Related
Not to be redundant with other threads, but to compile in one place, maybe we can list in this thread the known issues in the new Cingular ROM, with links to the other threads where solutions/ideas are being discussed. Some of those which come to mind are the following:
Goodlink Integration with Dialer not Working
PIE Proxy Issues (and related VPN troubles)
SD Card Not Reading Correctly
Disappearance of SmartDialer ... which should be fixable with the cab file located here.
Additionally, know helpful registry tweaks are being (and should be) compiled here
And finally, some helpful fixes/mods:
PTT Fix - to take back control over the PTT button (especially useful if you don't plan to use PTT)
BandSwitch - to manage your connections (and thereby increase battery life)
Well, this is just a start.
What are the SD problems? I haven't run into anything yet...
Check the link I provided on the first post.. many folks (myself included) have intermittent problems where the directories on the card are no longer visible (until after a soft reset and/or removal and re-insertion of the card).
Bummer. I hope that doesn't hapen to me. But if this XDA-Lives ROM is released, hopefully I won't be using Cingular's (AT&T's) 2.06 ROM much longer!
Some, including myself, have lost SmartDialer.
I'm trying to find a solution.
berdinkerdickle said:
Some, including myself, have lost SmartDialer.
I'm trying to find a solution.
Click to expand...
Click to collapse
Yeah, I have this problem too. Luckily I've been using the E-Ten Dialer, so I'm not used to the Smart Dialer. But it'd be nice if I had it available, since I'm not using E-Ten anymore.
A lot of people use PTTfix. Might want to put a shortcut to sleuth's thread, as his latest release apparently fixes the issues with it. (I'll post it if I happen to stumble across it in my journies of trying to catch up with the latest posts.)
EDIT: Here's the thread: http://forum.xda-developers.com/showthread.php?t=279585
sk0t said:
A lot of people use PTTfix. Might want to put a shortcut to sleuth's thread, as his latest release apparently fixes the issues with it. (I'll post it if I happen to stumble across it in my journies of trying to catch up with the latest posts.)
EDIT: Here's the thread: http://forum.xda-developers.com/showthread.php?t=279585
Click to expand...
Click to collapse
Yes, but is that really an issue or a feature? I am sure Cingular would consider it a feature, but everyone knows it's total crap.
Smart Dialer coment:
Some are having issues with new ROM and no smart dialer. I had no problems, but I also know that installing ETen Big Button Dialer (available at 8525software.com) disables Smart Dialer. So I tested it. Install ETen and as supposed too, no smart dial. Then I unistall ETen and the smart dial is back working ok. Also in the phone screen the right soft key has an option for the Smart Dialer, make sure it is turned on.
Now if anyone can get ETEN to work WITH smartdial, that would be cool.
I could not get E-Ten to work with SmartDial, though purportedly you can... see link here for discussion on this issue.
If you do get it working, an easy step-by-step would be appreciated!
richy240 said:
Yes, but is that really an issue or a feature? I am sure Cingular would consider it a feature, but everyone knows it's total crap.
Click to expand...
Click to collapse
Heh.. I definitely consider it an issue.. Cingular does say feature no doubt, but I should still have the ability to remap that button. Hence the reason I suggested it.
I added it to the first page (which I am updating as folks add thoughts)
http://forum.xda-developers.com/attachment.php?attachmentid=33088&d=1168703772 Try this Smart Dial Cab
That fixed it for me.
Thanks Wpbear and MVT.
Updated the Wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Registry
Eten Dialer WITH SmartDial Works for me but the ATT name is scrunched up a little.But everything works.
SEE My next post. Soory
Were you intending to attach files to your last post? Not sure I can follow it.
This has Portrait and Landscape Mode w/Smart Dial, Look pretty good.
Excellent -- seems to work .. now I will see if those black glass skins work with it -- thanks
weinson said:
I unzipped it ... just install the cab file, restart, and it should work ... or am I missing something? At the moment I don't have any version of the e-ten dialer installed (do I need to do that first?)
Click to expand...
Click to collapse
No the zip with the cab has the smartdialer and the ETEN buttons.
Hey guys, its angel12 from ppcgeeks. Just had some time tonight to work on my kitchen and get a new rom up hope this one works as well as my last one did. Whole new kitchen, had some help from neman on ppcgeeks, as well as llama, and a huge thanks to DCD!
heres what it includes:
flash lite
flash player
wmirc
allmobilemines
dopewars
dotfred task manager
jbed java
htc home 2.1
null keyboard
sipchange
htc random access
htc cube (includes ftouchflo)
wmwifirouter
flash vid bundle
musicid
tcpmp
alarmclock
calender plus
call firewall / wifi hitchhiker
tasks plus
whirlwind 21
mms 3
pocket rar
vistahide batt gauge
wktask
total commander
msvc
and a couple extra goodies
HOW TO:
flash new spl (if you havent already)
flash new radio (if you havent already)
flash new rom (if you havent... oh wait, duh)
on first boot, soft reset before customizations run, then hit yes as it tries to fun ftouchflo and sipchange (you shouldnt have to do this again)
enjoy!
ftp://up.ppcgeeks.com/Titan/Users/angel12/
user: ppcgeeks
pass: ezupload
I had to downgrade the mms because i could not get it working. Might take a look at it today. Couple of bugs so far:
Cant use d-pad to select tabs in any program (usually once you get to the bottom of the icons it would start to select the tabs)
Aligning screen after first boot locks the device.
if you have any more bugs please post them here!
Also, if you live in a Rev. A area, please let me know if you are getting Rev. A speeds!
looks that im to be the first to test, if your uploading now of coarse.
rom is up
wats the pass for the ftp?
or wat do i put in on *username* and *password*?
richardrk said:
or wat do i put in on *username* and *password*?
Click to expand...
Click to collapse
username: ppcgeeks
password: ezupload
THX, ...and did you say that this is for sprint or verizon?
richardrk said:
THX, ...and did you say that this is for sprint or verizon?
Click to expand...
Click to collapse
sorry, vzw right now, it says so in the file name
fallingup said:
sorry, vzw right now, it says so in the file name
Click to expand...
Click to collapse
Awesome work angel12! We need to figure out RevA for VZW
Yeah, i know. Ive talked to a couple people that have it working, and they are "young" in the forums, so i doubt they had to do anything special. Which is just weird that ours doesnt work.
Any plans on making a Sprint ROM?
Thanks,
All of this rocks.
I upgraded to your newest. I actually like your last Rom better. Better dialer, large start menu, Touch Calc, etc. Are any of those coming back in?
Could someone answer these two questions for me. Because I am sure kitchens are coming soon.
1. What is the advantage or disadvantage of putting a program in the Rom as opposed to adding it as a .cab install? Speed?
2. Say a newer program such as Live Search or S2U2, where new versions are coming out more often. Would those be better as an install or ROM. What happens when Microsoft Live is in a ROM and then they push a new version to you?
Thank you for answering these questions. Again thank you for this work !!!!!
blizzard07 said:
All of this rocks.
I upgraded to your newest. I actually like your last Rom better. Better dialer, large start menu, Touch Calc, etc. Are any of those coming back in?
Could someone answer these two questions for me. Because I am sure kitchens are coming soon.
1. What is the advantage or disadvantage of putting a program in the Rom as opposed to adding it as a .cab install? Speed?
2. Say a newer program such as Live Search or S2U2, where new versions are coming out more often. Would those be better as an install or ROM. What happens when Microsoft Live is in a ROM and then they push a new version to you?
Thank you for answering these questions. Again thank you for this work !!!!!
Click to expand...
Click to collapse
this is my first with a rebuilt kitchen, those items are coming back, i just didnt realize they were missing until today
and putting programs in rom is nice when you have to do a hard reset, that way all your programs are already there but there are clean roms like DCD's that are bare bones, that way you can customize it exactly how you want it.
Thanks for that reply. The things that you put on are the things that I want anyway. I do not want anything stripped, the was boring and not anywhere as useful with out all of this.
So putting apps on the Rom has the only advantage of hard resets? They do not boot faster or operate faster?
Again, thanks so much!
Angel, keep up the awesome job. Great package man. You gotta make an AngelUpdate icon so we can subscribe to all your updates.
wphend00 said:
Any plans on making a Sprint ROM?
Click to expand...
Click to collapse
maybe now that i know there is a demand for it
is this different that the one i downloaded saturday or sunday (before ppcgeeks crash)???
rmancl said:
is this different that the one i downloaded saturday or sunday (before ppcgeeks crash)???
Click to expand...
Click to collapse
yes, updated kitchen, forgot some oem's tho, so i will update it tonight again.
upping new rom with arcsoft 3 and fixed phone app
edit: also has remote desktop. and large start menu. this should be a lot closer to my original rom, but a little faster and some more ram give me about fifteen minutes then test away!
thanks
thanks falling up er... angel12
I will load it tonight
This is a beta for a new rom taxist and i are working on. please give suggestions and/or comments about the rom
SPL1.2 - http://www.megaupload.com/?d=H4S1NCOT
SPL3.5 - http://www.megaupload.com/?d=A5L0NEWX
UPDATE 10/06/08:
ok this is the last version, as of right now, with this build i am putting it on the back burner until i have more time to fix the stupid audio manager problem. the first link is spl 3.5 the rom and the second link is spl 1.2 third link is the addons (to much to list) but i will say it does have the voice commander 2.5 pulled from diamond and i did test it and it seemed to work. so here you go enjoy and final of my new rom will be out in about two weeks
spl 3.5
http://www.eurotelefon.eu/athena/taxist ver10 spl 3.5.zip
spl 1.2
http://www.eurotelefon.eu/athena/taxist ver10 spl 1.2.zip
addons
http://www.eurotelefon.eu/athena/new addons.zip
Let´s try
It´s a clean ROM, right?
A very clean and quick room not even have File Manager... Default is 192dpi, luckly I managed to find out the total commander!
siukeung said:
A very clean and quick room not even have File Manager... Default is 192dpi, luckly I managed to find out the total commander!
Click to expand...
Click to collapse
I like it WITHOUT the file manager. Good call. The standard file manager is a junk that never get used anyway. I use Resco File Explorere 2008, which allows you to scroll with fingers (like HTC TouchFlo with sound)..
I'm going to try this out for sure, and I think this could be IT.
eaglesteve said:
I like it WITHOUT the file manager. Good call. The standard file manager is a junk that never get used anyway. I use Resco File Explorere 2008, which allows you to scroll with fingers (like HTC TouchFlo with sound)..
I'm going to try this out for sure, and I think this could be IT.
Click to expand...
Click to collapse
Agree! I m so worry what I'm going to do if I can't find Total Commander ><! So far so good, Wifi working, Opera working, TCPMP working...with sound..
Too bad that Touchflo 3D not working...=,=
siukeung said:
Agree! I m so worry what I'm going to do if I can't find Total Commander ><! So far so good, Wifi working, Opera working, TCPMP working...with sound..
Too bad that Touchflo 3D not working...=,=
Click to expand...
Click to collapse
Personally I don't like Touchflo 3D. I only want the touchflo. Is that working?
Ather mirror...
Could some provide other mirror? I am not able to upload from megaupload
And I am willing to try SPL 1.2 version ASAP!
Many thanks Irus.
Great Job, Irus
Thanks Irus, is nice to see we are progressing, with your support of course. Just a question, I suppose is Ozvga included? Should be possible to have RealVga?
My question is because I think most of us use on 128 dpi.
http://asapload.com/117411 mirrors for the 3.5spl
Irus use asapload in future it makes life simpler for everyone..
has the problem with blank contacts been overcome?
is it possible to change the current boot logo (smart mobility test only not for sale) to the default htc?
When I press the button of my bluetooth does not do anything… does not abre voice to me to dialer nor nothing….
beginner said:
Thanks Irus, is nice to see we are progressing, with your support of course. Just a question, I suppose is Ozvga included? Should be possible to have RealVga?
My question is because I think most of us use on 128 dpi.
Click to expand...
Click to collapse
RealVga is installed, not OzVga.....128 is included and works fine
retroqwe said:
has the problem with blank contacts been overcome?
Click to expand...
Click to collapse
I use Pocket informant and the Blank Contact Issue is not in this rom using Pocket Informant in any dpi...But I did not try it with the Native Contact App.
amtech said:
is it possible to change the current boot logo (smart mobility test only not for sale) to the default htc?
Click to expand...
Click to collapse
I believe Irus's plan is to replace the Splash Screens. He created a thread asking for someone or many people to create splash screens for the Rom. So since no one has provided any yet and this is a beta rom, the splash's will be added later. You can also create and put in your own splash screens too. Below is his thread asking for Splash Screens.
http://forum.xda-developers.com/showthread.php?t=397552
Montecristo said:
When I press the button of my bluetooth does not do anything… does not abre voice to me to dialer nor nothing….
Click to expand...
Click to collapse
This is Lite or Vanilla Rom, therefore no voice command application is included in the Rom. Which is good, since you can install the one you prefer. There are several cabs available for either Cyberon or Microsoft Voice Command available. Choose your preference, search and install the one you want.
This rom is fast. GPS lock real quick
beginner said:
Thanks Irus, is nice to see we are progressing, with your support of course. Just a question, I suppose is Ozvga included? Should be possible to have RealVga?
My question is because I think most of us use on 128 dpi.
Click to expand...
Click to collapse
realvga is in the rom
fards said:
http://asapload.com/117411 mirrors for the 3.5spl
Irus use asapload in future it makes life simpler for everyone..
Click to expand...
Click to collapse
ok i will start using it. but if i for get just remind me
retroqwe said:
has the problem with blank contacts been overcome?
Click to expand...
Click to collapse
only in 192dpi but not in 128 or 96. i ask pawel what files he use for it to work in 96 but he has not responded yet. im sure he is busy so when he gets a chance he will let me know
retroqwe said:
has the problem with blank contacts been overcome?
Click to expand...
Click to collapse
The problem is still there in 96dpi and 128dpi.
However, it is fine in 192dpi.
oops, irus has already responded.
eagle 1 said:
This is Lite or Vanilla Rom, therefore no voice command application is included in the Rom. Which is good, since you can install the one you prefer. There are several cabs available for either Cyberon or Microsoft Voice Command available. Choose your preference, search and install the one you want.
Click to expand...
Click to collapse
Already this that you explain to me.
I have installed the Cyberon and works all good… but when pressing the button of my Jabra 8010 does not take the program, I have tried with the Vito Dialer and either… there is no something in the registry that does not take the button from my bluetooth.
install AP4 Cyberon Voice Commander from AP4 Addons
Delete shortcuts created in Start Up Folder
Install Cyberon Voice Commander form Irus 6.1 addons
then it will work fine!
hello everybody
I found a recent version VGA but I converted to QVGA, you certainly know this software, this version is unlike other tactile versions available to date
Admin edit: software removed after a complaint from the copyright owner, this software is not freeware or shareware and therefore considered warez, warez is not allowed on the forum.
Quentin Post:
I know, I know...I'm late to the party. Hopefully the quality of the release will make up for the tardiness. I'm still running a Kaiser (just couldn't convince myself the Diamond was actually better--and I'm still crossing my fingers that the Touch HD will get released with TMO 1700Mhz support).
Anyway, without further ado...this version of MusicID is based from the 1.3.16 source from 1800pocketpc.com which is of course released by AT&T. The changes are as follows:
Converted for QVGA (320x240) support. The conversion was done using image resources from the non-touch screen version so they look just fine. Furthermore all fonts have been converted as well. (I'd like to give credit to lepsyfou here, he did give everyone something to use at least even though the images looked poor and the fonts were large. Were it not for finding his original conversion that got me hooked on the app itself I probably never would have made my own conversion).
Removed UID information from query strings. For those that didn't check, the application for download on these forums (and other sites) actually makes all requests under the guise of someone's account (presumably whoever released the app). I won't post their account # here but suffice it to say that if they ever shut off the service everyone using that app would find it stops working. Hopefully that won't happen here.
Removed all AT&T specific features. This also means that all the buttons present after a successful identification have been removed. #1 they are completely useless for anyone not on the AT&T network; and #2 they were pretty much pointless (from my perspective) in the first place. As a side benefit see the next item.
Due to the removal of AT&T specific features I found it convenient to download a larger cover image photo for the album...maybe this will be enjoyed by others as well
Updated the help pages and removed redundant (or now unused) entries.
INSTALLATION INSTRUCTIONS
If you've never installed any version of MusicID before simply install the cab. If however you have installed a previous version pay close attention:
Remove any previously installed version of MusicID.
It is absolutely MANDATORY to remove the HKEY_LOCAL_MACHINE\Software\MusicID folder and its contents. If you're an advanced user and are using any of the conn* entries you can leave those but remove all others. If that last statement doesn't make any sense to you then simply remove the entire MusicID key (and all entries contained therein) prior to installation.
I highly recommend removing your \Application Data\MusicID folder and contents. This is due to the fact that the application now expects 150x* size images. The only issue with old images should be a slight off-center display though so it is up to you
Click to expand...
Click to collapse
enjoy
Update add VGA version
Update Shortcut fix QVGA
Update fix problème font QVGA
thanks and crédit are Quentin QVGA Fix
lepsyfou said:
hello everybody
I found a recent version VGA but I converted to QVGA, you certainly know this software, this version is unlike other tactile versions available to date
enjoy
Click to expand...
Click to collapse
Thanks for this. Been looking for an update since moving to the Diamond. Whats involved in migrating to QVGA? Is it an easy process? There are some other apps which would benefit from rework...Skyfire for one!
Cheers
Aidan
thanks for your work on this lepsyfou!!
wouldnt install. says installation unsuccessful because it is not digitally signed with...............
I have édit cab fr and eng: signature exe it"s good now installation functionnel
yes I will convert a fun software VGA>> QVGA so that everyone can benefit
Great soft thank bro
kwill said:
thanks for your work on this lepsyfou!!
wouldnt install. says installation unsuccessful because it is not digitally signed with...............
Click to expand...
Click to collapse
Look first post I have édit cab now it's signé
imfloflo: with pleasure my brother
thanks for fixing it so quick
ajout version VGA post 1
Is there anyway you could adjust the Text size? It still doesnt all completely fit on the screen.
Deff dont want to come odd as an ass. Just a thought to make the QVGA version even better.
Thank you
acardinale said:
Is there anyway you could adjust the Text size? It still doesnt all completely fit on the screen.
Deff dont want to come odd as an ass. Just a thought to make the QVGA version even better.
Click to expand...
Click to collapse
+1 on this... expecially on the manage id's tab... help me out tab needs some work too..
thanks on this, finally a finger friendly version of this app... great work!
hello, for some reason i cant access this program unless i go into file explorer and program files. Its not in my map to button list or in my start menu. I appreciate you porting the new version to qvga. Help in this matter is much appriceated.
molesaied88 said:
hello, for some reason i cant access this program unless i go into file explorer and program files. Its not in my map to button list or in my start menu. I appreciate you porting the new version to qvga. Help in this matter is much appriceated.
Click to expand...
Click to collapse
same here.... but i used Total Commander to copy the MusicID.exe file from the program folder to the Start Menu... and vola! it worked.... was able to place it in my program launcher using Manilla 2D....
i'm sure theres a much easier way.... but hey,.... it works..
hope this helps...
molesaied88 said:
hello, for some reason i cant access this program unless i go into file explorer and program files. Its not in my map to button list or in my start menu. I appreciate you porting the new version to qvga. Help in this matter is much appriceated.
Click to expand...
Click to collapse
no problèm shortcut AM MusicID start menu/ program
post1
very cool, I was using the old one with no touchscreen
Thank you.
the letters are cutoff a bit though also on the id screen
No biggie thanks again
Was reading about this last night on Pocketnow.com. tried to installed and got the unsuccessful message. Was in ATT store today looking at the new Samaung epix, just to see what it was about, would never give up my Tilt for it, but is nice and love the cursor, very responsive.
Now if you have a Tilt, not sure about other cells, or maybe if you have ATT device dial from you cell *43# and it should get it for you. Also might look in your start up might get put there.
I love this program. It actutally found a song from a Musical from 1951 while i have my Sirrus on Broadway. Unreal.
Hope this helps someone.
Beachboyde
Thanks for the good work!
Lepysfou, Great work, thanks for the qvga version
beachboyde said:
Now if you have a Tilt, not sure about other cells, or maybe if you have ATT device dial from you cell *43# and it should get it for you.
Click to expand...
Click to collapse
What do you get when you dial *43#? I have a tilt with att.
Thank you very much for this lepsyfou, worked a treat.
ps i love this tool.
showaco said:
Lepysfou, Great work, thanks for the qvga version
What do you get when you dial *43#? I have a tilt with att.
Click to expand...
Click to collapse
I am really not all that sure... It said success, and the attempted connecting to media net/internet. then a lot of nothing happened...
Massive thanks to jerpelea (wouldn't have gotten anywhere close without him).
I'm back! This new version is based on the fantastic Insomnia NIKI Kitchen, using WM6.5 Build 21500 and OEM Iolite/mishmash. As I made this version for my personal use, it is FULL of applications - if you don't like applications installed from the start, don't download it!
Warning: This ROM is for testing only and has been prepared by a complete cooking noob (me). I cannot guarantee any results for you or your phone and this may end up screwing things up COMPLETELY . Install at your own risk.
Having said that, it works very well on my NEON200 (Touch Dual 850), much better than any other ROM I have tried and even better than the old 6.1 version.
Make sure you have installed the Neon Hardspl (thanks Olipro) before you even remotely consider installing this.
Known Issues:
- DEVICE ID Reports as NIKI100 (I am still trying to figure out the XIP stuff)
- The camera hardware button does not work
- The camera autofocus doesn't work properly (messed up the some of the files I copied I think) so it takes a few seconds to shoot.
- Hardware keyboard doesn't work properly. It thinks that it is a 16key version.
Anyway, give it a go if you are game and let me know how it goes. It is a hundred times more finger friendly than the WM6.1 ROMs (which is the whole point of the touch phones).
I only do this in my *very* spare time, so I'm sorry in advance if I don't update often. I can say that I am very happy with the ROM as it is (never use the keyboard or camera), so it may be quite while before I update.
Download the new WM6.5 ROM here.
Old version (WM6.1 Build 21109) can be downloaded here if you want it for some reason.
Well done, looks nice. Everything works. Camera is good, text works, after calling t-mobile internet connects. Reception is fine, battery does not get hot. Although, instead of having a box with an x in the middle of it at far right corner, i have just an x. It takes a little more effort closing out of an application. Good job again.
ajb303 said:
Well done, looks nice. Everything works. Camera is good, text works, after calling t-mobile internet connects. Reception is fine, battery does not get hot. Although, instead of having a box with an x in the middle of it at far right corner, i have just an x. It takes a little more effort closing out of an application. Good job again.
Click to expand...
Click to collapse
Great stuff.
Are you having any other issues? Does the keyboard work 100%?
maximus007 said:
Great stuff.
Are you having any other issues? Does the keyboard work 100%?
Click to expand...
Click to collapse
I was just about to edit my post Keyboard does not work at any time. Also when recieving a voicemail, i tap and trys to connect. But says that phone call cannot be made at this time.
I've had no issues with voicemail...
Have you tried installing the latest Ezinput from the first post? Do you have 20-key device?
Perhapsthe Voicemailis something i need to set up with T-mobile.Yep, got the touch keyboard working with the install No keypad though.
Edit: Yes, camera button does not work.
I'm gonna load it up now and give it a shot.
I can't find the SIP task in task manager to kill it before installing the .cab.
Also can't get online because it is configured for Telestra (I imagine I can fix that easily). The "Setup Connection" app in settings closes immediately. That is how I used to setup my internet/phone provider stuffs.
Edits.
Ok...oddly enough after I updated my internet settings the 'task manager' and a few other apps showed up. That allowed me to kill the SIP and load the keyboard.
Overall this ROM is fast! Very happy with it so far. Can't wait till it is finished.
PS - I can't use my hardware keyboard either. Even with the SIP update. On screen works perfect.
I have NEON300 US version. If I decide to upgrade, can I reset back to factor default? Or is once upgrade, no turning back? I have Build 19209.1.0.2 version now on my phone.
mafirst said:
I have NEON300 US version. If I decide to upgrade, can I reset back to factor default? Or is once upgrade, no turning back? I have Build 19209.1.0.2 version now on my phone.
Click to expand...
Click to collapse
I haven't found a packaged default ROM. You might wanna see if he releases one once he gets this build worked out. I would love to get a copy of your default rom before you upgrade it. I think I lost mine 2 laptops ago. Once you load the HardSPL you can go back, however you need the default ROM to do so. There isn't a backup / restore utility as far as I know.
mafirst said:
I have NEON300 US version. If I decide to upgrade, can I reset back to factor default? Or is once upgrade, no turning back? I have Build 19209.1.0.2 version now on my phone.
Click to expand...
Click to collapse
wait! haha, before you do can you dump your stock rom? That would be very useful
I'm new to this site. How do I get my ROM backup?
mafirst said:
I'm new to this site. How do I get my ROM backup?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2254400&postcount=7
Let me know if you need help with this.
Voice Mail (T-Mobile)
I havn't been able to figure out how to change the voicemail number from the Telestra default, but if you dial "123" with a T-Mobile sim card, it will send you to your voicemail account. Just a little tip I thought might help.
big papa rich said:
I havn't been able to figure out how to change the voicemail number from the Telestra default, but if you dial "123" with a T-Mobile sim card, it will send you to your voicemail account. Just a little tip I thought might help.
Click to expand...
Click to collapse
Interesting, I didn't know that. I thought it was just an issue I had to call t-mobile about. Thanks
SMS
I have een having issues with SMS. When I try to send a text, I get an error message saying that my message can not be sent, that I need to subscribe to the service. I flashed back to Seths V2 rom and every thing worked fine. Any ideas?
BTW, don't know if any one needs it, but here is a cab that works great for reconfiguring internet stuff for T-Mobile or AT&T
I Just found this link. Says it is for the Neon 200 US, but my device still says 300. Any how, looks exactly like the Ship Rom as I remember it.
http://forum.xda-developers.com/showthread.php?t=395384
maximus007 said:
- DEVICE ID Reports as NIKI100 (I am still trying to figure out the XIP stuff)
Click to expand...
Click to collapse
You can change it by editing:
1) Modelname.txt in OEM/OperatorPkg
2) nbhgen.txt in Tools/Htools
I've Changed nbhgen.txt to NEON200 and a different version number, but when I flash it still says NIKI100 and the old version number. I have also changed the CID in OS.nb.payload, still no luck.
maximus007 said:
I've Changed nbhgen.txt to NEON200 and a different version number, but when I flash it still says NIKI100 and the old version number. I have also changed the CID in OS.nb.payload, still no luck.
Click to expand...
Click to collapse
Change the name in modelname.txt in oem/operatorpkg
Also change mixupdate_oemversion_100.provxml in same folder.
os.nb.payload content will get overwritten when the ROM is built.
Thanks for mixupdate_oemversion_100.provxml - that has the version info in it (also edited easily via registry). It was missing from my kitchen.
modelname.txt simply has "Touch Dual" (which is OK) in it. That file doesn't let me change NIKI100 to NEON200.
If you check my .nbh in a hex editor it displays "NEON200", yet upon flashing it still displays the device as NIKI100...