Related
Hello.
I have a problem I hope someone here can help me to solve..
I have an Orange SPV M3100 that hangs on the Windows Mobile screen when I try to start it.
I'm able to go into bootloader mode, and i have tried using mtty142.exe with the set 14 0 command. It still won't boot. I've also tried to hard reset it.. still won't boot..
What I did was trying to unluck the SIM-lock with the Universal unlocker (HTC_Uni_Unlock_v1) from buzz. At the time I thought universal meant that it worked on all HTC devices (stupid, I know)... And I also thought it was harmless to just try and see if it worked. But I got an error around 92-93% and after that my device won't start. So my radio ROM might be screwed.
I'd like to flash my ROM with the i-mate one (JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship.exe) and then add the ext-rom. But how do I do that when I can just access the bootloader screen? And do you think it will boot again if I'm able to flash it?
Here's some more info about my device:
HERM100
IPL-1.01
SPL-1.04
Thank you very much in advance. Help will be highly appreciated.
No your rom *is* screwed. You can get into bootloader, you can even get to 11% of a dopod etc rom upgrade if you try, but you will not flash a new radio.
You CAN boot the device.
Do a hard reset, but do not press spacebar to reboot after. Instead, do a soft reset. The unit should boot but as you've screwed the radio you will not get a gsm signal and the phone will say unknown sim status.
I know this as I bought one cheap after the owner had done exactly the same as you.
IMEI-check's unlock solution is the only one that works IIRC, and in some cases this re-writes the security area of the phone and repairs similar issues, but in this case I could not get the prog to read.
You need to return the device to HTC - you'll need to pay approx £35 for reflashing back to the orange rom. This is what I had to do.
Currently you cannot book the m3100 in through the web as it's too new, instead email / call them.
http://service.htceurope.com/
edit - or if you're an orange customer ring 150 and act dumb saying it ' won't work'.... :wink:
Richard
What happens if you just leave the phone in bootloader mode and then try to flash any ROM (imate, dopod, htc...)? run 2 times the RomUpgradeUt.exe if you get an error on the 1st try.
If you get an error while running the rom upgrade utility you can monitor the USB port while upgrading (you will see the real error from the bootloader then), there's some more info on this wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
good luck
pof said:
What happens if you just leave the phone in bootloader mode and then try to flash any ROM (imate, dopod, htc...)? run 2 times the RomUpgradeUt.exe if you get an error on the 1st try.
If you get an error while running the rom upgrade utility you can monitor the USB port while upgrading (you will see the real error from the bootloader then), there's some more info on this wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
good luck
Click to expand...
Click to collapse
No, if you want to send it back under warranty do not try to run a rom update as there are no orange rom packages. As described in my post above, it will get to 11% and stop. The device will be in the same state as before, with the same ext rom, but the splash screen and bootloader will have changed.
i.e: it will be bloomin obvious you tried flashing it and failed. Not what you want if you try for a warranty repair....
There is no error from the bootloader - as there is no radio rom present and no security area the upgrade process just hangs.
Richard
fluffcat1 said:
No, if you want to send it back under warranty do not try to run a rom update as there are no orange rom packages.
[...]
i.e: it will be bloomin obvious you tried flashing it and failed. Not what you want if you try for a warranty repair....
Click to expand...
Click to collapse
That's true, do not try to flash any other roms if you want to use the warranty or send the device back...
Thank you very very much for your help guys.
As I'm the administrator of these devices in the company I work for I just grabbed a new SPV and will send this thing back to Orange. It sounded like I'm getting a new one..
Well, I think I've learnt my lession.
Oh, and I have another question. Is there a reg editor I can install on this one so I can remove the app lock? I know I can install java apps, but it's a bit grumpy about apps that needs installation (the developer must be certificated).
Cheers guys.
Hi,
Try to flash a new rom using the SD card method described here:
http://forum.xda-developers.com/viewtopic.php?t=62596
The rom must match your CID. Let us know if it works
pof said:
Hi,
Try to flash a new rom using the SD card method described here:
http://forum.xda-developers.com/viewtopic.php?t=62596
The rom must match your CID. Let us know if it works
Click to expand...
Click to collapse
Errr, did you read the last post? He sent it back......
Richard
I just wanted to let him know there's a possible solution, it just in case he still has the unit
pof said:
I just wanted to let him know there's a possible solution, it just in case he still has the unit
Click to expand...
Click to collapse
Maybe his search is broken as well as his old phone eh?.... :roll:
fluffcat1 said:
You need to return the device to HTC - you'll need to pay approx £35 for reflashing back to the orange rom. This is what I had to do.
Click to expand...
Click to collapse
Sorry to take the thread a bit OT, but just wanted to confirm this again.
So, if I flashed my M3100 with a different ROM, and then had to return the phone to Orange for repair for a different reason, I can send it back to HTC just to have the ROM reflashed, and then send the phone to Orange to get the repairs done?
I've been hesitating on whether to flash the phone with a non-Orange ROM because I didn't want to give up the ability to obtain warranty repair (as there is no ROM upgrade yet). If it's just a matter of £35 and then everything else as normal, maybe it's not so bad...
Thanks!
My SPV M3100 won't start!!!
I also did this, so if anyone can find a solution it would be greatly appreciated.
Also tried this and it didn't work for me:
Try to flash a new rom using the SD card method described here:
http://forum.xda-developers.com/viewtopic.php?t=62596
"I have a problem I hope someone here can help me to solve..
I have an Orange SPV M3100 that hangs on the Windows Mobile screen when I try to start it.
I'm able to go into bootloader mode, and i have tried using mtty142.exe with the set 14 0 command. It still won't boot. I've also tried to hard reset it.. still won't boot..
What I did was trying to unluck the SIM-lock with the Universal unlocker (HTC_Uni_Unlock_v1) from buzz. At the time I thought universal meant that it worked on all HTC devices (stupid, I know)... "
rachelm700 said:
I also did this, so if anyone can find a solution it would be greatly appreciated.
Also tried this and it didn't work for me:
Try to flash a new rom using the SD card method described here:
http://forum.xda-developers.com/viewtopic.php?t=62596
"I have a problem I hope someone here can help me to solve..
I have an Orange SPV M3100 that hangs on the Windows Mobile screen when I try to start it.
I'm able to go into bootloader mode, and i have tried using mtty142.exe with the set 14 0 command. It still won't boot. I've also tried to hard reset it.. still won't boot..
What I did was trying to unluck the SIM-lock with the Universal unlocker (HTC_Uni_Unlock_v1) from buzz. At the time I thought universal meant that it worked on all HTC devices (stupid, I know)... "
Click to expand...
Click to collapse
the above link doesnt work?
zohaer21 said:
the above link doesnt work?
Click to expand...
Click to collapse
IIRC it is this link on the new forum:
http://forum.xda-developers.com/showthread.php?t=277281
spv m3100 don't start
hello guys
I have the same problem about spv m3100. I used "universal unlock tool" to unlock my device and now it don't start,don't boot...I tried the Hermes SD Card flashing methods with qtek001 rom and, a white screen with "loading...." appears for 2 second and then nothing else appened. I think that the method is right but I need to use a different software. what do you think about?
please help me
thankksssss
My SPV M3100 won't start
SD card method is no good as there is no upgrade from Orange until January.
Tried to do a radio upgrade explained here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
But it didn't work just came up with connection error, tried to monitor USB but nothing showed up to find out why, althouth mtty commands always do show up in USB Monitor.
Still have a brick and looking for a solution, hopefully, someday, please someone help me I am loosing my mind.
Hello
How to enter boot mode on HTC 200 ?
My htc hangs on HTC screen.
I'm trying to reflash it.
Thanx
Chris
@chrisro, Please read the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
Thank you very much.
Greets form Poland !
Chris
Need some help...
I tried to flash a new Radio on my Hermes (1.40). Actually to reflash it... (Already had it installed, but this is another story)
While flashing I had 0% update... and not moving
Then CustoRUU said it failed... and proposed me to try again... I have SPL-1.11.Oli
So I could easily restart... get the tri-color screen... But whatever I do... I always refuses to flash... never goes further than 0%... And my USB port works on the PC (tested)... and the phone actually sees once I plug (I get USB apperaing when I plug it)
Has anyone experienced this before ? Can someone help ?
Thanks for your help...
Reflashed the OS ROM and at least I can boot... Kind of unbelievable
A real apin anyway... I have the no GSM problem now, but I guess if I reflash the radio it should work...
Alcibiade said:
Reflashed the OS ROM and at least I can boot... Kind of unbelievable
A real apin anyway... I have the no GSM problem now, but I guess if I reflash the radio it should work...
Click to expand...
Click to collapse
Just cannot reflash it
I tried 1.40 again... get stuck at 0%
So I tried to flash 1.38 instead... Doesnt work. I stay stuck at 0%...
Feel really bad now... If someone can help me...
Thanks
Please refer to the unbricking thread dude, read through it all (i know its a long thread but i can almost guarantee that your situation has been adressed.
look at this guide to flash radio using same way expalined for radio 1.38.xx.xx :
http://www.mrvanx.org/hermes_guide/
The guide is also in italian at this link
mrvanx said:
Please refer to the unbricking thread dude, read through it all (i know its a long thread but i can almost guarantee that your situation has been adressed.
Click to expand...
Click to collapse
I went through it... (Btw didnt precise, I have a X01HT)
Since I have Olipro's Hard SPL 1.11 I should not have any problem... I should be able to flash any NBH with another radio. At least so says the Wiki for unbriking
filippodisvevia said:
look at this guide to flash radio using same way expalined for radio 1.38.xx.xx :
http://www.mrvanx.org/hermes_guide/
The guide is also in italian at this link
Click to expand...
Click to collapse
Thanks, but that s exactly what I had been doing several times... The problem being I get stuck at 0% update...
Alcibiade said:
Thanks, but that s exactly what I had been doing several times... The problem being I get stuck at 0% update...
Click to expand...
Click to collapse
do you get the NO GSM error when the device boots?
if so... it sounds like you bricked your radio bootloader, which I'm afraid is unrecoverable
Olipro said:
do you get the NO GSM error when the device boots?
if so... it sounds like you bricked your radio bootloader, which I'm afraid is unrecoverable
Click to expand...
Click to collapse
HI MAN . .
so there is no way to fix it by software ?? cuz i have the same problem and i'v tryed every almost every thing but there is no way to flash radio rom n stuck in 0%
so what u think to do with my tytn , is there any where to send it to to fix it cuz i'v check the market over here n it cost tooo much to fix it around 500$
cheer
werdow said:
HI MAN . .
so there is no way to fix it by software ?? cuz i have the same problem and i'v tryed every almost every thing but there is no way to flash radio rom n stuck in 0%
so what u think to do with my tytn , is there any where to send it to to fix it cuz i'v check the market over here n it cost tooo much to fix it around 500$
cheer
Click to expand...
Click to collapse
nope, if the radio Bootloader is killed, it's buggered.
Olipro said:
do you get the NO GSM error when the device boots?
if so... it sounds like you bricked your radio bootloader, which I'm afraid is unrecoverable
Click to expand...
Click to collapse
Yes I get the No GSM error when booting
Olipro said:
nope, if the radio Bootloader is killed, it's buggered.
Click to expand...
Click to collapse
Then I am dead...
Olipro said:
do you get the NO GSM error when the device boots?
if so... it sounds like you bricked your radio bootloader, which I'm afraid is unrecoverable
Click to expand...
Click to collapse
No chance to fix it ?
I have been watching this thread, Is there a way to avoid this Oli. This has not happened to me but I do want to make sure that I do not run into troubles with future flashing. I hardly post, to busy reading everything and as you can see from my signature I have Hard SPL 1.40.
Thanks
Alcibiade said:
Yes I get the No GSM error when booting
Click to expand...
Click to collapse
The strange thing is whenever I take out my SIM card and put it back I do not get the "No GSM" message. nd the phone works... That's primarly why I tried to update the radio... To fix this annoying problem...
I just tried again... Removing the SIM, puting back, I get the network, can use the phone. And now, and now......... it's flashing !
Waoh waoh waoh... I guess kind of lucky on this... And I a SURE it's nota misplaced SIM that is the origin of my problem... Still flashing now, will tell the result later
Thanks Olipro for your support
Alcibiade said:
The strange thing is whenever I take out my SIM card and put it back I do not get the "No GSM" message. nd the phone works... That's primarly why I tried to update the radio... To fix this annoying problem...
I just tried again... Removing the SIM, puting back, I get the network, can use the phone. And now, and now......... it's flashing !
Waoh waoh waoh... I guess kind of lucky on this... And I a SURE it's nota misplaced SIM that is the origin of my problem... Still flashing now, will tell the result later
Thanks Olipro for your support
Click to expand...
Click to collapse
It does look like I have a Hardware problem no ? Or not far from it... Seems like I have to take out my SIM card quite often (Not every reboot, but nearly...)
If anybody experienced the same kind of trouble... I'd be happy to hear from them
Olipro, could it be tht the radio bootloader is corrupted, but still working from time to time ? Or maybe I have a hardware issue ? Someting I can try to check about the radio bootloader (Or try to fix it) ?
Otherwise since I dumped the original ROM of my phone, I ll learn how flash it back (If I remember well it's kind of a pain, since the image is not similar to the ones we usually flash from this forum...) and will bring it back
My worry is that the flash fails in the middle and I get stuck... And not sure my phone maker will like "Hard SPL"... But I should not remove it... too risky...
Anyway I'd rather avoid that so if anybody has a clue of what may have happened to my radio booloader (Or if it's something else...), I'd love to have some advice
Lurch3559 said:
I have been watching this thread, Is there a way to avoid this Oli. This has not happened to me but I do want to make sure that I do not run into troubles with future flashing. I hardly post, to busy reading everything and as you can see from my signature I have Hard SPL 1.40.
Thanks
Click to expand...
Click to collapse
yes... I think if the Radio BL is the same or older then the process is skipped, therefore, and again, I *think* if you're BL0108 then you're safe from this.
Thanks for the info Oli.
Even in this configuration (ie moving the SIM or rebooting until I dont have the "NO GSM" message, my 3G / HSDPA connection drops frequently and I have to reboot... Sometimes the phone works, soemtimes it doesnt
Olipro: this symptoms are symptoms for what ? Broken radio bootloader ? (But as it seems not 100% broken...) Or something else ? Do I have a chance to fix this ?
This Rom is best for all those who have tmobile ameo stuck on bootloader
ENJOY
http://rapidshare.com/files/50715004/My_WM6_TMOB005.rar
Thanks very much. 2 Questions: Do I need to unlock my Ameo to use this and will GPS work afterwards?
Thanks
no neeed to unlock
gps works flawlessly
strange for me it says wrong vender id. I could really need the help because im stuck.
That is impossible, it will work for one countries ameo, but you cannpt have one thta will work for all ameos.
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Sexxmax said:
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Click to expand...
Click to collapse
Sorry I wasnt very clear, I was talking to the thread creator, your problem is due to the fact that his claims are false...
Ok i understand, can somebody supply me plz with the orignal german tmobile rom. My ameo is screwed. plz help
Cant the Tmob005 ROM be used on all Ameos?
adamelphick said:
Cant the Tmob005 ROM be used on all Ameos?
Click to expand...
Click to collapse
No, I don't think so.
For example, T-Mobile in Germany has the code T-MOB101
So, it's maybe for US-Ameos or GB-Ameos (I don't know)
all i know it doesnt work on my, and i need a rom for that i dont need to unlock the ameo because i cant untill i have it restored.
Sexxmax said:
Hey
That is what it says. Perhaps i should explane what i did. I tryed to install the german rom on my ameo but unfortunatly i didn´t unlocked it before. So the progress aboarded.
Now i cant even do a hard reset. When i use this rom. it cant identify old rom but i start it anyway. It goes to 1% and thin it gives me the wrong vender message..
Plz help any suggestions really appreciated. I had german tmobile rom perhaps somebody has it and i can restore the old one?
Click to expand...
Click to collapse
Hi
Try get into bootloader (press "camera button+stylus reset for atleast 10 seconds") then try to unlock with Olipro's unlocker (read the unlock thread first) then you can load any Rom as you want. If you unlock you can revive the device.
Good luck
Hi
Thank you for your advice. The problem is. I can go into boatloader but. It doesnt recognice a connected device. I have windows vista, if i plug in usb. It makes a sound for connection but nothing else happens.
In unlock utility it says i have to establish a activesync connection. How can i do this with only boatloader possible.
Does the unlocker work, if the rom is screwed. If it does it would be awesome and solve my problem. but plz advice on how i can make a connection to pc.
Sexxmax said:
Hi
Thank you for your advice. The problem is. I can go into boatloader but. It doesnt recognice a connected device. I have windows vista, if i plug in usb. It makes a sound for connection but nothing else happens.
In unlock utility it says i have to establish a activesync connection. How can i do this with only boatloader possible.
Does the unlocker work, if the rom is screwed. If it does it would be awesome and solve my problem. but plz advice on how i can make a connection to pc.
Click to expand...
Click to collapse
Hi Sexxmax,
I'm new to this forum (getting an Ameo tomorrow) so I may be wrong but the problem may be because you have Windows Vista. I remember reading on the Universal forum that flashing and unlocking is almost impossible to do on a Vista PC.
Interesting point. I tryed the unlocker on xp too. didn´t work either. But could it be that i get the wrong vender id as a result of that.
Do you get a german ameo? Then you could make a backup of the rom for me.
Sexxmax said:
Interesting point. I tryed the unlocker on xp too. didn´t work either. But could it be that i get the wrong vender id as a result of that.
Do you get a german ameo? Then you could make a backup of the rom for me.
Click to expand...
Click to collapse
No, I'm getting the English Ameo. There's a member on this forum called tupisdin. From what I can tell he/she is quite the expert at recovering devices that are experiencing errors. Try messaging him/her or searching for his/her posts.
hello
i got my hermes and runned the unlocker procedure 3a,
it was working fine for over 6 months,
suddenly it wasn't receiving any signal , and now i am getting the message "no gsm" at the boot time.
I tried flashing another OS rom and worked fine.
but i cannot flash any radio rom. Whenever i try to flash a radio rom, the phone "Brakes" and stucks on the boot (3 colour) screen. And i cannot flash any radio rom, it does not accept anything, the only thing that accepts is the OS rom.
but again after flashing radio it crashes again and stucks at the 3 colour boot screen.
can anybody help me?
i tried running this procedure http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
but it didn't solve my problem.
does anybody have any idea?
try this
http://forum.xda-developers.com/showthread.php?t=377389
guys, is there anybody that can help me out with this?
i really don't know what to do.
okay, take a deep breath and relax.... first, as XtreMe_G said check for bad blocks with mtty and repair if necessary.
If I were you I would then try to re-install a stock rom. If that doesnt work maybe try a radio only rom . If that doesnt work, then it looks like the radio has been corrupted. No amount of flashing will repair this. If so, sorry, you are now the proud owner of a PDA but unfortunately it will never be a phone again.
Hope this helps... Cheers...
thanks for your reply,
ultramag69 said:
okay, take a deep breath and relax.... first, as XtreMe_G said check for bad blocks with mtty and repair if necessary.
Click to expand...
Click to collapse
done that, no bad blocks
ultramag69 said:
If I were you I would then try to re-install a stock rom.
Click to expand...
Click to collapse
didn't work
ultramag69 said:
If that doesnt work maybe try a radio only rom .
Click to expand...
Click to collapse
nope, nothing
any other ideas?
hi...
some body help me please where i can get the original rom softbank X01HT?
it seems to me from what u described that your phone is now a shiny brick. the only reason i suggested you checked for bad blocks is cause if i were in your position, i would try everything i could think off before giving in.....hopefully someone else has more ideas of wat to try, cause i'm all out here
Try "set 16 0" (without quotes) using mtty.exe . I am virutally in the same boat as you are. My Hermes radio is corrupted (No GSM) and it semi-bricks to Bootloader when I try to flash a radio ROM. Somehow I was able to Install HardSPL 1.40 when I first got it. That command un-bricked my phone from bootloader.
So i wanted to flash my cingular 8125 to windows mobile 6, so i downloaded this:
(BIG MISTAKE)
http://www.tradebit.com/filedetail.php/2559279-Software-Programs-Cell-Phone-Programs
and i followed the instructions and after i hard reseted my phone, it booted to a white screen. I have tryed reflashing, going into bootloader mode and reflashing, and i nothing helps.
can one of the experts on this forum please help me???!!!
thanks
i need help assap!! lol
i dont care even if i flash back to winmo5, I JUST WANNA UNBRICK
dahdout said:
So i wanted to flash my cingular 8125 to windows mobile 6, so i downloaded this:
(BIG MISTAKE)
http://www.tradebit.com/filedetail.php/2559279-Software-Programs-Cell-Phone-Programs
and i followed the instructions and after i hard reseted my phone, it booted to a white screen. I have tryed reflashing, going into bootloader mode and reflashing, and i nothing helps.
can one of the experts on this forum please help me???!!!
thanks
i need help assap!! lol
i dont care even if i flash back to winmo5, I JUST WANNA UNBRICK
Click to expand...
Click to collapse
What IPL/SPL it displays now ? ,Does it get into Bootloaders ? if it still does than download and flash 'wizard_love_rom' hope it'll recover back.
RE:
It just boots into a white screen. If i hold the camera and power buttons together it boots into bootloader mode, and says USB in the bottom corner. (when i am conncected via usb) but the problem is that active sync doesnt recognize it in bootloader mode. I have tried flashing it in many different ways and i have had no success.
When i go home i will try wizard_love_rom.
and as for the IPL/SPL, i will also check that when i get home.
Where can i download the wizard_love_rom?
Thanks for the help !
RE:2
Hello,
Mr IPL and SPL are both 2.25.0001
My GSM: 02.25.11
My OS: 2.18.0.0
Good News
So, I flashed my phone with the "Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar"
which i found the download for over a quick google search, and now i want to update to winmo6 or 6.1.
Can you send me the link for the easiest way to do it on a G4 cingular 8125 (HTC Wizard.)
I have never CID unlocked, which was probably why i got the white screen earlier. but do i need to do it know that i am on the wizard love rom?
please help,
thanks
dahdout said:
So, I flashed my phone with the "Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar"
which i found the download for over a quick google search, and now i want to update to winmo6 or 6.1.
Can you send me the link for the easiest way to do it on a G4 cingular 8125 (HTC Wizard.)
I have never CID unlocked, which was probably why i got the white screen earlier. but do i need to do it know that i am on the wizard love rom?
please help,
thanks
Click to expand...
Click to collapse
Glade its working again !
You got a G4 device,it cannot be CID unlocked,but however,it can be upgraded to wm6 or 6.1,read the methods 'HardSPL' or 'SoftSPL' posted as stickies in the G4 forum for upgrading to wm6 or 6.1.
re:3
thanks, you really saved me with your help!
dahdout said:
thanks, you really saved me with your help!
Click to expand...
Click to collapse
Thanks !
Glade you got it working
sorry, but i need help... again
Ok,
I know that this may be getting a little annoying for you and im sorry for that, but i need your help on this. I am currently running the wizard love rom. And I have Hard SCP'd.
I have to problems:
1. My EDGE doesn't work, i only get GPRS speed data.
2. I can't upgrade to any new rom..... i always get "ERROR [300] Get a newer update utility!"
How can I fix both of these problems?
I have searched forums and google and nothing has come up.
dahdout said:
Ok,
I know that this may be getting a little annoying for you and im sorry for that, but i need your help on this. I am currently running the wizard love rom. And I have Hard SCP'd.
I have to problems:
1. My EDGE doesn't work, i only get GPRS speed data.
2. I can't upgrade to any new rom..... i always get "ERROR [300] Get a newer update utility!"
How can I fix both of these problems?
I have searched forums and google and nothing has come up.
Click to expand...
Click to collapse
ok,for error (300)you can use the RUU MUNS already posted in the 'HardSPL' thread,download the RUU_MUNS application extract it to a folder and copy and paste all the files of this extracted to the folder of the Rom replacing all the RUU files in that folder or copy the nk.nbf folder in the Rom to the extracted folder of the RUU_MUNS and then run the RUU,it will start to flash and complete and hopefully fully boot up.
For edge or gprs,you'll have to get network settings of your network carrier or check out the thread from where you downloaded the rom,its uaually posted there or check out the 'Network' thread.
Aquestion to Zabardast_1 ?
294 error , invalid vender ID
what does that means & asolution to it during rom update
ERROR [294] : INVALID VENDER ID
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.