I`ve bricked my touch dual. now in device none CE OS (cus I`ve trying to restore device different methods)
I found original rom - french ( 2 differents rom fr) but when I try to flash it stuck in 0% upgrading and and then in few minutes ending with problem code (lost device connection).
if I try to flash other rom - it stopped in 1% with ID problem cus I didn`t make hardspl...
some propose in my case? please
PS why original rom dont flash in my device?
Using windows xp or vista?
He have a device with CID FR (French)
He havent HardSPL installed!
He have delete his OS Partition? With a Task 32!
Answer ... send it back in warrenty! Or you must wait for a Full French OEM Rom. In the moment i havent see a Rom with your CID!!! Without a Full Rom i doesnt know any way to get it back! Your device isnt realy bricked. With a recounstructed French Rom, you stuck every time on 0% -> CID invalide!
This is why you should always read the "how to" tutorials...
I have a question ... can you look on all French Provider Homepages? Possible they have released a French Nike Rom. You found a Rom ... please share it with me ... publish it!
>With a recounstructed French Rom, you stuck every time on 0% -> CID invalide!
its very pity but I`m also thinks as you...
could I flash a sspl.nb in bootloader mode using mtty? (I`m remember for Trinity was tool that make possibility to load sspl when it`s stuck in bloader )
no?
i will search for a solution ... if trinity can do ... possible nike too
hi,
I have dumped my French SFR rom on my computer (part 0 -1 -2 and 3 raw).
Maybe can i help ?
Tell me what i need to do
upload it via netrunnerat.4shared.com -> upload directory password xda
maybe, but I have a Touch Dual orange.
Cmd>boot
InitDisplay: Display_Chip=1
Fill RSVD information for block 288 to 309
TAG NOT FOUND !!! NOT CLEAR STORAGE !!!
No card inserted
OSSIPreLoad ++
OSSIPreLoad failed, CE is NONE
OEMGetUpdateMode
IPLMSG:0x2:ERROR: Failed to open storage partition.
You have kill your OS partition ... you can be lucky ... your ipl and spl work fine!
Only you can to ... warrenty repair or ask your provider for a Full Rom!! Without that ... i see no hope! If you havent a CID unlocked device ... you can only flash a FR Rom ... but i havent see a rom with this CID!!
Related
Hi guys
First of all thanks for everybody who is just reading this ...
I bought a XDA2i from Ebay (Original O2 - UK) - unlocked it via IMEI-Check - everything works as good as possible - i'am happy with my device.
ROM Version: 1.10.00 WWE
Rom date: 12/24/04
Radio Version: 1.00.00
Protocol Version: 1337.39
Extended ROM: -- (nothing mentioned)
Bootloaderversion: 1.01
But the device is taesing me when i try to update the software. I really tried now everything human possible, i have no clue how i can do the upgrade.
The offizial softare ( picked from the O2 webpage) is goin very well, its th only one i can upgrade - the other Roms doesn't work. I got Error Messages concerning countrie, ROM doesn't fit to my device, connection, bla bla ..
With the patched himalaya setup file its possible to start the ERASING of the ROM - but in the RUU Logfile i can see that the process ist stopped after 3 trials, then i have to make a softreset..
Okay i studied now this forum and a german one POCKET PC Phone , since around 2 weeks - but i found no solution. I tried to change the ROMS Operator / Language by th eROM Editor, as well i tried the HEX Editor solution nothing - my device is laughing at me - and i really get crazy..
Before starting my trials i made a ROM Image on a SD ( everything works ver well ) also i read it from SD and saved it to my pc hardrive by using the programm NTRW.
So in my opinion there must be the opportunity to get from somebody a working IMAGE !!! File ( not ROM , no nbf or the files which are already on the FTP SErver) and write it with NTRW to the SD Card - bring the device in bootloader Modus an install the ROM ??
!!!
Does anybody has a working IMAGE-FILE !! for me ( XDA2i O2 WWE) an is able to save that on the FTP.
I really would appreciate your help, but for me it seems to be the last chance to get a newer software on the device.
thanks a lot in advance
Forgive me if I've got this wrong, but which ROM are you trying to apply to the XDA2i? I've got the same phone and there isn't any official updated ROM to put on it. There is a weird kinda one sitting on the FTP but I suspect it's not complete as there isn't a Windows installer...only what appears to be files to be run from the phone itself.
None of the other ROMs on this board will work on the 2i as they're for other phones.
Cheers
Ant
I wonder why there is no ExtROM in your Andes
Ext. Rom is not installed, why during the new software installation i made a soft reset just before the Ext. Rom was going to install itself on the device.
I had a close look in the forum, i studied it - and there were a lot of guys which wrote they have an XDA2i !! with ROM of TMOBILE or IMATE or whatever - not an original from O2..
And i'am looking for one of this guys, who has an XDA2i and a newer ROM - and this guy should provide me a IMAGE file to be able to write it on a SD card ant ugrade this f* PDA
what happens when you try to re-install the latest rom?
hello I´ve recover my m3100 from a dead brick (after used of universal sim lock) to full working phone
Her is my way
1. I´ve first try flashing a windows mobil 5 rom from my qtek 2020 on the m3100 for 2-3 times
2. then I´ve flas it with the new rom from Cingular ther are using bootloader 1,06..... and IT COME BACK ALIVE....
and if you have a HTC HERMES Then you just find a rom with you phons cid her
"http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades"
BUT REMEMBER IF YOU HAVE A ORANGE M3100 YOU CAN´T FLASH OTHER ROMS
BECAUST YOU HAVE TO USED A ORANGE CID ROM AND IS´T NOT OUT YET..
Good to hear That your device Is up now Congrat's , Wht if it's possible with human being
Why u've instal qtek 2020 on this hermes ?
I´ve just wanted to try somthing after 30 days looking at a £450 brick
@kimbay:
I have some questions for you, in order to understand how you fixed it and provide a "solution" for the others:
1) About the Qtek2020 flashing:
- Did the Himalaya flashing process did anything on the hermes?
- Where did the Himalaya flashing process stopped?
- What did you see on the Hermes screen?
- What error did you see on the Himalaya upgrade utility?
- Which rom did you exactly use? (post the ftp link of it please)
2) About your M3100
- Which CID does your hermes have? If it's a M3100 from UK, i guess it is ORANG001, right?
- Which ROM, radio rom and bootloader version did you have on your device when you fixed the problem?
If there's anything else I am missing and you think can be useful, please post it too...
Yes, please fill us in because I'm sitting on a brick'd TyTN
congrads on bringing it back to life
Moreover - does this imply any hope for those of us with Orange SPV M3100s that are stuck on the latest Cingular ROM with no Orange updater?
Hi POF
I do not know what the flash didt to my hermes but it seems on usb monitor like it slowly after trying to flash the old 2020 rom 2-3 times went further and further in to the program. the screen turn silver and read USB like on the 2020. Every time it just stop (frozz).
Then I just try the new cirguler rom.
yes my m3100 is a orange001 cid -bootloader 1,04
I don´t know what the original rom was I think it was on off the first orange releast I got it 20/7-2006
(Do you whant me to upload the zip file containing my windows 5 mobile ?)
P.S. now my problem is that I can´t unlock the phone because imei-unlock do not suport bootload 1,06
regards
kim
Izzard-UK said:
Moreover - does this imply any hope for those of us with Orange SPV M3100s that are stuck on the latest Cingular ROM with no Orange updater?
not for the moment I´am also stuck on cingular rom
Click to expand...
Click to collapse
kimbay said:
I do not know what the flash didt to my hermes but it seems on usb monitor like it slowly after trying to flash the old 2020 rom 2-3 times went further and further in to the program. the screen turn silver and read USB like on the 2020. Every time it just stop (frozz).
Click to expand...
Click to collapse
OK, but which rom did you exactly use? (post the ftp link of it please)
ftp://xda:[email protected]/Himalaya/
kimbay said:
I don´t know what the original rom was I think it was on off the first orange releast I got it 20/7-2006
(Do you whant me to upload the zip file containing my windows 5 mobile ?)
Click to expand...
Click to collapse
It's ok, it was original rom from M3100... no problem, no need to upload anything.
If you have dead Hermes try to flash with Hermes_1.18.416.1_1.18.416.101_1.14.00.10_WWE_Ship.exe For me - it`s work.Regards
SPV M3100 Freez
Hello
I have A SPV M3100 anyoane write same ... for unlock and new freez in "Windows mobile"
when i put in 3 color and i see:
"Herm100
IPL-1.01
Herm100
SPL-1.04"
And when is in 3 color and connect to PC ActivSync get error cannot recognize this device
I tried to upgrade my athena (french rom) with wm6 english version, and it was the crash
the original rom is dammaged and athena w'ont start enven with hard rest ???
(I did unlock it, it was bought in belgium and its was sim-unlocked).
Any help please to re-install original french rom or any thing else ???
Enter Bootloader mode and check if it says SPL: Olipro
If yes, that you should be able to flash a ROM (the one for your device)
even without ActiveSync Connection
If not, you haven't unlocked correctly.
Don't know what you can do then -_-
I have killed a touch dual (bad uspl - unlocking) now I have a bricked device ( in tricolors) could someone help me with this rom? (france rom)
please
For all OEM Roms -> http://netrunnerat.4shared.com/
This is a France OEM Rom -> http://www.4shared.com/file/37899406/68f31967/RUU_Nike_HTC_FR_13140609_Signed.html
thank you, man!
but now a have an other problem...
early I`ve tried to restore a original rom thru mtty command - task 32 and other commands.
now when I try to flash a fully original rom, device stuck in 0% upgraiding (I mean a grey backgroung flashing mode stuck in 0%... ) I think I enter a bad command thru mtty - could someone help me to restore original parametrs?
please.
Hi
Have you tried the command "boot" in mtty?
If you had unbricked your phone and are trying to change the Rom, don't forget to use USPL. Tell us if it works (or not ^^')
it show that in device no OS...
but problem left
Uhm ... bad ... the problem is ... at the moment i havent a full FR rom with all parts. what have you try?
MTTY have reboot your device? then its crashs or go back to bootloader? what roms have you try? what SPL version you see in bootloader?
NIKI100
SPL 1.16.0000
CPLD-4
a have added you in ICQ - could you go there, I`ll be wait you there - it`s faster, please.
send me a message
it`s seem to me that we have a bad france rom - cus I choose an other rom - Rus rom - process stopping on 2% - with ID-problem ) (I`m not make an Hardspl..)
could you check it?
Can you send me the link of this rom! I need it for my OEM Rom collection!
Next ... if it stops via 2% with ID Problem -> your device isnt cid unlocked!! This is your main Problem!
Yeah, I know it, I wrote that in my first message.
so, I could solve this problem if I have a flashing original rom.
history:
thank you, man!
but now a have an other problem...
early I`ve tried to restore a original rom thru mtty command - task 32 and other commands.
now when I try to flash a fully original rom, device stuck in 0% upgraiding (I mean a grey backgroung flashing mode stuck in 0%... ) I think I enter a bad command thru mtty - could someone help me to restore original parametrs?
it`s seem to me that we have a bad france rom - cus I choose an other rom - Rus rom - process stopping on 2% - with ID-problem ) (I`m not make an Hardspl..)
could you check it?
so could you flash your working device with francerom -to check - rom are flashing?
http://rapidshare.com/files/8878378....411.09_Radio_Nike_1.58.16.27_signed_Ship.exe
One question ... what was your first Rom on your phone? I want know the shipped rom!
touch dual - orange, france.
i cant explane ... no rom in my OEM folder can flash your device without Hardspl or uspl is installed!!! you need MTTY and use command "boot" to start your os! then you flash again! if your OS partition is deleted with useing Task 32 ... you have a problem!!! your device has a FR CID ... only a original FR rom can flash your device and i havent see a original FR rom in the moment! this is why i collect them! this is in a lot errors the best way to fix!
ok, but finally thanks for help.
ok, finally thanks for help.
Hello,
I have a big problem. I flashed my HTC Touch Dual (Swisscom XPA Touch Dual with Italian language) with SSPL first. Then I forgot to flash the device with uSPL or HardSPL and a new ROM (official HTC wm6.1 German) was failed in the middle. Now I have the "upgrade rom code error". Flashing the HardSPL or uSPL is imposible now, bcause of the "ERROR [262] : UPDATE ERROR". I can't find the original ROM (swisscom italian) for the device, all other official ROMs brake with the error " ERROR [294]: INVALID VENDOR ID" (because there is no HardSPL / uSPL, right?). I have USB connection in bootloader mode (can go there only, the operator system is lost) but in the device manager there is MICROSOFT USB SYNC and not HTC USB SYNC (can't identificate the device, only as a "Qualcomm..." in "devices and printer (WIN 7 x64). I have done all the steps for "drivers for WIN 7" and tried it on a (virtual) WIN XP with the same results. Is there a way to save the system with mtty (it's too difficult for me) or other processes?
Thank you in advance (and sorry for my english) !!!
P.S.: I looked at google and other threads in this forum, but without results
NIKI100
SPL-1.22.0000
CPLD-1
-Please use the 'Search' function first, and check the manuals already made available for the Niki.
-First read the manuals completely and follow the steps meticulously..!
-Before posting your questions, remember that everything you need to know, to flash your device, is probably already made available for you on the board.
-Take your time to find out what you need to know before you flash your device, or you 'will' brick it..!
Hello ebsbow,
I got it after two days full of desperation! Mtty was the solution. Two simple commands like "set 16 0" and "task 8" and my device was ready for flashing again. But now step by step.
I have a new ROM on it. Great!
I have same problem plz help....
[email protected] said:
Hello ebsbow,
I got it after two days full of desperation! Mtty was the solution. Two simple commands like "set 16 0" and "task 8" and my device was ready for flashing again. But now step by step.
I have a new ROM on it. Great!
Click to expand...
Click to collapse
I have same problem with my niki plzz help me
Always showing bootloader screen with rom upgrade error
I was trying to revert to windows custom rom from android (due to frequent freezing) and then onwards booting the phone I am always getting the bootloader screen displaying rom upgrade error.
I tried hard reset but still the same problem persists, then I downgraded the HSPL 2.08 to SPL-1.42.HSPL and then tried reinstalling the custom rom but still the same problem persists. In between after downgrading the HSPL, I tried task 29, it was unsuccessful after 96% (shows Invalid Command (Error 290)), while reinstalling the customRUU I have, I got something like error 270 at the end (it goes fine till 100%).
I also tried with installing the radio (ver 2.15.50.14) in between but to no effect
Please help me in fixing the issue, my phone is of no use now