Before I flashed to DCD's 2.1.0 I got all the information I needed - ESN, MSID, MSL etc etc. I've been looking into PRL-related edits lately but keep running into a problem.. Whenever it asks me to type in my MSL # it says that it's incorrect.
Any ideas?
If you used GetSPC to get your MSL, the alpha characters of your hex ESN have to be capitalized.
more info needed
Did the msl work before ??? what carrier ???? Sprint needs msl, Verizon, Alltel is 000000 for all phones.
Related
i flashed my p4000 to the new rom, and my pst info cleared, which i have written down, but when i go to enter the new info in, it asks me for a unlock code...
in all the tuts i read it never told me how to check it or anything i dont know what the unlock code would be, i also bought it used, anyone know?
i cant use my phone until i fix this, and i really need my phone tonight.
Unlock code for the SIM or the phone? I presume theres nothing on your device till now, why not hard-reset or upgrade to another ROM?
Regards,
Carty..
htc p4000 have no sim cards.
im doing the ##778 to get into the PST menu, then when i try to edit it, to input my #, it asks me for an unlock code... :S
have you tried all 0s or 123456 or your phone number?
yes i tried a couple.
000000
123456
654321
i havnt changed the code...anyone know how to change it through an app or the default code?
arg!
i need my phone tonight.
Berserk87 said:
yes i tried a couple.
000000
123456
654321
i havnt changed the code...anyone know how to change it through an app or the default code?
arg!
i need my phone tonight.
Click to expand...
Click to collapse
If it's anything like sprint, then a simple call to your carrier should remedy the problem. with sprint it's called an "MSL" and they give it to you when programming your phone. So if you call and tell them that you need to 'reprogram' your phone, they should walk you through the steps along with giving you the code.
if i reflash it with the nueROM v2 build 5022, its a sprint rom...so that would mean i could use the 000000 as the unlock code?
also, after flashing to the new roms, my phone continually reset...would go on for a minute then reset... thats why i went back to my default rom, but now its asking for an unlock code >.>
Unzip this to your phone. Take your battery off and write down your Hex ESN. Run GetSPC.exe. Type your Hex ESN in the first box. The second box will be your unlock code.
*edit - removed file, missing keygen and someone linked to it on the next page.
k ill try that out, thank you.
any reason why my phone would be constantly reseting after installing the new roms?
k.
my EST is
but when i type that in, its saying "could not link to dll"
?
If I were you I would edit that post and remove that ESN # ASAP, people can use that to steal your service.
jjlwork said:
If I were you I would edit that post and remove that ESN # ASAP, people can use that to steal your service.
Click to expand...
Click to collapse
****, i was worried something like that could happen.
it should be the hex of that number though right?
do i include the first 3 letters?
k i converter the esn to hex and its still not working >.>
Berserk87 said:
k i converter the esn to hex and its still not working >.>
Click to expand...
Click to collapse
you might try the program found here:
http://forum.xda-developers.com/showthread.php?p=1541466 (it's the program called GetSPC)
i tried it on my phone and it provided an MSL number. hafta admit, tho - the MSL it gave me didn't work (and it differs from the MSL i have written down for my phone).
i might also suggest that you SEARCH...it's what I did to find the above. you might also try calling your carrier and ask them what the unlock code is.
OH -- use a HEX version of the ESN, and use ALL CAPS for any letters in the HEX version. It still may provide you with an invalid MSL...but worth a shot.
Make sure you are using the correct number for ESN, just converting the number from the back of your phone to hex will not work. Click program settings and device information on the bottom it will say ESN followed by a 8 digit hex number..that is the hex esn, you then put that in GetSPC and it will give you your 6 digit master unlock code. Dial ##6digitcodeSEND and it will open up to a place with 2 settings that can be changed, enter your 10 digit phone number for these two settings.
If you still can't get it, call Telus & tell them you can't make any calls, they will walk you thru the reprogramming process.
jjlwork said:
Make sure you are using the correct number for ESN, just converting the number from the back of your phone to hex will not work. Click program settings and device information on the bottom it will say ESN followed by a 8 digit hex number..that is the hex esn, you then put that in GetSPC and it will give you your 6 digit master unlock code. Dial ##6digitcodeSEND and it will open up to a place with 2 settings that can be changed, enter your 10 digit phone number for these two settings.
If you still can't get it, call Telus & tell them you can't make any calls, they will walk you thru the reprogramming process.
Click to expand...
Click to collapse
ahhhh
thats what i was doing :loollll
k, i entered my hex number and its still saying "cant link to dll"
i got like 15 minutes to figure this out :O
k the "phonetools" the other guy linked too was missing files, so it wouldnt work either way, lets try the real one >.>
WORKED, AWESOME.
now to test it out
Berserk87 said:
k the "phonetools" the other guy linked too was missing files, so it wouldnt work either way, lets try the real one >.>
Click to expand...
Click to collapse
Don't know why it didn't work, it's the exact same program. The only thing I took out was the PPC 2003 version so you wouldn't run that by mistake.
*edit - just downloaded it & it's missing the keygen. I don't know how that happened, sorry. I would've just linked to the original but I couldn't remember where I'd gotten it initially.
Hello everyone,
I'm a newbie, but a fairly tech-savvy newbie. I recently upgraded to a Mogul ( from a Treo 650 ) and after a bit of prevaricating, decided to upgrade the ROM. I've been researching all over this forum and PPCGeeks ( when they're up, at least ) and thought I had everything worked out about exactly what to do.
0 ) I wrote down the MSID, MDN, A-Key, and ran a program called GetSPC.
1 ) I unlocked the phone ( Olipro 2.40 )
2 ) I flashed the rom to DCD 2.2.6
briefly got stuck here, until I figured I needed to reset the phone to get back into the bootloader screen
3 ) I flashed the new radio.
4 ) After a bit of experimenting, I decided to try NeuROM, as it had more goodies on it. The .rar only had a single program, a .nbh file. ( unlike the DCD with the ROMupdateUtility.exe ) Further research led me to believe that I could move the .nbh file onto a Fat32 formatted microSD card and reset, and it would flash that rom. It seemed to work.
Now I have full access to everything, but the phone will not dial or anything. I typed in ##778# and tried to hit 'edit' and it pops up a screen demanding an unlock code, which I assumed was the six digit code I got from step 0, running GetSPC. That code doesn't work at all. Have I done something terribly wrong? Should I have not installed NeuROM with the microSD? I'm about to try to restore everything to factory settings and perhaps try again, but I'd really like to know where I went wrong. Any ideas? Thank you all for your great work here, and I appreciate any help you can provide.
when you ran GetSPC did you type in the ESN of your phone making sure to capitalize the letters? Try and run it again capitalizing the letters and make sure you type in the ESN exact.
Your issue could be that when you entered your hex code into GetSPC you did not capitalize, it will change the code.
guess I am late...
Wow, thanks for the very prompt response. I do believe that I did not capitalize the Hexadecimal number. I will try that.
EDIT
Yep, that did the trick. Thank you so much for your quick replies. Sheesh, Monday night and I get three replies within three minutes of posting. Ok, memo to myself; Hex code must always be capitalized.
hey... quick qustion do you have the 6 digit code needed for the epst code for the htc touch 6900
jenny_812 said:
hey... quick qustion do you have the 6 digit code needed for the epst code for the htc touch 6900
Click to expand...
Click to collapse
There is'nt one 6 digit code for every phone, each phone has it's unique 6 digit code.
Maybe I'm thinking of something different, but it was my understanding that the EPST unlock code was 000000 for everyone (unless changed through QPST or something).
Depends on your carrier. Verizon and Cellcom (small carrier I am with) use 000000. Sprint uses a piece of software (GetSPL) that generates a random 6 digit MSL code based on your phone's ESN. That is why sprint users need GetSPL. I am not sure of other carriers. We should start a thread that looks like the following....
MSL Unlock Code
Verizon = 000000
Cellcom = 000000
Sprint = (Use GetSPL)
Alltel = ??????
AT&T = ??????
Feel free to fill in the blanks if you are with these (or other carriers)
Ok, thank you for clearing that up. I'm on US Cellular and its 000000.
i always use the registry setting/log file method to get the SPC codes, since GetSPC hasn't ever worked for me. do a search for it on this site; it's easy
mine is a Quest XV6800 and it was locked with a random six digit code
Try a program call "baf msl grabber" worked great on my Qwest mogul
jjohnzon said:
Try a program call "baf msl grabber" worked great on my Qwest mogul
Click to expand...
Click to collapse
now he tells me...
programing my HTC Pro
I put in the ##778# and press edit now its asking me for a code...I got my phone flashed again to metro and that still didnt reset ...I tried calling sprint and asking them for the reprograming code... but they asking me for my acct.#.....Um dont have one with them......
any tips???
Thanks
EPST Code for Samsung SCH-i760
Does anyone know how to get an EPST Code for a Samusung SCH-i760...I fully flashed it to cricket and cant get my internet or pic messaging working cuz I cant program the phone...Can anyone help me...
If it is a verizon phone it should be 000000
this is how i got my code, using the ATDbg0.log file:
http://forum.ppcgeeks.com/showthread.php?p=523161
then i used CDMA Workshop to write the SPC/MSL to 000000. i got that program from a forum somewhere, just Google for it
Hi guys,
I used the tools which is attached. I found it in another website. Probably someone share it before. (NET CF must be installed)
Anyway it works great, it gave an unlock code even my ESN was 0000000.
Good luck!
I got my phone up and running but the internet is still not working. It keeps telling me incorrect password. I've tried (mynumber)@alltel.net/alltel
jamesfelarca:To change the PRL you can put ##775 in the dial pad and send. Then enter the 000000 for the unlock code and select update PRL ->Menu->Edit and select the current PRL (probably a good idea to have this on your memory card) http://www.corolada.com/prl/ The one you want is 30031. Also you may want to do the ##778 unlock code 000000 and then check the NAM settings MDN and MSID should be your 10 digit number.
Click to expand...
Click to collapse
I've also tried this. How do I get the PRL codes for wilmington, NC alltel?(do i need them?)
I have Alltel PPC6800 and I am running Radio 3.27 and DCD2.3.2 just fine. Download the kitchen and run it. Alfter everything is installed then dial the *228 and pick option 3 for new phone. That will update all the settings you need
Click to expand...
Click to collapse
I've also tried this.
Any help is much appreciated.
nevermind i had to do ##000000 and fix the mdn.
IM trying to flash to cricket. already rooted and has the Eclipse Rom.
i got to change the SPC in CDMA WS 2.7 and i confirmed that. i know to flash it you cant read from QPST so i didnt and just filled oout the write spots. In QPST when i click write it just tells me ERROR SPC_CHANGE_ENABLE_I. Or the error PPP Password something.
i tried writing the NV files with CDMA WS but no matter what i do with cdma workshop it now says "PHONE ASK FOR SPC. SPC(6 digits) required.
ANy help would be appreciated...thanks
000000 is spc code. type that in spc field of cdma workshop before write to nv
Sent from my DROID RAZR using xda premium
yea i already know that. i found out what i was doing. using CDMA WS i was going to the SPC spot and writing it then trying to do the stuff. figured out i needed to just SEND the unlock to the phone in order to write items to the phone.
Phone is flashed over now.
Trying to get my Sprint HTC One Max fully activated on Tello. I tried Update Profile (many times), always sits for a while then says "could not complete".
Finally managed to manually program in the MDN and MSID, so voice now works, however data does not.
I think I had previously changed the MSL from the Sprint-provided MSL to 000000, probably as a side-effect of either updating the ROM or unlocking.
Could this be the problem?
What's the proper fix? Put the old MSL back? How? (thanks)