Yesterday a upgrade my TYTN with new rom (bootloader 1.09) (first it was Original tytn rom bootloader 1.04 ) .During upgrade it stopped and tell me about recovery , I canceled it and try to reupgrade . I was not successful and after that there is no way to do anything . Not do downgrade nor upgrade .
Who can help me , please . now I have a 800$ tytn which has only a screen which only show bootloader screen .....!!!!
PLEASE HELP ME
jash431 said:
Yesterday a upgrade my TYTN with new rom (bootloader 1.09) (first it was Original tytn rom bootloader 1.04 ) .During upgrade it stopped and tell me about recovery , I canceled it and try to reupgrade . I was not successful and after that there is no way to do anything . Not do downgrade nor upgrade .
Who can help me , please . now I have a 800$ tytn which has only a screen which only show bootloader screen .....!!!!
PLEASE HELP ME
Click to expand...
Click to collapse
Did you try flashing HTC 1.18.255.3 07/22/06 Rom after failure? Any error message?
ftp://xda:[email protected]_1.18.255.108_1.03.03.10_qtek_wwe_ship.zip
For everyone who try to upgrade roms, please make sure you reboot your PC first, exit all programs(eg.MSN.baba) and don't launch any program during the update. Also, make sure your battery is fully charged.
Thanks for your Answer
I tried "ME_DT_WWE_1182553_106_10303_Ship" but I was not successful (it has also bootloader 1.04) .It said no vendor id !! . is there any deference between your suggested rom .
now I am downloading yout suggested rom . I hope I'll succeed . but if not , how can I do .
Thanks for your following suggestion .PLEASE ANYONE HELP MEeeeeeeeeeeeeeeeeeeeeeeeee!!!!!!!
looks like you haven't read the wiki yet. check this page regarding upgrade problems.
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
PLease Read Carefully
I know all last ways to solve my problem but it's new one .
you see my bootloader is 1.09 and it newer downgrade with previous tools even with DownGrade_SPL.rar . because it never let us to downgrade bootloader version
PLEASE HELP MEeeeeeeeeeeeeeeee
jash431 said:
I know all last ways to solve my problem but it's new one .
you see my bootloader is 1.09 and it newer downgrade with previous tools even with DownGrade_SPL.rar . because it never let us to downgrade bootloader version
PLEASE HELP MEeeeeeeeeeeeeeeee
Click to expand...
Click to collapse
Uhuh... http://forum.xda-developers.com/showthread.php?t=284557
Seems to be a common problem....
Also looks like only way out is to flash a matching CID rom, however I cant try this as there is no released UK M3100 rom.
My issue was slightly different, but the end result seems to be the same. Confirm that you've got a ROM with the same CID. However querying the CID (info 2 in bootloader check wiki for more detail) returns bizzare "corrupt"? looking CID in which case even the "correct" rom for the device wont work....
Whats your CID..... Is there a matching CID rom available, and what happens when you try it. You'll probably need to flash from the bootloader.
If that fails, its return to base for a reflash....(that'll be chargeable....)
POF or some of the other bright sparks may be able to revive, but I've tried all tricks so far.....
Dear Community, Dear Experts, Dear Gurus ,
I am hoping for your help. Unfortuntately the Speaker in my HTC TyTn died
and I need to send back the TYTN to the service center in order to get most likely the speaker replaced ( dead ).
Here my isue:
I want to flash the original stock rom, which is:
RUU_Hermes_1.18.257.2_1.18.257.106_1.03.03.10_Qtek_GER_Ship.exe
I have running now and downgraded from WM6 to WM5:
HTC_BOOT HERM200 IPL-1.04 SPL-2.10.Olipro ->>> not OK :-(
ROM HTC German QTEK_102 1.18.257.2 05/30/06 ->>> OK
EXTROM 1.18.257.106 ->>> OK
RadioRom 1.41.00.10 ->>> not OK :-(
Protocol 32.34.7010.01H ->>> OK
OS Build 14955.2.3.0 ->>> OK
AKU 2.3 ->>> OK
The issue is now, how can I restore the original bootloader ? I can only
flash the rom with the RUUWrapper, the result of flashing the original stock
rom is then, that I am still stuck with the modified bootloader and a corrupted
radio rom. Radio Rom was "fixed" by me by flashing the latest version.
If I would try to use the original flasher I would always get an Update Error [260].
So what can I do to resotre the HTC TyTn to its original status, so that the warranty is not voided ... original stock bootloader, radio rom image and so on.
Thanks a lot and hoping for your support, since I am realy lost here.
Sbrani
grab sspl (soft spl) and use that to flash a stock bootloader only.
as far as i know you cannot downgrade the radio due to it being bootloader 0108 variant, but not having a hermes i might be wrong
You can restore the original SPL bootloader by using SSPL but you will not be able to downgrade the Radio as the original has HTC_BOOT 0106.
You have already checked these guys that they haven't released an update?
First of all, thanks a lot for replying, but still the question is, how I can get rid of the HERM200 IPL-1.04 SPL-2.10.Olipro Bootloader. I would need to downgrade once again to the original HTC bootlader 106. As long as I have the other one, I will always end up, with a non working radio rom, since this stone old radio rom is not compatible with the new "IPL-1.04 SPL-2.10" bootlader. Any further Ideas ? Anyway the sspl (soft spl) did the trick and was able to flash orignal rom, but unfortunately with the same result, still not the original bootloader and the radio rom is now again corrupted :-(.
The bootloader hindering you from downgrading to the original radio is not the IPL/SPL combo but instead the built-in bootloader of the radio itself. Read more in the Wiki.
To put back your original SPL loader, use NBHextract to extract the SPL image from the ROM update file you used to downgrade the other bits in your phone, then use NBHgen to create an update file containing only the SPL and then use SSPL for the update.
Hey great support here ! Finally I also managed to restore the original bootloader, which is HERM200 IPL-1.00 HERM200 SPL-1.04. Now I only have to get the original radio rom running. Thanks a lot, seems that I can think now of actually reaching the final goal. I learned a lot. Great community !!!
You're missing the point about the radio. Let me repeat:
You can't install the original radio ROM. You will brick the phone!
abubasim is right, you have htc_boot 0108, so you can only flash radios with htc_boot 0107 or 0108, but not 0106. Your original radio has 0106, so if you flash it you'll get a NoGSM error and a bricked phone.
about downgrading to WM5
pof said:
abubasim is right, you have htc_boot 0108, so you can only flash radios with htc_boot 0107 or 0108,
Click to expand...
Click to collapse
Well Pof, abubasim, Couldn’t sbrani downgrade the radio with custom RUU to his own original Rom Radio first?? (almost the official known Radio is 1.38) then following your description. At that time he gone have WM5 Rom and same Radio as original, I just wondering if u can du like this
Don't worry guys I bricked several times now the radio rom . It's just that it is then extra work. I will keep you updated, as soon I have news, for now I can't see anymore those "upgrading" tools. I will try it again tomorrow.
you where able to unbrick because you had HardSPL, but now you have SPL-1.04 which will not allow you to flash unsigned code.
By the way, did anybody have experience with HTC or better to say HTC Serivce Providers. As far as I know I have to send it to Teleservice in Germany. Are they realy checking the installed rom ? Thanks for the info.
Ok, I made it finally, I will post exactly how I did it, maybe it helps someone who will be in the same situation.
Thanks once again, great SUPPORT !!
Sure you'd HELP me!
Hi there,
Hi Sbrani, I'm in the exactly same situation: HTC TYTN (Orange France) without speaker... and needing to go to french HTC support.
I upgraded both ROM and Radio to the latest versions following step by step the tutorial found here and on mr (???) on its website (very well done by the way).
Sbrani, Please could you help me to restore as you did, my factory defaults?
Regards
Fly
Can you give more facts ? Pls look into my first thread and put down the infos. Thx
Guideline: How to downgrade to an original rom
Ok here we go this is how I solved this issue.
First you need to understand the difference between a normal SPL
and the modified SPls, which you can get here:
http://forum.xda-developers.com/showthread.php?t=296722
A standard SPL will not accept any unsigned code !
In case you bricked it already look here :
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
1. you need to figure out, which radio rom matches your rom you want to flash, otherwise you end up with a bricked radio rom or even totally bricked,
if you have a standard SPL.
2.Please check it here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
for the roms
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
for the radio roms
3.Looking at my ROM, which I needed I flashed 1.10 - Olipro SPL - based on 1.04,
I flashed it by using SSPL.
4.I flashed then the needed the radio rom
which was Radio upgrade only using CustomRUU 4.3 V 1.38.30.10
5.I used then Custom RUU Updater flashing the needed rom,
but without the included radio rom.
Costum RUU Updater you can find here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_CustomRUU
extracting and modifying is explained here:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=22&Itemid=27
actually it is an how to downgrade from WM6 to WM6.
Please have a close look on how to extract the rom and how to create a
costum rom, which will fit your needs. The self made rom,
should then include the original IPL and SPL loader.
I finally used again SSPL to flash the self cooked rom.
Sorry if the guide is not very precise or not correct at all !!
Everybody is welcome to correct me and to finetune this guide.
LAST BUT NOT LEAST, please read the HERMES WIKI, it was a great help for me !!
Thank you!
You deserve a Very Very Warm thank you!
I'll try all you advised me this week-end.
Regards,
FlY
it's very good already. i think you should get it incorporated into MrVanx's guide as a downgrade for servicing section
Thanks for your guide sbrani, I have not had to downgrade yet, but it something that is in the back of my mind as I know it will be very difficult if I ever need to.
I would also second the comment that I would be very grateful to MrVanx if he wrote a general guide on how to return to factory condition , as it is much more involved than upgrading. It's one thing to flash a phone, a totally different thing to customise a ROM update in order to only flash a specified portion.
@sbrani:
What version is your radio ROM at now? 1.03.03.10 or 1.38.30.10?
hi
i have a G4 imate jamin
i upgraded it to wm6 evo8enbefore upgrading i used the instructions to first install RUU_Prophet_220734_2207114_024721_NVID and then upgrade to wm6.
my imate has changed into a QTECK (welcome screen)
but now that i want to downgrade and use the imate original rom i cant
it gives me error 296 (the nbf file cannot be used.)
i tried to CIDunlock using the wiki method.
when i run the downgrade.bat it worked fine and finished but when i soft reset to do the next steps (runnıng unlockcid.bat) my imate freezed and did not boot.
can some body help me on how can i install the imate orginal rom on my jamin again???????
By installing RUU_Prophet_220734_2207114_024721_NVID.exe you probably upgraded your SPL from 2.13 or 2.15 (i guess) to 2.20 and now when you try to downgrade your rom you receive that error.
I know because i did exactly the same thing with my first prophet but later I found dopod 2.15 . . . rom which didnt change my second prophet's SPL.
Now, since there is no solution (yet) for downgrading (unlocking) G4s the only thing you can do is: http://www.imei-check.co.uk/m600unlock.php. I havent! done that myself but someone sure has... Or you can try some other WM6 roms like Touch, Mysterious, etc.
Oh, and btw CID unlock is for G3 ONLY!!!
Maybe someone should update that guide so people dont get into these situations
mcupurdija said:
By installing RUU_Prophet_220734_2207114_024721_NVID.exe you probably upgraded your SPL from 2.13 or 2.15 (i guess) to 2.20 and now when you try to downgrade your rom you receive that error.
I know because i did exactly the same thing with my first prophet but later I found dopod 2.15 . . . rom which didnt change my second prophet's SPL.
Now, since there is no solution (yet) for downgrading (unlocking) G4s the only thing you can do is: http://www.imei-check.co.uk/m600unlock.php. I havent! done that myself but someone sure has... Or you can try some other WM6 roms like Touch, Mysterious, etc.
Oh, and btw CID unlock is for G3 ONLY!!!
Maybe someone should update that guide so people dont get into these situations
Click to expand...
Click to collapse
yes this should be notified properly ,also usb switch is missing in instructions too .
hi guys..i have a qtek 9100 g4 unlocked by hard spl...can you tell me what means downgrade before upgrade and how can i do it because wm5 contains ipl/spl?daca imi poate explica cineva in romaneste ar fii perfect /thanks !
This downgrade means reverting to your stock ROM. You stock ROM can be flashed to your device. (However you should remove HardSPL first because I don't know if it will cause RUU to treat your device as a G3).
However if this is your first time of HardSPL and you are already using stock ROM (i.e. never flashed), you can go ahead to flash WM6.
sorry...misunderstanding
starkwong said:
This downgrade means reverting to your stock ROM. You stock ROM can be flashed to your device. (However you should remove HardSPL first because I don't know if it will cause RUU to treat your device as a G3).
However if this is your first time of HardSPL and you are already using stock ROM (i.e. never flashed), you can go ahead to flash WM6.
Click to expand...
Click to collapse
1.i already patched with hard spl and i have a wm6 rom but before change wm6 roms i must downgrade to wm5 but i don`t know what is my old wm5rom and i suppose(but not sure)it was in german language so if i want to remove hard spl i must know for sure my old rom or there is another way to do that?
2.i don`t understand why i must downgrade everytime before upgrade to a new rom ,so if you enlight me i will thank you very much.
3.do you think the hard spl solution for ``unlocking``g4 wizards will brick my device?
....regards..
I want to back to the original rom too but im not sure i have already a cid unlocked g4 o2 mini s but the strange thing its when im in device info it says its wizard100 but im sure its a g4 so thats matters? thanks for your help.
so its there a problem if i go back to original o2minis iplspl or i have problems because in my device is wiz100 at the back of the battery said it is wiz200 what can i do please help.
Hi Guys.....
I really need your help as i came from the country which i dont know to whom i should as for help.
I bought a used Topaz,again...Before this i dont have any problem to flash.Once flash HardSPL and every day i flash any new custom ROM.Its a habbit.....but i sold it already and now i bought it for the second time.
This time bundle with WM 6.5 but when i check bootloader it shows HardSPL 2.51 and no 'olinex' around there.
Then try to HardSPL again and it says something error due to commercial etc...etc...and also cannot flash any custom ROM...it just stucked....
I did a research and request for unlocker from HardSPL support but theres no answer...I did PM one of the Guru here but no reply also..maybe he's busy,its ok.
Now im stucked and pleaseee please guys i need to flash a custom ROM...What should i do?
anybody?my pm alsonobody answer...pls guys...