Related
FIXED! Read below for details.
So i've been messing with my mogul for nearly 4 hours now trying to convert it to dcd's rom..and i've flashed it twice now and after it reboots from being 100% loaded it just sticks on the HTC black screen..I've read and read and searched and searched and cannot find a definite answer. Can anyone help?!
basics?
did you load the radio rom?
did you load the unlocker?
you may need to restart the phone to the boot loader and resend the rom
(press and hold camera and power and push reset button)
I did TRY and reload the radio and unlocker..now im stuck at the black htc screen where it says no radio though. bleh. i can't even get it back up and running. what do i do?
edit:
I'm at the multi color screen..ive tried running the unlocker RUU and then running dcd's ruu and it doesn't work..and the radio RUU does not run at this screen...I can't get the phone back to a working status! Argghhhh. It wont let me run the relocker unless im in activesync...but i can't be recognized in activesync unless the phone is up and functional..so..? how do i relock it to put hte stock rom on to try and unlock again?
I am kinda stuck in the same spot, but mine is is the verizon logo screen, i tryed doing the power,camera and hte reset button but its till stuck, i tryed the relocker but i need to be in active sync
any help?
what i dont get is..i flashed it with the unlocker, then the rom then the radio...isn't RUU just overwriting each one or something? it doesn't make sense to me. and all i can do is run RUU..i did the rom, then the radio and it was stuck in the bootloader so i used the exitbl and got out of it but then it just went back to going to the HTC black screen saying no radio. ..i'm gonna try and flash the rom from a sd card next..we'll see what happens..
jkrolcz said:
I am kinda stuck in the same spot, but mine is is the verizon logo screen, i tryed doing the power,camera and hte reset button but its till stuck, i tryed the relocker but i need to be in active sync
any help?
Click to expand...
Click to collapse
This just happened to me after flashing the ROM but not the RADIO yet. Flashing the Radio fixed the problem.
I've flashed the radio..then its stuck in the BL and i use the program to get me outta it then it just keeps saying i have no radio! what the hell..this sucks. i'm in the worst possible situation to have to buy a new phone
There are three parts to the "operating system" of your phone.
1. Bootloader (also called locker, unlocker, re-locker, SPL)
2. Radio
3. ROM
The three components are saved in discrete portions of the device's memory. Flashing one does not overwrite the others. All three must be compatible for the phone to operate properly. If you stop the upgrade process recommended by the ROM compiler prior to completion, your phone may not operate properly. If you flash the "leaked" 3.16 ROM package, it contains all three components.
To use the 3.16 stock OEM ROM, or a custom ROM based on the stock OEM 3.16 ROM, you must have a level 3.xx radio and a level 2.xx bootloader. The current implementations of those are the 3.27 radio and either the stock bootloader distributed with the "leaked" 3.16 ROM package, or the Olipro 2.40 unlocker.
If you are running a level 2.xx stock OEM ROM, or a custom ROM based on a stock 2.xx OEM ROM, you must have a level 1.xx bootloader and a level 1.xx radio.
Custom ROMs are not always named using the OEM convention, so you must research the custom ROM to determine whether it is based on a level 2.xx or 3.xx stock OEM ROM.
I hope this helps all of you get your phones back up and running.
FIXXXED!
So heres the best description I can give of what was going wrong for me..Its my first time trying flash to a different rom..and well it didn't go so well. First, I used the titan unlocker, then installed the radio (not sure which one) and then some form of the newer dcd rom and i was getting stuck on the black HTC smart mobility splash screen where it said "no radio". I had to have messed around for over 5 hours today at college trying to figure it out by doing different arrangements what order i installed the radio and unlocker and rom in. I couldn't get it to connect with activesync so i couldn't use the titanunlocker.exe..all i was going off of was RUU's. Im not sure whether or not what OS I was using effected it..I was playing in Vista earlier today but had done the correct steps to install the drivers, and now this last time i did it on XP. This last time I ran the 3.27 radio RUU as found.. here ( http://forum.xda-developers.com/showthread.php?t=362563 )...Theeen I ran this form of the newer sprint ROM. (I'm pretty sure they say it comes with a included in this RUU, but i'm just stating exactly what I did) the .651 rom can be found.. HERE ( http://forum.ppcgeeks.com/showthread.php?t=16806 ) He had a error when packing or something so you have to manually rename it to .exe because it was missing a e..I did this within winrar before extracting..ran that and about 10 minutes later it booted up and i've got service. I'm not going to promise that this is 100% functional all i'm saying is im out of that horrid black HTC screen where I can now go on to try and get the correct rom i wanted. Hope this helps..may be a bit confusing and probably did things wrong but this was my first time doing it all.
Hey All,
i've been doing alot of reading here on xda and have played with and updated several WM devices. didnt want to start a thread but it was my last resort for help.
I've got an HTC 6800 - TITA100 , from Bell mobility. i'd like to upgrade it to DCD's most recent ROM. here's what i've been able to do:
-installed SPL 2.47 bootloader successfully.
-grabbed the 'RUU_signed.nbh' from DCD's 3.2.5 ROM & renamed it to TITAIMG.nbh, placed on properly formatted sd card.
-sent the phone into bootloader (power,camera,reset buttons), it sees the img on the card, press the button to install, and it installs successfully.
this is where the problem comes up. after installation, i reboot the phone, goes to the first splash screen which still shows the Bell logo, and at the bottom i notice D: 3.2.5 , then it goes to a bell splash screen with no other writing, and just sits there.. doesnt get past this splash screen.
what i can do at this point is put the phone back into bootloader, and install the one of the htc/bell ROMs, reboot, and get into the OS without any problem.
is there some steps i'm missing? besides installing the SPL 2.xx bootloader, should something else happen before putting the cooked ROM ?
any help is appreciated !! thanks
What radio are you using?
i downloaded this radio to use: 3.42.50
should the radio be installed before trying to install DCDs OS? i may have tried that but dont remember 100%.
to get it functioning again (OS) i use the bell/HTC official rom, which i notice before the bootloader installs it, it shows that it will update bootloader, 2 splashscreens, radio, OS, etc...
incredible.. had tried so many things. flashed the radio, then tried flashing DCD and it boots fine now.. thought i had tried that already..
profets said:
incredible.. had tried so many things. flashed the radio, then tried flashing DCD and it boots fine now.. thought i had tried that already..
Click to expand...
Click to collapse
Yes. It's always good to load the Radio first. I currently cooked my own NBH file that includes the splash screens, 3.42.50 radio, and DCD 3.2.5 rom. That way I can do it all in one easy flash.
nitro66215 said:
Yes. It's always good to load the Radio first. I currently cooked my own NBH file that includes the splash screens, 3.42.50 radio, and DCD 3.2.5 rom. That way I can do it all in one easy flash.
Click to expand...
Click to collapse
interesting idea.. care to share that nbh? i guess it shouldnt be hard for someone to cook it up themselves if they have all the needed components
Bump!
I'm having the same issue. I'm with Bell Mobility.
I updated the bootloader with nueSPL Titan 2.47 pack and successfully installed the radio.
Then the device remains stuck on the blue bell loading screen. I've tried radio versions 3.35.04, 3.42.40 and 3.42.50.
I'm totally stumped on how to resolve this. Where do I find the RUU_signed.nbh?
Any advice would be greatly appreciated.
Thank you!!
Press and hold Power and Camera and then press the reset button.
This puts it in Bootloader mode, then run the DCD's rom or Kitchen, when the Rom Update Utility starts, it will detect your phone and flash the rom.
Once the flash is finished, the phone should boot normal, and you can flash any other custom rom to the phone. It's just important to do the first 3 flashes correctly, then afterwards the rest is easy.
BTC
The flashing can now begin (without fear of not being able to return it to stock form)! And for those who need a way to return to stock form, HTC has come through!
http://www.htc.com/us/support/pure-att/downloads/
HTC PURE (AT&T) Original Ship ROM | 02.05.2010
This software is the actual ROM that the HTC PURE (AT&T) shipped with. less
In the event that the device has a fatal error and cannot be recovered by Soft Resetting or Hard Resetting the device, it may be recovered by reloading the original ROM. Please note that during this recovery process, the device will be Hard Reset and anything that is NOT part of the Operating System (contacts, calendar, music, etc) will be permanently deleted; always make a point of backing up your devices data on a regular basis!
Instructions:
1. Download and save the HTC PURE (AT&T) Original Ship ROM to your PC.
2. Power your device off.
3. Connect your device to your PC via the data USB cable.
4. On the device, press and hold the Volume Down and Power Button until you get the bootloader screen (tri-colored).
5. Once it bootloader mode, wait for "serial" which shows at the bottom of the screen to change to "USB".
6. Once USB shows on the device, on your PC double click on the HTC PURE (AT&T) Original Ship ROM to launch the RUU Wizard.
7. Follow all of the RUU Wizard instructions shown on your PC.
8. Once the update is complete, click Finish in the RUU Wizard and the device will reboot.
9. Once the device reboots it will run through the Customization Process; this must be allowed to complete.
10. Once the Customization process is complete, the device is then ready for use.
http://member.america.htc.com/download/RomCode/HTC Pure/HTCPUREATTOriginalShipROM.exe
A BIG THANK YOU to HTC!
will it change spl
for flashing we use hard spl 1.83olineix
will it change back to stock spl after the flash
Good eye dynamius; I've been hoping that this would show up at some point.
Is this with 2.1 manila?
manila 2.1
chikoo said:
Is this with 2.1 manila?
Click to expand...
Click to collapse
Unfortunately this is with manilla 2.1.
Does this mean we should expect to see a new official ROM in the near future though?
mizzikedamosher said:
Does this mean we should expect to see a new official ROM in the near future though?
Click to expand...
Click to collapse
There is already a new leaked rom but needed to a new hspl to flash it.
Cant Download
Hi
I can't download this rom.
I click in the link and it redirect me to another page, and I keep looping.
Now I'm in Costa Rica and maybe I need to be in USA to download this file.
Could someone upload the file to megaupload or rapidshare or something similar.
I will appreciate that
Thanks
blancofran said:
hi
i can't download this rom.
I click in the link and it redirect me to another page, and i keep looping.
Now i'm in costa rica and maybe i need to be in usa to download this file.
Could someone upload the file to megaupload or rapidshare or something similar.
I will appreciate that
thanks
Click to expand...
Click to collapse
MEGAUPLOAD: http://www.megaupload.com/?d=E01IBRNN
opensea said:
There is already a new leaked rom but needed to a new hspl to flash it.
Click to expand...
Click to collapse
Where is this official leaked ROM you speak of for the pure?
Only ROMs I see out is 3rd party cooked ROMs. Not anywhere close to the quality of official ROMs. And only ROMs that I've seen out that makes a huge difference in anything is the ones with Manila 2.5. Which are horrible in the sense that MMS doesn't work on them, because there is no way of opening it unless you do a registry hack and add a cab for it to open in windows messaging client.
finally! i've been looking forward to this
Thanks
Hey. Thank you very much
Hi
Hello How can I change the band to the following:
Network Type : GSM
Band Frequency: GSM (900+1800+UMTS(2100+900)
Here is a little FYI for anyone interested. I am not sure why but, loading this rom did not replace the HardSPL. Being curious, I had to find out how I could use the stock SPL in this rom to go back to being completely stock. I am not sure if what I did is correct but it worked for me.
I extracted the spl.nbh and ruu_signed.nbh from the HTC download. I tried just running the spl.nbh by renaming it to TOPAIMG.nbh and copying it to the root of the SD. Everytime it would read the file and try to replace the spl it would fail and go back to the load screen. So, I relocked the spl using the spl relocker 1.33 (? I think that was the version). I then applied the spl.nbh (renamed to TOPAIMG.nbh) and it replaced the SPL with a version 1.78. It then looked like it was stuck at 9%. This is apparently some sort of interim SPL used to load the ruu_signed.nbh. After trying to determine what was going on for a little while I decided to put the ruu_signed.nbh (again renamed to TOPAIMG.nbh) on the SD and see what happens. Well, it loaded the original SPL, Radio and ROM and my Pure was 100% stock again.
I am sure there must be an easier way. Perhaps if I had just relocked the SPL with 1.33 and then ran the update it would have been fine. I just wanted to post this information so people know that you can get it back to 100% stock using this download from HTC.
PURE dialer canvas
Great find! Any chance that someone could / has extract(ed) the phone canvas out of this rom to see if it addresses the delay issues associated with the topaz and leo roms?
great find buddy
naplesbill said:
Here is a little FYI for anyone interested. I am not sure why but, loading this rom did not replace the HardSPL. Being curious, I had to find out how I could use the stock SPL in this rom to go back to being completely stock. I am not sure if what I did is correct but it worked for me.
I extracted the spl.nbh and ruu_signed.nbh from the HTC download. I tried just running the spl.nbh by renaming it to TOPAIMG.nbh and copying it to the root of the SD. Everytime it would read the file and try to replace the spl it would fail and go back to the load screen. So, I relocked the spl using the spl relocker 1.33 (? I think that was the version). I then applied the spl.nbh (renamed to TOPAIMG.nbh) and it replaced the SPL with a version 1.78. It then looked like it was stuck at 9%. This is apparently some sort of interim SPL used to load the ruu_signed.nbh. After trying to determine what was going on for a little while I decided to put the ruu_signed.nbh (again renamed to TOPAIMG.nbh) on the SD and see what happens. Well, it loaded the original SPL, Radio and ROM and my Pure was 100% stock again.
I am sure there must be an easier way. Perhaps if I had just relocked the SPL with 1.33 and then ran the update it would have been fine. I just wanted to post this information so people know that you can get it back to 100% stock using this download from HTC.
Click to expand...
Click to collapse
that was a awesome work buddy ..
perhaps someone can re package the relocker with spl found from the download
Sucess
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
dinakar407 said:
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
Click to expand...
Click to collapse
So that confirms you have to relock the spl before it will replace the hardspl with the original spl. That is good to know.
relocker replaces the spl to stock spl version 1.33
flashing again flashes the spl to 1.83
dinakar407 said:
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
Click to expand...
Click to collapse
which rom ? ive downloaded the exe and notcied there were 2 nbh files, just wasnt sure
can somebody please help me, I have flashed 5 different ROM's to my vodafone HD2 and have encountered a varying degree of problems with each one. I would very much like somebody to tell me where I can get a Stock ROM not locked to any carrier so I can reflash my pretty usless fone or indeed to help direct me to a stable cooked ROM that would allow my fone to work again.
Thanks is advance.
P.s - my first post so please be gently, also the last 3 I have tried are Artemis ROM's with no sucessful outcomes.
peeko1979 said:
[Q] htc hd2 stock rom 6.5.3
Click to expand...
Click to collapse
there is no stock rom that is 6.5.x They are all 6.5
Not sure what you mean by stock rom not locked to a carrier, , do you mean a non branded rom (the ones marked HTC WWE, look HERE or in the various threads in the rom development section.) or do you mean you want to unlock your phone to use any network? in which case no amount of any kind of flashing will do that. Ask voda for a code, or buy one online.
Sounds to me like you need to return all the way to stock and start over. Get any of the voda roms from that link above (theyre marked vodaphone, you cant miss em, theres a 1,43 one, a 1.66 one ((if you're a brit)) or 1.72 if you have a european language voda.
Get that, and either
1 - remove hspl by running hspl.exe and choosing 1.66.0000
then
2 - run the downloaded rom.exe and flash over usb
or
1 - extract ruu_signed.nbh from the rom.exe you downloaded,(look it up if you dont know how) copy it to a formatted fat32 sd card smaller than 8gb, and rename it leoimg.nbh then start the phone into bootloader and it will ask you if you want to flash.
that way you are back to teh start, and you can apply hspl and start again.
(For people reading this thinking 'he didnt say do a task29',, its my understanding that using the official .exe to flash the rom does a task 29 anyway, and its been edited out of customruu.exe so it can be used to flash radios without wiping the rom,,,correct? yes no?)
I try 6 Rom but noone will work fine
Vodafone rom 1.72
I am not looking to unlock the fone, simply find a Rom that is 6.5.3 that is stable. I have just flashed back to voda 1.72 but that is 6.5, im fussy and don't like the start button at the top. I'm in scotland so need something that will work here ok on vodafone.
I was hoping to find a rom that had not been altered and as such an original (Stock) ROM.
your help is much appreciated.
There are no such stock roms for the HD2. If you want to flash a stable rom in the style you like (start button at the bottom) then you will need to HSPL (search the forum) your phone and I suggest you start with Dutty's rom. It's very stable and as close to stock as can be. You can always flash back to an original rom for warranty reasons if you need to.
tnx, trying one now. fingers crossed.
ok, just flashed one of duttys roms but now my phone will not boot, it turns on and stays at the htc splash screen. Wont turn off have to pull out the battery. If it will not boot how can I re-flash it? Any suggestions?
did you flash hspl? you will also need the newer radio 2.15.50_04
Quote from Dutty's first page:
Things to Know how about my ROMs:
* HSPL 1.66 Minimum required
* New Radio 2.15.50.04 can be flashed here:
http://forum.xda-developers.com/showthread.php?t=801252
* :Added XDA UC_NET_v0.94 for Auto install see here for instructions:
Thanks to ahirshfield for recommeding it and serfer222 for great work.
http://forum.xda-developers.com/showthread.php?t=709557
* :HSPL 1.66 Minimun recommended
* :Radio 2.10 / 2.11 / 2.12 / 2.14 / 2.15 NEEDED for ROM
* :No Radio version is included in these releases:
* :Correct radio needed to enabled 576 ram for NON-T-Mous HD2 users.
* HD2 Radios can be found here:
http://htcpedia.com/forum/showthread.php?t=2199
I hope you did some reading before you flashed!!
Put your phone into bootloader by holding the vol down side key and use a pen to push the little reset button when the back cover is removed. You should get a tri colour screen which shows you the hspl version you have. If you do this you can flash the correct radio which is probably why the phone will not boot.
all I have done previously is downloaded .nbh files and used SSPL_RUU.exe to flash and they have all flashed sucessfully, but with the after effects of either connection problems or freezing issues.
I have managed to re-flash to the vodafone 1.72 software so at least it is working again, this is not by any means where my talents lie. im a hardware guy, not software, so finding this all a bit confusing. I may just go with the artemis v33 rom which seemed to work the best apart from occassion signal dropouts.
Just out of curiosity - which hspl and radio are you using?
in the settings it says radio 2.07.51.22-2 and i believe the hspl was 1.42
just checked bootloader, spl 1.66
peeko1979 said:
just checked bootloader, spl 1.66
Click to expand...
Click to collapse
If you are sure it's SPL, than your problems are normal sir. To be able to flash custom ROM you need HSPL ex (1.66 HSPL)
is there another way to check other than in bootloader?
peeko1979 said:
is there another way to check other than in bootloader?
Click to expand...
Click to collapse
No sir only bootloader.
I have just re-flashed v33 artemis, so will stick with that, might look at updatin radio version tho. all help much appreciated but must away now as wokring in 5 hours.
Have looked around but cannot find a stock Cingular HTC Titan (Eternity ?) rom. Previous thread hosted by Football is defunct.
Can anyone please point me to Stock Singular HTC Titan rom?
I am trying to uninstall HSPL ( I am at the dreaded 2.5 SPL, ATT Titan 1) and need this stock rom to try to revert back to 1.0 SPL.
For my ATT HTC Titan I, I debranded, SPL, HSPL and it says HSPL is there on the Phone's SPL screen - but I cannot use any custom rom that uses Radio 17. Only radio 16 works.
Thanks
my SPL screen shot
My SPL screen shot is attached below
BTW, anyone see any issues with the SPL screen above?
I am unable to run any rom that needs radio 17.
lund123 said:
My SPL screen shot is attached below
Click to expand...
Click to collapse
Your HSPL is good.
When you flash rom that needs radio 17. you Flash radio 17 too?
lund123 said:
My SPL screen shot is attached below
Click to expand...
Click to collapse
There is nothing wrong with your phone; in fact there are many here who would give their life to own your phone. For many of the custom ROMs here you have to flash "radio 16" with radio 17. If you have not done this then your phone will be stuck at the HTC logo on startup. You have "gold" in your hands and you don't know it.
lund123 said:
Have looked around but cannot find a stock Cingular HTC Titan (Eternity ?) rom. Previous thread hosted by Football is defunct.
Can anyone please point me to Stock Singular HTC Titan rom?
I am trying to uninstall HSPL ( I am at the dreaded 2.5 SPL, ATT Titan 1) and need this stock rom to try to revert back to 1.0 SPL.
For my ATT HTC Titan I, I debranded, SPL, HSPL and it says HSPL is there on the Phone's SPL screen - but I cannot use any custom rom that uses Radio 17. Only radio 16 works.
Thanks
Click to expand...
Click to collapse
Please no, why?
You are one of the few with the ATT Titan's to have HSPL on there.
---------- Post added at 11:07 AM ---------- Previous post was at 11:06 AM ----------
lund123 said:
BTW, anyone see any issues with the SPL screen above?
I am unable to run any rom that needs radio 17.
Click to expand...
Click to collapse
That is because you need to flash radio 17 after you flash the rom
lund123 said:
My SPL screen shot is attached below
Click to expand...
Click to collapse
locky you, have hspl 2.5, if you want change my divece for your divece....... what you said? :angel:
Guys, I have tried the roms listed here on this site that also have the associated radio files as well But everytime I install a custom ROM, with the radio 17, my phone stops at th e HTC logo and never moves from it.
Also, I cannot update the SPL 2.6 from HTC now - it always stays at SPL 2.5
My only need is to unlock my phone so that I do not have to keep enterting the unlock code everytime the phone restarts. I have bought the unlock code from ebay and it does work, but have to keep entering it after every boot cycle.
I found the cingular Eternity 1.0 ROM, installed it - but the SPL continues to remain @ SPL 2.5 with the HSPL info as is on the SPL screen.
lund123 said:
Guys, I have tried the roms listed here on this site that also have the associated radio files as well But everytime I install a custom ROM, with the radio 17, my phone stops at th e HTC logo and never moves from it.
Also, I cannot update the SPL 2.6 from HTC now - it always stays at SPL 2.5
My only need is to unlock my phone so that I do not have to keep enterting the unlock code everytime the phone restarts. I have bought the unlock code from ebay and it does work, but have to keep entering it after every boot cycle.
I found the cingular Eternity 1.0 ROM, installed it - but the SPL continues to remain @ SPL 2.5 with the HSPL info as is on the SPL screen.
Click to expand...
Click to collapse
"Lund123" I need you to listen to me for a moment...if your device is stuck at the HTC logo on startup, your radio is incompatible with the ROM on the device. If you have already flashed the custom ROM and it requires you flash the radio it will be with the entire package you downloaded. I use Eburon 2.1; the radio and ROM are separate and both must be flashed from bootloader mode. To use Eburon you must flash the radio that comes with it. Your device is HSPL; it needs no further tinkering with. The custom ROMs can be flashed at will. One warning, a return to official stock ROMs will likely re-lock your phone. The goal of these threads are to achieve what you apparently don't realize; you are HSPL. It is not automatic for many of us to achieve this; HSPL opens your device in a way that can only be described a dream. You're lucky! Flash the radio separately from the bootloader; it's no different than flashing the ROM. In regards to having to re-enter a code; it appears your device may not be subsidy (carrier) unlocked or there is a security lock put on the device which it will ask before it launches the OS. That may require you running what a few of us in the old days did with our HD2s and Rhodiums...perform a task 29, but you may need a deeper "wipe" something akin to a low-level format on a PC.
"berrywr": I get that HSPL is already on the phone, and I am grateful for that. But I believe, I have loaded both the custom rom + radio that comes with it with no positive results.
I have tried the Dynamics ROM (as an example) and the Radio that comes with tit. First I flased the ROM uising the bootloader method. Then I repeated the same for the Radio. Same results, stuck on HTC logo. I have used the RUU program that it comes with to load the roms. I even have tried using the GOLDCARD for these roms, but same results. And Yes, I get it that I need to install the rom first and then the radio that comes with the package. Interestingly, my Radio on the SPL screen never changes to Radio 17, it always stayed 16 (like in the image posted on the 2nd message, I have never seen it read Radio 17.xxx).
Thanks
berrywr said:
"Lund123" I need you to listen to me for a moment...if your device is stuck at the HTC logo on startup, your radio is incompatible with the ROM on the device. If you have already flashed the custom ROM and it requires you flash the radio it will be with the entire package you downloaded. I use Eburon 2.1; the radio and ROM are separate and both must be flashed from bootloader mode. To use Eburon you must flash the radio that comes with it. Your device is HSPL; it needs no further tinkering with. The custom ROMs can be flashed at will. One warning, a return to official stock ROMs will likely re-lock your phone. The goal of these threads are to achieve what you apparently don't realize; you are HSPL. It is not automatic for many of us to achieve this; HSPL opens your device in a way that can only be described a dream. You're lucky! Flash the radio separately from the bootloader; it's no different than flashing the ROM. In regards to having to re-enter a code; it appears your device may not be subsidy (carrier) unlocked or there is a security lock put on the device which it will ask before it launches the OS. That may require you running what a few of us in the old days did with our HD2s and Rhodiums...perform a task 29, but you may need a deeper "wipe" something akin to a low-level format on a PC.
Click to expand...
Click to collapse
lund123 said:
"berrywr": I get that HSPL is already on the phone, and I am grateful for that. But I believe, I have loaded both the custom rom + radio that comes with it with no positive results.
I have tried the Dynamics ROM (as an example) and the Radio that comes with tit. First I flased the ROM uising the bootloader method. Then I repeated the same for the Radio. Same results, stuck on HTC logo. I have used the RUU program that it comes with to load the roms. I even have tried using the GOLDCARD for these roms, but same results. And Yes, I get it that I need to install the rom first and then the radio that comes with the package. Interestingly, my Radio on the SPL screen never changes to Radio 17, it always stayed 16 (like in the image posted on the 2nd message, I have never seen it read Radio 17.xxx).
Thanks
Click to expand...
Click to collapse
It's possible you have the radio glitch where the radio does not change after flashing. Have you tried searching the Titan thread, to see if anybody else has mentioned the problem? I know I swear I've seen this happen to other users...I will do a search tonight to see if I can find anything.
I have looked around and most of the folks are having trouble getting the HSPL to load, my problem has not been stated elsewhere that I could find. I for some reason have the HSPL but I cannot do the following:
1. Cannot use the HSPL program to revert back (uninstall HSPL). When I tried to install OSPL from within the program it errors out.
2. If I install any other radio than 16, it does not take affect - the update goes successfuly, but the SPL screen shows radio 16
3. I cannot install the SPL 2.6 from HTC - it does not take affect. The SPL screen still shows 2.5. Since I cannot have SPL 2.6, I am unable to get some OS updates.
Will keep looking. RUU and goldcard programs - both working properly but result in same outcomes.
xconomicron said:
It's possible you have the radio glitch where the radio does not change after flashing. Have you tried searching the Titan thread, to see if anybody else has mentioned the problem? I know I swear I've seen this happen to other users...I will do a search tonight to see if I can find anything.
Click to expand...
Click to collapse
hiii there .. can i find a link to htc titan stock cingular rom or nbh files for debrand ?