.
You dont need the Shelltool way ... this is more Hardcore for develope.
Tank you very much for your answer!
In fact:
-I can flash every prophet rom which has a G4 bat?!
-I can flash every prophet Rom which has no IPL, SPL with NVID flashtool?
My G4 runs WM6 now!
After again 5 hours investigation I know that you CAN'T kill your device with the prophet roms! When all people say "the device is bricked" they don't mean that nothing happens! They say "bricked" if the ppc stuck on the SPL/ISP screen or the bootloader. And both can be fixed with a RUU update like Prophet_PV_Temp or the original O2 rom!
Frtzrwk:
I upgraded to PDAVIET Touch 4.0.0.6!
You can get the link to both RARs in the thread.
First: Prophet_PV_Temp
For Up/Downgrading to Aku 2.2 (WM5)
Second: PV_4.0.0.0.6_Touch
The Real WM6 Rom
-Download and extract!
-Start "ROMUpdateUtility_NV_G4", which install Aku2.2
#wait 10 minutes, your ppc restart automatically
-After the PPC is fully started, you install first "Cert_SPCS" and then "EnableRapi" (you can find the two files in PV_4.0.0.0.6_Touch)
#wait 1 minute and restart your device
-Now you can update your Rom with "Upgrade_Rom"
#wait ~15 minutes
-Hardreset your device! IMPORTANT!!!
Welcome to your new WM6 installation!
If your device stuck at the ISP/SPL screen (loading more than ~5 minutes), go into bootloader (camera + reset) and start again with upgrading to Aku2.2
greetz Benne
This was all in the wiki
See http://wiki.xda-developers.com/index.php?pagename=HTC_Prophet
then
WM6 Upgrade Guide
http://forum.xda-developers.com/showpost.php?p=1296235&postcount=1
And your device can go to heaven when your flashing the wrong rom to a wrong device...
The answer was for Frtzrwk because he is confused too!
So shut the **** up...
I don't think so! Were is written in the f**k wiki that I can use ALL prophet roms!
There is olny one information about G4:
It is not possible to upgrade from a G3 model to a G4 model through software, as the DOC is a piece of Hardware.
Click to expand...
Click to collapse
So the hardware is not the same!
And by the way: I hate rapidshare... test the links!
And when everybody flash a trium rom or another **** rom they shouldn't buy a PPC!
I don't care!
friendly greetz Ben!
P.S. Many thanks to NetrunnerAT for the only usefull answer in this thread and to gullum for his fileservice + great rom!
yes
ok new menber
Ihave o2 mini uprom die
What? I can't understand you!
Hi,
I´ve an HTC Wizzard / T-Mobile MDA and i think AKU 3 was installes.
The bootscreen say :
IPL : 3.08.0001
SPL : 3.08.0001
GSM : 02.69.11
OS : 3.8.2.2
Is ist possible to upgrade the Rom to any custom Firmware?
I´ve found that this is an G4 phone but im not sure it´s possible to upgrade.
Maybe you can tell me it´s possible or not.
I hope my eglish is good enough so that somebody understand what i mean.
yes, you can
o0opaniko0o said:
Hi,
I´ve an HTC Wizzard / T-Mobile MDA and i think AKU 3 was installes.
The bootscreen say :
IPL : 3.08.0001
SPL : 3.08.0001
GSM : 02.69.11
OS : 3.8.2.2
Is ist possible to upgrade the Rom to any custom Firmware?
I´ve found that this is an G4 phone but im not sure it´s possible to upgrade.
Maybe you can tell me it´s possible or not.
I hope my eglish is good enough so that somebody understand what i mean.
Click to expand...
Click to collapse
hi, yes, you can flash a new rom, but first of all, read , read, read and then read again, the process is very simple once you have readed the faqs (stickies)
good luck !!!1
Thanx for your answer!
I´ve read the Wiki and the sticky´s in this forum, i´ve searcht for my IPL/SPL Build and read this topics too.
But i´m unsure.
In the past (when the Wizard was new for me) i´ve read that the IPL/SPL 3.08.0001 (AKU3) wasn´t possible to upgrade .
Now i can´t find anything about that but i´m unsure.
Then i´ve read about Soft an HardSPL Flash but what is the best for me?
I´ve read that SoftSPL was better if you have warranty on your phone but my phone havent any warranty because it´s to old.
Should i use HardSPL to permanently remove the CID lock (then i should use only G4Save Rom´s - Right?)?
So Steps i want to do now to upgrade my Wizard :
1 . G4 Hard SPl CID unlock
[Solution] G4 Hard SPL (CID unlock)
But this tutorial say´s (After reboot the IPL version is : 2.21.0001 and the SPL is 2.21.olip) can the IPL 2.21.0001 boot the "old" AKU3 T-Mobile Germany Rom or must i update the rom with Mun's RUU imediatly?
2. I Update the rom with Mun's RUU after i´ve read this ROM Features, Ratings, Information and Program List topic to chose the best rom for me, G4 Safe only!?
Right or have i forgot some steps?
It´s done,
i´ve read some topics again and again und then i used the SoftSPL CID unlock and flash my wizard succesfull.
Thanx!