I got the mogul, and when I run any dcd rom Its loops to the welcome then restarts. Tried relocking, then unlocking (with olp 2.40)
I tried to install the rom first (dcd 2.2.0) then 3.27 Radio(off SD card cause wouldnt reboot)
Then I tried The 3.27 radio first, then 2.2.0 rom same thing(restarts at welcome screen)
SD card flashed back to 2.17 Sprint official, with 1.47 radio(works fine every time)
also tried it on dcd 2.1.0, and 1.6.8 all restarted in a loop,
Anyone have any suggestions on how to fix?
Or does anyone else have a good stable wm6.1 with htc touch UI rom maybe with 3.27 radio included?
I am a noob but im am starting to get this thanks for your help
do you happen to have ftouchflo cooked in somehow? if you have ftouchflo running, it wont let you calibrate the screen (for me at least).
JonnyBoy313 said:
I got the mogul, and when I run any dcd rom Its loops to the welcome then restarts. Tried relocking, then unlocking (with olp 2.40)
I tried to install the rom first (dcd 2.2.0) then 3.27 Radio(off SD card cause wouldnt reboot)
Then I tried The 3.27 radio first, then 2.2.0 rom same thing(restarts at welcome screen)
SD card flashed back to 2.17 Sprint official, with 1.47 radio(works fine every time)
also tried it on dcd 2.1.0, and 1.6.8 all restarted in a loop,
Anyone have any suggestions on how to fix?
Or does anyone else have a good stable wm6.1 with htc touch UI rom maybe with 3.27 radio included?
I am a noob but im am starting to get this thanks for your help
Click to expand...
Click to collapse
The same thing happened to me. The only way that I could get past that issue was to wait about 5 minutes until I started to calibrate the screen. It then worked..... but it would then reboot in a loop when i tried to open Activsync to configure my exchange server. (And no, I didn't have touchflo enabled).
I went back to 3.16 and it works fine.
Make sure your Olipro 2.40 unlocker took correctly. If it did not, then you will get reboots exactly as you described.
Also, did you do a hard reset after installing your latest ROM?
Hard-SPL did not install correctly... This happened to my phone as well.
Rom restarts right after welcome screen
Ill i am about to try that again, but the flash made me lose the ESPT settings.
Now I cant make any calls. I wrote all settings down , but I do not have the Unlock code, And I cant find it, (ITS NOT 000000)Running a mogul.
the reboots are because you didnt unlock correctly.
i had the same problem, i had the new rom flashed but the phone wasnt unlocked right.
you have to run titanunlocker.bat first, follow the instructions then your boot loader should show 2.40.
as for the ESPT settings, you can get the unlock code by using the attached.
your ESN hex is what you need to input to the keygen.
should be under your device information, in your settings.
Roms restart right after I tap the the Welcome
Ok I locked it again, Loaded a fresh official 2.17. Connected to activesync unlocked again, loaded a DCD 2.2.0, then 3.27 radio, restarded,set it all up,
got to page with start tab(home screen) Then starts to restart( at the same point). Maybe I dont Have the right unlocker it says 2.40(when i open with winrar)
Thanks, im very new at this but you guys have help me all the way through.
I have successfully recovered my phone in every way possible. I mean every way. But still havent seen a rom work yet. I feel like IM close though
Roms restart right after I tap the the Welcome
The Spf unlocker that ive been running does not show 2.40 in bootloader after unlock, only 1.10. But when I open it with winrar I can see the olp2.40
should i look for a different one
When I load this spf on phone, from home pc the unlocker says if you see 1.10 unhook usb then reconnect
Roms restart right after I tap the the Welcome
maybe Im not understanding how to do a hard reset a hard reset
thanks for the spc getter worked perfectely
Can anyone share their experience upgrading their Bell HTC6800 ROM (including radio, unlocking SPL, and upgrading PRL) with DCD 3.0.1? I have never done it before but curious to hear if anyone has had success or failure.
I noticed that DCD released a Bell ROM in his 2.3.2 kitchen but not in his 3.0.0 kitchen. Does anyone know how to port the correct Bell settings into the 3.0.0 release?
My main reason for upgrading is of course better performance but more importantly I am curious about aGPS and how I can use it instead of my Bluetooth GPS receiver. If anyone can share that would be much appreciated.
http://rapidshare.com/files/99219142/DCD_3.0.1_Bell.exe
Check the last page of this thread
http://forum.xda-developers.com/showthread.php?t=363693
Thanks origins81. I noticed now that DCD added the Bell ROM to his 3.0.1. So can you share you experience with this ROM upgrade? Did you have any problems (I assume you've done this before)? Can you share your experience if you are a Bell HTC 6800 user?
1. If you have not already done so, run the 2.40-olipro unlocker. Your device will again be left in tri-color screen.
2. Flash the official sprint 3.35 update.
3. When the device boots for the first time, do not pass screen calibration. Flash a 3.x.x ROM. (that being the custom rom of your choice)
Think I only used the official Bell rom for about a day before i got sick and tired of it and flashed to one of DCD's clean roms, never looked back since then...
As much as I hate Bell, I purchased this phone, had it for about 7 months and got into flashing roms, well, this newest ROM from DCD was the trickiest. First I tried using the Kitchen (disaster), I finally got it to work, installed it, and I kinda forgot to read the instructions, you have to be SURE to install the Olipro 2.40 first, and flash to the new radio, or it will do one of two things. 1st it will either continuously restart or 2nd thing is it will get stuck on the infamous red, blue, and green screen. However if you do get stuck on this, you can flash the rom again, then install the newest radio and it *should work.
But after all that pain and misery, I got a little better signal (I'm not too sure if this is caused by the new rom or not), the GPS works great as always, and seeing as Bell charges 2 arms and your first child for data, I haven't tried the speeds for Rev. A.
P.S- If you ever need help with your Bell 6800, just ask, I've been troubleshooting the same phone for a couple months, and I know how to use a kitchen, just a PM away.
Thanks guys. You have instilled more confidence in me now. I am just going to make sure I have the original stock ROM from ustar as well as the Titan re-locker just in case (I want a backout plan). I will wait a little longer until everyone irons out the kinks of this new 3.35 radio and I will give the latest DCD ROM a try. Thanks again!
I've used the SPRINT update and it works fine. I've added the quick GPS program that comes with the DCD version and I am going to change the startup logos from Sprint to Bell...(As soon as I figure out how). I didn't need to reprogram anything!!
I just got my phone today, gonna give this a shot...
oh man... i ran the olipro 2.4 file and it took me to the tri color mode and then tried to flash it with the latest sprint update. it went up to 4-5% and then it showed an error of Update Utility. i tried to go bak to the Bell update and it did the samething but this time after 1%. can someone please help me out here? I'm with bell.
ok now i'm stuck at the bell screen and at the bottom it says "No Radio" cuz i tried flashing the dcd file.
Well, to begin with, here are the steps I took to accomplish what I have.
1. Flash Olipro 2.40
2. Flash Radio to 3.35 (For the newest version of DCD's rom)
3. Flash the ROM to DCD's rom.
Now, the first time I did this, I got stuck at the tri-color screen, such a pain. I then tried flashing the rom again, and it rebooted continuously and I had no idea why. This was because I didn't flash to the newest radio. So I did that, and it worked, so try those steps, and good luck.
On problem that I did notice is that my phone always has the roaming triangle on?? Hopefully it's not costing me roaming charges... I was going to try and use the DCD 3.0.1 rom but don't want to chance it. I'm going to try playing with it some more an see what happens.
I'm running DCD 3.0.1 on my Bell 6800 and it's working great so far (day 2)
Follow Origins81's install points above, and remain calm if it takes a try or two to get past the 2.40-olipro unlocker 3-color screen step.
I'm having some issues ActiveSync'ing to both work and home PCs, but I don't think it's related to this ROM.
GPS works great with Google Maps
The alarm clock bug is fixed (e.g. not working when plugged in)
Got it working and everyhthing is great except is doesnt play video in the media player...Working on it.
Well for some reason I can't seem to activate my phone. I hit Talk then I enter ##911224#. It tries to connect for 15 secs then hangs up.
I _thought_ I did everything properly.
1) Ran Olipro2.40 (actually it was the unlock from http://www.phonenews.com/how-to-add-gps-to-htc-mogul-xv6800-p4000-titan-2663/) it looks like it's got Olipro2.40 in it.
2) ran official upgrade from sprint (RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship.exe)
3) Extracted DCD_3.0.1_Bell.exe and ran the RUU.
hope I didn't perma-brick it.
M
Ok fixed it. Browsed around the and found out in a Howard forum that you have to type ##111111# (doh!) before. Ok my heart can start beating again! Posted for posterity. The code that I used must have been for a different area. This phone is from the GTA.
can you give me a link to those howard forum posts because i ran into a problem ... after a last flash my phone works but its not activated... I tryied ##111111# but i get a code check error... ##911224# doesnt do anything... ##778# works but 000000 code doesnt so i cant get in... HELP
Roaming After Update
After suffering with the pesky Bluetooth issues with my HTC, I thought I'd do some searching on the Internet to see if others had the same issues. Lo and behold, it looks like a real bug with the HTC. After reading some forums, it looked like the latest Sprint release would cure the problem. I downloaded an unlock program ("Hard-SPL-MFG") and the Spring update (RUU_TITAN_SPRINT_WWE_3.35.651.2_RS_TITAN_3.35.04_4350H_SPCS_AM_Ship)
and proceeded to update my HTC.
After a few unsuccessful attempts (stuck at the three color bars a couple of times, restarting a few times on it's own) I managed to get the unlock code and Sprint update installed.
The problem I have now is that it appears that I am now roaming even though I'm in my calling area (I'm with Bell Canada)!
Help! What should I do??
Check the bottom link out, had similar issues when I first flashed. If you have any further questions let me know
http://forum.xda-developers.com/showthread.php?t=363693&highlight=FOR+BELL
i follow the step, but when the phone restart, i stuck a the bell screen...
i'm unable to connect with the usb.
Can you able to help me ? to complete the installation or trying to go back OEM
- i do the first step; see the red, green, blue screen (http://forum.ppcgeeks.com/showthread.php?t=9093)
- flash the rom
- now stuck......
thx for your precious help
TwistedWaffle said:
As much as I hate Bell, I purchased this phone, had it for about 7 months and got into flashing roms, well, this newest ROM from DCD was the trickiest. First I tried using the Kitchen (disaster), I finally got it to work, installed it, and I kinda forgot to read the instructions, you have to be SURE to install the Olipro 2.40 first, and flash to the new radio, or it will do one of two things. 1st it will either continuously restart or 2nd thing is it will get stuck on the infamous red, blue, and green screen. However if you do get stuck on this, you can flash the rom again, then install the newest radio and it *should work.
But after all that pain and misery, I got a little better signal (I'm not too sure if this is caused by the new rom or not), the GPS works great as always, and seeing as Bell charges 2 arms and your first child for data, I haven't tried the speeds for Rev. A.
P.S- If you ever need help with your Bell 6800, just ask, I've been troubleshooting the same phone for a couple months, and I know how to use a kitchen, just a PM away.
Click to expand...
Click to collapse
Hi TwistedWaffle, Are you from the montreal region? I am looking for somebody who would do this stuff for me... Can you help?
Guys,
Call me a noob, moron, lazy.... whatever... Sry in advance.
I used this site back with my Siemens SX66 and had great success. I'm not doing so good with my 7501.
First of all, I see a million posts everywhere but it's very confusing as to what to do, what files to use, etc.. I know this is all volunteer work so I appreciate all the hard work that goes into it.
Here is my problem. I want to upgrade my 7501 to 6.1 and AP4 (I think that's what it's called).
I bought the unit unlocked and I've used it on AT&T for some time.
I've followed the instructions to upgrade the radio to 1.50 (or 1.57) and on step 2, it finished (or I thought it did) but upon reset, all I get is a black screen. And yes, I took out the SIM and Memory card prior to any of this and did a factory hard reset.
I was able to put AP3 on it but now when it reboots, it goes through a constant cycle of reboot, reload the custom software, reboot, reload custom software etc... I can't get it out of that loop.
I thought I saw something about this on a thread but after 2 hours (yes 2) of searching, nothing.
help?
ATHE100
IPL - v2.02
ATHE100 MFG
SPL -v3.50 OliNex
Fixed...
Finally found the post about AP3 and wrong SPL... Got new file, loaded, upgraded to AP4...
Working like a charm...
hey guys im sorry i know there is a page for this in the wiki but i read it and there is no mention of my spl (2.07.0000)
my phone is the sprint version of the titan the mogule
so i got stuck when i tried flashing from dcd's latest rom 3.2.3 to the new sprint 6.1 as i understand it i was supoosed to relock the device so i did using the titan_relocker file. every thing seemed good so i tried to install the new rom 3.56.651.0_RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship and it acts a little weird the load bar shows up on the computer and then about a half a minute later on the screen of the phone it loaded up to about 8 percent or so and then gave an error and some recovery steps that didnt do any thing.
so now im stuck in the flash scren and i have tried flashing a bunch of roms
an old stock sprint rom
the spritn 6.1 i mentioned earlier
and then dcd's 3.2.3 (this one dose not do the strange thing where the load bar shows up on the computer first then the phone but it still does not work)
and nothing works. i cant find any mention of my spl 2.07 and i dont know how it got on my device. as i understand it your phone has to boot up to be able to put a new spl on there so im at a loss if any one could help i would be very greatful.
im new to the 8900 so i dono who the gurus are around here i was a tilt and hermes guy so i dont even know who to ask.
dang i have a theory i think i may have only goten to the step where it flashes like a temp spl on to the device on the relock?... that sould right to any one?/ slash know how to fix it
edit: cant re-run the relock app it crahses and goes to the recovery steps before hitting 1 percent
Hey guys,
I just got a brand new Telus P4000, and love the look of this ROM - http://forum.xda-developers.com/showthread.php?t=462827.
I have been trying to figure out for hours how to put this on, and have checked all the FAQs and guides I can find, and am very frustrated, and I am really hoping one of you guys are able to help...
So i updated the firmware from HTC from 5 to 6.1 I believe. I ran nueSPL-2.47 on the phone and believe it installed successfully?
Whenever I try to install a ROM it gets stuck at 0% and then says that an error has occured.
I am probably missing something stupid and small, but and so new to phones and am having a hard time.... Anyone have any insights?
Thanks
your probably not actually unlocked, put it in bootloader (power +camera then soft reset) and read what it says, should say 2.40 olipro somewhere there. if not, re-run the unlocker and make sure you follow all its directions explicitly. alot of people leave out the disconnect and reconect step thinking it's not necesary, when in fact, windows won't load drivers without disconecting first