Slow tochflo - JAMin, XDA Neo, S200 ROM Development

After using shadow te for a few weeks..now the touchflo of my device became very slow in scrolling in everywhere for no reason..what should i do to turn the speed back without hard reset? plz help

no one know a solution?

lordsinasina said:
no one know a solution?
Click to expand...
Click to collapse
Hey~~~~
You may try the tool - Kaiser Tweak (search please )
1. Find the Flo setting,
2. sensitivity,
3. Choose Normal first,
4. Exit Program, wait for 5 seconds (recommend),
5. softreset,
6. try the result, if not as good as you think,
7. then try to go for the "very high" in
the sensitivity section.
Good Luck!!
^_^

I think advanced config has some options.

nope they don't work..i do'nt have problem with sensivity..my problem is scrolling speed that is very slow

lordsinasina said:
nope they don't work..i do'nt have problem with sensivity..my problem is scrolling speed that is very slow
Click to expand...
Click to collapse
So.......
better check out your installed software ~~~~

Related

WM6 Buttons configuration (Ok and windows key)

Hi all,
Does anybody know how to change the windows and ok key with WM6? In WM6 it is not possible to change the features for these keys. There is a program Neotap, that allows, but it includes more modifications, it changes the red button. Anybody knows how is working that program or what we need to change to allow these key modification in the
Prophet 4.0.0.0.3 PDAViet rom?
Neotap?
Do you have a link to this software?
Souns interesting.
Yeah, a Download link would be really good!
it is posted in this forum:
http://forum.xda-developers.com/showthread.php?t=306610&highlight=NeoTab
I hope the link works....
The program it is quite nice, but i do not like due to the hang up button (red button) it has change the fucntionality.
The key think it is know what this program is doing in the WM6 just to be able to changed the key configuration as you like.
Does anybody know how to do it?
BR,
eresmasyahoo said:
it is posted in this forum:
http://forum.xda-developers.com/showthread.php?t=306610&highlight=NeoTab
I hope the link works....
The program it is quite nice, but i do not like due to the hang up button (red button) it has change the fucntionality.
Click to expand...
Click to collapse
Besides, it makes unusable volume switch..
Instead turning sound it scrolls for example files list or .. menu.
NeoTab is a solution for WinMenu and OK buttons, but leads in other problems
bartsam said:
Besides, it makes unusable volume switch..
Instead turning sound it scrolls for example files list or .. menu.
NeoTab is a solution for WinMenu and OK buttons, but leads in other problems
Click to expand...
Click to collapse
if there where any feedback i could optimze it for the comunity ;-)
on iexplorer fileexplorer and gsfinder and so on it scrolls
on desktop phone and tcpmp and mortplayer it change the volume ;-)
have fun
inteks
hi inteks,
what are you doing to change the buttons configuration? I am totally lost, and I am getting crazy ;p
eresmasyahoo said:
hi inteks,
what are you doing to change the buttons configuration? I am totally lost, and I am getting crazy ;p
Click to expand...
Click to collapse
take a look @ this http://www.teksoftco.com/forum/viewtopic.php?p=187
Thanks inteks... but i am still a litle bit lost
eresmasyahoo said:
Thanks inteks... but i am still a litle bit lost
Click to expand...
Click to collapse
Exactly.. me - too.
It will be perfect if someone could fix those problems

touch screen calibration?

Is there a way to calibrate the touch screen?
Thanks
d12bn said:
Is there a way to calibrate the touch screen?
Thanks
Click to expand...
Click to collapse
Menu -> Settings -> Lang&Keyboard -> Touch Input -> Text Input -> Calibration Tool
First do the "Reset Calibration" then do your own calibration is how I did it.
mrrogers1 said:
Menu -> Settings -> Lang&Keyboard -> Touch Input -> Text Input -> Calibration Tool
First do the "Reset Calibration" then do your own calibration is how I did it.
Click to expand...
Click to collapse
That's for the HTC Keyboard ONLY. THat has no effect on anything else.
And no, there is no way (or need) to calibrate the screen.
The dialog says for the tool says "Calibrate your screen for a better touch experience".
While I did not design the phone or interface, I don't know 100% either way and luckily, it can't hurt.
*If you did code the interface and know for sure, thank you. ;-)
Thanks
mrrogers1 said:
Menu -> Settings -> Lang&Keyboard -> Touch Input -> Text Input -> Calibration Tool
First do the "Reset Calibration" then do your own calibration is how I did it.
Click to expand...
Click to collapse
Thanks that's what I needed
I wish there was a way to calibrate the touch screen. Anyone else having issues where you press the top thread of SMS and it goes to the 4th one down and then it locks the screen like it's touching there so I can't press anything else? No back button, home button. Only thing that works is locking it then unlocking but sometimes you have to do that 3 to 4 times before it will stop "touching" that same spot. I haven't hard reset yet but if that doesn't work I'm going to have them replace it.
That happened to me a lot with the original evo, not as bad with this one, but it has been off a few times
What does this do? Menu > Settings > Display > G-Sensor calibration
scramer said:
What does this do? Menu > Settings > Display > G-Sensor calibration
Click to expand...
Click to collapse
Are you daft? It calibrates the G-sensor, as in the sensor that reads the G forces the phone is being exposed to.
flyingwolf said:
Are you daft? It calibrates the G-sensor, as in the sensor that reads the G forces the phone is being exposed to.
Click to expand...
Click to collapse
he he he... "daft".
I had MAJOR touch screen problems (not keyboard) and this seems to have fixed them!
Seetings > display> calibration unless thats only in the rom im using
Nevermind only an option on my rom
Sent from my PG86100 using xda premium
Nope I have the option as well. The feature is offered on most stock based roms I believe.
#Root_Hack-Mod*Always\
i am having problems using the keyboard in portrait mode.. it wont touch the p, or 0. also, it dont always catch on the sides anymore in landscape mode.. when playing games and stuff..
dgrobe2112 said:
i am having problems using the keyboard in portrait mode.. it wont touch the p, or 0. also, it dont always catch on the sides anymore in landscape mode.. when playing games and stuff..
Click to expand...
Click to collapse
It sounds like your digitizer (touchscreen interface) may be going out. Try to calibrate in the keyboard settings and then calibrate the "g" (accelerometer) sensor. If you're still having issues with p,0 put your phone in landscape mode where the home button is on top and confirm that area of the screen by pressing the comma or space bar. Good luck.
intrlude
dgrobe2112 said:
i am having problems using the keyboard in portrait mode.. it wont touch the p, or 0. also, it dont always catch on the sides anymore in landscape mode.. when playing games and stuff..
Click to expand...
Click to collapse
You might also try a Gingerbread Rom as I've noticed the accuracy to sometimes be off on ics Roms, especially near the screen edges. Or, maybe try a different keyboard.
Sent from my PG86100 using Tapatalk 2
how to calibrate keyboard on jellybean ?
i think ... calibrating touchscreen is important to....how to do that on ICS and JB ?

Touch screen Re-calibration

To the people of Turl's and Jokersax' CM9.
I have a touchscreen re-calibration app, I just tested it out and it seems to be working perfect. Don't hold me to it, but i think this is a pretty good temporary fix.
I'd love feedback, i didn't code this but after a few searches i was able to realize this is a universal fix for touchscreens that have been acting up.
Special thanks to gojimi. At least i hope.
Can you link the source please.
Cheers!
Just a question, do we actually need touch calibration after flashing cm9? Cause AFAIK, when I tried the jokersax rom, the only problem I had was app incompatibility and APN errors...
helmy96 said:
Just a question, do we actually need touch calibration after flashing cm9? Cause AFAIK, when I tried the jokersax rom, the only problem I had was app incompatibility and APN errors...
Click to expand...
Click to collapse
Sometimes, it will act up.
Ouh. Ok, didn't think it would happen... hope u don't think n
that I a newb thru this question, I'm well informed, just not very active due to sch...
helmy96 said:
Ouh. Ok, didn't think it would happen... hope u don't think n
that I a newb thru this question, I'm well informed, just not very active due to sch...
Click to expand...
Click to collapse
I know what you mean, sometimes homework takes away most of my time too. But just use CM9 as your daily driver, and you'll be well informed on any issues that will occur.
This actually screwed up my touchscreen..anyway to uninstall?
Hi,
I have a software issue with my touchscreen :
1/ Got stock ROM, then CM7, then CM7-Neutrino-2.2 => screen was OK
2/ Installed CM9-Turl-v8 => an unresponsive horizontal line appeared, around 100px high
3/ Tried to come back to CM7, CM7-Neutrino, CM9-Joker-0.4 => bug still there
4/ Tried this calibration app, but couldn't click the button because it was under the unresponsive line, so turned the phone into landscape or upside-down to execute => bug still there
5/ Flashed PDS fix => bug still there, fear of a hardware issue
6/ Installed CM9-Joker-0.5 with awesome Installer => touch screen goes totally crazy (phantom-touches), BUT the line is finally responsive !! So, le wild idea appears
7/ Retried this calibration app, this time in the right way => SCREEN FINALLY OK !!!...
8/ ... For about 2 hours... Now my phone combines 2 issues : a new horizontal line is unresponsive (thinner than the old one), and crazy phantom-touches happen really often...
I was desperate, but now I know my problem is software, I see hope ! Am I the only one to have this problem ?
Thank you in advance
David Guillot said:
Hi,
I have a software issue with my touchscreen :
1/ Got stock ROM, then CM7, then CM7-Neutrino-2.2 => screen was OK
2/ Installed CM9-Turl-v8 => an unresponsive horizontal line appeared, around 100px high
3/ Tried to come back to CM7, CM7-Neutrino, CM9-Joker-0.4 => bug still there
4/ Tried this calibration app, but couldn't click the button because it was under the unresponsive line, so turned the phone into landscape or upside-down to execute => bug still there
5/ Flashed PDS fix => bug still there, fear of a hardware issue
6/ Installed CM9-Joker-0.5 with awesome Installer => touch screen goes totally crazy (phantom-touches), BUT the line is finally responsive !! So, le wild idea appears
7/ Retried this calibration app, this time in the right way => SCREEN FINALLY OK !!!...
8/ ... For about 2 hours... Now my phone combines 2 issues : a new horizontal line is unresponsive (thinner than the old one), and crazy phantom-touches happen really often...
I was desperate, but now I know my problem is software, I see hope ! Am I the only one to have this problem ?
Thank you in advance
Click to expand...
Click to collapse
You are not the one who have this problem I had nottachtrix at first and touchscreen was working well when I instal MIUI 2.4.27 from there started my problem now my buttons sometime stop working when I bloc and then unblock phone buttons start working sometime it need restart phone I didn't try this ap yet but I think it's software because when buttons stop working my touchscreen is working full only buttons are not responsive is there some fix pleas PM me
After using nottachtrix arora installer to calibrate my touch would have random deadzones and w,e,s,z didnt work. Tried recalibrating with installer to only make it randomly worse or slightly better. This did the trick thoough. Thanks very much!!
help me
i was used gingermod rom and change to aokp milestone 6 suddenly yesterday seen that there are area in screen didnt work i have tryied to back to gingermod still not work try this software but also didnt work what i have to do please help me
hi help me
hi help me
i have one tablet eken w70 wiht the touch invsted help me
this touchRecelibrete not succes
help me
[email protected]
Can you please give us the correct way for Re calibration
Sent from my MB860 using xda app-developers app
i'll try it, my screen not responding now

Help me please!

Why my phone always lag when i port it into usb i cant choose the 3 choices: Phone management, phone update and charge phone, its because when i hit anyone on the choices it always drop down.
Why!!!!!!!!!!!!!
papapon said:
Why my phone always lag when i port it into usb i cant choose the 3 choices: Phone management, phone update and charge phone, its because when i hit anyone on the choices it always drop down.
Why!!!!!!!!!!!!!
Click to expand...
Click to collapse
Hm, first on which rom are you (stock rom?) and which phone (x10 mini, x10 mini pro, other ?) ?
Second, Have you tried to "tweak" something in a way or another ? (did you try to do anything to your devicesuch as theming ?)
Have you tried to disable the animations just to test ?
Is your sceen ok ? I mean no scratches ?
if u underclock it, dont set the cpu too low.. it also depend on kernel,rom

dimmed at online browser ?

ok so i have turned the ligt up. rahter high. ususaly. its summer and i cant see enything in it otherwise.
but the problem is when im in the browser. it get dimmed to like half or under. how to change that `?
i read alot of news online. so its rather irretating. that i hardly can read enything
i have looked everywhere......... exept the right place offcouse. hope others have found it. ??
Storkraft said:
ok so i have turned the ligt up. rahter high. ususaly. its summer and i cant see enything in it otherwise.
but the problem is when im in the browser. it get dimmed to like half or under. how to change that `?
i read alot of news online. so its rather irretating. that i hardly can read enything
i have looked everywhere......... exept the right place offcouse. hope others have found it. ??
Click to expand...
Click to collapse
Open Browser>Menu>Colours>Change to Default.
or disable "power saving" mode...
Oomahey said:
Open Browser>Menu>Colours>Change to Default.
Click to expand...
Click to collapse
thanks alot it was wery irretating.
Oomahey said:
Open Browser>Menu>Colours>Change to Default.
Click to expand...
Click to collapse
thanks alot it was wery irretating.
Thank you!!
Sent from my GT-I9300 using xda app-developers app
Please help !
My default browser screen is very dim, I do not have Browser>Menu>Colours>Change to Default in my default browser menu. And I do not have Brightness/colour settings in in the same default browser menu. I have checked all the power saving options in my settings menu and they are all disabled. The problem started after I was using the power saving option for about 6 hours. Before that everything was OK. I have tried restarting the device, clearing data and cache on the browser, nothing is working. Now I'm using Dolphin browser and the brightness is OK. I have 4.04 i9300BULG2 software version. Thanks in advance
@florio1963-Go to settings->Power saving->Background color and untick it
nexusino said:
@florio1963-Go to settings->Power saving->Background color and untick it
Click to expand...
Click to collapse
Thanks for the suggestion but as I mentioned before I have already done that. I'm just not finding the default browser brightness settings.
@florio1960-If you do not have this in Attachments tried to make unfortunately factory reset.Make backup of all data before
Use thanks button if I helped
nexusino said:
@florio1960-If you do not have this in Attachments tried to make unfortunately factory reset.Make backup of all data before
Use thanks button if I helped
Click to expand...
Click to collapse
Already done factory reset but thanks anyway ! I will wait for a software/firmware update.
@florio1960-That is likely to be fixed in new update on JB 4.1
B.R. Nexus

Categories

Resources