I don't know if it is the new bluetooth drivers or what, but Voice Command will no longer announce name of message sender, or message title. I do hear a notification sound about recieving a new message, but with older versions of dcd; that message was actually read to me.
Any thoughts? Thanks guys.
What I do is make sure that the volume is up. I turn the ringer to vibrate, but the sounds are all on. Doing this allows for the phone to ring and with the volume being up, I can hear the announcements and etc.
Common problem with MS Voice Command. Turning the volume up with the standard version of voice command will not work. Do the following after installing Voice Command.
#1 Go to settings-Personal-Voice Commandand uncheck "enabled"
#2 Overwrite your existing files from the zip. Make sure you can see hidden/system files
\Windows
VoiceCommand_PPC.cpl
\Program Files\Voice Command\
VoiceCmdRes_PPC.dll
VoiceCommandWMP.dll
voicecmd.exe
#3 in settings-personal-voice command-phone-options check announce incoming calls
#4 reenable Voice command
#5 for the h*** of it soft reset
You now have Voice command the way it was supposed to be
thanks fraz, but have already tried replacement files. Calls, appointments, and messages are being announced fine. With earlier versions of dcd rom, when i press function button on headset i would hear a prompt, then i simply would say name from contact list, and phone number would auto dial. With dcd 2.3.1; i am not getting prompt to speak. All other functions of Voice Command are working. Could this be the different bluetooth drivers? Thanks for replying guys.
Related
Hello all. Before tweaking to DCD 3.1.2, Voice command would announce incoming messages and callers. Now, with dcd, the actual ringtone is played over bluetooth headset and no announcments are made. any thoughts on how to eliminate ringtone being played over bluetooth and have announcments made again? Thanks folks. You guys rock!
mine acts different...i get ringtone in my headset and it announces who calls over ringtone in my headset, also my phone vibrates but doesnt ring.
i wish there was an easy way to configure the settings cuz i would like for my phone to vibrate and ring out loud (im not always wearing my bt headset 24/7 when bt is enabled) and i want my headset to announce so and so is caling or the number if its not in my phonebook.
i also notice when in a call it announces who is calling in for call waiting which is cool
Ring and voice command
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Not only those problems but, I have no options for voice commands. I can't set them up use them or even find a icon for them. I am also missing a lot of just standard options. There are no personal settings there is no where to Finnish the GPS setup. I am getting a little tired of running a rom that has absolutely nothing in it. I understand that you should be able to do more with a dcd rom but I don't understand how you are supposed to utilize these options when they have been forcefully removed from the OS. If anyone knows where I can pick up the stock voice command prog, the stock MSN messenger, and how to replace the missing personal settings tab and the slide sound tab. That would be helpful.
Click to expand...
Click to collapse
First of all, dcd's roms are meant to be cooked clean. That's why UC compatibility was added. Lots of people got excited when it was first added, but I've seen very very few people actually utilize it the way it's supposed to. Before I go on I have to ask...are you cooking your own rom using the kitchen, or are you using the precooked rom that is posted? If you're using the latter, then NOTHING besides the essential functions will be installed. It's a clean precooked rom and nothing else.
That being said, if you're cooking your own rom with the kitchen, there's a few things you should know...
Voice Command does not come stock with the phone. It's a third party application from Microsoft that costs roughly $40. There isn't an option for it in BuildOS, so unless you have it and you're installing it via a cab (the way I recommend), or through an OEM, then you will not see any options for it, as it is not installed. If you're referring to Voice Speed Dialer, that's a whole different program. There are no options for it. You have to manually record yourself speaking the commands.
Sliding Sound has to be added using BuildOS. If you're not checking it off prior to cooking the rom, then it will not be included in your rom.
I don't use MSN messenger, but I'm going to guess that Windows Live is what you're looking for? If so, Windows Live also has to be added using BuildOS.
I'm not sure what you mean when you say "Finish the GPS settings". Could you clarify?
As far as your personal settings tab goes, that is a valid problem and we would have to speak further in detail for me to diagnose it.
MS Voice Command: Definitive Guide Thread...
http://forum.xda-developers.com/showthread.php?t=391262
P.S. had the same problem, got the 1.6.19209 version listed in that thread, now voice command talks right over the ring tone and I get the best of both worlds.
i dont use voice command really, but i noticed after the update that my phone no longer physically shows the contact or number of whos calling when my phone rings.
It just says
Verizon Wireless
Incomming Call
Then the rest of the box is blank.
Anyone know how to fix this? I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
I didn't run the verizon cab, but with 3.1.2 i didn't think i needed to? Especially since it still says verizon wireless when people call, and i can call out/send sms
Click to expand...
Click to collapse
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
ROM requires a carrier cab:
Alltel
Bell
Cricket
Iusacell
Qwest
Sprint
Telecom NZ
Telus
Verizon
Click to expand...
Click to collapse
voice command and ringer volume
gcincotta said:
Please read more. All 3.1.x roms REQUIRE the carrier cab to be installed. It says it in clear text right on the first page of the kitchen thread.
Click to expand...
Click to collapse
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
I personally do not use Microsoft Voice Command anymore.
The reason is that it uses a lot of resources on my phone.
I did several customizations on my phone and have several apps installed and I roughly get 24 to 25 mb at startup. With voice command I get around 19 to 20.
I just rather use Voice Speed Dial that is in DCD's Kitchens. Yes you would have to program your voice to recognize the commands, but it does what I need it to do and it saves a lot of memory.
findthisfunny said:
Can someone with DCD Rom 3.1.x and also MS Voice Command confirm if a bug is present? I have 3.0.4 and my wife has 3.0.1 and we both have the same issue with MS VC. Basically, if you use VC to set the ringer volume, you can not re-adjust it using the phone. So, turn off ringer using VC then try to turn it back on using the stylus. Verify that the volume is turned back on.
I simply can not turn the volume back on with the stylus. I can turn it back using VC no problem. Thanks.
Click to expand...
Click to collapse
I have been using VC with all of DCD's ROMS and have not had a problem. I bought the package a while back but found an OEM that I use now. I works great when it does figure out what I am saying. LOL
I don't have any issues with setting the ringer by VC and then by stylus. I also don't have any issues using it through my BT headset. Make sure you have the right settings in the settings control panel with the icond Voice Command. Check out the options and notifications for each of the checked items. There was also a set of files to fix something a while back I have posted them here but you should do the search to find out what they fixed.
I am searching but have not lucked up on the correct search words for an answer...
New Verizon HTC6800 updated the 3.12 and radio 3.39. I noticed voice activation was not on the phone so I searched and found a thread that said add:
Cyberon_Voice_Speed_Dial_v1.2___BT_Fix.cab
So first was that correct? OK ,I did that and got voice command back to make calls holding the device. What I cannot do which I could do with the OEM was:
Turn on my Jaw Bone BT headset (phone BT is on)
Press the button on my BT set
(OEM setup) Would open the voice command box and I speak the name "wife"
Now on the new setup ROM 3.12 when I press the button it goes to the phone screen where I can dial a number which I do not want. I am sure there is a easy fix and hate to waste a post so can someone share that with me. I want to be able to press the button on BT set and hear the beep in my ear so I can speak a command to call a number?
Thx
Sounds like you want Microsoft Voice Command?? Not the Cyberon Voice Dialer. Cyberon requires self created voice tags if I remember correctly...MSVC just requires you to push your BT headset button and speak the command.
is that my only option....anyone else...vets???
What did you end up doing about this?
Greetings all!
I have an HTC Touchpro (Raph800) from Alltel. Yes Vzw is my current provider due to the buyout, but i still use my alltel phone. I recently upgraded it to wm6.5 using the mighty rom. Awesome rom btw! So far everything is working great, save for the bluetooth dialer in my car. it worked great under wm6.1.
I'll give you an example:
I press the button on the steering wheel to make a call.
I hear, "Make a call. Say by Name, By Number"
I say, "Name"
I hear, "Say the name of the person you wish to call."
I Say , <Insert Name Here>
I hear, "Call", <name from above> , "on which number. At Home. On Mobile"
I say "On Mobile"
I hear "Say yes to dial. Or, say back or cancel."
I say, "yes"
I hear "Dialing", <name from above> , "on mobile." Then a bunch of DTMF tones probably to simulate dialing because they always sounf the same for any nimber in my address book.
What is suppose to happen next: (What happend on wm6.1)
My dialer shows up on my screen and it dials the number in my address book and makes the call.
What is happening:
Nothing. Nothing on my phone changes and after 30 seconds of waiting the system times out and goes back to playing music through the speakers.
The only I can get this to work now is if i already have the dialer app open, wich makes the whole process pointless because my contacts are just one more tap away. If I dial from the phone the car system works has a hands free device. I can also answer calls from the steering wheel controls. When the phone is ringing the dialer app is running so I think this is why. I just cant dial from a cold start like I used to under wm 6.1.
Any ideas? Complaints? Gripes?
btw, the car is a 2011 Kia Sorento.
Thanks in advance for any information.
[Update]
Now for whatever reason, the bluetooth dialing is completly not working. Is there another dialer that would work? Or am I screwed?
[/Update]
I'll preference this post by saying I am a newbie. I'm learning how to tweak my HD2.
That being said, I activated voice notifications and it reads the head line and sender of each of my emails, incoming calls, etc.
I do not know how to DEACTIVATE.
Please point me in the right direction. Its getting me in trouble when in meetings at work.
How did you activate it in the first place?
Did you try the voice command settings?
Settings Tab>All Settings>Personal>Voice Command
Is there anyway to have Voice COMMAND instead of Voice Talk be activated when longpressing search or pressing my headset button? Voice Command has so many more commands than the other one, and I find it simpler. I tried clearing defaults and reassigning, but the only two options that show up then when trying to reassign are Voice Search and Voice Talk. =[
Thanks!
Bump? Anyone?
Why do you think there is any difference in the available commands? I don't think there is.
Because there is. See for yourself.
Try setting, say, an alarm in Voice Talk - won't work. Go through the help pages, there's far less commands listed in Talk than in Command.
Lencias said:
Because there is. See for yourself.
Try setting, say, an alarm in Voice Talk - won't work. Go through the help pages, there's far less commands listed in Talk than in Command.
Click to expand...
Click to collapse
That's right. In Voice Command I counted 14 commands and in Voice talk I counted eight. For example, just try going to Voice Talk and say "email" someone or "open" some application. It won't work. Try the same commands in Voice Command and it works!
Ok. I'll be damned. Now I want to open voice command too
Here's what's funny. You can open voice command from voice talk by pushing the menu button in voice talk, but you can't use your voice to open it.
Sheesh.
Samsung epic 4g touch 2 it's possible
goto the android market and download, " bt app launcher". it is a bluetooth launcher for when your headset connect to your cell phone. the app is free. once installed it allows you to select the app that you want to start when the bluetooth device connects to your cell phone. you will see 2 voice commands 1 will be green and 1 will be blue with a line through it. select the blue 1 with the line running through it horizontally. now whenever your bluetooth headset connect your cellphone voice command will start not voice talk. unfortunately whenever press the button on your bluetooth headset or press to lunch button from your phone... voice talk will still launch . I happen to have a motorola bluetooth headset that allows the flip of the microphone which then turns on the bluetooth device connects to the cellphone, so this works for me.
Lencias said:
Is there anyway to have Voice COMMAND instead of Voice Talk be activated when longpressing search or pressing my headset button? Voice Command has so many more commands than the other one, and I find it simpler. I tried clearing defaults and reassigning, but the only two options that show up then when trying to reassign are Voice Search and Voice Talk. =[
Thanks!
Click to expand...
Click to collapse
I agree 100 percent. I posted here ,ATT fourm and android Central and go no reply. I asked my friend at aTT to check it out with Samsung. Knownone at aTT had a idea. I don't know why they just did not use Voice Command. You say comands on you bluetooth and you get Voice talk. (say Galaxy) voice tlak only works with bluetooth by default no matter what your setting are.( Blueant Q2 here.) Voice command does email and more but you have to lauch it yourself.
My other phone you just pushed the extra button on the side and say what you wanted. Both of these programs are Vlingo rograms too.
I will download the BT appy though
download bt
I don't think its going to work.
This is exactly why i shouldn't read the forums, now I want Voice Command to be my default DOH!
I was wondering if this was possible as well. Maybe someone could find where the double home tap action is mapped to.
voice command
there is a nice little widget that has voice command, voice talk and driving mode
buttons that's included with the galaxy S2.
I have a A2dp Motorolla BT, It will start voice "command" when blue tooth head set connects to cell . But not when pressing the button on the blue tooth head set or the phone . and it will automatically listens. it does not have the standby activation code hi galaxy like voice " Talk"
Thanks for the idea, I added it to my ROM.
I had the same problem and made a workaround with Tasker.
If you have Tasker installed:
1. Make a new profile called "Long Search" and select
Event>Hardware>Button:Long Search
as the context.
2. For the task, make a new task and select the action category "App" and select "Load App" and then "Voice Command".
3. Then when you long press the search button (assuming you cleared your default or never picked one), a tasker helper will show up as an option along with "Voice Talk" and google's voice search. Select it as your default.
Now when you long press the seach button "Voice Command" will launch.
Hope this helps.
This works exactly as advertised. Thanks for posting this, and now I've got to figure out Tasker!
xfive420 said:
I had the same problem and made a workaround with Tasker.
If you have Tasker installed:
1. Make a new profile called "Long Search" and select
Event>Hardware>Button:Long Search
as the context.
2. For the task, make a new task and select the action category "App" and select "Load App" and then "Voice Command".
3. Then when you long press the search button (assuming you cleared your default or never picked one), a tasker helper will show up as an option along with "Voice Talk" and google's voice search. Select it as your default.
Now when you long press the seach button "Voice Command" will launch.
Hope this helps.
Click to expand...
Click to collapse