Related
FIXED! Read below for details.
So i've been messing with my mogul for nearly 4 hours now trying to convert it to dcd's rom..and i've flashed it twice now and after it reboots from being 100% loaded it just sticks on the HTC black screen..I've read and read and searched and searched and cannot find a definite answer. Can anyone help?!
basics?
did you load the radio rom?
did you load the unlocker?
you may need to restart the phone to the boot loader and resend the rom
(press and hold camera and power and push reset button)
I did TRY and reload the radio and unlocker..now im stuck at the black htc screen where it says no radio though. bleh. i can't even get it back up and running. what do i do?
edit:
I'm at the multi color screen..ive tried running the unlocker RUU and then running dcd's ruu and it doesn't work..and the radio RUU does not run at this screen...I can't get the phone back to a working status! Argghhhh. It wont let me run the relocker unless im in activesync...but i can't be recognized in activesync unless the phone is up and functional..so..? how do i relock it to put hte stock rom on to try and unlock again?
I am kinda stuck in the same spot, but mine is is the verizon logo screen, i tryed doing the power,camera and hte reset button but its till stuck, i tryed the relocker but i need to be in active sync
any help?
what i dont get is..i flashed it with the unlocker, then the rom then the radio...isn't RUU just overwriting each one or something? it doesn't make sense to me. and all i can do is run RUU..i did the rom, then the radio and it was stuck in the bootloader so i used the exitbl and got out of it but then it just went back to going to the HTC black screen saying no radio. ..i'm gonna try and flash the rom from a sd card next..we'll see what happens..
jkrolcz said:
I am kinda stuck in the same spot, but mine is is the verizon logo screen, i tryed doing the power,camera and hte reset button but its till stuck, i tryed the relocker but i need to be in active sync
any help?
Click to expand...
Click to collapse
This just happened to me after flashing the ROM but not the RADIO yet. Flashing the Radio fixed the problem.
I've flashed the radio..then its stuck in the BL and i use the program to get me outta it then it just keeps saying i have no radio! what the hell..this sucks. i'm in the worst possible situation to have to buy a new phone
There are three parts to the "operating system" of your phone.
1. Bootloader (also called locker, unlocker, re-locker, SPL)
2. Radio
3. ROM
The three components are saved in discrete portions of the device's memory. Flashing one does not overwrite the others. All three must be compatible for the phone to operate properly. If you stop the upgrade process recommended by the ROM compiler prior to completion, your phone may not operate properly. If you flash the "leaked" 3.16 ROM package, it contains all three components.
To use the 3.16 stock OEM ROM, or a custom ROM based on the stock OEM 3.16 ROM, you must have a level 3.xx radio and a level 2.xx bootloader. The current implementations of those are the 3.27 radio and either the stock bootloader distributed with the "leaked" 3.16 ROM package, or the Olipro 2.40 unlocker.
If you are running a level 2.xx stock OEM ROM, or a custom ROM based on a stock 2.xx OEM ROM, you must have a level 1.xx bootloader and a level 1.xx radio.
Custom ROMs are not always named using the OEM convention, so you must research the custom ROM to determine whether it is based on a level 2.xx or 3.xx stock OEM ROM.
I hope this helps all of you get your phones back up and running.
FIXXXED!
So heres the best description I can give of what was going wrong for me..Its my first time trying flash to a different rom..and well it didn't go so well. First, I used the titan unlocker, then installed the radio (not sure which one) and then some form of the newer dcd rom and i was getting stuck on the black HTC smart mobility splash screen where it said "no radio". I had to have messed around for over 5 hours today at college trying to figure it out by doing different arrangements what order i installed the radio and unlocker and rom in. I couldn't get it to connect with activesync so i couldn't use the titanunlocker.exe..all i was going off of was RUU's. Im not sure whether or not what OS I was using effected it..I was playing in Vista earlier today but had done the correct steps to install the drivers, and now this last time i did it on XP. This last time I ran the 3.27 radio RUU as found.. here ( http://forum.xda-developers.com/showthread.php?t=362563 )...Theeen I ran this form of the newer sprint ROM. (I'm pretty sure they say it comes with a included in this RUU, but i'm just stating exactly what I did) the .651 rom can be found.. HERE ( http://forum.ppcgeeks.com/showthread.php?t=16806 ) He had a error when packing or something so you have to manually rename it to .exe because it was missing a e..I did this within winrar before extracting..ran that and about 10 minutes later it booted up and i've got service. I'm not going to promise that this is 100% functional all i'm saying is im out of that horrid black HTC screen where I can now go on to try and get the correct rom i wanted. Hope this helps..may be a bit confusing and probably did things wrong but this was my first time doing it all.
Here is a breakdown of what i did and whats happening.
1.2 ollipro installed already
loaded new radio
loaded new rom
Now the windows mobile 6.1 screen would come up and ask to tap screen but would reboot at this screen continously. I assumed this was happening because 1.2 ollipro was installed and not 2.4.
I then decided to reinstall my old radio and old rom and now the phone gets to the htc bootscreen and reboots immediately over and over again without getting far at all. What do I do?
For TELUS P4000
BOOTLOAD MODE
1. Try getting to the BOOTLOAD MODE by pressing POWER, CAMERA and RESET all a the same time
2. You should see at screen with red green blue white
New RADIO and CE ROM
1. Hard-SPL-240-MFG.exe/titan_SPL_2.40-olipro.exe (follow the instructions)
2. Run titan_radio_3.35.04.exe (very simple GUI instructions)
3. The titan will reboot by it's self, put it back in BOOTLOAD MODE
4. Extract dcd_titan_kitchen_3.0.0.rar to a directory and run BuildNB.bat (it takes a couple of min)
5. Select the stuff you want and don't forget you carrier (TELUS....)
6. Press the PLAY button (when finished, which is hard to see, when play is green) close the BuildOS
7. In a DOS windows it will build the CE ROM (follow the instructions)
8. Titan will reboot
i cant get 2.4 on there because i can get activesync up and when i get it to run through the boot load it gets to 100% in a split sec but leaves 1.2 on and not 2.4 even though it didnt record any errors
I'm having the exact same problem. Got the new Rom and radio installed. I had to go back to 1.2 to do it. But now i cant get 2.4 to install. I run the program it seems to install but still says 1.2 and is stuck on bootloader screen. even though it said itupdated to 2.4 anyone got any ideas on how to get 2.4 on there?
Try entering the Bootloader mode of Oliprio 1.20 and connect the USB to your computer.
Although it wont start an Active Sync session it will still allow you to load thing on such as a ROM or flashing program.
Well once you are in Bootloader and have a USB connection then try installing Oliprio 2.40
This might work.
Hi, ive done that and gone through the 2.4 install. after the RUU runs the progress bar goes across in like 1 second. it reports it successful but it still says 1.2 and is now stuck in the 1.2 bootloader. as if 2.4 never installed. any suggestions?
Furman69 said:
Hi, ive done that and gone through the 2.4 install. after the RUU runs the progress bar goes across in like 1 second. it reports it successful but it still says 1.2 and is now stuck in the 1.2 bootloader. as if 2.4 never installed. any suggestions?
Click to expand...
Click to collapse
So you installed 2.40. Well once you installed 2.40 go into bootloader again and make sure it is 2.40 and then try flashing the Radio first and then the ROM.
This is how i did it:
Installed olipro 1.2
installed radio 3.35
installed dcd sprint 3.0
Now like everyone else it continually reboots cause of olipro 1.2. So i put it in bootloader and it says 1.20 spl. So now i go to install 2.4 Olipro. RUU runs and the progress bar goes to 100% in about 3 secs. AFter it goes to 100% the mogul screen flashes and it says olipro 1.2 as if 2.4 didnt install even though on my comp it says that ruu update was sucessful. So im confused. I have tried it on my computer(vista64) and my old one xp 32bit. When the batch file is running it says "no device connected. would you like to try again?" w/ a yes/no/cancel. If i hit yes it just loops. if i hitno it will ask me this about 4 times then RUU will load
Ok, for anyone stuck with an older version of olipro and the new radio:
While in the bootloader, load an earlier version of your carriers rom. This should let you boot again and will let you install the newest 2.4 olipro bootloader so you can flash the newer roms.
If you can't find an earlier version of your carriers rom you will need to find an older radio rom and an older custom rom and flash both seperately to get it to boot.
Furman69 said:
This is how i did it:
Installed olipro 1.2
installed radio 3.35
installed dcd sprint 3.0
Now like everyone else it continually reboots cause of olipro 1.2. So i put it in bootloader and it says 1.20 spl. So now i go to install 2.4 Olipro. RUU runs and the progress bar goes to 100% in about 3 secs. AFter it goes to 100% the mogul screen flashes and it says olipro 1.2 as if 2.4 didnt install even though on my comp it says that ruu update was sucessful. So im confused. I have tried it on my computer(vista64) and my old one xp 32bit. When the batch file is running it says "no device connected. would you like to try again?" w/ a yes/no/cancel. If i hit yes it just loops. if i hitno it will ask me this about 4 times then RUU will load
Click to expand...
Click to collapse
Instead of running the RUU right after installing 2.4 over 1.2 try canceling the RUU and then manually enter bootloader mode in 2.4 and then install the RADIO following the ROM.
I figured it out. feel kinda stupid. was trying to install 2.4 from the boot loader of 1.2 forgetting that it needs to install files over to the phone before it flashes. :/ thanks foryour help though
Furman69...
I'm having the same problem. Could you post a step by step?
Thanks
I think I bricked it.
Actually I think I made a bigger mistake. I'm a VZW user, and I flashed the sprint/htc update hoping I could just flash dcd on top of that = stupid. The radio settings were all f-ed up. So I believe I read in the dcd 3.0.0 thread to run the titan relocker and then flash the stock vzw rom. Big mistake. Once I relocked it, It wouldnt let me flash vzw 2.09 and now my phone's in bootloader saying
TITA100
SPL-1.06.0000
CPLD-9
I think I'm screwed because It doesnt have a rom on there, so I can even unlock it. Any help would be greatly appreciated.
Flashing the sprint update, then flashing dcd on top of it would have been completely fine if you didn't let the sprint customizations run...i've done it to 3 phones already.
I don't really get what you're saying though. Are you stuck in the bootloader? Can you boot into any kind of rom? What happens if you try and soft reset, does the phone do anything?
gcincotta said:
Flashing the sprint update, then flashing dcd on top of it would have been completely fine if you didn't let the sprint customizations run...i've done it to 3 phones already.
I don't really get what you're saying though. Are you stuck in the bootloader? Can you boot into any kind of rom? What happens if you try and soft reset, does the phone do anything?
Click to expand...
Click to collapse
Yeah I wasn't that smart though . But yeah I'm stuck in bootloader. And I don't even know how to go about putting a ROM on there because it's locked. I've already tried to redo the Sprint/HTC 3.35 update, but to no avail. It says wrong vendor. I don't know... It's brand new too, that what sucks about it.
I finally got it to work after going back and forth installing old roms and radios and then installing 2.4 and then the radio and rom as ususal.
To be honest with you guys i beat myself up because i should of done it like this from the get go 2.4,radio, rom, and thats it but i read about people having trouble and dcds post, and I just went through more trouble that way. Thanks for the help.
If you're stuck in the bootloader, download the exitbl program to forcefully exit the bootloader. This will reset the phone. Tell me what happens after that. Does it boot any sort of rom? Does it just hang at a blank screen? Let me know.
Jaquers said:
Actually I think I made a bigger mistake. I'm a VZW user, and I flashed the sprint/htc update hoping I could just flash dcd on top of that = stupid. The radio settings were all f-ed up. So I believe I read in the dcd 3.0.0 thread to run the titan relocker and then flash the stock vzw rom. Big mistake. Once I relocked it, It wouldnt let me flash vzw 2.09 and now my phone's in bootloader saying
TITA100
SPL-1.06.0000
CPLD-9
I think I'm screwed because It doesnt have a rom on there, so I can even unlock it. Any help would be greatly appreciated.
Click to expand...
Click to collapse
I had a similar experience. Here is what I did.
I had the following installed before I started.
2.40 bootloader
3.27 radio
DCD 2.3.2 rom
I wanted to upgrade to the latest and greatest so I did the following. (This was before anyone knew about the 2.40 radio flashing issues.)
Flashed to DCD 3.00.
Failed Trying to flash 3.35 radio.
Read some more and like you tried to relock my phone using titanrelocker
Locked bootloader
Failed trying to flash Verizon Radio (downloaded from ppcgeeks.com)
Failed trying to flash Verizon Rom 2.09 (downloaded from ppcgeeks.com)
So at this point I was stuck in the original 1.06 Verizon locked bootloader, but I had 3.27 radio and DCD 3.00 rom.
Execed titan_exitbl.exe (included in 2.40 bootloader) in vista which returned a nice error. (Error accessing USB blah blah blah)
Execed titan_exitbl.exe in XP with ActiveSync and phone rebooted
Phone booted into Windows Mobile 6.1 and rebooted itself.
So I plugged the mini USB cable back in hopeing it might prevent it from rebooting. Luckily it did.
Reunlocked Bootloader using 1.20 olipro
Flashed 3.35 Radio
Flashed 3.00 DCD Rom again. (Just in case)
Phone booted into Windows Mobile 6.1 with mini usb cable still plugged in.
Upgraded bootloader to 2.40.
Re-Insert my NAM settings into EPST and rebooted.
*228 to get latest PRL.
Has been rock solid since.
Hello everyone i Just got a xv6800 and am trying to flash to a newer rom...However i cant seem to boot into the bootloader it just hangs at Loading.... There is nothing installed its factory rom and settings
Thx in advance
How are you attempting to load into bootloader?
The way I saw on the forums....holding power and camera button and hittig the reset..i get the tri color screen then it goes to Loading... and just sits there dosnt do anything else
Do you have a microsd card in while trying this? If so, does it contain any .nbh files on it in the root directory? If so, do you have a TITAIMG.nbh file in the root directory?
The only way the bootloader would try loading something the way you're describing is if this is the case.
I agree with gcincotta.
If you are in fact trying to flash from the SD card though, most people have reported that it won't work using an SDHC card. It needs to be a standard (non high-capacity) card.
I did have a card in it..now i took the card out and it goes to tri color in the red i get tita100 and i the white i get serial...thats all it does now
Well i got it to go to usb but now the .exe file for the 2.40 unlocker wont run on x64 systems so i guess im out of luck huh
Did you already run the unlocker? If so, you should be ready to flash a custom ROM. It is normal to be stuck in the bootloader after an unlock. Just flash away.
If the unlock did not go successfully, you will have to try again, making sure to follow directions precisely (on a 32bit system preferably, less headaches). To unlock you must be booted up into Windows Mobile. You can try the exit bootloader program from the PPCGeeks Titan Upgrade forum, or try flashing a stock ROM to get back into WM.
Edit: You can tell if the unlock was successful by looking at the SPL in the bootloader (right under TITA100 MFG). It should now say SPL-2.40.Olipro. If it does not, try the steps above to get back into Windows Mobile.
I did have a card in it..now i took the card out and it goes to tri color in the red i get tita100 and i the white i get serial...thats all it does now
Click to expand...
Click to collapse
You need to be more specific. Everyone's titan says TITA100. What SPL is installed? Post the entire contents of your screen and then we can get somewhere.
I have a new 6800 from Verizon.
software 2.09.605.8
firmware radio 1.30.60
pri ver 1.35.002
pri check 11ab822d
SPL-1.04.000
Do I need to unlock it first ?
Which unlocker do I use ? is it TitanUnlocker.exe
Then the way I read it I need to first flash the Sprint ROM 3.35.651.2
Then what ever rom I want after that.
I was able to udate to 2.52 rom...the 3.04 wasnt working correctly and it would not up date using *228..and there was no sound...i was not using the radio 3.35 because i heard people saying that it was a bad one to use...is there much difference in performace between 2.52 and the 3.04?
So I need to install Sprints 3.35.651.2 rom and not let the sprint customazations run.
Then use the unlocker 2.4
Then use DCD or No2Chem custom rom.
craig540 said:
I have a new 6800 from Verizon.
software 2.09.605.8
firmware radio 1.30.60
pri ver 1.35.002
pri check 11ab822d
SPL-1.04.000
Do I need to unlock it first ?
Which unlocker do I use ? is it TitanUnlocker.exe
Then the way I read it I need to first flash the Sprint ROM 3.35.651.2
Then what ever rom I want after that.
Click to expand...
Click to collapse
You are starting from scratch with an unlocked phone. Before rushing forwards you have some reading to do:
http://wiki.xda-developers.com/index.php?pagename=HTC_Titan
All of your answers are there.
Yes I have read many threads and think that is why I am so confussed. I upgraded from a 6700 which I had flashed to WM6 many times before.
I will follow your linked procedure.
Two questions.
Is my phone being stock and never flashed before locked or unlocked, and do i need to run Olipro 2.40 by executing Hard-SPL-MFG.exe or start with the Sprint Radio (3.35.04)
Also the tutorial says Upon its completion, press the power, camera and reset buttons to force the phone into the bootloader/SPL mode.
What will I see to let me know it is finished loading.
Thanks for your reply.
craig540 said:
Yes I have read many threads and think that is why I am so confussed. I upgraded from a 6700 which I had flashed to WM6 many times before.
I will follow your linked procedure.
Two questions.
Is my phone being stock and never flashed before locked or unlocked, and do i need to run Olipro 2.40 by executing Hard-SPL-MFG.exe or start with the Sprint Radio (3.35.04)
Also the tutorial says Upon its completion, press the power, camera and reset buttons to force the phone into the bootloader/SPL mode.
What will I see to let me know it is finished loading.
Thanks for your reply.
Click to expand...
Click to collapse
1st- update to 2.4 olipro
2nd- update sprint 3.35 rom (stop at the "tap the screen" customization screen) this gives you the radio
3rd- from customization screen start the 3.0.4 rom and flash that rom
Your phone will restart after loading and will boot into wm6.1
4th- Read untill you understand before flashing roms
After 2.4 olipro do I hit reset to let it boot up again or start the sprint rom while its still in bootloader mode
craig540 said:
After 2.4 olipro do I hit reset to let it boot up again or start the sprint rom while its still in bootloader mode
Click to expand...
Click to collapse
Does not matter, if you do it in rom it will force into bootloader anyway.
Ok up and running dcd 3.04
date 2-22-08
radio 3.35.04
I did not let sprint cutomazation run.
Tried to make a call and get message saying verizon can not authenticate and to dial #8899
Should I do that now?
Had to call VZW to get new A-Key
No GPS detected in google maps is there anything I need to do to set it up ?
Try installing VisualGPSce -- it's a good little & free diagnostics program too see GPS satellite reception.
....after seeing that running on COM4 at 4800 baud, then you should see a list of visible satellites. Now, whether or not you get a sufficient lock within the first half hour depend's upon your luck in the draw for a GPS functioning Titan -- GPS hardware-wise, not all are equal.
Hi I'm looking for some help. I tried upgrading my XV6800 to the windows 6.5 rom but I think I might of messed up. I tried to update my radio first but ran in to issues.
I used Oilpro 1.20 to try and tried to update the radio but along the way messed up while trying an older rom and I'm currently at a Verizon screen with the message "NO RADIO" at the bottom. I'm assuming the radio rom was erased. I might have gotten confused with the roms and used a rom without the appopriate Radio. When I try to flash that rom back to a stock Verizon upgrade it just ends 11% in to the flashing process and the rom update utility returns a Error 290 screen.
Currently I can get the oilpro 1.20 bootloader to still load up but I'm not sure what to do at this point. I tried updating the ROM to DCD's older 3.20 roms, which did complete but I still have that screen coming up. Can anyone give me some suggestions on what I should do next? Any help would be greatly appreciated.
Try using NueSPL 2.47 it's more current
Doesn't have have to be run on the phone itself once inside Windows? The only screen I can get up is the Verizon (splash) screen where it normally lists the rom and radio, or the oilpro boot loader screen. I actually can't get back in to windows to run the nueSPL 2.40.exe file.
Is there a way for me to flash the radio back from a bootloader screen and USB or SD card? The thing is I actually tried to take the 3.42.40 radio and use the Flash Rom Utility to see if it would flash the radio rom back on but even though the process completes successfully, I still get the no radio error so I guess it doesn't work. Thanks for the help, I think I may have been a few of the idiots out there who screwed things up and didn't make sure the radio was up before attempting any rom upgrade.
You should've changed the bootloader first. Your radios that you are trying are not compatible with your bootloader.
Flash an old stock rom via SD, then update your bootloader to 2.47 once you can get back into windows, then update your radio, and then your rom.
Yeah that was one of the first things I've tried a USB update back to the stock Verizon 6.1 ROM, but for some reason it prematurely ends at 11% with the PDA Phone Update Utility throwing a ERROR 290 message. This is the first time this has happened as I've flashed with this same rom tons of times. I've been looking online for the past hour on how to flash the ROM from a SD card if I can't get in to Windows. But all I could find was the USB update utility and it ends at 11% Am I doing it wrong? any ideas would be greatly appreciated.
If you can still get in the bootloader then you should be fine....I would put it manually in bootloader holding power and camera simultaneously and poke the hole to get it into bootloader.
Once you do that plug in the data cable and run Olipro 2.40 or Nue 2.47. It should be able to take after that.
Basics steps to flashing a phone:
correct unlocker-->stock ROM-->custom ROM
Most custom ROMs will not include Radios that why you would run the stock ROM first to install the radio and then run the custom ROM. Alot simpler then trying to update the Radio by itself.
AWESOME! I got it back up, thanks guys. For reference purposes I'm going to restate the problem and solution incase other noobs run in to the same issue.
PROBLEM:
I installed oilpro 1.2 during the process of installing a new radio then a rom. Along the way the rom install failed. I tried to reinstall a stock Verizon rom RUU 3.57 & 3.37 radio but it failed at 11%. I was then stuck at the splash screen with a message that said NO RADIO. I could still get in to the boot loader with the power and camera button. But the stock Verizon rom did not install anymore.
SOLUTION:
I used titan_exitbl.exe to exit the bootloader and I went back to an earlier rom found here, rom 2.09 & radio 1.30. That one actually installed. It seems to have worked. I'm back in windows now but I need to uninstall oil pro 1.2 and get nuSPL 2.47 on there before I move further (it looks like while it's still on the stock RUU won't work for me).
Do you guys know how I would go about uninstalling Oilpro 1.2? Will Titan_relocker do it for me? I'm not sure if installing nueSPL over oilpro will do it.
Use this ROm from Verizon to get the Stock 6.1 back up and running. It's the MR2 rom
http://www.pcdphones.com/phone_downloads.aspx?bid=89&cid=1&mid=287&carrier=Verizon Wireless
Beyond888 said:
AWESOME! I got it back up, thanks guys. For reference purposes I'm going to restate the problem and solution incase other noobs run in to the same issue.
PROBLEM:
I installed oilpro 1.2 during the process of installing a new radio then a rom. Along the way the rom install failed. I tried to reinstall a stock Verizon rom RUU 3.57 & 3.37 radio but it failed at 11%. I was then stuck at the splash screen with a message that said NO RADIO. I could still get in to the boot loader with the power and camera button. But the stock Verizon rom did not install anymore.
SOLUTION:
I used titan_exitbl.exe to exit the bootloader and I went back to an earlier rom found here, rom 2.09 & radio 1.30. That one actually installed. It seems to have worked. I'm back in windows now but I need to uninstall oil pro 1.2 and get nuSPL 2.47 on there before I move further (it looks like while it's still on the stock RUU won't work for me).
Do you guys know how I would go about uninstalling Oilpro 1.2? Will Titan_relocker do it for me? I'm not sure if installing nueSPL over oilpro will do it.
Use this ROm from Verizon to get the Stock 6.1 back up and running. It's the MR2 rom
http://www.pcdphones.com/phone_downloads.aspx?bid=89&cid=1&mid=287&carrier=Verizon Wireless
Click to expand...
Click to collapse
Glad to hear you got your phone back up
As far as I know you should be able to just install 2.47 and it will overwrite your old bootloader without problems. I could be mistaken but there isn't really a way to "uninstall" a bootloader, just overwrite it with a different one.
unL33T is correct...just run Nue 2.47 and let it overwrite the old one. 8p
Yeah that's what I thought too, but when I tried to over right it with 2.47 the 1.20 showed up again so I used the titan_relocker tool. Maybe I did something wrong. I'll go recheck, thanks for the replies guys.
Anyone encountered this error before? It gets to 8% and then phone reboots and I get this on my PC screen. It says Error [328] (see attached image)
I am using Radio 3.37.75 (verizon), and my bootloader shows 2.40 Olipro
Any ideas?
Try this RUU it is version 3.16.4.3.
Yes, thats the version that I am using. I think... when I run it, it says 3.16.4.3 in the window title bar. (see screen shot)
EDIT: I tried it anyways, and I got the same thing. Do I have the right bootloader? Would a different one help?
what are you trying to flash
trying to flash my verizon xv6800 (which has an old dcd rom on it, radio 3.27 i think) to the new radio: 3.37.75.
Then i will flash with a newer dcd or ryan mogul rom.
wildcard said:
trying to flash my verizon xv6800 (which has an old dcd rom on it, radio 3.27 i think) to the new radio: 3.37.75.
Then i will flash with a newer dcd or ryan mogul rom.
Click to expand...
Click to collapse
Just follow my post here and only use the files and Radios that I provide. Make sure you read a few times so you understand, and dont skip anything. Most important based on what I have read in this thread. Use only the radios I provide on my share site and take your time paying close attention.
http://forum.xda-developers.com/showpost.php?p=3687027&postcount=144
Thanks, I'll do it exactly like that. I will keep you posted. I have to get a new micro SD card, I only have an SDHC 8 GB
The radio can be updated via usb. I do it all the time. But it does hard reset the phone in the process.
I would try a newer radio like 3.42.40. http://wiki.xda-developers.com/index.php?pagename=TitanRadioROMs
I got my radio from there and have no problems updating the radio with ruu.
I followed the directions exactly like in Ryan's post mentioned above, (used USB instead of SD card), and it works!
Fully functional. I used Radio 3.42.02 (somewhere I saw that it was recommended over the others, went with it to be safe). Then Flashed Ryan Mogul Rom 2.2 Heavy.
Thanks everyone!
drewcam888 said:
I would try a newer radio like 3.42.40. http://wiki.xda-developers.com/index.php?pagename=TitanRadioROMs
I got my radio from there and have no problems updating the radio with ruu.
Click to expand...
Click to collapse
i have spl olipro-2.40, rom dcd 3.2.6 and want to upgrade radio to 3.42.50 using usb. should i downgrade spl to 1.20 before upgrade the radio? or i stick with current config and update the radio using RUU?
Still cant load radio
Obtained 6800 originally Alltel, not sure which radio, Had Olipro 2.40 installed, would hang on Alltel splash screen.
Could not get any RUU loads to complete (from USB or SD card), usually would fail around 50%.
Eventually was able to get RyanMogul 3.1 Cricket (lite) to load, but shows no radio and eventually screen goes blank. Never goes into active Sync mode.
We force boot loader mode and try and load several radios including Titan_Radio_ROM_3.42.50.Alltel.rar, Titan_Radio_ROM_3.35.04,
but keep Getting error 328 from RUU when I try to load a radio..
tried RyanMoguls "Here is a fix for GPS for all you VX6800 users that gps will not function!!", but cant run relocker because no active sync connection.
Stock Verizon ROM RUU also gets error 328.
Any ideas.