I have created a simple front end to Paradis_Pals change page pool through activesync method. This was done as an experiment, but seeming as it works, I thought I may as well let others use it.
Thanks to Korand for patching the batch files.
Download and unzip the files to anywhere.
Connect your device with activesync
Run l3v5y Change PP.exe.
Select the PagePool you want.
Wait a few seconds.
Soft reset your device.
Download (Change PP for WM6, WM6.1 for WM6.1 devices):
Below
Skydrive
thanks im going to try it as soon as i can...
console output:
>"pdocwrite" "6.nb" 0x36855A
3 partitions, 2 binary partitions
customerid=00000000 uniqueid= 00 00 00 00 20 2a 02 04 15 39 11 1e 15 0b 05 b8
CopyFileToTFFS(6.nb:0, 36855a, 00000001)
but nothing happend.. how i check if pagepool is changed? Settings->System Info -> memory??
great job my friend i will try
how i check if pagepool is changed? Settings->System Info -> memory??
Click to expand...
Click to collapse
Or
Setting, About???
Thanks...
Is Change PP E-ten X500+ compatible (WM6)? Tested?
What "rake" I have or will have?
Suitable for HTC Prophet only at the moment.
i'm new to all this...could you explaing what Page Pool is and benefits of its increasing?
Di-Ma-Z said:
i'm new to all this...could you explaing what Page Pool is and benefits of its increasing?
Click to expand...
Click to collapse
Copied from here: http://blogs.msdn.com/windowsmobile/archive/2005/11/17/494177.aspx
The Page Pool
Applications use RAM in two ways. There is code that runs, and there is data that is created while it is running. On a NOR device, the code can run directly from the ROM and not be loaded into RAM first. This process is called XIP (eXecute In Place). NAND devices can't XIP, so their code is loaded into RAM and executed from there. If you don't have a Page Pool, this code is loaded into normal RAM. The Page Pool is a mechanism to limit how much code is loaded into normal RAM. With a Page Pool, we can unload code that hasn't been used in a while and reload it later if we need to. We can't do that without a Page Pool.
LordDeath said:
Copied from here: http://blogs.msdn.com/windowsmobile/archive/2005/11/17/494177.aspx
The Page Pool
Applications use RAM in two ways. There is code that runs, and there is data that is created while it is running. On a NOR device, the code can run directly from the ROM and not be loaded into RAM first. This process is called XIP (eXecute In Place). NAND devices can't XIP, so their code is loaded into RAM and executed from there. If you don't have a Page Pool, this code is loaded into normal RAM. The Page Pool is a mechanism to limit how much code is loaded into normal RAM. With a Page Pool, we can unload code that hasn't been used in a while and reload it later if we need to. We can't do that without a Page Pool.
Click to expand...
Click to collapse
Please tell me which size of Page Pool is best for HTC Prophet?
thanks so much
I can tell you only my personal experience:
Compared to the previous 8MiB Pagepool on my device the 4MiB Pagepool is not slower, but I have more free memory.
The bigger the Page pool, the more programs you can run at the same time without the system being dodgy. You have less RAM available for your programs though.
6MB should be enough in both ways (free ram and amount of apps you can start simultaneously) If not, try 8MB.
You can go up, but only if you have more than 64 MB of ram in your device, then it won't hurt to have more Page pool imho.
helllo, I'm new in the world of the cooking, and i want change PP on WM6.1 on the OS.nb or MyRom.nbh
A solution exists for this release of Windows Mobile ??
Sincerely
Is it for a prophet ROM? as far as I can remember, the prophet uses *.nbf...
You should be able to use this with nb2nbf program, but I'll need to find the start address...
edit: start address is: 0x58956...
Sorry, i've don't see that this section isn't good, I've a HTC elf and not a prophet !
But I don't find for Elf !
Something is wrong...
I wanted my PagePool to 4MB...but at least i only have 44MB RAM instead og 52MB...
6MB PagePool is working fine...
Can you please fix the 4MB-Problem?!
I think that means it has flashed the wrong PagePool size. I shall see what is wrong, and try to fix it as soon as I can.
l3v5y said:
I think that means it has flashed the wrong PagePool size. I shall see what is wrong, and try to fix it as soon as I can.
Click to expand...
Click to collapse
Thanks a lot
One quick thought: Prophet Tools (link in my signature) has the WM6.1 page pool settings. See if that works for you and if not I'll check that out as well.
l3v5y said:
One quick thought: Prophet Tools (link in my signature) has the WM6.1 page pool settings. See if that works for you and if not I'll check that out as well.
Click to expand...
Click to collapse
Oh...this is a great tool
But i can do what i want....my RAM is not more then 50MB...and this is the result when flashing the PagePool to 6MB...
But i want to have to Flash the PagePool to 4MB, so that i have 52MB RAM
Please fix this...thanks...
Related
So I felt bad about *****ing at a bunch of n00bs so I wrote up a quite guide specific to PDAViet roms since that's what I use.
http://wiki.xda-developers.com/index.php?pagename=PDAViet Upgrade Tips and Tricks
If you have a tip/trick relating to any PDAViet rom, you can PM me to add something, or better yet, since this is a wiki, ANYBODY can edit it. just click the "edit" button at the bottom and just follow the syntax. I'll probably check now and then to fix up formatting issues, but we all need help with content.
mr_yellow said:
So I felt bad to *****ing at a bunch of n00bs so I wrote up a quite guide specific to PDAViet roms since that's what I use.
http://wiki.xda-developers.com/index.php?pagename=PDAViet Upgrade Tips and Tricks
If you have a tip/trick relating to any PDAViet rom, you can PM me to add something, or better yet, since this is a wiki, ANYBODY can edit it. just click the "edit" button at the bottom and just follow the syntax. I'll probably check now and then to fix up formatting issues, but we all need help with content.
Click to expand...
Click to collapse
Nice work! I'll be installing 4.0.0.0.0.0.00.0.0.0.000.6 (kidding ) tomorrow, maybe I'll write some help
mr_yellow said:
So I felt bad about *****ing at a bunch of n00bs so I wrote up a quite guide specific to PDAViet roms since that's what I use.
http://wiki.xda-developers.com/index.php?pagename=PDAViet Upgrade Tips and Tricks
If you have a tip/trick relating to any PDAViet rom, you can PM me to add something, or better yet, since this is a wiki, ANYBODY can edit it. just click the "edit" button at the bottom and just follow the syntax. I'll probably check now and then to fix up formatting issues, but we all need help with content.
Click to expand...
Click to collapse
Thank you for your nice work! It's very helpful for newbie
Commom Glitch
Hi,
I guess this is 'Bible' for Nubes Gr8 work Yellow... But I think we might have to add one more common problem - The vanishing act of email accounts... I didint edit it since i donno the reasons or the work around... Could some one update that????
Riyaz Hyder
Updated it with new info...
Again, updated with a short thing about losing settings while soft resetting.
Hello,
Please add this, how to change the pool size
1) download XVI32 (freeware hex editor)
2) open OS.nb
3) find ascii NKKD8
4) find it again (next occurance)
5) find hex value FF FF FF FF FF FF FF FF 9B 4F FF FF 64 B0
6) you will see "8C 00 00 C0 00 00". the pagepool size is C0 (which is 12MB)
7) change it to 80 to have 8MB, or 40 60 for 4MB 6MB respectively.
8) save and reflash
if you backup everything before reflashing the same rom and restore after the flashing (using spb or sprite backup) everything should be fine.
Click to expand...
Click to collapse
Thanks for the submission. I've added it. It's not really pdaviet related so I added it to the ProphetFAQ and make a link.
FYI to the everyone. The wiki is editable by anyone. If I'm not responding, you can add stuff you feel is important to the wiki yourself. Don't be afraid to click the edit button!
I use the lock password and there is no problem for me... I used it with pdaviet, pdamobiz and gollum roms...
I think the lock password isn't saved if you soft reset. Try locking the device, THEN soft resetting.. do you have the guts to try? only option afterwards is to hard reset... =)
UPDATED NOVEMBER 11, 2007
SIM TOOLKIT MINOR FIX: 20070927B3WWE
Download 8PP: megaupload | rapidshare | mediafire
Download 6PP: megaupload (thanks homer285!)
REPORT:
Hebrew Support known to work!
Thai-G fully working!
CE Star fully working!
UPDATED NOVEMBER 10, 2007
BUG FIXES: OS 5.2.1908 (Build 18508.0.7a.0)
2nd Boot Screen Fix
Backlight Icon Fix
Boot Phase Modification
Catalog Marketplace (removed)
Certificate Installation Issues (BIG THANKS TO HELMI_C)
Contacts 3x Open Freeze Fix
Default IM Selection Fix
HTC Home Plugin (removed)
HTC Intellipad Dialer (removed)
HTTPS website fix (tested on one site only)
Internet Caching Lag Fix
O2 Album Update to WM6
O2 Image Editor Update to WM6
SPB Pocket Plus 4.0 install fix
SIM Manager Update (untested)
SIM Toolkit Fix (SIM contacts will display again)
Services Quality Monitoring (removed)
Start Menu Sound Fix
System Enchancement Tweaks (too many to mention)
VOIP Modules (removed-not working properly)
Windows Live 10.6.0032.2100 update
WiFi Self-On Fix
WM5torage 1.75 Upgrade
WM5 Bluetooth Drivers / A2DP
XIP Core Upgrade
ROM: 20070927B2WWE
DOWNLOAD: megaupload | rapidshare
Additional Note: It has been brought to our attention that some users flash TEST ROMs and ask support for third party apps. This UNOFFICIAL ROM is still under development and you can't expect support from it. If you can't afford to have a buggy phone, this is not for you. By flashing this TEST ROM, it means you are willing to take the risks, solve any bugs encountered yourself and report problems to this forum.
HOW TO REPORT A PROBLEM:
1. INDICATE ROM VERSION
2. DEVICE AGE / PURCHASE DATE OF ATOM
3. SOFTWARE INSTALLED (STATE THE SEQUENCE)
4. STATE THE PROBLEM
5. HOW TO ARRIVE AT THE PROBLEM (SCREEN SHOTS WOULD HELP)
6. IF SOLUTION IS FOUND, PLEASE SHARE
----
UPDATED SEPTEMBER 29, 2007
NOT FOR ATOM EXEC NOR HP6800 SERIES.
(Some people never read; thus, the large text)
Major Bugs from AKU0.3.0 Fixed! except VOIP. miniSDHC support!!!
Version:
Windows Mobile 6 Professional AKU0.7.0
CE OS 5.2.1413(18508.0.7.0)
DOWNLOAD For XDA Atom / Atom Pure ONLY:
4MB PAGEPOOL : 54.4MB Program Memory : | mediafire | megaupload | rapidshare |
6MB PAGEPOOL : 52.4MB Program Memory : | mediafire | megaupload | rapidshare |
8MB PAGEPOOL : 50.4MB Program Memory : | mediafire | megaupload | rapidshare |
NOTE: IF YOU DON'T WANT TO DOWNLOAD AGAIN, YOU CAN CHANGE THE PAGEPOOL YOURSELF. INSTRUCTIONS HERE
Thank you, ironeagle, for the rest of the links!!!
ROM Revisions:
Please see System Info under Settings for a summary of revisions. Place all your favorite CAB installers on your SDCard inside \cab\ folder. The original AutoInstall feature has been completely replaced by an AutoInstall script by serialzs for full device customization. O2 connect has been removed including O2 update (when was the last time we had an update from O2?) Built-in SPB GPRS has been removed because it is incompatible with system version.
Upgrade Procedure:
1. Put device to bootloader mode: (CAMERA+RESET)
2. Connect device to PC under Windows XP using USB cable
3. Run the executable ATOMWM607...EXE
4. Follow on-screen procedure
Reported Bugs and/or Incompatibility:
CE Star
Bluetooth PAN - not supported yet
O2 PhonePlus conflicts with smart dialing feature of WM6
Ringo
Spb Phone Suite / Mobile Suite
Known to Work Fully:
Internet Sharing over USB
Intellidialer (PhonePad)
Resco Explorer 2007
Spb Mobile Shell (latest edition)
Acknowledgements:
I would like to extend a very special thanks to cmonex for giving valuable support to ROM porting. helmi_c for opening new horizons for the Atom. buzz_lightyear for his unending support.
For the great tools:
1. mamaich IMGFS tools
2. scoter community for the Scoter Kitchen
3. bepe's unique tools
4. serialzs custom DSUU and romtoolz
For all the beta testers who gave valuable feedback... and everyone else who have helped and I failed to mention.
and to my friend- Simon
Special Note:
This is NOT an OFFICIAL ROM. You can not expect support from O2 by bringing in your device with this ROM. Neither should you contact them for support on this ROM. By downloading and upgrading your device with this ROM, you agree to the considerable risk of bricking your device; and that I can not be held liable for damage brought about by the usage of this ROM.
Jiggs
Side Note: This will not SIM unlock or change your mobile serial no. (IMEI) in any way. You can flash back to original ROM anytime! Do not attempt to flash this on ATOM EXEC! If you get COUNTRY ID ERROR, you did not follow steps above. Do NOT restore from spb / sprite full backup, this will overwrite system files and make your device unstable; worse, unusable.
NEVER ATTEMPT TO UPDATE YOUR DEVICE USING SD CARD FLASHING!!!
Official XDA Atom WM5 AKU2.2 WWE Thanks MightyOX!
To everyone who tested this ROM:
When I say this is for evaluation only, it means you are to test this ROM. It is not a perfect ROM. We will never know the bugs unless it is subjected to different scenarios. You can not also expect to have every solution to every problem encountered in this ROM. You can, however, do your part and contribute by finding a solution yourselves. I cannot do this alone, and this is not the only thing I do. I posted this ROM to share with everyone else, and get to enjoy more features for our neglected device. If you are not contented, you can always go back to the previous ROM of your choice. We are not forcing you to use this ROM. Please don't make demands here...
Jiggs
Good work!!! Make this ROM for Atom exec support miniSDHC...
Is this the same as the one you PM'd me with? <.<
I'm still going to test the beta to see if the SDHC drivers work, tho.
What is the difference between various page pool sizes. How do I decide which one I need.
Ultimate Chicken said:
Is this the same as the one you PM'd me with? <.<
I'm still going to test the beta to see if the SDHC drivers work, tho.
Click to expand...
Click to collapse
more or less... hope SDHC works! only some minor changes. I had to change pagepool to have different program memory requirements. been using 4mb since yesterday, graphics is lagging but processing power is still the same result as per benchmarking.
Thanks again JIGGS....your update is keep on coming , blessing from you for our atom.. MANY THANKS
yes right, can you explain to us the pagepool differences? which is better of this 3?
JUST A REMINDER GUYS...so no one will have a dead ATOM!
NEVER ATTEMPT TO UPDATE YOUR DEVICE USING SD CARD FLASHING!!!
Can I run the old extended rom setup on this??
generalriden said:
Thanks again JIGGS....your update is keep on coming , blessing from you for our atom.. MANY THANKS
yes right, can you explain to us the pagepool differences? which is better of this 3?
Click to expand...
Click to collapse
I can't tell you which is better. You have to try it. Different users have different requirements. It's a trade off between graphics speed and available program memory. processing speed is not affected by it based on my benchmarking tests.
Mirror needed
Any1 can provide a mirror on megaupload or wikiupload?
Thx!
PS: Jiggs, very nice job!
DOWNLOAD For XDA Atom / Atom Pure ONLY:
4MB PAGEPOOL : 54.4MB Program Memory : | mediafire |---->SO THIS ONE HAVE THE BIGGEST FREE PROGRAM RAM AVAILABLE? AM I RIGHT JIGGS? THANKS... i just want to clarify everything..
6MB PAGEPOOL : 52.4MB Program Memory : | mediafire |
8MB PAGEPOOL : 50.4MB Program Memory : | mediafire |
I don't advise you to sacrifice too much pagepool for program memory, tho - WRT experience from the WM5 builds, a large pagepool actually speeds up your device. If you don't wish for the Atom 1st Gen ROM experience (and, given that the unit I own used to belong to my first adopter sister, I'm well familiar with that), take the 6MB PP at least.
By the way, folks, I have "moved" my "sig". For great justice. ^_^
By the way: You know those default program cabs Jiggs puts into the extROM? It's safe to delete them if you don't intend to install them (you must install the extROM unlock first, however). Just as long as you don't touch anything that doesn't look like an official program install or directory, you should be safe - and you get to use your extROM as an install location. Hard reset and soft reset still works correctly without them around, so if you plan to use your extROM and need the real estate, go right on ahead.
(I wonder what happens if I hard reset with a custom cab in there... tho I'm a little too lazy to reinstall everything right now.)
Any chance of an update for the o2 atom exec?
Ultimate Chicken said:
I don't advise you to sacrifice too much pagepool for program memory, tho - WRT experience from the WM5 builds, a large pagepool actually speeds up your device. If you don't wish for the Atom 1st Gen ROM experience (and, given that the unit I own used to belong to my first adopter sister, I'm well familiar with that), take the 6MB PP at least.
By the way, folks, I have "moved" my "sig". For great justice. ^_^
By the way: You know those default program cabs Jiggs puts into the extROM? It's safe to delete them if you don't intend to install them (you must install the extROM unlock first, however). Just as long as you don't touch anything that doesn't look like an official program install or directory, you should be safe - and you get to use your extROM as an install location. Hard reset and soft reset still works correctly without them around, so if you plan to use your extROM and need the real estate, go right on ahead.
(I wonder what happens if I hard reset with a custom cab in there... tho I'm a little too lazy to reinstall everything right now.)
Click to expand...
Click to collapse
contrary to our experience in WM5, WM6 didn't suffer as much LAG as it did during the past. In fact, I'm still using the 4MB without any complaints. I don't know for others who play games on their ATOM....
How's SDHC my friend? working?
Ultimate Chicken said:
I don't advise you to sacrifice too much pagepool for program memory, tho - WRT experience from the WM5 builds, a large pagepool actually speeds up your device. If you don't wish for the Atom 1st Gen ROM experience (and, given that the unit I own used to belong to my first adopter sister, I'm well familiar with that), take the 6MB PP at least.
By the way, folks, I have "moved" my "sig". For great justice. ^_^
By the way: You know those default program cabs Jiggs puts into the extROM? It's safe to delete them if you don't intend to install them (you must install the extROM unlock first, however). Just as long as you don't touch anything that doesn't look like an official program install or directory, you should be safe - and you get to use your extROM as an install location. Hard reset and soft reset still works correctly without them around, so if you plan to use your extROM and need the real estate, go right on ahead.
(I wonder what happens if I hard reset with a custom cab in there... tho I'm a little too lazy to reinstall everything right now.)
Click to expand...
Click to collapse
THANKS for the advice bro..maybe i will try to see the difference of both. One of my friend will install a different pagepool and we will compare.
adtl advice, just copy those cabs you will erase to your SD card then maybe oneday, someone or you may need it ;-)
davidw89 said:
Any chance of an update for the o2 atom exec?
Click to expand...
Click to collapse
I have commissioned chartreux to do it. After all, he has the device to test the build. I wouldn't want to risk another davidw89 if you know what I mean.
Extended Rom
Actually, you don't need to unhide the Hidden Partition. You just need Total Commander and key in \_QHiddenPartition\ and perform normal operation (copy, delete, etc.)
jiggs said:
contrary to our experience in WM5, WM6 didn't suffer as much LAG as it did during the past. In fact, I'm still using the 4MB without any complaints. I don't know for others who play games on their ATOM....
How's SDHC my friend? working?
Click to expand...
Click to collapse
for me, i will just play heavy games on my PSP..hehehe better.. ATOM is a PDA for me and a mobile. only if im waiting someone , i will play pacman or bomberman on my atom, bowling maybe or chess, thats it..
guys, those WHO ARE PLAYING USING THEIR ATOM, please install 4mb pagepool and give us a feedback.
meh.........................
thanks again jiggs.........
Is thier a way to make the page pool smaller. I don't care if my device runs slower it is better than doing a soft reset a couple of times a day.
their is a tool called pagepoolchanger for this and you can change it before flashing you just need to use it on ruu file first you can get it on ppc geeks or i can send you it if you need just pm me your email
i tried all the pagepool changers out there.. none change it below 6mb on the official 6.1
You can change the page pool with ppc kitchen..
cali_boxer_916 said:
You can change the page pool with ppc kitchen..
Click to expand...
Click to collapse
for the 6.1 it changes the hex during the first ff ff ff, etc sequence.. not the second one.. if you want to change it.. from ppc kitchen keep it at 6mb and then go in manually using a hex editor and change it your self in the SECOND ff ff ff series hex code for the page pool. thats what i did.. n finally it worked!
uhh, this pagepool changer goes down to 4.00 if you wanted it.
Prophet ROM CE OS 5.2.20924 Clean(Build 20924.1.5.0 PV )
Anybody want to try?
This ROM originally cooked by Lamson (PDAVIET), cleaned by me, contain only Office (minus Onenotes) and UC ready.
Thank's to Lamson (PDAVIET) for the creative ROM production
Download link:
Mediafire
Mirror link"
Down (looking for another)
Features of this rom and Memory usage stats please?
THX DEAR legedug
rahulganatra said:
Features of this rom and Memory usage stats please?
Click to expand...
Click to collapse
Its clean my dear friend.
Only Office (minus onenote) and basic ppc soft such as calculator, networkwizard, and sim manager.
Why is this ROM consuming lot of memory then. only 23.6 mb free RAM ? Storage is quite impressive but if u get around 30 MB free then a clean rom is worth it, you can load a shell on top which on an avg will consume between 3-6MB
rahulganatra said:
Why is this ROM consuming lot of memory then. only 23.6 mb free RAM ? Storage is quite impressive but if u get around 30 MB free then a clean rom is worth it, you can load a shell on top which on an avg will consume between 3-6MB
Click to expand...
Click to collapse
Its because of the page pool and usually for the first loading time, it use RAM, consider freeing the RAM after.
Mine, after installing 12 softs on main, 8 softs on extended, and 28 soft on storage card the sorage remain 27.72MB and program 13.83MB.
another reason for small amount of ram is that lamson's roms are set to have 4mb system cache that can be change under advanced config or any registry manager
i use 1 mb cache and 4mb pp and in any rom thats is kinda clean, can get at least 30 mb free ram
HI Legedug:
Would you like to upload a link in RADPIDSHARE using free account,cz I can not connect mediafire here in PEKING china.Thanks in advance...
legedug said:
Prophet ROM CE OS 5.2.20924 Clean(Build 20924.1.5.0 PV )
Anybody want to try?
This ROM originally cooked by Lamson (PDAVIET), cleaned by me, contain only Office (minus Onenotes) and UC ready.
Thank's to Lamson (PDAVIET) for the creative ROM production
Download link:
Mediafire
Click to expand...
Click to collapse
Mirror link:
Rapidshare
Thanks,download has been well done
legedug said:
Mirror link:
Rapidshare
Click to expand...
Click to collapse
legedug said:
Mirror link:
Rapidshare
Click to expand...
Click to collapse
Hi, the following error occur while downloading from Rapidshare:
Error
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.
Hi,
Thanks for this new ROM.
How can I put (or restore?) original green Windows 6.1 theme and backgound?
For my job , I need sometimes to make screen shots and it should be as close as a supposed original ROM.
Tia
C.
legedug said:
Its because of the page pool and usually for the first loading time, it use RAM, consider freeing the RAM after.
Mine, after installing 12 softs on main, 8 softs on extended, and 28 soft on storage card the sorage remain 27.72MB and program 13.83MB.
Click to expand...
Click to collapse
oh my GOD
another very clean and very new build rom
i'm downloading it now
i was just getting used to your 20759 claen rom after 20 days with no problem
but i have one question :
how do you backup or restore all your programs on a new rom ?
do you reinstall all of them one by one ?
or you use soem software for that.
i tried spb backup but long time ago but was no good
i need somthing to only restore the installed programs and their settings in the registry.
thanks a lot
jullien said:
Hi,
Thanks for this new ROM.
How can I put (or restore?) original green Windows 6.1 theme and backgound?
For my job , I need sometimes to make screen shots and it should be as close as a supposed original ROM.
Tia
C.
Click to expand...
Click to collapse
You mean Windows mobile green theme?
Just put this file/tsk (extract before) on windows folder, then change the theme on "settings, today, theme" with that theme.
ahwaztaxi said:
oh my GOD
but i have one question :
how do you backup or restore all your programs on a new rom ?
do you reinstall all of them one by one ?
or you use soem software for that.
i tried spb backup but long time ago but was no good
i need somthing to only restore the installed programs and their settings in the registry.
thanks a lot
Click to expand...
Click to collapse
Yup, that is my problem also.
But I use one soft from this forum to install apps, its called Cabbatchinstall.
It can generate a list of softs on storage card and install one by one by its self (or skip it).
The UC only install on main memory but this soft can install on storage card or even extended_rom.
Here is the softs.
smarvest said:
Hi, the following error occur while downloading from Rapidshare:
Error
This file is neither allocated to a Premium Account, or a Collector's Account, and can therefore only be downloaded 10 times.
This limit is reached.
To download this file, the uploader either needs to transfer this file into his/her Collector's Account, or upload the file again. The file can later be moved to a Collector's Account. The uploader just needs to click the delete link of the file to get further information.
Click to expand...
Click to collapse
Hemmm...
Stange behave for Rapid.
I did not do anything, but I also received the same error (even I, is the uploader).
So for momentary, use the mediafire instead. I 'll try to upload to another.
legedug said:
Yup, that is my problem also.
But I use one soft from this forum to install apps, its called Cabbatchinstall.
It can generate a list of softs on storage card and install one by one by its self (or skip it).
The UC only install on main memory but this soft can install on storage card or even extended_rom.
Here is the softs.
Click to expand...
Click to collapse
A very useful program, Bro. Thank you.
legedug said:
You mean Windows mobile green theme?
Just put this file/tsk (extract before) on windows folder, then change the theme on "settings, today, theme" with that theme.
Click to expand...
Click to collapse
Thanks! I'll try it. I've try another one, the main screen was green but other programs (for example calc) was still back.
If I rememeber well, your previous ROM had geen call win green theme was selected. In the mean time, I've found BlackDiamond theme that looks as an orginal one. It's also Ok for me.
I'm really happy with your good ROMs
C.
Does it support Asia area?
the rom was maybe lose more power?
when I sleep about 7 hours.... it lose amous 20% of power?
Finally also the Hurricane kitchen for OS Builder. You get WM6.0, WM6.1 (from Rose) and WM6.5 (from Captain/Maple) based XIP/SYS/package in the kitchen with the OEM parts from my batch-kitchen for Hurricane which was largely ported from the Tornado WM6 kitchen done by nitrogen.
You need OS Builder (see link above) and the archive from below link, then:
- Install OS Builder
- unpack the archive
- go to the relevant folder (WM60, WM61 or WM65)
- double-click on the file "OSBuilder.osb"
- push the green "play" button in the button bar -> see the build being created
- at the end you get OS.BIN along the OSBuilder.osb file
- upload this to your device via MTTY "l" (load) command
Mind that the MTTY can have 2 presets for the "load" command by pushing the "F" button in the toolbar. Set the "Download Command" to just "l" (the lowercase letter "L" without quotes) and select the "First time download file name" with the "..." button to the OS.BIN that you have created. So instead of typing (no quotes): "l my-path\os.bin" in the MTTY window, just push the Button "1" aside the "F" button. In case not present enter for the "mask ROM start address" just 00000000.
Kitchen is located here:
http://www.mediafire.com/?h6d6e1wslcsdk <- click me
If you have a shipped ROM still on your Hurricane, some more steps have to be done. The relevant tools are in the \tools folder of the packages. Follow the sequence in the folder "tobbbie-prepare-flashing-(one-time-per-device)". I had started to link that to the OSB Tools menu as well but this is not complete.
tobbbie, tnx for the kitchen!
Does backlight driver work good on wm 6.5?
Thanks!
Backlight works as it should - no difference between builds. Mind that the backlight has some quirks on the Hurricane. Some settings are useless (set to 'ff) and sometimes (within the settings menu, I think) keypress seems not to reset the backlight count-down, nothing severe though.
Compared to my batch kitchen here all the UPX-ed stuff is removed as it eats much more RAM per UPX-ed program. Mind that the use of the paging pool is not commonly understood. In short:
all exe/dll code is running within the paging-pool RAM space if possible.
if parts of the code are not accessed, the oldest code copy is discarded in the paging pool if new code needs to run
if the code is accessed again, it is loaded back from ROM to paging pool RAM and executes from there
So small paging pool -> slow device: the OS is busy swapping code in/out
UPX-ed exe/dll cannot load parts of the code from ROM as only the whole file can be read and decompressed to RAM. So if such code is run, it reserves the whole required RAM for its code, however outside the paging pool.
Better is that not UPX-ed run inside the paging-pool RAM and eat nothing extra for code space and well co-exist with other programs depending on their execution needs.
SDHC on Hurricane (and Typhoon)
20121003 Update (since no new posts allowed anymore):
Just to let you know: The SDHC lets the device also read FAT32 formatted SDXC cards (e.g.64 GB). It even reads more than one partition (I have 2 on my Android) and mounts both of them (32k Cluster size used).
Not sure how well the performance will be when managing data there - but reading a large music collection should be ok
More good news:
It seems that the SDHC support from Tornado also works on the Hurricane (even the Typhoon!). By replacing the drivers and related entries in the .rgu, the device still boots and gets access to an SDHC card (4GB, 8GB). Export via WM5torage works as well and chkdsk does not report problems for a 5GB full 8GB card.
It may still require some more testing - but finally all that I wanted to have on these devices is finally there
Will post the updates soon (just a few KB) -> DONE, advice included in ZIP.
This probably could even be done via a CAB file - but I will not check this.
tobbbie said:
More good news:
It seems that the SDHC support from Tornado also works on the Hurricane (even the Typhoon!). By replacing the drivers and related entries in the .rgu, the device still boots and gets access to an SDHC card (4GB, 8GB). Export via WM5torage works as well and chkdsk does not report problems for a 5GB full 8GB card.
It may still require some more testing - but finally all that I wanted to have on these devices is finally there
Will post the updates soon (just a few KB) -> DONE, advice included in ZIP.
This probably could even be done via a CAB file - but I will not check this.
Click to expand...
Click to collapse
Thank you!It's great news!I post it on wce.by and 4pda.ru!
sniper304 said:
Thank you!It's great news!I post it on wce.by and 4pda.ru!
Click to expand...
Click to collapse
Just go ahead, I hope there is a larger community than here at xda-developers. I feel lonely with my addiction to candy-bar smartphones
Everyone so proud of carrying a large touch brick in their pockets, sigh.
You should try out yourself first though before posting further.
tobbbie, i lost my mobile phone =(((
tobbbie
Thank you for your phone HTC Hurricane (since I lost my!)
Today finished russification your kitchen based on the OS Builder - for htc hurricane!
Russification about 99%. =)
All files sorted!
All ROM's checked-all works great!
here is link http://www.mediafire.com/?dpdx3zmvbaxn3mi
Thank you tobbbie!!!
P.S. WOW, I forgot to say that now cab files are not deleted after installation!