Ok ..
A friend of mine had a problem when he tried to run the SIM/CID unlocker provided by Pof .. he has an IPL of 1.01 and a SPL that says .. 1.40-olipro .. which is the right spl when you run the unlocker.. but his phone is stuck in bootloader mode.. I told him to try to flash back to official at&t rom to give his phone some life hopefully ..and when he runs the ruu it gets to 12% and bombs out on him with a update error:
ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
Any ideas on what this means?
He has tried soft resetting and trying it again.
Ok he tried flashing the at and t rom again and now his ipl is 1.03 instead of 1.01 .. lol and still stuck in bootloader
lol no ones ever seen an error like that?
Hello, gents.
Trying to upgrade SPL with v7 on a friends 8525 but getting timeout or connection dropped. When attempting to install, it's get's as far as rebooting the device after accepting "yes". It then attempts the SPL install and eventually error 260 shows on the workstation screen with the raibow screen left on the device.
Read somewhere that .NET 2.0 would correct this but I already have it installed.
Error 260 on "Official" WM6 ROM
ehartley said:
It then attempts the...install and eventually error 260 shows on the workstation screen with the raibow screen left on the device.
Click to expand...
Click to collapse
I am having the same error message crop up when I try to install the latest ROM from HTC.
I am on Vista (but that really doesn't matter because A: I followed mrvanx's instructions to add the proper driver and B: I get the same crap from my roomate's XP machine).
When I run the ROM, it checks the PC, and then I get to the wizard. I check that I know this will erase my device, and then I check that I have done all of the things I need to do (activesync, etc.)
I acknowledge that I want to upgrade, and that I am going from my old ROM to the latest ROM, and click next...
At which time my phone screen goes dark and drops my connection via sync and the update bar stays at 0%. 30 seconds later I have a message come up that says Erro [260]: Connection, and some piss poor advice from HTC that says restart and reconnect everything and try again...
My Phone(Herm100 AT&T 8525) is running:
HardSPL 2.10 (v.7)
ROM Version 2.15.502.3
Radio 1.40.30.00
Protocol 32.73.7020.16H
HAAAAALLLLLLPPPPPPPPPP!!!!!!
Just tried to upgrade radio version from 1.47 to 1.54.07 but encountered Error [262] at 100% completion in both Windows side and mobile!
Soft reset it and it seems nothing problem for an hour. Radio version is changed. Does it mean upgrade successfully ?
Is it the most stable version recently?
Just did the titan unlocker and now the p4000 is stuck in bootloader with these 2 lines:
TITA100
SPL-1.20.Olipro
i think i need some help
thanks in advance
Marc
edit:
RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.0 4_PPST_0619_Ship.exe >>> would flashing this ROM and Radio save me or my titan?
orangeworx said:
edit:
RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.0 4_PPST_0619_Ship.exe >>> would flashing this ROM and Radio save me or my titan?
Click to expand...
Click to collapse
yes..............
since i'm stuck in bootloader mode, how can i use the ruu update utility ?
i'm getting connectiong failed and only option is to exit utility
any ideas ?
if u are in bootloader connect the usb cable and the phone should say usb at the bottom, just open up the ruu update and it should work just fine
Error 264
update utility cannot connect to your pda
and it says USB on the bootloader screen
SPL is 1.20 olipro
take your SD card out if (with phone powered off) if u have an image on the SD card and retry
no SD card being used at the moment
edit: it seems now it is flashing...
let's say this does work, fact that i'm putting a sprint ROM on my telus phone is gonna be alright?
re-edit: crashed at 11% - invalid command error 290... RUU encountered a communication error
recovery
at 11%, titan reset and went back into bootloader mode, RUU crashed but gave option for recovery which was "successful"
retried the same RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.04_PPST_0619_Ship.exe
and crashed again at 11%
i think i killed my phone
i can't seem to do anything, not the telus wm6.0 ruu nor the one stated earlier...
is there a way i can revert to my previous SPL 1.04 ?
really appreciate the help @ 5:35 AM
got my telus wm6 to run and then decided to up to olipro 2.40
now it won't got past second splash...
radio is 1.32, rom is dcd 3.2.5
now from my understanding of what i've been reading is that i need to revert to olipro 1.20 to be able to flash my radio
and i can't do that since i can't get activesync.
any ideas ?
Get a SD card. Go to WIKI and following reverting to Stock. Then start over on flashing. I have done as you did and fixed the phone.
your phone sounds jacked up, how long is it stalling at 11%, r u giving it decent enough time?
redownload the latest sprint rom from htc america here:
http://216.139.227.226/RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_TITAN_3.42.02_SPCS2.04_PPST_0718_Ship.exe
let it run for at least 20 minutes before deciding it crashed...after 1st boot softreset before letting it run any customizations
Hello,
I bought a used HTC HD2 device and would like to install android on nand.
I'm quite used to upgrade HTC devices using XDA guides... and did a lot of upgrades on a previously bought HD2 device without any problem.
Here are my questions and the errors I saw...
The bought HD2 seems to be unbranded. How to check it?
Upgrade to shipped ROM
I tried to upgrade the ROM by using the last available upgrade from HTC website, specifying my S/N. I downloaded the RUU_Leo_HTC_ITA_1.66.408.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship file... but I got upgrade error at 8-9% and then device never booted up more.
7 times vibrate error
I got succesfully upgraded it by saving LEOIMG.nbh on SD card (after a lot of try)... BUT after power up I had device stuck on HTC screen playing 7 times vibrate... who seems to be a faulty code.
I tried many reboots without any success... then I removed the battery, waited some minutes and then it succesfully booted up!
Read some forum about but didn't find the answer about the error "code".
HSPL installation
I had to install shipped 2.08 rom to install HSPL and successfully did it by downloading _HTC HD2_RUU_Leo_HTC_ITA_1.48.408.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.
Then I successfully installed 2.08.HSPL
Radio upgrade
To install Android on NAND I need to have radio upgraded... so I tried to upgrade by using many radios from the XDA Radio Thread BUT I always have INVALID COMMAND ERROR 290 and upgrade process stuck at the end of radio upgrade process. Obviously device don't boot up saying me wrong process and at the boot stuck with an error screen.
Why do I have radio upgrade problems? Are they related to 7 times vibrate?
Never tried to get Goldcard... but I suppose if it's a wrong radio (for which I need to use goldcard) customruu process would give me an error, right?