Related
So I felt bad about *****ing at a bunch of n00bs so I wrote up a quite guide specific to PDAViet roms since that's what I use.
http://wiki.xda-developers.com/index.php?pagename=PDAViet Upgrade Tips and Tricks
If you have a tip/trick relating to any PDAViet rom, you can PM me to add something, or better yet, since this is a wiki, ANYBODY can edit it. just click the "edit" button at the bottom and just follow the syntax. I'll probably check now and then to fix up formatting issues, but we all need help with content.
mr_yellow said:
So I felt bad to *****ing at a bunch of n00bs so I wrote up a quite guide specific to PDAViet roms since that's what I use.
http://wiki.xda-developers.com/index.php?pagename=PDAViet Upgrade Tips and Tricks
If you have a tip/trick relating to any PDAViet rom, you can PM me to add something, or better yet, since this is a wiki, ANYBODY can edit it. just click the "edit" button at the bottom and just follow the syntax. I'll probably check now and then to fix up formatting issues, but we all need help with content.
Click to expand...
Click to collapse
Nice work! I'll be installing 4.0.0.0.0.0.00.0.0.0.000.6 (kidding ) tomorrow, maybe I'll write some help
mr_yellow said:
So I felt bad about *****ing at a bunch of n00bs so I wrote up a quite guide specific to PDAViet roms since that's what I use.
http://wiki.xda-developers.com/index.php?pagename=PDAViet Upgrade Tips and Tricks
If you have a tip/trick relating to any PDAViet rom, you can PM me to add something, or better yet, since this is a wiki, ANYBODY can edit it. just click the "edit" button at the bottom and just follow the syntax. I'll probably check now and then to fix up formatting issues, but we all need help with content.
Click to expand...
Click to collapse
Thank you for your nice work! It's very helpful for newbie
Commom Glitch
Hi,
I guess this is 'Bible' for Nubes Gr8 work Yellow... But I think we might have to add one more common problem - The vanishing act of email accounts... I didint edit it since i donno the reasons or the work around... Could some one update that????
Riyaz Hyder
Updated it with new info...
Again, updated with a short thing about losing settings while soft resetting.
Hello,
Please add this, how to change the pool size
1) download XVI32 (freeware hex editor)
2) open OS.nb
3) find ascii NKKD8
4) find it again (next occurance)
5) find hex value FF FF FF FF FF FF FF FF 9B 4F FF FF 64 B0
6) you will see "8C 00 00 C0 00 00". the pagepool size is C0 (which is 12MB)
7) change it to 80 to have 8MB, or 40 60 for 4MB 6MB respectively.
8) save and reflash
if you backup everything before reflashing the same rom and restore after the flashing (using spb or sprite backup) everything should be fine.
Click to expand...
Click to collapse
Thanks for the submission. I've added it. It's not really pdaviet related so I added it to the ProphetFAQ and make a link.
FYI to the everyone. The wiki is editable by anyone. If I'm not responding, you can add stuff you feel is important to the wiki yourself. Don't be afraid to click the edit button!
I use the lock password and there is no problem for me... I used it with pdaviet, pdamobiz and gollum roms...
I think the lock password isn't saved if you soft reset. Try locking the device, THEN soft resetting.. do you have the guts to try? only option afterwards is to hard reset... =)
DCD great rom, like usual. Does anyone have the same problem my add/remove programs is empty. I flashed with the Rom 2.1.0 Bell Version (reflashed twice). I installed Live search it appears in the remove programs. Total commander, Google Maps, Windows Live 10.6.33 and Calendar+ does not appear. Maybe it's a WM 6.1 problem.
Edit:
I think dynaxfl has the solution in Post #13. I just added some extra steps
1. Do a hard reset. (sync before doing hard reset because you will lost all your contacts/calendar/etc...)
2. After reboot install a registry editor
3. Reset the following the registry to default value: (from dynaxfl post)
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1001 = 2
-> Change the value data from 1 to 2
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1005 = 16
-> Change the value data from 40 to 16
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1017 = 128
-> Change the value data from 132 to 128
Save the change and soft reboot. This should work
4. After your reboot you will not see your registry editor you installed in step 2, but reinstall and you'll see it.
5. Install you apps and you should see them in the Remove Programs
DarkDevil said:
DCD great rom, like usual. Does anyone have the same problem my add/remove programs is empty. I flashed with the Rom 2.1.0 Bell Version (reflashed twice). I installed Live search it appears in the remove programs. Total commander, Google Maps, Windows Live 10.6.33 and Calendar+ does not appear. Maybe it's a WM 6.1 problem.
Click to expand...
Click to collapse
Yeah i've been having the same problem ever since I flashed to 2.17, at first I thought it hadn't flashed correctly or was a bug so I did a hard reset, even when it booted up and I installed a program to test, nothing appeared. I'm running the Bell wm6.1 rom and I still have the same problem.
I've been using activesync to remove programs though, just it sucks cos it not convenient when my pc is not around....
The 2.17 I didn't have this problem. Does anyone else have this problem on Sprint, Verizon, Telus etc..
I don't. Everything I have installed so far shows up. XV6800.
I am using the DCD 2.1.0 Bell rom aswell, but found that it didn't like to be restored from a Sprite Backup, nor PPCPimBackup.
If everything is fresh, it seems that there are virtually no issues at all, unlike previous roms. Maybe the structuring in wm6.1 is different?
fiftyclick said:
I am using the DCD 2.1.0 Bell rom aswell, but found that it didn't like to be restored from a Sprite Backup, nor PPCPimBackup.
If everything is fresh, it seems that there are virtually no issues at all, unlike previous roms. Maybe the structuring in wm6.1 is different?
Click to expand...
Click to collapse
When you installed a software do you see it in the "Remove Programs"?
Actually... I just spent the time to install 40+ apps, and now that I check I only see roughly 4 entrys in the remove programs applet.....
If i remember correctly, either sktools or pocket mechanic has a built-in program manager/remover. I will check once my ppc gets to that cab install! (still a lot more progs to go.)
fiftyclick said:
Actually... I just spent the time to install 40+ apps, and now that I check I only see roughly 4 entrys in the remove programs applet.....
If i remember correctly, either sktools or pocket mechanic has a built-in program manager/remover. I will check once my ppc gets to that cab install! (still a lot more progs to go.)
Click to expand...
Click to collapse
You can use ActiveSync like origins81 said.
I'm running dcd's 2.10 on verizon and I can see all of my apps in remove programs on my phone. Also, I can see all in activesync add remove programs.
I swear with previous roms when I would open add remove programs in activesync I would only see the apps that I installed via activesync. But now I see all apps that I have installed, including the cab files that I installed from my phone.
You know, i find activesync to be tempermental like that... sometimes it shows you EVERYTHING, and other times... almost nothing at all.
I have the same problem for the Bell rom... i think that has to deal with the security registry settings...
Updated to DCD Rom 2.2.0, same problem. Anyone else?
I think I found the solution to this problem... DCD edited the security policies to to "relax the security"... Install a registry editor, and reset the following the registry to default value:
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 2
-> Change the value data from 1 to 2
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 16
-> Change the value data from 40 to 16
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 128
-> Change the value data from 132 to 128
Save the change and soft reboot. This should work
dynaxfl said:
I think I found the solution to this problem... DCD edited the security policies to to "relax the security"... Install a registry editor, and reset the following the registry to default value:
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 2
-> Change the value data from 1 to 2
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 16
-> Change the value data from 40 to 16
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 128
-> Change the value data from 132 to 128
Save the change and soft reboot. This should work
Click to expand...
Click to collapse
Used PHM and changed the values like you specified and saved...didn't work for me
dynaxfl said:
I think I found the solution to this problem... DCD edited the security policies to to "relax the security"... Install a registry editor, and reset the following the registry to default value:
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 2
-> Change the value data from 1 to 2
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 16
-> Change the value data from 40 to 16
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 128
-> Change the value data from 132 to 128
Save the change and soft reboot. This should work
Click to expand...
Click to collapse
Used PHM and changed the values like you specified, saved and did a soft reset...didn't work for me
DarkDevil said:
Updated to DCD Rom 2.2.0, same problem. Anyone else?
Click to expand...
Click to collapse
I'm on 2.2.0, and I can see all of the programs I have installed so far. I could on 2.1.0 also.
Start->Settings->System->Remove Programs shows:
C. Ghisler & Co. Total Commander
Google Maps
Holux GpsViewer
Q Inbox Extender
Stroths-Codyppc Led Killer 3.1
And those are the only programs I've installed, so the list is accurate. Maybe something you're installing is doing weird stuff to the ppc.
Edit: I haven't changed any registry settings or anything else. I installed the 2.2.0 rom as-is, and then installed the above programs on top. No changes.
drew826 said:
I'm on 2.2.0, and I can see all of the programs I have installed so far. I could on 2.1.0 also.
Start->Settings->System->Remove Programs shows:
C. Ghisler & Co. Total Commander
Google Maps
Holux GpsViewer
Q Inbox Extender
Stroths-Codyppc Led Killer 3.1
And those are the only programs I've installed, so the list is accurate. Maybe something you're installing is doing weird stuff to the ppc.
Edit: I haven't changed any registry settings or anything else. I installed the 2.2.0 rom as-is, and then installed the above programs on top. No changes.
Click to expand...
Click to collapse
i am not sure if this is just the problem for Bell ROM... it didn't work on 2.1 ROM, and not on 2.2 either until I change the registry settings.
dynaxfl said:
I think I found the solution to this problem... DCD edited the security policies to to "relax the security"... Install a registry editor, and reset the following the registry to default value:
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001001 = 2
-> Change the value data from 1 to 2
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001005 = 16
-> Change the value data from 40 to 16
HKEY_LOCAL_MACHINE\Security\Policies\Policies\00001017 = 128
-> Change the value data from 132 to 128
Save the change and soft reboot. This should work
Click to expand...
Click to collapse
I tried your solution, but it didn't work for me.
Edit: Sorry it works with some extra steps look at first post
My Registry edit fix is only for those who just flash their ROM, after apply the registry edit, all newly installed programs will be appeared on Remove Programs.
For those who already installed programs, and try the following registry edit:
HKEY_LOCAL_MACHINE\Security\AppInstall
Select on each key that contains the program's name, and looking for DWORD Value: ROLE
Change the decimal value for ROLE to 254.
You have to apply this to each program. Hope this helps.
I have created a simple front end to Paradis_Pals change page pool through activesync method. This was done as an experiment, but seeming as it works, I thought I may as well let others use it.
Thanks to Korand for patching the batch files.
Download and unzip the files to anywhere.
Connect your device with activesync
Run l3v5y Change PP.exe.
Select the PagePool you want.
Wait a few seconds.
Soft reset your device.
Download (Change PP for WM6, WM6.1 for WM6.1 devices):
Below
Skydrive
thanks im going to try it as soon as i can...
console output:
>"pdocwrite" "6.nb" 0x36855A
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 20 2a 02 04 15 39 11 1e 15 0b 05 b8
CopyFileToTFFS(6.nb:0, 36855a, 00000001)
but nothing happend.. how i check if pagepool is changed? Settings->System Info -> memory??
great job my friend i will try
how i check if pagepool is changed? Settings->System Info -> memory??
Click to expand...
Click to collapse
Or
Setting, About???
Thanks...
Is Change PP E-ten X500+ compatible (WM6)? Tested?
What "rake" I have or will have?
Suitable for HTC Prophet only at the moment.
i'm new to all this...could you explaing what Page Pool is and benefits of its increasing?
Di-Ma-Z said:
i'm new to all this...could you explaing what Page Pool is and benefits of its increasing?
Click to expand...
Click to collapse
Copied from here: http://blogs.msdn.com/windowsmobile/archive/2005/11/17/494177.aspx
The Page Pool
Applications use RAM in two ways. There is code that runs, and there is data that is created while it is running. On a NOR device, the code can run directly from the ROM and not be loaded into RAM first. This process is called XIP (eXecute In Place). NAND devices can't XIP, so their code is loaded into RAM and executed from there. If you don't have a Page Pool, this code is loaded into normal RAM. The Page Pool is a mechanism to limit how much code is loaded into normal RAM. With a Page Pool, we can unload code that hasn't been used in a while and reload it later if we need to. We can't do that without a Page Pool.
LordDeath said:
Copied from here: http://blogs.msdn.com/windowsmobile/archive/2005/11/17/494177.aspx
The Page Pool
Applications use RAM in two ways. There is code that runs, and there is data that is created while it is running. On a NOR device, the code can run directly from the ROM and not be loaded into RAM first. This process is called XIP (eXecute In Place). NAND devices can't XIP, so their code is loaded into RAM and executed from there. If you don't have a Page Pool, this code is loaded into normal RAM. The Page Pool is a mechanism to limit how much code is loaded into normal RAM. With a Page Pool, we can unload code that hasn't been used in a while and reload it later if we need to. We can't do that without a Page Pool.
Click to expand...
Click to collapse
Please tell me which size of Page Pool is best for HTC Prophet?
thanks so much
I can tell you only my personal experience:
Compared to the previous 8MiB Pagepool on my device the 4MiB Pagepool is not slower, but I have more free memory.
The bigger the Page pool, the more programs you can run at the same time without the system being dodgy. You have less RAM available for your programs though.
6MB should be enough in both ways (free ram and amount of apps you can start simultaneously) If not, try 8MB.
You can go up, but only if you have more than 64 MB of ram in your device, then it won't hurt to have more Page pool imho.
helllo, I'm new in the world of the cooking, and i want change PP on WM6.1 on the OS.nb or MyRom.nbh
A solution exists for this release of Windows Mobile ??
Sincerely
Is it for a prophet ROM? as far as I can remember, the prophet uses *.nbf...
You should be able to use this with nb2nbf program, but I'll need to find the start address...
edit: start address is: 0x58956...
Sorry, i've don't see that this section isn't good, I've a HTC elf and not a prophet !
But I don't find for Elf !
Something is wrong...
I wanted my PagePool to 4MB...but at least i only have 44MB RAM instead og 52MB...
6MB PagePool is working fine...
Can you please fix the 4MB-Problem?!
I think that means it has flashed the wrong PagePool size. I shall see what is wrong, and try to fix it as soon as I can.
l3v5y said:
I think that means it has flashed the wrong PagePool size. I shall see what is wrong, and try to fix it as soon as I can.
Click to expand...
Click to collapse
Thanks a lot
One quick thought: Prophet Tools (link in my signature) has the WM6.1 page pool settings. See if that works for you and if not I'll check that out as well.
l3v5y said:
One quick thought: Prophet Tools (link in my signature) has the WM6.1 page pool settings. See if that works for you and if not I'll check that out as well.
Click to expand...
Click to collapse
Oh...this is a great tool
But i can do what i want....my RAM is not more then 50MB...and this is the result when flashing the PagePool to 6MB...
But i want to have to Flash the PagePool to 4MB, so that i have 52MB RAM
Please fix this...thanks...
UpToDate is a medical software which, in my opinion, is indispensible.
I faced a lot of problems in trying to run it on lots of WM 6.5.5 ROMs on my Raphael aka Touch Pro owing to which i had to stick to WM 6.1 ROMs!
But finally I found that the solution for this existed in fragments on XDA itself.
So I thought it would be great if it is compiled at one place so that everyone who is looking for it finds it.
DrTom's fix works on Energy Rom Leo 26 Feb WM 6.5.5 Sense 2.5.2012 build 23541 on My HTC Touch Pro!
Here is what I did:
1. Installed DrTom's Uptodate fix in device (see attachment).
2. Device prompts for soft reset-> say yes.
3. Make following registry changes using any registry editor like Sktools:
[HKEY_CLASSES_ROOT\CLSID\{8856F961-340A-11D0-A96B-00C04FD705A2}\InprocServer32]
default="shdocvw2.dll"
"ThreadingModel"="both"
Or if you have started using the new XDA_UC then
Download uptodate fix.txt from attachments in this post ----> rename it to uptodate fix.reg ---->copy and paste the uptodate fix.reg in \StorageCard\XDA_UC\SD folder ----> sit n njoy
Note you have to number both the files so that DrTom's fix installs before registry changes. I did it by renaming them to 01_DrTom UpToDate fix.cab and 02_UpTodate fix.reg!
4. Uptodate 17.3 works perfectly like it used to work on WM 6.1 ROMs!
5. Njoy and thanks a ton to DrTom for his wonderful fix!
P.S.: Internet explorer does not works with this fix but Opera works! So all surfing via Opera!
Thanks alot
It worked
Thanks a lot. It worked like a charm
drug database doesn´t work
neuroman said:
Thanks a lot. It worked like a charm
Click to expand...
Click to collapse
Sorry, but the drug database doesn´t work. When pressing Headings it freezes.
i want treat ....help me!!!!!!!!!!!!!!!!!!!!!
Uptodate 17.3 the drug database doesn´t work. When pressing Headings it freezes to how to treat for me <MY phone HTC HD2>
thank
hippo_chef said:
Sorry, but the drug database doesn´t work. When pressing Headings it freezes.
Click to expand...
Click to collapse
It works well on my Touch pro. Current Rom in my signature!
I hv installed opera 10 beta 3 as my default browser!
Working well with my OmniaII using GC lite rom(6.5.5). So great!!!, thank a million to you(DrTom). Now my problem with Uptodate have solved.
thanks, it saved my life!!
Somebody ecperience with Touch HD? because the program works, only i get a blank screen eventually...
shakemyass said:
Somebody ecperience with Touch HD? because the program works, only i get a blank screen eventually...
Click to expand...
Click to collapse
We're in the same situation !
Hi, my mobile is LG GM750 arena with WM 6.5. When i press the article tittle in uptodate 17.3 it freezes. I installed dr. tom and changed registry.
perramaja said:
Hi, my mobile is LG GM750 arena with WM 6.5. When i press the article tittle in uptodate 17.3 it freezes. I installed dr. tom and changed registry.
Click to expand...
Click to collapse
After the 1st of April UpToDate v17.3 stopped working. I should change the date of my phone(before the 1st of April) in order to make it work. It says some sh**s about expiration. Any fix???
Any news? Same problem to me..
I'm getting the message:
"The expiration date has been reached"
Could anyone help please?
Im not a expert but im fix the problem change the day of my windows phone. for example put it march 1 2009 and it works fine.
My uptodate 17.3 also expires. But i had the solution. Actually i found it incidentally. What i did is i went to the original 2577 folder in the iso dvd file , copy the cab file of the pocketpc sub folder, then paste it to pocketpc subfolder of 2577 folder in my pocket pc replacing the cab which i have taken from uptodate 17.2 to install the 17.3 to prevent card activation notification(which i think you have already done). Install the cab file agian on top of the previous installation.Open uptodate again. it works for me. I dont know how!!!!
Click to expand...
Click to collapse
by shaheen27
Easy Peezy
Dudes. You might consider the following totally useless text I wrote while playing with MortScript 4.3 for PPC.
#Basic script to set a system state while a program is running then reset it when program exits\
#Read registry setting
GetTime ( h, min, sec, d, mon, y )
#Set registry settings
SetDate ( 31, 03, 2010 )
#Path of application to run goes here
RunWait ("\Storage Card\Program Files\Favorite Prog Folder\FavoriteProg.exe" )
#Sets registry settings back to saved values when above program exits
SetDate ( d, mon, y )
Now, this could theoretically be useful for lots of stuff. Especially if one uses Total Commander to create a shortcut for the above script in \Windows\Start Menu\Programs\.
Updated registry fix to make it XDA_UC compatible!
hello! I tried all these and when i press the article tittle it brings white screen! i have the greek windows mobile 6.5 professional! any help?
With the help from Dr Tom. It seem to be execllent, but I soon recognised that it can not work if i set the current time / Anyone can help me to fix the problem.? Hepl me much. I promise to uninstall others else if Uptodate 17.3 work well.
--------------------------------------------------
JWMD Armids 1.0a
Ever want to change the number of columns in your Windows Mobile 6.5/x Start Menu without doing a lot of hardwork? Here's another tool to do the job for you.
Armids can change your the number of columns in your Windows Mobile 6.5/6.5.x Start Menu or Edit the Start Menu Item look or even change the Selection Background image!
--------------------------------------------------
Armids supports the ff resolutions:
QVGA
WQVGA
SqVGA
VGA
WVGA
Armids has this ff features:
Change the number of columns
Portrait
Landscape
Change Selection background not yet implemented
Restor original GridScene file from custom ROM or Original Firmware
- Backup occurs upon first use of the application.
--------------------------------------------------
Using Armids
Please make sure that your device is currently in Portrait mode.
KNOWN PROBLEMS
No effect after reset
You ROM uses custom GridScene that was setup in registry. I have not yet got any answer on Chefs thread about setting this up. So if you have any idea, please share.
This registry key has something to do with it "[HKEY_LOCAL_MACHINE\Security\Shell\StartMenu] "CustomGridForm"="StartMenuCust"
History said:
February 27, 2011
- Landscape support
- Fixed some null errors when reading the CPL file.
Click to expand...
Click to collapse
Guys when reporting an error
Kindly include this details:
Device Brand and Model
ROM, ROM Language, ROM Link
Error Message and Screenshots
What you did before the error shown.
tried it, just letting u know it doesn't work on touch pro2 running 6.5
orlandojumpoff said:
tried it, just letting u know it doesn't work on touch pro2 running 6.5
Click to expand...
Click to collapse
you might be using custom gridscene that was setup in registry which I tried to ask in Chefs thread.. and still no answer from them
Thanks for the feedback.
very nicely done. What program were you using in the first video to control your device with your pc? I've used several. Some I like more than others but they all have their faults/lack of capability.
scott8813 said:
very nicely done. What program were you using in the first video to control your device with your pc? I've used several. Some I like more than others but they all have their faults/lack of capability.
Click to expand...
Click to collapse
I was just using an Windows Emulator from Visual Studio.
but if you want a desktop app to control the screen of your winmo device; you can use My Mobiler. It's very very free!
Nice job seeing the videos, what about making it for HVGA aswell, tried it with hope but no luck on my HD mini
Nullstring said:
KNOWN PROBLEMS
No effect after reset
You ROM uses custom GridScene that was setup in registry. I have not yet got any answer on Chefs thread about setting this up. So if you have any idea, please share.
This registry key has something to do with it "[HKEY_LOCAL_MACHINE\Security\Shell\StartMenu] "CustomGridForm"="StartMenuCust"
Click to expand...
Click to collapse
That registry key tells the start menu engine to use a "custom" .cpr layout for the Start menu. The normal filename of for the start menu layout is StartMenu_GridScene_480x800.cpr , but if you have the registry key enabled, then windows looks for StartMenuCust_480x800.cpr . HTC does this by default in their stock ROMs, in order for windows to load their custom .cpr files. A pure windows ROM will look for a StartMenu_GridScene_480x800.cpr for example.
Some chefs choose not to mess with that and just StartMenuCust_480x800.cpr gets used. *I* for example, take that key out in my ROMs and I use StartMenu_GridScene_480x800.cpr . So you just have to account for both All you have to do is look for the registry key and if it's not there, then it's safe to say StartMenu_GridScene_480x800.cpr is the layout used.
Testing on HD2 T-mobile
Does not work on HD2 T-Mo Even after reset.
Running
Manila version 2.5
Rom/2.13.531.1 (90963) WWE
Hi Nullstring,
very well done, really. I have also a future request:
- what do you think about background changing?
-- That will be the right function for the CHTArtwork thead. Because i have to many ideas and can not do all the work .
Not working
xperia x1
wm 6.5.3
rom 826x wwe
It doesn´t work in HD2 European, ROM HTC 1.66.
Humongus1 said:
Does not work on HD2 T-Mo Even after reset.
Running
Manila version 2.5
Rom/2.13.531.1 (90963) WWE
Click to expand...
Click to collapse
So...I think this would be a great add on to our HD2's. Is there going to be an update?
hi nice app. but sadly dosent work on HD2 , hope works in a future cose is a god app to have.
I got it working on my European HD2 (Factory ROM) by editing the registry value - as mentioned in an earlier post in this thread. As suggested I changed the registry key HKLM\Security\Shell\StartMenu] "CustomGridForm" to say "StartMenuCust" instead of "StartMenuCust". after a soft reset the program worked.
simonwoods33 said:
I got it working on my European HD2 (Factory ROM) by editing the registry value - as mentioned in an earlier post in this thread. As suggested I changed the registry key HKLM\Security\Shell\StartMenu] "CustomGridForm" to say "StartMenuCust" instead of "StartMenuCust". after a soft reset the program worked.
Click to expand...
Click to collapse
ok my register key now is
HKLM\Security\shell\startmenu "CustomGridForm" = StartMenuCust
what do i have to chage from this register key to make the JWMD Armis work? becouse i didnt get what u said .
hi guys!! am so sorry for this issues. Just got back from vacation!
I'll see what I can do tonight!
for the mean time. the fix for this is..
if you have stock rom or your chef did not change any graphical changes in the start menu (other than number of columns) then:
create/update this registry
[HKLM\Security\shell\startmenu]
CustomGridForm="StartMenuCust"
to
[HKLM\Security\shell\startmenu]
CustomGridForm="StartMenu"
Hey just wanted to say thanks, very handy little app. Works fine for me on my TP2 running MightyRom official. Keep up the great work!
Nullstring said:
for the mean time. the fix for this is..
if you have stock rom or your chef did not change any graphical changes in the start menu (other than number of columns) then:
create/update this registry
[HKLM\Security\shell\startmenu]
CustomGridForm="StartMenuCust"
to
[HKLM\Security\shell\startmenu]
CustomGridForm="StartMenu"
Click to expand...
Click to collapse
OK,i will install it once again on my hd2 and try your modification...
It's me again,it didn't work and showed me this error msg below...