telus users please help - Mogul, XV6800 ROM Development

i simply cannot get a data connection working with any rom or radio i tried only one that worked for me was dcd 2.1.0 with radio 3.27 that was my 1st try since then nothing has worked . and now i cannot get any thing to work mostly trying with the radio installed on the stock sprint rom and any rom i can get my hands on all try to dial EVDO connection #777 but cannot connect i tried *22308 and [email protected] and ESN as password too still nothing will work after i did it the 1st time. any idieas? and also unable to flash back to stock it just says invalid command on ROM updater

You can try this...as this is what I have:
[email protected]

If nothing works for you...try this page, it gives you the required tool to relock your titan.
http://forum.ppcgeeks.com/showthread.php?t=12041
and after...this is the stock ROM from telus:
http://member.america.htc.com/download/Software/Telus_HTC_P4000_WM6_07252007.exe

ya i got it i was using the unlocker wrong ill try again with a custom rom/radio when im at work tomorrow almost off now....thanks alot guys

deathwishkid666 said:
ya i got it i was using the unlocker wrong ill try again with a custom rom/radio when im at work tomorrow almost off now....thanks alot guys
Click to expand...
Click to collapse
did u try changing ur username?
"guys" <-- and btw..im the same person

try this , if still wont work pm me.
http://forum.xda-developers.com/showpost.php?p=2074773&postcount=27

I had the same problem and my answer was a1jatt's rom. My solution was:
1. Relock phone and install stock Telus ROM
2. Installed the OliPro2.4 and installed Sprint ROM rebooting BEFORE customization
3. Installed a1jatt's Telus ROM
4. Install and kitchen I want as data now works fine.
Hope this helps
deathwishkid666 said:
i simply cannot get a data connection working with any rom or radio i tried only one that worked for me was dcd 2.1.0 with radio 3.27 that was my 1st try since then nothing has worked . and now i cannot get any thing to work mostly trying with the radio installed on the stock sprint rom and any rom i can get my hands on all try to dial EVDO connection #777 but cannot connect i tried *22308 and [email protected] and ESN as password too still nothing will work after i did it the 1st time. any idieas? and also unable to flash back to stock it just says invalid command on ROM updater
Click to expand...
Click to collapse

I had the same problem after misfollowing the sprint 3.35 radio rom upgrade, i then flashed a telus rom i made with dcd's kitchen... i tried all the phone codes and nothing was working, eventually i just called telus, they asked if i had modified anything to the phone, i said no then they ran me through the exact same stuff i had already tried,
( username/password) in data settings
after that, they gave me a 'ticket number' and told me to wait for a call.
the next day a friendly dude called me and ran me through all my epst settings. a bunch of them were way off due to the sprint upgrade...
but after he changed them, its been working ever since. i recommend u call telus and just tell them ur internet isnt working and u dont know why.
The settings I had to change were in EPST under M.IP Default Profile: NAI, MN HASPI VALUE(hex), MN AAA SPI value (hex), Primary HA address, and AAA shared secret... instead of numbers they were symbols, so maybe check out what yours are.

Telus Settings
Hope it can help you, did this for you! Good Luck:
Display
nam telus
msid 10DigitPhhoneNumber
nam settings
nam name telus
mobile directory number 10DigitPhhoneNumber
min1 7DigitPhhoneNumber
min2 your area code
msid 10DigitPhhoneNumber
mcc(mobile country code) 302
mnc(mobile network code) 86
nmsi 86+10DigitPhhoneNumber
imsi 30286+10DigitPhhoneNumber
truemin1 oo1896
truemin2 ooo
trueimsi_s oooooo1896
truemcc 302
truemnc 86
truenmsi 86oooooo1896
trueimsi_s 3o286oooooo1896
accolc(accesoverloadclass) 8
cdma settings
ca-sis 283
cb-sisprimary 384
a-sissecondary 691
b-sissecondary 777
mob term for home enable
mob term for sid enable
mob term for nid enable
evrc enabled enable
home page evrc
home orig evrc
rome orig evrc
home sid/home nid
home sid/home nid1 16422 / 65535
17500/65535
modem settings 16384/65535
slot cicle index 2
prefered savings system standard
prefered mode automatic
hdr hybrid prefered enable
clear all mru entry no
security
hdr an auth user id(long) [email protected]
hdr an auth password(long) will program when you do OTAS
pppuser id [email protected]
ppppassword will program when you do OTAS
s ip dune user name [email protected]
data parameter
pocket dial string #777
m.ip settings
number of profile 6
active user profile index o
mip mode mobile id prefered
mip registration retrive 2
mip registration retrive time out 2000ms
mobile nod-ha authentification enable
send registration request only in use disable
doorman hand off optimisation enable
m.ip default profile
enable profile enable
nai [email protected]
dun nai [email protected] Telusmobility.com
mn ha spi set enable
mn ha spi value(hex) 2oo
mn aaa spi 7 enable
mn aaa spi value(hex) 2
reverse tuniling prefered enable
home address o,o,o,o,
primary ha address 255,255,255,255
secondary ha address o,o,o,o,
ha shered secret will program when you do OTAS
aaa shered secret will program when you do OTAS
dmu public key(pkoid) o
mnautheticator(hex) o

Related

no data connection and stock rom *FIXED*

Hi everyone, well i been working on this all day and have finally gave up..
Right now, since i flashed about 2 weeks ago, i still have not had a working data connection.. always fails. GPS works great, but useless if i cant use google maps, and my main reason for purchasing the phone was for the data connection.
I would really like to talk to any fellow *Telus* members that have GPS working + data connection. I seem like i have done everything i can.
Also, if i cant get the data connection working, I was wondering if anyone knows where i can get the OEM Telus rom. I would like to revert back to a stock phone, radio/bootloader/rom the whole kit--incase i want to send it back to telus
Thanks
[edit]
Im currently running dcd 2.2.3 rom
radio 3.27.00
[UPDATE]
See my last post for info on how I fixed my problem!
I am having similar problems on my XV6800. I first went from stock to 1.6.10 with no problems, then up to the 2.1 to 2.3.1, no problems. I then downgrade to try out 1.7 and now I cannot get data to connect. Everything else works fine, but no data. Any ideas would be greatly appreciated.
gario1 said:
I first went from stock to 1.6.10 with no problems, then up to the 2.1 to 2.3.1, no problems. I then downgrade to try out 1.7 and now I cannot get data to connect. Everything else works fine, but no data.
Click to expand...
Click to collapse
I've followed the same "upgrade path" as you and now have the identical problem with my vzw xv6800 and dcd's 1.7.0. I posted in dcd's 1.7.0 kitchen thread since this one's title didn't really match.
So i guess the real question is how do we revert and go back to a stock device so we can try again from the start?
Its weird, so many people have their gps & data connection working fine. I know for me, all i have found is sprint information which is useless for me as a telus client again, any of you telus users out there id like to know your secret
I was having data problems when I first upgraded. If you can try going to settings, personal, phone, services, internet, initiate IOTA, see if that works. If not you may need some programming on the end of your carrier. After calling Sprint it got sorted out and my internet works just fine now.
jemmrich said:
So i guess the real question is how do we revert and go back to a stock device so we can try again from the start?
Its weird, so many people have their gps & data connection working fine. I know for me, all i have found is sprint information which is useless for me as a telus client again, any of you telus users out there id like to know your secret
Click to expand...
Click to collapse
I tried reverting back to a stock rom and that wasn't the case. I'd recommend calling your carrier, but don't mention in the process that you are using a custom rom.
FZ1 said:
After flashing this rom I can't establish a data connection.
Here's the "upgrade" path I've taken on my vzw xv6800.
Stock -> Olipro 1.20 -> 1.40.00 radio -> various dcd 1.6.x roms and others -> Olipro 2.40 -> 3.27.00 radio -> various dcd 2.x.x roms and others -> Olipro 1.20 -> 1.40.00 radio -> dcd 1.7.0 rom.
I've never needed an A-Key or had a problem with voice or data after a flash.
The data connection seems to reject any username/password I enter. I've tried using u:<number>@vzw3g.com p:vzw, and leaving both blank and checking "save password", neither work.
I can make/receive calls fine, IOTA seems to work fine.
I've tried flashing a rom with dcd's BuildOS defaults, and one with only a carrier change to vzw, same behavior with both.
I've found one other person that followed the same upgrade path, and has the same problem, in this post.
Any ideas?
Click to expand...
Click to collapse
illuminarok said:
You have previous data session active from other ROM build. So your account is still logged in on verizon server.
It's like IRC when you get disconnected from internet, then reconnect and login to IRC and see your previous name is still in the channels. You need to wait a bit for it to "timeout".
Have to either call verizon and have them kick off the ghost, or turn off your phone, take the battery out, and wait about 20 minute.
Goodluck!
Hiromitsu
Click to expand...
Click to collapse
This is from the other thread, hope it help.
Hiromitsu
silentbenton said:
I was having data problems when I first upgraded. If you can try going to settings, personal, phone, services, internet, initiate IOTA, see if that works. If not you may need some programming on the end of your carrier. After calling Sprint it got sorted out and my internet works just fine now.
Click to expand...
Click to collapse
My phone doesnt have the Internet option there. I also installed iota.cab but something tells me its sprint specific, it failed aways.
I called *22803 and did the over the air programming that way. It fixed a roaming issue i originally had... somehow after the flash i had ended up with a wrong PRL.
One thing that i have noticed that is very odd. When i enter ##778 and click edit and enter my unlock code and click the View Info and M. IP Default Profile. The NAI value is my hex esn and sprint in the form of an email address!
When i was writing down my provision data (before my first flash) i did a quick look thru of all the options and that value was [email protected] -- not sprint.
Its weird that im a telus user, yet have spring information in my phone.
Further down the list is HA Shared Secret and AAA Shared Secret. These have strange data that i think are probably wrong if the NAI is wrong as well.
Any ideas?
When I first called Sprint they had me replace the HA and AAA secret stuff, but it didn't help me. Somewhere along the lines some of my data was lost and needed to be reconfigured on their end. That may be what has happened to you. You might try downgrading , but in my experience it did nothing, I was still unable to use data when I downgraded.
silentbenton said:
When I first called Sprint they had me replace the HA and AAA secret stuff, but it didn't help me. Somewhere along the lines some of my data was lost and needed to be reconfigured on their end. That may be what has happened to you. You might try downgrading , but in my experience it did nothing, I was still unable to use data when I downgraded.
Click to expand...
Click to collapse
did they have you clear the fields? or enter some info? im afraid to clear it just incase and it would be *super* hard typing it back in lol
They had me retype the HA and AAA, but that wasn't the problem. I think it is best to call them up and see what they have to say. Just tell them you've done a hard reset and then your data connection quit working. Don't let them know you flashed a custom rom and tell them you think you need to reprovision your data connection. That should get it sorted out.
silentbenton said:
Just tell them you've done a hard reset and then your data connection quit working. Don't let them know you flashed a custom rom and tell them you think you need to reprovision your data connection.
Click to expand...
Click to collapse
Calling vzw and playing dumb fixed this for me! They "reprovisioned" my data.
And just so we know what might have caused this,
dcd1182 said:
I have had to reprogram my device every time I go from radio 3.27.00->1.xx.xx
Click to expand...
Click to collapse
I managed to answer my question about stock telus rom.. and managed to get back to factory defaults... everything worked--even data!
So now i need to find a rom made for us telus folk that that i can try out. Can anyone upload the one that works for them to a fileshare site? I am specifically looking for a rom that works on the p4000.
Also, I have tried cooking a couple roms using dcds 2.3.2 kitchen but not luck -- still no data connection. So fustrating being the only one without a data connection lol
FZ1 said:
Calling vzw and playing dumb fixed this for me! They "reprovisioned" my data.
And just so we know what might have caused this,
Click to expand...
Click to collapse
I called telus and played dumb aswell. I asked them if its possible that things got screwed up on their end such as having a phantom me still logged into the data service but the lady said that it was impossible. I also asked if there was anything reprovision yadda yadda..
All she suggested was check my MDN and MSID and if that was ok (which is was) then take it in for warranty.
With all that said and done though, flashing to the stock rom worked. so some how the roms i have been trying just arent allowing me to use the data connection
I don't use Telus so I'm just guessing, but when you "played dumb" did you simply say that you can't establish a data connection after doing a hard reset?
FZ1 said:
I don't use Telus so I'm just guessing, but when you "played dumb" did you simply say that you can't establish a data connection after doing a hard reset?
Click to expand...
Click to collapse
yeah i told the i did a hard reset because my today screen messed up
I am with telus, mine is working perfectly.
Been using different version of DCD roms. I was having lots of problems. like the phone freezing not connecting to active sync after installing programs. I have since cooked 2.3.2 rom and been using it for a few days. Everything seems to be working perfectly.
maybe try flashing your radio again? I was gonna suggest your MSID..etc. But it seems you have checked it with Telus already.
Have you looked in modem and make sure you have #777 in there? (I am sure telus prolly would have had you check that...but just incase)
jemmrich said:
One thing that i have noticed that is very odd. When i enter ##778 and click edit and enter my unlock code and click the View Info and M. IP Default Profile. The NAI value is my hex esn and sprint in the form of an email address!
When i was writing down my provision data (before my first flash) i did a quick look thru of all the options and that value was [email protected] -- not sprint.
Click to expand...
Click to collapse
Also have you tried changing your NAI Value?
my is [email protected]
and DUN NAI: [email protected]
AAA Shared Secret: Should I be sharing this?
Perhaps try doing and RTN reset then reprovisioning your phone? RTN reset is a hard reset that also wipes all provisioning data to defaults. Then you will need to reprogram your phone with MDN and MSID. Only proceed if you know your MSL, MSID, and MDN. Or after doing the reset have Telus walk you through reprogramming your phone.
##786#
menu->reset
Heres what i did on my latest flash using a rom someone else has no trouble running:
flashed from the bootloader screen after the device makes a beep on the computer
first boot, set up screen by tapping points
rom makes customizations and does a reboot
i check my MND and MSID via ##390215 - everything checks out (its my number with area code)
next i head to phone settings and check the number is good there. yep
now i attempt to call my voicemail - works
i call someone - works
next i wanna test data so i first have to set up modem...
Settings > connections > connections
Advanced > select networks - I choose a name "my isp name"
under modem tab i add new and select a name for it "my connection"
next, enter #777 for dialup
fill out user/pass (user being my phone + @1x.telusmobility.com and pass being esn decimal form)
i click finish and open up pie
enter a website - www.google.com
pie tells me its invalid and does not try to even start a data connection
I try installing google maps, so i copy cab to sd card, in file manager copy, nav to My Documents folder and paste
I get access denied. be certain there is enough memory yada yada and same thing happens when i try to copy a file to the sd card -- weird
so i try use camera take some pictures, they save to the sd card and not the internal space - and manually copying doesnt work either
so i check how much space i have free... Storage total: 167.40mb inuse 3mb free 164.35mb, program: total 46mb in use: 23.77mb free 22.23mb
storage card tab says i have 1857.91 mb free
Activesync will not let me connect to the device so i cant try installing software like that.even though i have uninstalled it and reinstalled it, seems to be device issue due to rom
so i double check my device settings: ROM version DCD 2.3.2, Radio 3.27.00, browser msie 6.0, ESN is correct in hex form
at this point i dont know what to do
tried to make this as detailed as i can so someone can possibly tell if i missed a step along the lines somewhere
I think you problem is here:
# next, enter #777 for dialup
# fill out user/pass (user being my phone + @1x.telusmobility.com and pass being esn decimal form)
Click to expand...
Click to collapse
There should not be any username/pass there...at least I don't and it is working for me. I think it is more to do with your ##778 under you NAI...change it there...

Everything works but the internet

I got my phone up and running but the internet is still not working. It keeps telling me incorrect password. I've tried (mynumber)@alltel.net/alltel
jamesfelarca:To change the PRL you can put ##775 in the dial pad and send. Then enter the 000000 for the unlock code and select update PRL ->Menu->Edit and select the current PRL (probably a good idea to have this on your memory card) http://www.corolada.com/prl/ The one you want is 30031. Also you may want to do the ##778 unlock code 000000 and then check the NAM settings MDN and MSID should be your 10 digit number.
Click to expand...
Click to collapse
I've also tried this. How do I get the PRL codes for wilmington, NC alltel?(do i need them?)
I have Alltel PPC6800 and I am running Radio 3.27 and DCD2.3.2 just fine. Download the kitchen and run it. Alfter everything is installed then dial the *228 and pick option 3 for new phone. That will update all the settings you need
Click to expand...
Click to collapse
I've also tried this.
Any help is much appreciated.
nevermind i had to do ##000000 and fix the mdn.

Solved: Alltel guys HALP

Ugh
Can you help me with NAM settings?
I accidentally let the Sprint Customization run when I was trying to update to the newest rom.
and I'm not sure what all I need to change in EPST.
Thanks
there will be issues if the customization ran it will say your in roaming when you are not... i would re flash to the alltel stock rom then upgrade to prevent issues
Agreed....the only solution I've discovered to letting the Sprint customizations run (on a non-Sprint phone) is to reflash your stock ROM, then flash to the desired custom ROM. Good luck!
Would the Alltel rom on HTC's site be considered stock?
I'm trying it now.
Americanmetal said:
Would the Alltel rom on HTC's site be considered stock?
I'm trying it now.
Click to expand...
Click to collapse
Ugh
Still getting "We cannot update your roaming service (2)/ activate your phone (3) through this automated system" when I call up *228.
Just to make sure my security settings are right:
HDR AN AUTH User... [email protected]
HDR AN AUTH Pass... ESN (Hex or Dec?)
PPP USER ID... [email protected]
PPP Password...alltel
NAM name is NAM1 correct?
99 views and only 2 other reply's besides my self.
CMON someone has to know how to help!
Americanmetal said:
Just to make sure my security settings are right:
HDR AN AUTH User... [email protected]
HDR AN AUTH Pass... ESN (Hex or Dec?)
PPP USER ID... [email protected]
PPP Password...alltel
NAM name is NAM1 correct?
Click to expand...
Click to collapse
i'm an allter user but haven't experienced your issue. As far as access to data your username is your ten digit @alltel.net, and your password is alltel. I'm not sure about your AUTH Pass. i have a esn hex and dec available so not sure how to help you.
you loaded the new stock rom from HTC, and when trying to activate your phone it said what?
"We are unable to update your handset via this automated system."
jshaas2 said:
i'm an allter user but haven't experienced your issue. As far as access to data your username is your ten digit @alltel.net, and your password is alltel. I'm not sure about your AUTH Pass. i have a esn hex and dec available so not sure how to help you.
you loaded the new stock rom from HTC, and when trying to activate your phone it said what?
Click to expand...
Click to collapse
My Auth pass is my Hex ESN
You can try flashing stock again. Then call alltel or take it into a store. They'll likely be confused and replace or they'll be able to fix it.
Americanmetal said:
"We are unable to update your handset via this automated system.
My Auth pass is my Hex ESN
Click to expand...
Click to collapse
It will take someone above my knowledge to help you, or you could do the worst thing imaginable and call alltel data tech.
Sounds like your MSL/EPST is no longer 000000. This is just a guess. I bought a phone off ebay that was actually a sprint phone but I got it to work on alltel by changing this back to 000000. I was unable to activate until this was changed. Here is a post I followed to change it.
http://forum.ppcgeeks.com/showthread.php?t=22587
SilverHawke said:
Sounds like your MSL/EPST is no longer 000000. This is just a guess. I bought a phone off ebay that was actually a sprint phone but I got it to work on alltel by changing this back to 000000. I was unable to activate until this was changed. Here is a post I followed to change it.
http://forum.ppcgeeks.com/showthread.php?t=22587
Click to expand...
Click to collapse
Yeah I noticed it wasn't 000000 but I didn't think it would be a problem
I will try this!
SilverHawke said:
Sounds like your MSL/EPST is no longer 000000. This is just a guess. I bought a phone off ebay that was actually a sprint phone but I got it to work on alltel by changing this back to 000000. I was unable to activate until this was changed. Here is a post I followed to change it.
http://forum.ppcgeeks.com/showthread.php?t=22587
Click to expand...
Click to collapse
YOUR THE ****ING MAN!!
****ing everything works now. Awesome
Glad you got it working!!

Nam auto Populate

Hi guys how do you make this work? I have an Sprint TP has been unlocked and Hard SPL-ed, I always flash it with different OS that were cooked by the great chefs here and there but I couldn't find a ROM that actually make the Nam to auto populate. Meaning when I do ##778 to enter the EPST and change my "Mobile Directory Number" and "MSID" under Nam settings, I was expecting that the value under Security and NAI under M.IP would also change, turns out i have to manually change it. Is there a way to make it work?
Are you trying to use on a different carrier? because half the time I ever flashed my Sprint touch pro (on verizon) I had to go back and manually reset all those fields too. It always wanted to go back to the factory sprint settings.
yes im trying to flash it to a different carrier. Is there any way?

Rezound PagePlus Data - Not looking for tutorials

I have my Rezound on PagePlus. My phone says it's Mobile network type is EvDo-rev.A but I get not 3G icon and no data.
I get voice and sms only.
Would ESN reset work?
**Note: When I was at stock 3.14.605.12 I was still having the same issue. I flashed to NeWts to get access to the hidden menu.
I would appreciate any suggestions besides pay someone else to do it for me.
Thanks in advance.
Did you write the CDMA settings to NAM1 and NAM2? You will only get1x data on the Rezound as far as I know. I have not been able to get any better than 1x anyway. Here's some info for you... need to substitute the verizon settings in there instead of the Cricket ones of course...
8. Put phone back into DIAG mode ##3424# call and to to WS 2.7 to unlock only. Go to QPST and connect to 8k port. Read from phone .For me I was able to follow the QPST tutorial with no problem and update both profiles did M.IP and PPP and wrote to phone with no issues. Reboot. When I tried doing the same on 9k port I got "Serious error encountered write aborted". I tried doing it without reading just writing and still got the error message. So I finished the EVDO settings for 9k port in DFS.
9. Put phone in DIAG mode go to WS 2.7 to unlock phone. Launch DFS 3.3.0.7 (I used Demo version and it worked for me) connect only to port 9k do not read! Go to PROGRAMMING tab select DATA tab enter PPP UID (your#@mycricket.com) pwd (cricket) write. Then Go to M.IP go to Selected Profile Settings enter NAI (your#@mycricket.com). Set Prim HA address to 0.0.0.0, set Sec HA address to 0.0.0.0 go to Share Secret User Profile. AAA shared secret (cricket) HA shared secret (cricket). Write current profile settings. At this point you may get failed to write messages at the bottom. Just ignore them. Repeat these steps for NAM2. Press Reset upper right hand corner. If your phone does not reboot on its own reboot it. If you want you can go back into DFS and read phone from PROGRAMMING and DATA tab to see if your PPP settings stuck. Do the same for M.IP if they did not try repeating the process. I had to do it a couple of times got error messages but sure enough they wrote to phone and I was successful in getting data 3g on phone.
10. To check your default settings press ##program# when it asks for password enter 000000 and check NAM CDMA Settings and make sure all your info looks right. Go to 1xEV-DO Data Parameters to see if your PPP settings are correct. Display grouping will give you the correct ESN for Cricket activation just write down your MEID (DEC) mine started with a 25#. Here you can also see your prl to verify its the right one. Exit. You can use ##778# and view your EPST check your M.IP default Profile to make sure your NAI looks all good. If you still see the Verizon NAI, Prim HA and Sec HA of 255.255.255.255 you may have to give it another shot.
Thanks for the reply.
You are right about port 9K. I cannot get the PPP Pass, HDR Pass, HA secrect, and AAA secret to stick.
When I installed the HTC drivers on Windows 7 64bit and Windows 8 64bit under Ports (COM & LPT) it installed as HTC Diagnostic Interface for both 8K and 9K.
In Windows XP 32bit 8K was HTC Diagnostic Interface and 9K HTC Projector Interface.
So I don't know if it's a driver issue which is causing me to not write the values. I've looked in multiple forums and have not been able to install the HTC Diagnostic Interface - 9K driver.
I have WS 3.8.7 full and it writes without errors to port 9K but the values still will not stick. I've tried QPST and DFS Demo; the values still will not stick.
Thanks again.
Solved
I don't know what I did but I know I didn't write the settings to port 9K.
I did use the "open sesame door" in QPST for both port 8K and 9K attempting to write the settings to port 9K, didn't work.
So I used the RUU 1.00.605.3 and downgraded and 3G started working!!
I step RUU from 1.00.605.3, 1.02.605.6, 2.01.605.11, and 3.14.605.12 and 3G was still working.
I restored my backup from NeWts and 3G was not working. I'm not sure why.
I don't have any screen from 3.14.605.12, but I have screenshots from 2.01.605.11.
I'm not sure if this will help anyone but thought I'd add it.
Voice, text, and 3G now working on PagePlus.

Categories

Resources