Does anyone know where to find proper drivers for Vista 32 bit to ensure a proper connection between the Niki and WMDC ?
Having flashed mine with Tom's ROM, it's now a mess, the device connects only once every 10 to 15 tries (with the same cable that was working perfectly until then...) !
Check your Cabel again?
No Vista Driver! You dont need any Drivers!
It's Toms Rom that is the Problem, it is possible that it is an issue with 6.1, but the issues with WMDC are worth putting up with because Toms Rom is the best in every other way.
mcoquet said:
Does anyone know where to find proper drivers for Vista 32 bit to ensure a proper connection between the Niki and WMDC ?
Having flashed mine with Tom's ROM, it's now a mess, the device connects only once every 10 to 15 tries (with the same cable that was working perfectly until then...) !
Click to expand...
Click to collapse
make sure you disabling the USB to PC connections setting
Start > Setting > System > USB to PC > Uncheck the advance network functioanality
hope this help. and agree with seal, so far there is no other dual rom better than tom's rom.
You can always restart the windows mobile divice services in the cervice pannel
Related
anyone get the error message of unknown device when plugging in their wm 6 phone to a laptop, happens to me on vista homepremium and xp, both up to date. this happens about %50 of the time
I bet your USB port on the laptop is not supplying enough current (borderline, hence why it works sometimes). Try one of the following things, first try the connection while the laptop is on AC power (not internal battery). Second, do you have a double USB port adapter? This is a cable that plugs into your external USB device on one end, and has a Y-connector that plugs into 2 USB ports on your laptop, thus increasing the current capability. If either one of these suggestions solves the problem then it means the laptop is not able to supply enough current on one USB port, a common problem.
I had the same problem and found it to be a firewall issue
Ofcourse it could be a firewall issue or any issues with loading of drivers and services. A soft-reset on the device and a PC Restart will solve most of the case!
Regards,
Carty..
How would a PC Restart make your firewall accessible, I located the SmcGui.exe (symantec) created a shortcute, and use that to disable to firewall whenever I want to connect
paulnoise said:
anyone get the error message of unknown device when plugging in their wm 6 phone to a laptop, happens to me on vista homepremium and xp, both up to date. this happens about %50 of the time
Click to expand...
Click to collapse
hi guys thanks for the advice, however, i have since updated to vista ultimate and now get the following issues. xp seems to have sorted itsself out, however vista has problems installing the drivers for my phone. it says on the phone check usb cable and on the laptiop i get the symbol in the sys tray for unrecognised device. the phone will sync fine, just not allow internet sharing.(i am using a 2.0 usb port and my mobile device centre is up to date, i downloaded all the vista updates today)
my firewall has been turned off, but i believe its a driver issue as thats whats showing on the screen device not recognised.
any ideas?
For Internet Sharing in Vista, you need to install WMDC.
http://www.microsoft.com/windowsmobile/devicecenter.mspx
i have it installed, i tried changing from official rom to black satin and a few others and it still does the same. the mobile device centre will sync then i turn on the internet sharing and it installs the drivers for "unknown device". had a word with the t-mobile connectivity team who took a look at the laptop and phone, tried it on other laptops with the same result. vista doesn't like the internet sharing bit. tried the usual stuff like taking off the advanced network functionality etc.
oke here is what u gotta do :
for windows vista:
-reboot computer without wm6 device connected
-install mobile device center 6.1 (the drivers ^^)
-reboot
-wipe all activesync connections on wm6 device and vista
-disconnect device and see if advanced networking is enabled (USB to PC .. in networksettings wm6)
-set connectionssettings in mobile device center from automatic to Internet
-goto networksettings on wm6 device and choose connections
-tap advanced and select networks : both set to My ISP
-connect wm6 device and wait till it finished .. take some minute or so
installing drivers and things
-when its done unplug device and reboot computer (yes again, and i am not
going to explain why this is so important as you should know by now)
-wait for the computer to boot untill it finished (vista this take 2 minute at least)
-connect wm6 device and setup proper sync partnership
-goto connectionsettings in mobile device center and check all boxes and set it to internet if it is not allready set.
-wait for the device to do its stuff
-it will strangely reconnect after a while and internet works again
notes:
kaspersky 7 : -turn of the kaspersky protocol on the networkadapter of wm6
-allow acces to svhost when it asks for it.
norton 360: -no problem found .. maybe you need add LSP to trusted
networks
internet+wmdc 6.1
double post ...
moderator remove this please
hey dajojo yer guide is great , i tried it and unfortunately, it connected for about 30 seconds and went straight back to usb device not recognised.
when it was connecting it should show up as "generic rndis internet sharing windows mobile device" or something similar.
any further assistance would be great.
m running vista home premium 32 bit (went back to it from ultimate)
Finally Solved!
Hi there!
Seems to be the same problem on HTC Dual!
try this
go to start>settings>system>power>advanced
if the checkbox "When device is turned on, do not charge battery when connected to PC" is checked uncheck it and tap ok! Then go back again and check the checkbox again and tap ok again. and the ActiveSync software will sync all data!
does any one have RNDIS drivers or settings for win xp and imate jamin ,to connect via active sync without using usb_switch
kamalneet said:
does any one have RNDIS drivers or settings for win xp and imate jamin ,to connect via active sync without using usb_switch
Click to expand...
Click to collapse
try to get the acticsync 4.5, if you already have plese try to reinstall.
It should solve the problem.
I don't have problem for the RNDIS driver request on my XP but it only appear on the Vista.
Good Luck.
Thank you.
uk19xx said:
try to get the acticsync 4.5, if you already have plese try to reinstall.
It should solve the problem.
I don't have problem for the RNDIS driver request on my XP but it only appear on the Vista.
Good Luck.
Thank you.
Click to expand...
Click to collapse
i don't have problem in vista but have active sync 4.5 problem on xp actually when i connect it just asks for no drivers but green active sync animation takes place for a while and then instead of showing add new device window nothing happens untill i use usb switch and change to serial
Hi.
first, sorry about my english, im from mexico =)
I have a Htc Titan
Rom: NueRom 6152-3pre3
Radio: 3.42.30
Carrier: Iusacell
Im on a Hp dv2000 Windows Vista 32 bits.
The problem that i have is that i cant conect my titan to USB.
When i connect it to the computer charges the battery phone but my computer didnt recognize it.
I tried on diferent computers, win xp and vista and nothing happends.
So i read all the threads about the aGps and QPST. and i coudnt connect my phone to QPST for making the agps trick.
Also i tried to connect to QPST by bluetooth and also nothing happends.
Also i tried all the HTC modem drives and allways i had the same error (10)
can someone help me please
Thx!
sometimes i just unplug and try again over and over, sometimes it takes up to five times, sometimes i even reboot my pc.... try that y arriba mexico ca.....nijos
i tried that and nothing happends =(
when i go to bootloader mode my computer recognize it as an unknow usb divice.
on settings>connection> USB TO PC i tried endable and disable the advance network functionality and nothing happend.
also i tried to relock the phone and put my custom rom (alltel) and also nothing happend..
do i need to change something on the phone?
Please help me ! =)!
Thx.
Did you get dmrouter to start? Have you installed the drivers? I just assume you have followed the first steps of the wiki.
Do you have data and phone, and all functions working? Does IUSAcell even support or have aGPS server? Are you trying to use another carriers aGPS settings?
kdj67f said:
Did you get dmrouter to start? Have you installed the drivers? I just assume you have followed the first steps of the wiki.
Do you have data and phone, and all functions working? Does IUSAcell even support or have aGPS server? Are you trying to use another carriers aGPS settings?
Click to expand...
Click to collapse
Yes, i tried on dmrouter and nothing happend, i have the drivers.
Yes, i have data adn phone, evreything works fine.
Iusacell support aGPS im 100% sure of that.
Do you have any recomendations on how can my computer will recognize my phone?
thx
If dmrouter started successfully, you have the wmodem drivers installed and qpst did not recognize your device and you followed all the directions in the GPS fix thread of your choice, There is nothing I can do for you. Sorry.
Do you have agps server info for iusacell? where is it posted?
kdj67f said:
If dmrouter started successfully, you have the wmodem drivers installed and qpst did not recognize your device and you followed all the directions in the GPS fix thread of your choice, There is nothing I can do for you. Sorry.
Do you have agps server info for iusacell? where is it posted?
Click to expand...
Click to collapse
I found it here
http://www.darkclockers.com/foros/showthread.php?t=7493
sorry but its in spanish, hope it works for you.
anyone can help me with my problem?? thx!!
One trick is to use a different USB port on the computer you are using. Also make sure that the computer has not added it in the Device Manager as an Unknown Device and placed a Yellow Exclamation point besides it. If so delete the item and then reboot.
Also, Im not so sure you really have the drivers installed.
You need to install microsoft activesync in order for your computer to have the right modem drivers.
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync45.mspx
the computer dont recognize my phone, only on bootloader mode.=(
Have you tried to turn off Enable advanced network functionality? When I had issues with my computer seeing the phone, I unchecked this box and active sync would see the phone as well as I now could teather via USB.
Here is where to find Enable advanced network functionality:
Start/Settings/Connections/USB to PC/
Good luck
Re: QPST connection issue
shimele said:
Hi.
first, sorry about my english, im from mexico =)
I have a Htc Titan
Rom: NueRom 6152-3pre3
Radio: 3.42.30
Carrier: Iusacell
Im on a Hp dv2000 Windows Vista 32 bits.
The problem that i have is that i cant conect my titan to USB.
When i connect it to the computer charges the battery phone but my computer didnt recognize it.
I tried on diferent computers, win xp and vista and nothing happends.
So i read all the threads about the aGps and QPST. and i coudnt connect my phone to QPST for making the agps trick.
Also i tried to connect to QPST by bluetooth and also nothing happends.
Also i tried all the HTC modem drives and allways i had the same error (10)
can someone help me please
Thx!
Click to expand...
Click to collapse
Hi Shimele, give this a try. Go to device manager if using XP, should be same for Vista. Look for ports, expand it and you should see something new for your phone. Open up properties for it and then click on Advanced. You should see Port Settings and Advanced at the bottom. By default it may be a high port like com port 9, set it to com port 1 or com port 2. Then run QPST configuration and make sure it's listed in there. You may need to reseat your USB cable after making this change. Hope this helps you
thx all for you answares...
I think phone usb its broke, thats the only logical explanation.
I made my GPS lock in lees than 10 sec. so the usb its not a problem anymore.
I got GPS so fast because i change the radio to: 3.37.75
Thx!
Hola shimele.
I'm also in Mexico (DF) and using the exact config you're using (both laptop and Mogul in Iusacell). I've tried several DCD, Nue and generic roms and they sync with no problems for me.
So, let's start at the begining: you're using Vista, so make sure you've installed the Windows Mobile Device Center patch for Widows mobile. This replaces ActiveSync for Vista computers and can be downloaded here: http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center.mspx
Follow the instructions and you should be fine.
If you want us to follow this offline, I'm available, just PM me or send me an e-mail, OK?
Saludos.
I'm using Vista to flash 'PDAVIET_ROM_WM61_OS20765_ATOM_Sonblack' but I was disconnected from Windows Mobile Device Center. Now my Atom cannot reset, cannot sync and STUCK with message 'Update Utility'!
Please help me to get back my Atom!
Thank you so much!
Use rec + camera + reset button.
In DM mode choose Exit DM.
weird! it works on winXP but not in Vista!
anyone know why?
Lots of things could be causing your problem. Here are some things for you to try:
1. MOST IMPORTANT: Make sure that you plug your device directly into the computer. Do not plug the device into a USB hub or other device. If you are using a laptop, do not plug the device into USB ports in your docking station. More technically, make sure that the port you are using is a Root USB device, not a Generic USB one. This make quite a difference in Vista, because locking your computer or having a UAC prompt while you are connected to a generic USB device seems to interrupt the connection.
2. Make sure that you have "Advanced Network Funcationality" enabled.
2. Make sure that you have the latest version of ActiveSync or Windows Mobile Device Center (Vista). If you are using Vista, the current version is 6.1. This version has some updated drivers that seems to help immensely with stability.
3. If you are using Vista, make sure you have all the latest OS updates installed. There was a Windows Update sometime back in November of 2007 that fixed some serious bugs in the USB drivers in Vista.
4. If you have Windows Firewall Client for ISA installed, do a search on the Microsoft website for possible problems with interactions between ActiveSync/WMDC and the firewall client.
Hope this helps.
Problem with Rom flashing
kate78 said:
I'm using Vista to flash 'PDAVIET_ROM_WM61_OS20765_ATOM_Sonblack' but I was disconnected from Windows Mobile Device Center. Now my Atom cannot reset, cannot sync and STUCK with message 'Update Utility'!
Please help me to get back my Atom!
Thank you so much!
Click to expand...
Click to collapse
You must be careful with connection whenever you flash your rom. Never disconnect when the process is still going on.
This is what I think you should do to try to rescue your Atom.
1. Make sure that your Atom can really communicate with your PC. As long as they show that they're connected is ok.
2. Flash that rom again. This time please make sure that there will be no disruption on the connection. Don't disconnect while the process is going on or you'll have a high chance of transforming your Atom into a toy.
You have to follow the instruction and wait until the end of the process. I've flashed many roms without any single problem.
3. You better flash using direct connection. Don't flash from your SD but directly from your PC.
Hope this helps!
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
freebo21 said:
Hi, first of all I would like to apologize for my English.
After installing this ROM dynamics7 2.0 ZUNE longer detect my phone. I tried to reset the phone but it did not work. The USB cable is definitely good because he installed the ROM.
I tried different roms but it did not work. Trying on another computer or do not give. The phone is not detected by the Zune. mistake can be seen in the computer drivers. the system can not retrieve them. I will add that the installation of Roma do not have any problems.
What could it be?
Click to expand...
Click to collapse
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
berrywr said:
Restart the device in bootloader mode and look for the word "serial" to change to "USB". If so, you have a connection to your PC
Click to expand...
Click to collapse
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
freebo21 said:
It's not that but thanks. Loading a bootloader mode by rom without any problem.
Zune does not detect my phone when connected nothing happens. I'm only in device manager two errors:
1.The Windows has stopped this device because of the reported problems. (Code 43)
2.driver this device are not installed. (Code 28)
To find a driver for this device, click Update Driver.
Please help because I do not know what to do with this phone.
I think that when I go into a different mode vol-+ power zune starts but displays an error (the device can not be restored to a previous version)
Of course, before installing custom roms I did not have this problem.
Click to expand...
Click to collapse
What is your Zune version number and OS version?
berrywr said:
What is your Zune version number and OS version?
Click to expand...
Click to collapse
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
freebo21 said:
Zune is the latest version from the download of microsoft (4.8.2345.0). zune is installed on Windows 8 I would add that before the original ROM (before flashing custo rom) everything worked. I tried on another computer without success. I have uploaded a clean Tango, without effect.
Click to expand...
Click to collapse
What about putting your phone in bootloader mode and will it read USB below when connected to pc?
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
nikola92 said:
bery you dont get it man have problem syncing the titan with zune, go to your ROM thread and read all, thats the only solution or use google
Click to expand...
Click to collapse
I've inserted a correction here...I restarted by device in bootloader mode and plugged it into my laptop; Zune did not start; however, the letters "USB" do appear in the center-bottom. Rest of post remains the same...You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
berrywr said:
Your phone uses both Zune and WMDC when you are in Bootloader mode. You may view your device from your PC's File/Windows Explorer by changing 3 zune driver entries via your PC registry editor and when the device is on wi-fi, you may also view other folders that are on your windows phone. My PC is running Windows 8 Professional. It is important to check if your computer and its drivers are compatible with what you're attempting to do. I don't use Zune for my multi-media copying to and from my device. I use the professional version of Windows for it's easier compatibility such was WMDC 64-bit. I don't pretend to know whether I get, don't get, have or do not have your problem; what I do know is leave no stone unturned; double check everything on your PC for compatibility...are all your drivers updated for example. I have an older 32-bit Dell Inspiron E-1505 I upgraded to 4 GB RAM and upgraded it from XP to Windows 7 Enterprise Edition (not Home Premium) and from time to time whether it was my device or my Win 8 PC; sometimes they wouldn't play nice, thus I have the same setup on my Win 7 machine and if that didn't work; pull out my Hiren's Boot Mini XP Thumb drive and enjoy some old school computing; maybe I don't get it, where I'm from, we call it Plan B...improvise!
Click to expand...
Click to collapse
I tried on windows 7 pro 64 bit and win 7 home premium. It did not work. In bootloader mode to install the drivers successfully but the Zune does not detect the phone in this mode. Including the phone in normal mode, the driver installation error pops up device not recognized. Zune without the driver does not detect the phone. Previously the phone was detected under the name HTC Titan X310 is now htc eternity.
please help
I have exactly the same problem. Please help: (
vakos8 said:
I have exactly the same problem. Please help: (
Click to expand...
Click to collapse
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
berrywr said:
I'm running Windows 8 Pro on my desktop; both WMDC and Zune will run when I plug my Titan into the laptop; by that I mean I'm at my Start Menu and Tiles; not Bootloader or USB Host Mode. I know that because the HTC Titan appears twice in my File Explorer on my laptop. Though my device is HSPL, I did restart my device in bootloader mode and plugged it into my laptop; it did not start Zune but it did read USB center-bottom. I may in due time get me another Titan I to play with but there's no way I'm risking my device to any further experimentation now that she's unlocked all the way and running 7.8 and runs as smooth as a baby's butt.
Click to expand...
Click to collapse
Does anyone have any ideas what it could be? Please help solve the problem.
freebo21 said:
Does anyone have any ideas what it could be? Please help solve the problem.
Click to expand...
Click to collapse
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
HTC TITAN
xconomicron said:
This may or may not help...I don't have my W8 laptop with me now...but there is an option in Windows that lets Windows search for the driver through WIndows Update...and it will automatically install it from the internet?
Is windows update checked to automatically search and download / install new updates?
Click to expand...
Click to collapse
help someone? Zune still does not see the phone. The system can not install the driver why are these problems (it does not recognize the phone)
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
HTC TITAN
AndrewSh said:
Did not you guys try to play with USB to Video function? If yes - switch it off and reboot.
Click to expand...
Click to collapse
It's not possible. Windows does not recognize the phone. Install different ROM and nothing. Even on a clean TANGO same
+1
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
problem
help someone?
domipasc said:
Hy every Body,
I have the same problem , and i know one other person with the same problem !!
This default appears with the Rom Deepshinnig V2 (The DeepShining v2 Works Well). After I have flash with 3 different roms, the stock rom tango and the last Eburon 7.8 Rom (in use now). But i still can't connect My titan on diferents Computers where Mozart connect normally.
I can't Switch Usb Video Out
Thanks alls for ideas or directions to follow !!
Domipasc
Click to expand...
Click to collapse
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
xconomicron said:
you have a very old rom. dotcompt came out with V3 awhile back. other than that I havent used usb video out.
Click to expand...
Click to collapse
I've never used the Dynamic ROMs but I can't stand using Zune so I tweaked my registry to make my Titan visible via Windows/File Explorer, I'm curious as to whether any of you with this problem can connect your devices to the developer tools with Windows Phone 7.x for side loading apps.